Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Homeland Security was posted on May 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Coating and Preservation Work with Independent NACE Inspection

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation area, and Vocational building. The selected contractor must conduct a site survey to verify door dimensions and fire ratings, supply Grade I heavy-duty panic bars with matching exterior trim and closers, and perform at least ten consecutive cycle tests to ensure fail-safe operation. All work must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and Americans with Disabilities Act standards. This is a fee-for-service subcontracting opportunity set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders are required to submit a lump sum price for the entire project along with individual pricing per deficiency by December 1, 2026. Required submission documents include a completed bid sheet, a supplier self-certification packet with a W-9, three references for similar projects, and an SBA certification letter if applicable. Awardees must provide proof of insurance and comply with federal regulations, including the Davis-Bacon Act prevailing wage rates for Canyon and Gem Counties, as well as various FAR clauses regarding security, whistleblower rights, and the prohibition of certain foreign purchases.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
Federal
Z--ID- KOOSKIA NFH-OVERHEAD DOOR REPLACE
Solicitation # 140FF027Q0033
The U.S. Fish and Wildlife Service is conducting market research via a Sources Sought Synopsis for the replacement of three roll-up garage doors at the Kooskia National Fish Hatchery in Kooskia, Idaho. The project involves the demolition and disposal of existing doors and the installation of three new sectional overhead doors, including one approximately 8' 4" x 8' 7" and two approximately 10' 2" x 10' 1". Additionally, the scope requires the installation of two 120vac electric door operators and general preventative maintenance for up to ten additional roll-up garage doors. The resulting contract is intended to be a Firm-Fixed-Price award with a performance period of 60 days, specifically scheduled from November 30, 2026, through December 30, 2026. This opportunity is designated as a total Small Business Set Aside under NAICS code 238290. Interested firms must submit a response by November 6, 2026, providing their CAGE code, UEI, and evidence of capability through up to three similar projects completed within the last five years. A mandatory site visit is required for all bidders to verify measurements and existing conditions. Final acceptance of the work will be based on compliance with the Statement of Work, verified functionality of the doors and electric operators, and complete site cleanup. All responses should be submitted electronically to the Contracting Officer, Cindy Salazar.
Fws Contracting Activity

POSTED

about 21 hours ago

DEADLINE

in 10 days
NAICS: 238290
New
Federal
Z--OR-FWS SHELDON NWR-INSTALL WOOD STOVE
Solicitation # 140FF027Q0043
The U.S. Fish and Wildlife Service is conducting market research through a Sources Sought Synopsis for the installation of a mobile home compliant wood-burning stove system at the Sheldon National Wildlife Refuge in Denio, Nevada. The project requires a contractor to provide all labor, materials, supervision, and equipment necessary to install a government-furnished Jotul F035 stove, along with a complete chimney system, hearth pad, wall protection, and required smoke and carbon monoxide detectors. The resulting contract will be a Firm-Fixed-Price agreement with a period of performance spanning 120 days from the Notice to Proceed. Interested firms must be registered in SAM.gov and provide their CAGE code, UEI, and business size based on NAICS code 238290. Qualified contractors must demonstrate prior experience by providing up to three relevant projects completed within the last five years and must be licensed and compliant with OSHA requirements. All work must adhere to NFPA 211, the International Residential Code, the International Building Code, and ADA Accessibility Guidelines. Final acceptance is contingent upon successful operational testing, verification that the roof is weather-tight, and the submission of all warranties and closeout documents. Responses to this synopsis must be submitted electronically to Contracting Officer Cindy Salazar by November 6, 2026.
Fws Contracting Activity

POSTED

about 21 hours ago

DEADLINE

in 10 days
NAICS: 238290
New
Federal
Z--OR-FWS SHELDON NWR-RE-KEY HQ
Solicitation # 140FF027Q0036
The U.S. Fish and Wildlife Service is conducting market research through a sources sought synopsis for a firm-fixed-price contract to replace and modify interior and exterior door hardware at the Sheldon National Wildlife Refuge in Denio, Nevada. The primary objective is to convert the facility to a Best Lock interchangeable core system to ensure compatibility with other refuge facilities. The scope of work includes providing all labor, materials, and equipment necessary for installation, as well as performing field verification of door types and frame configurations. All work must adhere to the International Building Code, ADA Accessibility Guidelines, ANSI/BHMA standards, and OSHA safety regulations. Interested firms must be registered in SAM.gov under NAICS code 238290 and submit their capabilities statement by November 6, 2026. Responses are limited to five pages and must include a maximum of three relevant projects completed within the last five years, along with detailed contract data and socioeconomic status. The government is using this process to determine if the requirement can be set aside for small businesses or other socioeconomic programs such as HUBZone or EDWOSB. While the period of performance is listed inconsistently as either 60 or 120 days from the notice to proceed, final acceptance will be based on successful inspections, operational testing, and the submission of warranties and closeout documents.
Fws Contracting Activity

POSTED

about 21 hours ago

DEADLINE

in 10 days

AI Contract Overview

Show more

This contract involves performing surface preparation and applying marine-grade coatings on the hull and superstructure of vessels. A key requirement is the inclusion of an independent NACE Level 3 inspection to ensure the quality of the coating application. The work falls under NAICS code 238290, which pertains to drywall and insulation contractors, indicating specialized coating and preservation tasks within marine maintenance. Issued by the Department of Homeland Security through the Sflc Procurement Branch 2(00085), the subcontract solicitation was posted on May 15, 2026, with responses due by June 12, 2026, at 3:00 PM. While exact location details for the office and performance site are not specified, the contract emphasizes strict adherence to industry standards and quality assurance protocols through independent inspection, reflecting the critical nature of preserving maritime assets in compliance with federal requirements.

General Info

Marine hull coating contract with NACE Level 3 inspection, due June 12, 2026, by DHS.

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

CA

Set-Aside

NONE

Documents

This scope was carved out of USCGC-ALDER-DRYDOCK-REPAIRS.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC ALDER WLB 216

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform surface preparation and application of marine-grade coatings on hull and superstructure, with independent NACE Level 3 inspection required.

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 811210
Federal
TRS-3D /AN/SPS-75 Radar repairs/ overhaul services
Solicitation # 70Z08526RRJ001B00
The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

in about 1 month
View Details
NAICS: 333995
Federal
APPLETON CYLINDER
Solicitation # 70Z08526Q40200B00
Solicitation 70Z08526Q40200B00 is a combined synopsis and request for quote issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of specific brand name components from Appleton Marine Inc. This is a Brand Name Only solicitation with no substitutions authorized; therefore, interested vendors must be authorized distributors and provide an authorized distributor letter from the Original Equipment Manufacturer with their quotation. The requirement is a total small business set-aside under NAICS code 333995 and will result in a firm-fixed-price purchase order. The procurement consists of three line items: three Jib Cylinders (NSN 3040 01-F12-2745), four Luff Cylinders (NSN 3040 01-F12-2743), and ten Sheaves (NSN 3020 01-F12-2750). Strict packaging and marking standards apply, including MIL-STD-2073-1E Method 10 for cylinders and ASTM D5118 fiberboard boxes for sheaves, with all items requiring marking per MIL-STD-129R and barcoding per ISO/IEC-16388-2007. Delivery is required by September 30, 2026, to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with shipping terms set as FOB Destination. Offers will be evaluated based on price and the ability to meet the brand name and authorized distributor requirements. Successful contractors must submit invoices through the Invoice Processing Platform with payment terms of Net 30. All submissions must include the vendor's Unique Entity Identifier and CAGE code, and offerors must maintain current representations and certifications in the System for Award Management.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 months ago

DEADLINE

in 9 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS