Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of The Interior was posted on October 4, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

CNC Plasma Table w accessories

Awarded
140G0120Q0002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 13 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Transit Administration is soliciting bids for a firm fixed price contract to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts primarily located in Baltimore City. The scope of work includes full maintenance and repairs to ensure equipment operates at original contract speeds and remains in safe, first-class condition. Key deliverables include a minimum of four on-site team hours per escalator monthly for preventative maintenance, semi-annual and annual deep cleaning of units, and strict adherence to ASME A17.1 and A17.2 safety codes. The contract features a five-year base period with no options and requires the contractor to provide certified mechanics, maintain emergency service capabilities, and adhere to Maryland Living Wage requirements. Award will be made by lot to the responsible bidder offering the most favorable price. The solicitation establishes a 17 percent Minority Business Enterprise (MBE) participation goal and a 1 percent Veteran-Owned Small Business Enterprise (VSBE) goal. Required submissions include a Project Execution Plan, performance bonds, and various certifications regarding conflict of interest and non-disclosure. Invoicing is handled via email to the Contract Monitor and Accounts Payable, with a specific allowance of 600,000 dollars provided for parts, materials, and sub-work. All work must comply with federal, state, and local laws, including ADA requirements for intercom systems and strict regulations regarding the handling and disposal of PCBs.
Maryland Transit Administration

POSTED

about 15 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
26WS0011-Floor Care Equipment Preventative Maintenance and Repair Services
Solicitation # 26WS0011
Solicitation 26WS0011 is issued by the California Department of Veterans Affairs (CalVet) for a contractor to provide comprehensive preventative maintenance, inspection, repair, and operational support for commercial floor care equipment in Los Angeles, California. The scope of work covers a fleet of carpet extractors, auto scrubbers, floor machines, and specialty vacuums. The contractor is responsible for providing all necessary labor, materials, and transportation, though consumable supplies like chemicals and batteries are excluded unless specifically authorized. Key performance standards include a two-hour onsite response for emergencies, a one-business-day response for non-emergencies, and a 100% completion rate for scheduled preventative maintenance. The contract will be awarded to the lowest responsible bidder, with a five percent preference given to certified Small or Micro businesses and a priority award to Disabled Veteran Business Enterprises (DVBE) in the event of a tie. Bidders must submit their proposals via email by November 16, 2026, including a completed Rate Sheet, Bidder Certification form, and a valid California business license. The contractor must maintain a Commercial General Liability insurance policy of at least $1,000,000 per occurrence and employ qualified technicians. Payment is processed through monthly invoices submitted to the CalVet Contract Manager, with a $10,000 withholding from the final payment for prime contractors until DVBE subcontracting reports are certified.
California Department of Veterans Affairs

POSTED

about 15 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

The U.S. Geological Survey Reston Acquisition Branch is seeking quotes for a CNC plasma table with accessories to be delivered to West Sacramento, California. The equipment must be delivered within 120 days of the purchase order date. This acquisition is designated as a total small business set-aside under NAICS code 811310, with a size standard of 8 million dollars. Request for Quote 140G0120Q0002 was issued on October 4, 2019, with a submission deadline of October 16, 2019, and an anticipated award date of November 6, 2019. Interested vendors must be registered in the System for Award Management to be eligible for the award. Quotes may be submitted via email to the designated agency contact.

General Info

Contract Value

$23,680

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

VA, USA

Set-Aside

SBA

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Ofc Of Acqusition Grants-National
ContactsNo contacts available
OfficeRESTON, VA, 20192, USA
Office AddressRESTON, VA, 20192, USA
ContactsNo contact information available

Full Description

Show more
The U.S. Geological Survey Reston Acquisition Branch has a requirement for (1)CNC PLASM TABLE WITH ACCESSORES to be delivered to, W. Sacremento, CA within 120 days of the date the Contractor receives the purchase order. There are no options. Request for Quote (RFQ) 140G0120Q0002 will be issued on 10/04/2019 with written quotes due on 10/16/2019. This acquisition is a total small business set-aside. The NAICS code is 811310. The size standard is $8m. The anticipated award date of the contract is November 6, 2019. A vendor must be registered at https://www.sam.gov/index.html to be awarded the contract. All responsible sources may submit a bid or quotation which shall be considered by the agency. Responses may be submitted via Email to contact@example.gov The RFQ may be viewed on FedConnect at https://www.fedconnect.net/FedConnect/.

More opportunities from Department Of The Interior → Ofc Of Acqusition Grants-National

Same awarding agency

NAICS: 238220
Federal
Z--EROS Removal and replacement of chilled and conden
Solicitation # 140G0126Q0288
Request for Quote 140G0126Q0288 is a total small business set-aside issued by the Department of the Interior, USGS/EROS Science Center in Sioux Falls, South Dakota. The project requires a professional firm to remove and replace chilled water, condenser water, and heating water piping serving the 1996 building addition. Key technical requirements include installing a new condenser water network with pumps and VFDs, sizing the chilled water system to support two 1996 York chillers at a maximum capacity of approximately 600 tons, and replacing pneumatic controls in the penthouse with multi-position electric actuators. The contractor must execute the work in phases to ensure that facility offices and computer rooms remain fully operational, and weekend work is prohibited. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) process, evaluating firm-fixed-price offers for technical acceptability and past performance. The period of performance is scheduled from November 4, 2026, to July 31, 2027, with work expected to be completed within 180 calendar days of award. Compliance with the Davis-Bacon Act for wage determinations and the Buy American Requirement for construction materials is mandatory. Required submissions include a technical approach for phased construction, a completed SF 1442, a detailed bid schedule, and a bid guarantee via SF 24. Final payment is contingent upon the submission of a Release of Claims via Form DI-137.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

14 days ago

DEADLINE

in 6 days
View Details
NAICS: 541990
Federal
D--Intent to Award
Solicitation # 140G0126Q0188
The U.S. Geological Survey intends to award a sole source purchase order to EarthScope Consortium, Inc. for the long-term archiving, curation, and dissemination of continuous Global Navigation Satellite System data generated by USGS-supported monitoring stations, with a period of performance spanning from August 1, 2026, through June 30, 2031, including four one-year option periods. This action is justified under FAR 13.106-1(b)(1) due to EarthScope Consortium’s unique status as the sole nationally recognized, USGS-approved repository for GNSS data that meets the agency’s Fundamental Science Practices requirements for trusted, discipline-appropriate data management. EarthScope operates the GAGE geophysical data facilities, which already provide scalable, production-level infrastructure, standardized workflows, and metadata frameworks used by USGS and other federal and academic partners, eliminating the need for redundant or incompatible systems. The decision follows comprehensive market research that confirmed no other entity can provide equivalent services without prohibitive cost, delay, or fragmentation of data standards. The requirement includes routine annual archiving for active stations and a single ingestion of historical data from a legacy station, with all services delivered through an existing, certified cyberinfrastructure that ensures data integrity and broad accessibility. EarthScope’s established role as the primary national hub for GNSS data, its deep integration with USGS science operations, and its proven compliance with federal data governance policies make it the only viable source for this critical function. The contracting office has determined that competition would be impractical due to the specialized technical, scientific, and infrastructure requirements, and future competitions would only be considered if new repositories are formally recognized as meeting USGS FSP standards or if the agency develops an internally managed archive of equivalent capability. Questions regarding this intent to award must be submitted to the Contract Specialist by June 29, 2026, and the action will proceed under simplified acquisition procedures without soliciting competitive bids.
All Other Professional, Scientific, and Technical Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS