Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

CNC Lathe Installation and Commissioning

Active

State & Local

Response Deadline10/30/2026, 03:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for CNC Lathe Installation and Commissioning involves the physical installation, leveling, electrical connection, and initial calibration of an Okuma lathe for prime contractors on Montana State University projects. The scope of work includes leveling the machine bed, connecting power and air supplies, performing initial test cuts, and verifying all specifications against manufacturer standards using precision electrical testing and leveling tools. The project requires the use of certified CNC technicians to ensure the delivery of a fully commissioned and operational lathe. Interested parties should note the response deadline of October 30, 2026, and the classification under NAICS code 811310.

General Info

Subcontract for Okuma CNC lathe installation and commissioning at Montana State University.

Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of MSU-SolSour-2027-0873.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Intent to Sole Source Hartwig Okuma Lathe

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 03:30:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMontana

ContactsNo contacts available

OfficeN/A

Organization / AgencyMontana

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs physical installation, leveling, electrical connection, and initial calibration of an Okuma lathe for prime contractors on Montana State University projects. Levels machine bed, connects power and air supplies, performs initial test cuts, and verifies specifications against manufacturer standards using precision leveling and electrical testing tools. Requires certified CNC technicians. Delivers a commissioned and operational lathe.

Similar Contracts

Same NAICS industry code

Generator Load Bank Testing and Certification

Incident Support SECTION(ISS70)

POSTED

about 10 hours ago

DEADLINE

Regional Generator Preventive and Corrective Maintenance

Incident Support SECTION(ISS70)

POSTED

about 10 hours ago

DEADLINE

Request for Information (RFI) - OCONUS Generator Maintenance

Solicitation # 70FB70OCONUSGeneratorMaintenance

The Department of Homeland Security, Federal Emergency Management Agency (FEMA), Logistics Management Directorate, is conducting market research via a Request for Information (RFI) to identify capable contractors for on-site generator maintenance and testing services at five distinct operation locations across four Outside Continental United States (OCONUS) regions. These locations include the Caribbean (Caguas and Coto Laurel, Puerto Rico), Hawaii (Aiea and Wahiawa), and Guam (Barragada). The anticipated scope of work encompasses preventive and corrective maintenance, testing, and general generator support, requiring the provision of key personnel, technician labor, specialized tooling, diagnostic instruments, vehicles, materials, and consumables. The government is specifically interested in personnel qualifications such as EGSA certifications, OSHA safety credentials, and OEM training, as well as the contractor's ability to scale operations to accommodate a 15% to 30% change in active generator inventory. This effort is classified under NAICS code 811310 and Product Service Code J061. The anticipated period of performance is set to begin on June 30, 2027, with the final acquisition strategy to be determined based on the results of this market research. Interested respondents must submit a capability statement of no more than two pages and responses to specific RFI questions within a ten-page limit to the designated contracting officer and specialist by November 5, 2026. As this is an RFI for information gathering purposes per FAR 15.101(c), submissions are not formal offers and do not constitute a binding contract or a commitment of funds by the government.

Incident Support SECTION(ISS70)

POSTED

about 10 hours ago

DEADLINE

Fuel Tank Inspection

Solicitation # W90VN626QA018

Solicitation W90VN626QA018 is a Request for Quotations for a Firm-Fixed-Price commercial services contract to provide fuel tank inspection, testing, and maintenance at Osan Air Base, Republic of Korea. The scope of work includes monthly and annual inspections of 369 active tanks across various size bands, emergency service calls, and repair services. The period of performance consists of a base year from January 1 to December 31, 2027, with four subsequent option years extending through December 31, 2031. This requirement is funded by the Republic of Korea Ministry of National Defense, and the U.S. Government incurs no financial liability. The award will be based on best value using a comparative evaluation process. Key evaluation factors include a practical mock inspection to determine methodology confidence, a staffing plan, a quality control plan, past performance from the last five years, and price, which must be submitted in Korean Won. Technical requirements mandate a two-tier workforce consisting of a Delegated Inspector for monthly tasks and an STI SP001 Certified Inspector for annual and formal inspections, with API 653 certification required for field-erected tanks. Offerors must provide specific ROK business registration certificates and a tax exemption declaration. Per Amendment 0002, the response deadline has been extended to October 16, 2026, at 1300 hours.

0906 Aq Co Contracting Bat

POSTED

about 10 hours ago

DEADLINE

Combined Synopsis/Solicitation Notice: Maintenance of Commissary Refrigeration Systems and Repair of Refrigeration, Heating, Ventilation, and Air Conditioning Systems (HVAC) at Hario and Sasebo, Japan

Solicitation # W912HV26QA013

Solicitation W912HV26QA013 is a combined synopsis and request for quote issued by the USACE Japan District for a firm-fixed-price contract to provide maintenance and repair services for commissary refrigeration, Refrigeration Monitoring and Control Systems (RMCS), and HVAC systems at Hario and Sasebo, Japan. The scope of work includes monthly preventive maintenance and 24/7 emergency response capabilities, requiring a two-hour response time and repair completion within 24 hours. The contract structure consists of a base period from December 1, 2026, through November 30, 2027, with four subsequent option years. Pricing must be quoted in Japanese Yen, and the contract includes a reimbursable item limit of 3,000,000 JPY for unforeseen repairs, while individual parts exceeding 500,000 JPY require prior written approval from the Contracting Officer. Award will be based on the most advantageous quotation, evaluated sequentially across three factors: Past Performance, Technical Capability, and Price. Technical Capability is weighted more heavily than Price and includes assessments of emergency response, personnel qualifications, and environmental compliance. Offerors must submit quotations electronically via the PIEE Solicitation Module. Key requirements include the submission of an organizational chart and qualifications for key personnel within 14 days of award, strict adherence to base access and security protocols for Navy installations, and compliance with various FAR and DFARS clauses, including the Defense Base Act for workers compensation.

W2SN Endist Japan

POSTED

about 10 hours ago

DEADLINE

Keysight Care Enhanced Renewal

Solicitation # N6893627Q0012

The Naval Air Warfare Center, Weapons Division, located in China Lake, California, is seeking quotes under solicitation N6893627Q0012 for KeysightCare Enhanced Renewals for various test equipment. The procurement is intended as a manufacture sole source to Keysight Technologies Inc, though it remains open to authorized distributors. The scope of work includes KeysightCare Assured Services, return to Keysight extended warranties, and calibration services for hardware such as UXG Agile Vector Adapters, UXG Agile Signal Generators, UXA Signal Analyzers, and Infiniium S series oscilloscopes. The general period of performance for these renewals is from March 1, 2026, to February 28, 2027, with a delivery window between November 1, 2026, and February 28, 2027. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, considering both price and other factors. Critical requirements for eligibility include an active SAM registration, current CMMC registration within the PIEE/SPRS portal, and certification through Defense Logistics Information Services for access to controlled unclassified information. The contract utilizes Wide Area WorkFlow for invoicing and payment and requires adherence to strict item unique identification and marking standards per MIL-STD-130 and MIL-STD-129 for items with a unit acquisition cost of 5,000 dollars or more. All shipments are FOB Destination to the Naval Air Warfare Center in China Lake.

Naval Air Warfare Center

POSTED

about 10 hours ago

DEADLINE

H342--CTX Annual Fire Extinguisher Inspection

Solicitation # 36C25727Q0014

Solicitation 36C25727Q0014 is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) to provide comprehensive fire extinguisher maintenance for the Department of Veterans Affairs at CTVHCS facilities in Temple, Waco, and Austin, Texas. The contractor is responsible for providing all labor, equipment, and materials to perform annual, 5-year, 6-year, 10-year, and 12-year inspections and maintenance on various extinguisher types, including stored pressure chemical, carbon dioxide, water, water mist, and wet chemical units. All work must adhere to the current NFPA 10 standards. The scope includes approximately 970 annual inspections and various multi-year maintenance tasks, with a requirement to provide temporary replacements for units removed for servicing. All work must be completed within 60 calendar days of award, with services available on weekdays. The government will utilize a competitive best value selection process based on a comparative analysis of technical capability, past performance from the last five years, and price reasonableness. Proposals must include a signed SF 1449, a completed price schedule, a capability statement, and proof of SDVOSB certification. The contract allows for a total duration not to exceed five years and mandates electronic invoicing in arrears. Key compliance requirements include adherence to the Service Contract Act, with a specified wage of $21.67 for Fire Inspectors, and strict prohibitions against using telecommunications equipment from specific restricted entities. Awardees must also provide a detailed final report including serial numbers and specific room locations for all serviced equipment.

257-NETWORK Contract Office 17 (36C257)

POSTED

about 10 hours ago

DEADLINE

Aviation Support Equipment Load Testing

Solicitation # F2MT2M6146AQ01

This Sources Sought Notice, solicitation number F2MT2M6146AQ01, is a market research effort to identify qualified sources capable of providing aviation support equipment load testing and maintenance for the 433rd MXS/AMXS at Joint Base San Antonio-Lackland, Texas. The scope of work involves non-personal services including annual preventive maintenance inspections, load tests, certification, and both scheduled and unscheduled repairs to ensure the safe operation of aircraft support equipment. All services must adhere to OSHA Standards 1910 and 1926, ANSI Standards B30.16 and B30-5, and applicable Air Force Instructions and Technical Orders. Key deliverables include an initial annual preventive maintenance schedule, certification reports due within two workdays of completion, and repair estimates provided within 48 hours of an initial survey. Performance requirements specify that standard preventive maintenance must be completed and equipment returned within 48 hours of pickup, while approved repairs must be returned within three business days. Interested vendors must submit their response, including company details, CAGE code, and a statement of capability with product literature, to Dalwyn Corporan-Polanco by 10:00 AM CDT on October 20, 2026. This notice is for research purposes only and does not constitute a solicitation or a promise to issue one.

FA3016 502 Cons Cl

POSTED

about 10 hours ago

DEADLINE

Request for Information (RFI) - CONUS Generator Maintenance

Solicitation # 70FB70CONUSGeneratorMaintenance

The Department of Homeland Security, through the Federal Emergency Management Agency (FEMA) Logistics Management Directorate, is conducting market research via a Request for Information (RFI) to identify capable contractors for on-site generator maintenance and testing services. The anticipated requirement focuses on four Continental United States (CONUS) locations: Atlanta, Georgia; Fort Worth, Texas; Greencastle, Pennsylvania; and Tracy, California. The scope of work includes preventive and corrective maintenance, emergency repairs, and load bank testing, with a specific emphasis on complex systems such as Tier 4 Final engines, DEF systems, automatic transfer switches, and parallel switching gear. The government is seeking information on required personnel qualifications, such as EGSA certifications and OSHA safety credentials, as well as recommendations for the most equitable contract type and pricing structure. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 811310 and Product Service Code J061. The anticipated period of performance is set to begin on June 30, 2027, though the final acquisition strategy remains to be determined based on the results of this market research. Interested respondents must submit their capabilities and responses to RFI questions by November 5, 2026, adhering to strict formatting guidelines, including a ten-page limit for responses and a two-page limit for capability statements. All submissions should be directed to Contracting Officer Oneko Dunbar and Contract Specialist Marcia Irizarry-Snyder.

Incident Support SECTION(ISS70)

POSTED

about 10 hours ago

DEADLINE

Boiler Inspections and Testing

Solicitation # 274-ES-FO-FY27-BoilerMaint

The City of Raleigh Engineering Services is soliciting proposals for a five-year contract to provide annual inspection, testing, cleaning, and repair services for boiler systems located throughout North Carolina. The scope of work includes comprehensive maintenance tasks such as component testing for flame safeguards and fuel trains, visual inspections of heat exchangers and burner heads, and specialized cleaning of blower wheels and boiler tubes. The service provider is required to use computerized detectors for fuel leak and combustion testing to optimize efficiency. All manufactured items must meet safety standards from organizations such as ASME, UL, NEMA, or the American Gas Association. Proposals are due by November 5, 2026, and will be evaluated using a weighted scoring system based on merit and cost, with the most qualified firm entering negotiations. The contract requires the provider to ensure all equipment is in safe, working condition before leaving a site and to provide detailed analysis reports upon completion of services. Invoicing is handled via email, mail, or the City's Project Management Software, provided a service ticket is attached. Compliance requirements include registration with the North Carolina Secretary of State, adherence to non-discrimination policies, and certification regarding the boycott of Israel.

City of Raleigh

POSTED

about 17 hours ago

DEADLINE

Material Handling Equipment Inpection, Parts & Repair Services

Solicitation # N1510

Arlington County Government is soliciting a Contract Purchase Agreement for annual inspection, parts, and repair services for material handling equipment (MHE) located in Virginia. The scope of work encompasses routine maintenance, load tests, and MAINMAN assessments for various assets, including manual chain hoists, single girder electric overhead traveling cranes, and pillar jib cranes with electric wire rope hoists. The contractor is responsible for providing all necessary supervision, labor, materials, tools, and equipment, with bid evaluations based on an estimated 96 hours of certified technician labor per year. Additionally, the requirements include the provision of a 30 ft telescopic boom lift and a 5,000 lb warehouse forklift for 12 days per year each. The solicitation, numbered N1510, was posted on October 15, 2026, with a response deadline of November 4, 2026. Award selection is based strictly on price, and all goods are purchased F.O.B. destination in Arlington County. Payment terms are set at Net 45 in USD. Interested suppliers must submit a bid form and the specified pricing sheet, as the amounts listed on Attachment A will govern the final evaluation. Point of contact for this procurement is Buyer Lucas Alexander.

Arlington County Government

POSTED

about 18 hours ago

DEADLINE

Fire Extinguisher Service

Solicitation # 5736

The City of Redding, California, is soliciting bids under solicitation number 5736 for a qualified vendor to provide comprehensive annual fire extinguisher servicing for City-owned buildings and vehicles. The scope of work includes routine maintenance, recharging, and hydrostatic testing in strict accordance with NFPA 10, OSHA, ANSI/UL77, ANSI/UL299, and California State Fire Marshall (CSFM) standards. The selected vendor must furnish all necessary repair parts, provide CSFM-approved new extinguishers, and supply no-charge loaner units if equipment is removed from City premises. Additionally, the vendor is required to support a Fire Department voucher program for public use and provide employee training upon request. Service response times are mandated at 24 business hours for normal calls and 8 hours for emergencies, with a strict prohibition on subcontracting the work. To be eligible, vendors and their technicians must be certified and licensed by the CA Office of the State Fire Marshall, with a type F license required for halon services. Bidders must also possess a City of Redding business license and maintain extensive insurance coverages, including Commercial General Liability, Professional Liability, and Pollution Liability. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Administrative terms include monthly invoicing with Net 30 payment terms and a one-year warranty on all work and materials. Performance takes place at various City locations, including the Fire Administration Office on Cypress Avenue.

City Of Redding, California

POSTED

about 18 hours ago

DEADLINE

More opportunities from Montana

Same awarding agency

Heavy Machinery Transport and RiggingThis subcontract for Heavy Machinery Transport and Rigging involves the specialized transportation, unloading, and positioning of an industrial lathe for prime contractors working on Montana State University projects. The selected provider will be responsible for loading the machinery from the distributor, transporting it to the MSU campus, and utilizing professional rigging equipment such as cranes, forklifts, or skates to move the lathe into the Mechanical and Industrial Engineering Department. To ensure safety and compliance, the contractor must possess a valid CDL and all necessary rigging certifications. The scope of work concludes once the lathe is safely delivered and positioned at its final installation point. Interested parties should note the response deadline of October 30, 2026, for this project categorized under NAICS code 484220.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 6 hours ago

DEADLINE

Okuma LB2000EX-III Lathe SupplierThis subcontract involves the procurement, configuration, and delivery of one Okuma LB2000EX-III industrial CNC lathe, or a technically equivalent model, for the Montana State University Department of Mechanical and Industrial Engineering. The supplier is responsible for ensuring the equipment meets all specific technical requirements of the department and is delivered as a fully functional unit to the university site to support prime contractor projects. The opportunity was posted on October 15, 2026, with a response deadline of October 30, 2026. Classified under NAICS code 423830, the contract is managed by the state of Montana, and interested parties can find further details through the provided SciQuest bidding portal.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Intent to Sole Source Hartwig Okuma Lathe

Solicitation # MSU-SolSour-2027-0873

Montana State University's Department of Mechanical and Industrial Engineering has issued an Intent to Sole Source notice, solicitation number MSU-SolSour-2027-0873, to procure an Okuma LB2000EX-III lathe from Hartwig. Posted on October 15, 2026, the notice serves as an invitation for other potential vendors to demonstrate if they can provide an equivalent product. Interested parties must submit a detailed response via the eMACS portal by October 30, 2026, at 9:30 AM MDT. Required submissions include comprehensive company information and a detailed capability statement explaining how the vendor can meet the requirements outlined in the attached Letter of Intent. While this is not a formal request for competitive proposals, the university is seeking technical descriptions from vendors who believe they can offer a comparable solution. The contract administration specifies payment terms of 0% O, Net 30. Jeni Luft is listed as the primary point of contact for this action. No specific contract value, delivery schedule, or formal evaluation weights have been disclosed, as the primary intent is to validate the sole source justification for the specified Okuma lathe.

Machine Tool Manufacturing

POSTED

about 6 hours ago

DEADLINE

Industrial Electrical Integration for CranesThis subcontract for Industrial Electrical Integration for Cranes involves the installation of electrical power supply and control systems for prime contractors working on Montana Department of Transportation facility projects. The scope of work includes running electrical conduits, wiring hoist motors, and installing pendants or remote control systems in strict accordance with NEC and local codes to deliver fully powered and operational crane systems. Qualified bidders must provide a licensed Master Electrician to oversee and execute the technical requirements of the project. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of November 3, 2026. This opportunity falls under NAICS code 238210 and is managed through the State of Montana.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Overhead Crane Installation and RiggingThis subcontract for Overhead Crane Installation and Rigging involves the installation and commissioning of overhead bridge cranes for prime contractors working on Montana Department of Transportation facility projects. The scope of work requires the contractor to unload, position, assemble, and secure crane units at the Kalispell shop, ensuring all work adheres to facility drawings and manufacturer guidelines. The process involves the use of heavy-lift jacks and rigging equipment to deliver fully operational crane systems. The opportunity was posted on October 14, 2026, with a response deadline of November 3, 2026. Classified under NAICS code 238990, the project is managed by the state of Montana. Interested parties can find further details through the SciQuest bidding portal.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Overhead Bridge Crane and Hoist Equipment SupplyThis subcontract involves the manufacture, fabrication, and supply of two overhead bridge crane and hoist units for prime contractors working on Montana Department of Transportation facility projects. The selected provider is responsible for ensuring all equipment is built according to specific MDT technical specifications and facility drawings, while providing detailed descriptive literature to verify quality and compliance. The scope of work concludes with the delivery of the two completed units to the Kalispell shop. This procurement is categorized under NAICS code 333911 and is managed through the State of Montana.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Overhead Bridge Cranes and Hoist Equipment for Kalispell Shop

Solicitation # MDT-IFB-2027-3235R

The State of Montana, through the Montana Department of Transportation, is issuing an Invitation for Bid under solicitation number MDT-IFB-2027-3235R to procure, deliver, and install two lump sum units of overhead bridge cranes and hoist equipment for its shop located in Kalispell, Montana. The solicitation was posted on October 14, 2026, with a response deadline of November 3, 2026, at 2:00 PM MST. Bidders must submit their responses via the eMACS portal and are required to provide detailed manufacturer descriptive literature to demonstrate quality and compliance with all technical specifications and facility drawings. To be considered for award, bidders must accept a comprehensive set of prerequisites, including MDT terms and conditions, delivery language, warranty requirements, and a draft purchase order. A critical compliance requirement is the certification of non-discrimination against firearms entities or trade associations in accordance with 30-20-301, MCA. The contract features payment terms of 0% Net 30, and the primary point of contact for this procurement is Rhonda Peters. The State reserves the right to further examine products to ensure they meet all stated specifications.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Underbridge Inspection Truck

Solicitation # MDT-IFB-2027-2324R

The State of Montana, through the State Procurement Services Division on behalf of the Department of Transportation, is issuing an Invitation for Bid (IFB) under solicitation number MDT-IFB-2027-2324R for the purchase of one underbridge inspection truck. The solicitation was posted on October 14, 2026, with a response deadline of November 3, 2026, at 2:00 PM MST. Submissions must be processed through the eMACS portal and include a completed business information document, detailed manufacturer descriptive literature to establish quality and compliance with specifications, and a bid price for the vehicle. The award will be based on the lowest responsive and responsible bid. Key administrative requirements include registration with the Secretary of State, acceptance of debarment information, and a mandatory certification of nondiscrimination against firearm entities or trade associations in compliance with 30-20-301, MCA. Payment terms are set as Net 30. The primary point of contact for this procurement is Rhonda Peters.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

Janitorial Supplies VendorThis subcontract agreement establishes a partnership for the provision of commercial-grade cleaning chemicals, paper products, and sanitation consumables to support prime contractors working on State of Montana Department of Public Health and Human Services facility projects. The scope of work includes the delivery of essential items such as disinfectants, cleaning agents, trash liners, toilet tissue, and paper towels specifically for the Lewistown facility. The vendor is required to maintain strict compliance with safety data sheets for all chemical supplies provided under the contract. This opportunity is categorized under NAICS code 423450, with a response deadline set for October 30, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Janitorial Cleaning Services (Lewistown Facility)This subcontract involves providing comprehensive janitorial cleaning services for a State of Montana Department of Public Health and Human Services facility located at 312 Birch Street, Ste. #1 in Lewistown. The scope of work includes general cleaning, dusting, vacuuming, trash removal, and restroom sanitation for an office space totaling 5,744 square feet, utilizing standard commercial cleaning equipment and chemicals. The opportunity is categorized under NAICS code 561720 and is intended for providers working under prime contractors. Interested parties should note the response deadline of October 30, 2026, with the solicitation having been posted on October 13, 2026.

Janitorial Services

POSTED

DEADLINE

Lewistown Janitorial Services

Solicitation # DPHHS-RFI-2027-0711BP

The State of Montana Department of Public Health and Human Services, specifically the Human Community Services Division and Child and Family Services Division, has issued a Request for Information (RFI) under solicitation number DPHHS-RFI-2027-0711BP. The agency is seeking information regarding janitorial cleaning services for a 5,744 square foot facility located at 312 Birch Street, Ste. #1 in Lewistown, Montana. This solicitation, categorized under NAICS code 561720, was posted on October 13, 2026, with a response deadline of October 30, 2026, at 2:00 PM MDT. As this is an RFI rather than a formal bid for award, the state is requesting that interested vendors provide a statement of interest, a brief description of their past experience performing similar services, and a best estimated price range from lowest to highest. While a formal contract value is not yet established, the agency has specified payment terms of Net 30. The primary point of contact for this inquiry is Braydon Pierce.

Janitorial Services

POSTED

DEADLINE

Trimble RTK GPS Systems SupplierThis subcontract agreement outlines the procurement of five complete Trimble R980 RTK GPS systems and associated accessories for the Montana State University Department of Civil Engineering. The selected supplier is responsible for providing fully configured and operational hardware, managing all logistics, and coordinating shipping to MSU Bozeman. To ensure the authenticity of the equipment, the supplier must be an authorized Trimble provider. The solicitation was posted on October 9, 2026, with a response deadline of October 23, 2026, falling under NAICS code 423850.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS