Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CNC HORIZONTAL MACHINING CENTER (SOLE SOURCE)

Active
SPMYM226Q7901Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through DLA Maritime - Puget Sound, is seeking a CNC Horizontal Machining Center under solicitation SPMYM226Q7901. This is a sole source procurement categorized under NAICS code 333998. The opportunity was posted on August 27, 2026, with a response deadline of August 31, 2026, at 5:00 PM. The contract is managed by the office located in Bremerton, Washington, with the actual place of performance situated in Silverdale, Washington. There are no set-asides applied to this solicitation. Interested parties can contact Tricia Wintersteen for further information regarding this requirement.

General Info

DOD sole source procurement for CNC Horizontal Machining Center in Silverdale, Washington.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

Silverdale, WA, 98315, USA

Set-Aside

NONE

Documents

(9)

26Q7901 Salients - CNC Machine Specifications

PDF•3 pages•specifications

DD Form 1423-1 CDRL – COTS Manuals and Supplemental Data

PDF•2 pages•cdrl

26Q7901 Trident Refit Facility, Bangor Site Requirements

PDF•13 pages•sow

TRF Bangor Project 412 320 - Existing Equipment Removal Requirements

PDF•1 page•sow

Exhibit C CDRL Warranty Performance Report

PDF•2 pages•cdrl

DD Form 1423-1 CDRL - NRTL Certification

PDF•2 pages•cdrl

26Q7901_JA_KO+SIGNED_ETJ_Redacted.pdf

PDF

Project #412 320 CNC Horizontal Machining Center Specification

PDF•8 pages•specifications

SPMYM226Q7901 - Solicitation/Contract for CNC Horizontal Machining Center

PDF•49 pages•solicitation

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / Agency
Department Of Defense → DLA Maritime - Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5000, USA
Contacts
TRICIA WINTERSTEEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

SEE ATTACHED SOLICITATION 

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
FILTER, FLUID
Solicitation # SPE7M1-26-T-315V
This solicitation, issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-315V, is for the procurement of 421 fluid filters identified by NSN 4330-01-677-0313. The contract requires delivery within 83 days after receipt of order and is categorized under NAICS code 333998. Performance is located in New Cumberland, Pennsylvania. The contract is subject to strict technical and quality requirements, including DLA packaging standards, configuration change management, and origin inspection and acceptance. Notably, the item involves technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Additionally, compliance with Cybersecurity Maturity Model Certification Level 2 is required.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
HANDLE, CRANK
Solicitation # SPE7L0-26-T-0439
This contract is for the procurement of 125 crank handles, identified by NSN 5340-01-536-0999 and part number 6431768-01M1. The order is designated as a critical application item and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Delivery is required within six days of the order, with a final required delivery date of September 30, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards under MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals in the manufacturing of the items.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-308Y
This contract, identified as SPE7M1-26-T-308Y, is a solicitation from the Department of Defense Maritime Supply Chain for the procurement of fluid filter elements under NSN 4330016733184. The total requirement consists of 53 units divided into two line items: 24 units for delivery to DLA Distribution Albany in Georgia and 29 units for delivery to DLA Distribution San Joaquin in California. The delivery timeline is set for 146 days after receipt of order, with an original required delivery date of October 10, 2026, and a need ship date of February 2, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination. All items must adhere to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and RP001 palletization guidelines.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
HOUSING, NOZZLE
Solicitation # SPE8E6-26-T-4371
This contract is for the procurement of two nozzle housings under solicitation SPE8E6-26-T-4371, identified by NSN 4210-01-518-5329. The items are associated with part numbers 109304 from Akron Brass Company and 602740-40 from E-One, Inc. Delivery is required within 159 days, with a need ship date of February 15, 2027, and an original required delivery date of January 7, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging based on whether the material is classified as hazardous under FED-STD-313. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies. Inspection and acceptance will take place at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER, FLUID
Solicitation # SPE7M1-26-T-315Z
This contract is a solicitation for the procurement of one fluid filter, identified by NSN 4330998702801 and part number H06825200 from MacTaggart, Scott & Co. Ltd. The item is designated as a critical application item and must be delivered to the USS Michael Monsoor (DDG 1001) within 20 days. The delivery terms are FOB Destination, with inspection and acceptance also occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking standards under MIL-STD-129. A key environmental restriction prohibits the use of Class I ozone-depleting chemicals in the delivered items. Shipping must be completed via the fastest traceable means, and the use of parcel post is explicitly forbidden.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
Federal
SPALT PLATE
Solicitation # N0010426QAD14
This contract is a solicitation for the manufacture of a Spalt Plate, identified by part number 7201078-003 and cage code 53711. The procurement is managed by the Navsup Weapon Systems Support Mech and is designated as a total small business set-aside. The contractor is responsible for all shipping expenses to the specified DODAAC locations, and the delivery is based on FOB-Destination terms. The requirements mandate strict adherence to specific military standards for marking, including MIL-STD-130 and MIL-STD-1285, and configuration management per MIL-STD-973. Government source inspection is required under FAR 52.246-2 to ensure compliance with material and physical specifications. All packaging must align with MIL-STD 2073, and the contractor must maintain inspection records for 365 days following final delivery.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
GLOVES,DISPOSABLE,
Solicitation # N0010426QAD16
This contract is a solicitation for the manufacture and supply of disposable gloves, specifically part number 40101-350 from cage 01MX7. The agreement is a fixed-price contract with FOB-destination terms, meaning the contractor is responsible for all shipping expenses to the specified Department of Defense locations. Key requirements include adherence to specific military standards for marking and configuration control, as well as a strict shelf-life mandate requiring that items have at least 85 percent of their shelf-life remaining upon receipt by the government. Government source inspection is required per FAR 52.246-2 to ensure quality compliance. The contractor must maintain all inspection records for 365 days following final delivery. Packaging and preservation must comply with MIL-STD 2073, and the contract includes specific cybersecurity maturity model certification requirements and security prohibitions. All contractual communications are considered issued when sent via mail, facsimile, or electronic commerce methods.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333998
New
DIBBS
47--UNION,PIPE
Solicitation # SPE7M2-26-U-0349
Solicitation SPE7M2-26-U-0349, issued by the Department of Defense Nuclear Reactor Program under DLA Land and Maritime, seeks quotes for the procurement of pipe unions identified by NSN 4730014213460. The requirement consists of 174 units with a delivery timeline of 87 days after the order. This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 26 units, with an estimated one order per year. Items are to be shipped to various CONUS and OCONUS DLA Depots via consolidation and containerization points. Approved sources are listed as 0JC12 018347-FI/BV and 72423 6915-300. All quotes must be submitted electronically by the deadline of September 10, 2026. This solicitation falls under NAICS code 333998 and is managed by the office located in Columbus, Ohio.
NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
Federal
G4 Portable Scales
Solicitation # W912JM26QA026
The Department of Defense, specifically the W7M3 Uspfo Activity Ga Arng, is soliciting bids for G4 Portable Scales and lift systems under solicitation number W912JM26QA026. This opportunity is designated as a total small business set-aside under NAICS code 3339998. The performance of the contract will take place in Marietta, Georgia. Interested parties must submit their responses by the deadline of September 4, 2026, at 11:00 AM. Primary coordination for this requirement is handled by Ladell Holmes, with Jim Shuman serving as the secondary point of contact. The solicitation was officially posted on August 27, 2026.
W7M3 Uspfo Activity Ga Arng

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
Federal
43--SUPPORT,COALESCER
Solicitation # SPE4A526T395N
DLA Aviation is seeking quotes for the procurement of 56 units of coalescer support, identified by NSN 4330014567935. The items are to be delivered to the DLA Distribution Depot in Oklahoma within 290 days after the order is placed. The approved source for this requirement is 70210 195789-2. This opportunity is issued as a Request for Quote under solicitation number SPE4A526T395N with a response deadline of September 4, 2026. All quotes must be submitted electronically via the provided system, as hard copies of the solicitation and technical drawings are not available. The procurement falls under NAICS code 333998 and is managed by the Department of Defense office located in Richmond, Virginia.
DLA Aviation

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
Federal
DUST PLUG
Solicitation # N0010426QAC01
This contract pertains to the manufacture of a DUST PLUG under solicitation number N0010426QAC01, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The item must strictly comply with drawing number 3044652 and adhere to all specified military standards, including material and physical requirements for the DANFOSS/HANSEN LINE P/N SDC3HK with CAGE code 0X660. A key update notes that the previously used 17-1 crimping tool has been deprecated, and the 31-B crimping tool is now the approved alternative. Delivery is required within 90 days, and the product must be manufactured and inspected under the Government’s required inspection protocol per FAR 52.246-2, with all quality assurance processes integrated into the contractor’s internal systems. The contractor is responsible for maintaining inspection records for 365 days post-delivery and must follow MIL-STD-130 and other applicable standards for marking and identification. Configuration control is governed by MIL-STD-973, requiring formal procedures for engineering changes, deviations, and waivers, all submitted to the designated contracting officer. The contract is issued as a total small business set-aside and includes cybersecurity maturity model certification requirements, as well as security prohibitions and exclusions under recent deviation directives. Payment is processed via Wide Area WorkFlow with instructions directed to navsupwawf.wss.ftc@us.navy.mil, and all contractual documents are considered issued upon electronic transmission. Packaging must conform to MIL-STD-2073, and all referenced documents, including drawings and standards, are accessible via SAM.gov using the solicitation number. The point of contact for inquiries is Jennifer L. Henry, reachable by email and phone, with the place of performance unspecified beyond the issuing office. Federal specifications and standards required for compliance can be obtained through DODSSP or direct requests to specific Navy logistics offices, and special handling applies for NOFORN and classified documents. All contractual obligations are binding upon proposal acceptance, and failure to meet technical, marking, or documentation requirements may result in non-acceptance of deliverables.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333998
New
Federal
42--DRY CHEMICAL,FIRE E
Solicitation # SPE8E626T4385
The Department of Defense, through DLA Troop Support, is seeking quotes for the procurement of 40 units of dry chemical fire extinguishers under solicitation number SPE8E626T4385. The items are to be delivered to DLA Distribution San Joaquin within 299 days after the order is received. This requirement falls under NAICS code 333998 and is being managed by the office located in Philadelphia, Pennsylvania. Interested and responsible sources must submit their quotes electronically by the deadline of September 8, 2026. The solicitation is available as an RFQ via the provided electronic link, and all technical drawings or military specifications must be retrieved electronically. Inquiries regarding this procurement should be directed to the buyer via the DIBBS portal.
DLA Troop Support

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 333924
New
Federal
Supply of a Diesel-Powered Re-Reeving Machine
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 10 hours
View Details
NAICS: 333618
New
Federal
COMPRESSOR PARTS OVERHAUL/REBUILD (SOLE SOURCE)
Solicitation # SPMYM226Q7905PRESOLICITATION
DLA Weapons Support Puget Sound is seeking a sole source, firm-fixed-price contract for the overhaul and rebuild of compressor parts. The requirement, identified by solicitation number SPMYM226Q7905, will be issued as an unrestricted sole source using commercial and simplified acquisition procedures. Delivery is specified as FOB Destination to Bremerton, Washington, and the Non-Manufacture Rule will not apply to this procurement. The solicitation is expected to be posted on SAM.gov around September 2, 2026. Prospective bidders must submit signed and completed quotes via email or fax to be considered responsive. Contractors required to implement NIST SP 800-171 must provide a current assessment per DFARS 252.204-7019, although items classified as Commercial Off The Shelf are exempt from this requirement provided they are identified during the bidding process.
Other Engine Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336214
New
Federal
RE-REEVING MACHINE
Solicitation # SPMYM226Q0127
Solicitation SPMYM2-26-Q-0127 is a request for quotes issued by the Department of Defense, specifically DLA Maritime - Puget Sound, for the procurement of one re-reeving machine. The total award amount is listed at 26,000 dollars. Quotes must be submitted via email to Kim Vo and must be received by 9 AM Pacific Time on August 28, 2026. The place of performance and delivery is Bremerton, Washington, and pricing must be quoted as FOB Destination. To be considered, submissions must be fully completed and signed, including specific signatures in boxes 30 a, b, and c and a review of box 28. Required documentation includes the company CAGE code or DUNS number, business size designation, lead time for delivery, the manufacturer's name and country of origin, and the specific part number. Additionally, bidders must provide original manufacturer specification sheets and a redacted quote or email from the manufacturer or distributor.
Travel Trailer and Camper Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 10 hours
View Details
NAICS: 335999
New
Federal
SPRING MOTOR
Solicitation # SPMYM226Q0187
This solicitation, issued by DLA Maritime Puget Sound for a spring motor, is a total small business set-aside under NAICS code 335999. Interested contractors must submit a signed and completed solicitation via email to the primary point of contact by August 28, 2026, at 12 PM. Quotes must be provided as FOB Destination to Bremerton, Washington, and must include specific details such as the manufacturer's name, address, country of origin, and the estimated lead time or delivery date. Compliance with NIST SP 800-171 is required for awardees unless the items are identified as Commercial Off The Shelf, in which case they are exempt. To be considered responsive, bidders must provide their CAGE code, point of contact information, and complete all required certifications in Sections A, B, F, and K, as well as sign the necessary blocks on page one of the solicitation.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 13 hours
View Details
NAICS: 314120
New
Federal
STARBOARD CURTAIN
Solicitation # SPMYM226Q0128
Solicitation SPMYM2-26-Q-0128 is a request for quotes for a starboard curtain issued by the DLA Maritime Puget Sound office of the Department of Defense. Interested vendors must submit their quotes via email to Kim Vo by 10 AM Pacific Time on August 28, 2026. Pricing must be quoted as FOB Destination Yokosuka, Japan. To be considered, submissions must include a fully completed and signed solicitation, the company's CAGE code or DUNS number, and a designation of small or large business status. Required documentation includes the part number, lead time for delivery, the name and country of the manufacturer, and original manufacturer specification sheets. Additionally, vendors must provide a redacted quote and email from the manufacturer or distributor.
Curtain and Linen Mills

POSTED

about 18 hours ago

DEADLINE

in about 11 hours
View Details
NAICS: 332510
New
Federal
REVOLUTION BASE ROV
Solicitation # SPMYM226Q0185
Solicitation SPMYM226Q0185 is a firm fixed-price supply contract issued by the Department of Defense, specifically DLA Maritime Puget Sound, for the procurement of Revolution Base ROV equipment, including dual chamber batteries. This requirement is designated as a 100 percent total small business set aside and is being conducted as a sole source procurement with Deep Trekker Inc. The delivery is specified as FOB Destination to Bremerton, Washington, with the final delivery date to be adjusted at the time of award. Interested offerors must submit fully completed quotes, including unit price line-item pricing, manufacturer information, and all required representations and certifications, by August 28, 2026, at 7:00 AM Pacific Daylight Time. All submissions must be sent via email and the offeror must maintain current registration in the System for Award Management. Proposals that do not cover the entire specified effort may be deemed unacceptable.
Hardware Manufacturing

POSTED

2 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 334412
New
Federal
ANALYZER, VIBRATION
Solicitation # SPMYM226Q0183
Solicitation SPMYM226Q0183 is a request for a vibration analyzer issued by the Department of Defense, specifically DLA Maritime - Puget Sound. This procurement is designated as a 100 percent total small business set aside and will be awarded as a firm fixed-price supply contract. The delivery is set as FOB Destination to Bremerton, Washington, with the final delivery date to be adjusted at the time of award. Interested offerors must submit fully completed quotes by August 28, 2026, at 7:00 AM Pacific Daylight Time. To be considered acceptable, submissions must include unit price line-item pricing, completed representations and certifications, manufacturer information for proposed items, and a signed copy of the full solicitation package. Additionally, firms must maintain current registration in the System for Award Management and are encouraged to monitor the solicitation site for any amendments. All inquiries regarding this requirement should be directed to the primary point of contact via email.
Bare Printed Circuit Board Manufacturing

POSTED

2 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 335312
New
Federal
MAGNETEK DRIVE
Solicitation # SPMYM226Q0192
Solicitation SPMYM226Q0192 is a request for a Magnetek Series 5 VFD, issued by the Department of Defense through DLA Maritime Puget Sound. This is a 100 percent total small business set aside under NAICS code 335312, utilizing commercial and simplified acquisition procedures in accordance with FAR Parts 12 and 13.5. The resulting award will be a firm fixed price supply contract with FOB Destination delivery to Bremerton, Washington. Interested offerors must submit fully completed quotes, including unit price line items, all required representations and certifications, and manufacturer information, by August 28, 2026, at 07:00 AM Pacific Daylight Time. To be considered, firms must maintain current registration in the System for Award Management and provide a complete and signed solicitation package. All inquiries regarding this procurement must be submitted via email to the primary point of contact, Denise M. Quist.
Motor and Generator Manufacturing

POSTED

2 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 333517
New
Federal
MANUAL LATHE
Solicitation # SPMYM226Q0156
This solicitation, issued by DLA Maritime - Puget Sound under solicitation number SPMYM226Q0156, seeks quotes for a manual lathe. The opportunity is a total small business set-aside under NAICS code 333517. All quotes must be submitted via email to the primary point of contact by August 28, 2026, at 10:00 AM PST. Delivery is required FOB Destination to Silverdale, Washington. To be considered responsive, bidders must submit a signed and completed solicitation including the contractor's cage code, point of contact, pricing, lead time, and manufacturer details including the country of origin. Contractors required to implement NIST SP 800-171 must provide a current assessment not older than three years, although items classified as Commercial Off The Shelf are exempt from this requirement provided they are identified during the solicitation period.
Machine Tool Manufacturing

POSTED

2 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 333310
New
Federal
VACUUM PRODUCER QC-150
Solicitation # SPMYM226Q0180PRESOLICITATION
DLA Weapons Support Puget Sound is seeking a firm-fixed-price contract for three Hurricane QC-150 vacuum producers. This procurement is designated as a 100 percent small business set-aside and will be conducted as a brand name or equal solicitation under commercial and simplified acquisition procedures. The delivery is set as FOB Destination to Silverdale, Washington, and the Non-Manufacture Rule applies to this requirement. The solicitation, numbered SPMYM2-26-Q-0180, is expected to be posted on SAM.gov around August 31, 2026. Prospective bidders must submit signed and completed solicitations via email or fax to be considered responsive. While NIST SP 800-171 compliance is required for applicable contractors, items identified as Commercial Off The Shelf are exempt. Any submissions offering an equal alternative to the brand name must include detailed specifications for consideration.
Commercial and Service Industry Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332212
Federal
Supply of Setting Rings (2.4" and Other Sizes)This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, requires the supply of 14 precision setting rings designed for the calibration and verification of TESA/Brown & Sharpe internal micrometers. The order specifically includes a 2.4 inch ring and requires all units to be compatible with the 599-281 series system while providing certified dimensional accuracy. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance for this requirement will take place in Bremerton, Washington, with the solicitation posted on August 10, 2026.
Hand and Edge Tool Manufacturing

POSTED

18 days ago

DEADLINE

N/A
View Details
NAICS: 332212
Federal
Supply of TESA/Brown & Sharpe Intrimik Internal Micrometers (0.7"–7.0")This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, involves the procurement of 29 TESA/Brown & Sharpe Intrimik precision internal micrometers. These analog tools, ranging from 0.7 to 7.0 inches, are designed under the ABBE principle to ensure high-accuracy measurements and will serve as direct replacements for existing 599-281 series tools within PSNS toolrooms and calibration laboratories. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance of the contract will take place in Bremerton, Washington, with the official posting date set for August 10, 2026.
Hand and Edge Tool Manufacturing

POSTED

18 days ago

DEADLINE

N/A
View Details