Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Coating Application Services (CARC & High-Temp)

Active

Federal

Response Deadline08/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of Chemical Agent Resistant Coating and high-temperature coatings to angle brackets specified in DCSC Drawing 16236 CS-2300-0001, with all work mandated to meet rigorous military performance standards. This service is critical for ensuring durability, corrosion resistance, and operational readiness under extreme environmental and combat conditions. The coatings must be applied precisely to the designated components to maintain structural integrity and compliance with defense specifications. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, identified under NAICS code 332813, reflecting a deliberate effort to support veteran-owned enterprises in the defense supply chain. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. The place of performance and point of contact details are not specified, but the work is expected to be performed in alignment with federal defense procurement protocols. Interested parties must submit their proposals via the provided DIBBS portal before the deadline.

General Info

Service-disabled veteran-owned small business subcontract for military-grade coating application on angle brackets per DCSC Drawing 16236.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

US

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Application of Chemical Agent Resistant Coating (CARC) and high-temperature coatings to angle brackets per DCSC Drawing 16236 CS-2300-0001, meeting military performance standards.

Similar Contracts

Same NAICS industry code

Precision Metal Tube ManufacturingThe contract involves the manufacture of a specialized metallic tube identified by NSN 4710014772810, engineered to fully comply with technical and quality standards established by the Defense Logistics Agency. This product must meet precise material composition, dimensional tolerances, and performance criteria mandated for government use, ensuring reliability under operational demands. The work is classified as a subcontract under NAICS code 332813, indicating focus on forgings and stampings, with all production requirements tied directly to DLA specifications. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 14, 2026, and the place of performance is designated as Conneaut Lake, Pennsylvania, with ZIP code 16316-6661. Although no point of contact is listed, bids must align with the federal procurement framework governed by the Department of Defense, specifically under the Maritime Supply Chain ESOc Buys organization. The contract is structured as a subcontract opportunity, accessible through the DIBBS system, and participation requires strict adherence to all technical, quality, and delivery provisions outlined by the government.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Specialized Metal Coating or Surface Treatment

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Heat Treating and Material ProcessingThis contract pertains to the application of advanced heat treating and material processing techniques including carburizing, nitriding, and hot isostatic pressing to improve the mechanical properties of components used in aerospace applications. The work is intended to enhance material strength, durability, and performance under extreme operational conditions typical in aviation and defense systems. The solicitation is categorized as a subcontract and falls under NAICS code 332813, specifically targeting industrial heat treating services aligned with defense manufacturing requirements. The opportunity was posted on August 3, 2026, with a strict response deadline of August 11, 2026, at 4:59 AM, indicating a compressed timeline for qualified vendors to submit proposals. The contracting activity is managed by the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, with the place of performance not specified beyond the agency’s jurisdiction. All work must meet stringent aerospace standards as dictated by defense procurement protocols.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Final Vehicle Integration, Painting, and FinishingThe contract involves the final assembly of a tanker body onto a chassis, with comprehensive surface preparation and finishing of all steel components to ensure a consistent, uniform white finish that matches the color of the vehicle cab. This process includes sandblasting to remove rust and contaminants, followed by priming and painting to achieve a durable, high-quality exterior appearance suitable for operational and aesthetic requirements. All work must be completed to exacting standards to ensure visual and functional compatibility with the existing vehicle design. The contract is classified as a subcontract under NAICS code 332813, with a response deadline of August 19, 2026, at 10:30 AM, and was posted on August 3, 2026. Performance is required in Dhaka, Bangladesh, with a zip code of 1212, under the authority of the U.S. Embassy Dhaka, specifically the Department of State. The work is critical to the completion of a specialized vehicle, and adherence to the specified color match and surface finish is essential for uniformity and compliance with technical specifications.

US Embassy Dhaka

POSTED

DEADLINE

Process/Operations Sheet DevelopmentThe contract titled ProcessOperations Sheet Development requires the creation of detailed process sheets for manufacturing special processes including heat treating, welding, and coating. These sheets must clearly outline each manufacturing step, controlled parameters, and required validations to ensure consistency, quality, and regulatory compliance. The work is intended to support defense manufacturing standards and must be executed with precision to meet operational and safety requirements. The contracting entity is DLA Aviation under the Department of Defense with performance required in Richmond, Virginia, at the zip code 23237. The solicitation is classified as a subcontract and was posted on August 3, 2026, with a firm deadline for responses on August 7, 2026, at 7:00 PM. The North American Industry Classification System code 332813 corresponds to Metal Treating, indicating the technical focus on surface and thermal processing. Although specific point of contact or set aside details are not provided, the requirement emphasizes documented control systems critical to defense supply chain integrity. Proposals must demonstrate capability in developing rigorous, inspection-ready process documentation aligned with aerospace and defense industry norms.

POSTED

DEADLINE

Industrial Painting and Labeling ServicesThe contract requires the application of durable industrial safety yellow paint and permanent black capacity labels to fabricated steel sawhorses intended for military use, ensuring compliance with safety and identification standards. The work involves precision surface preparation, coating application, and secure attachment of labeling to meet military specifications for durability and visibility in operational environments. This is a Small Business Set Aside subcontract under NAICS code 332813, managed by DLA Maritime - Pearl Harbor under the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 6, 2026, at 10:00 PM, indicating a tight turnaround for qualified small businesses to submit proposals. Performance location details are not specified, but the work supports a federal defense requirement with no public point of contact listed.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

Logo Medallion Production (Metal Stamping/Engraving)The contract pertains to the manufacture of branded logo medallions using metal stamping, die-cutting, plating, and finishing techniques, under the NAICS code 332813, which classifies it as a metal stamping and forging operation. The work is being procured as a subcontract by Lansing, Michigan, with a response deadline of August 5, 2026, at 7:00 PM ET and posted on August 3, 2026. The production must meet precise specifications for design fidelity, material integrity, and surface quality to ensure consistent branding applications. All phases, from initial stamping through final plating and finishing, require strict quality control to maintain dimensional accuracy, durability, and aesthetic uniformity across all units. The place of performance and point of contact details are not specified, but the work is tied to an entity within Michigan. The solicitation does not indicate a set-aside designation, suggesting it is open to all eligible subcontractors regardless of business size or category. Interested parties must submit proposals before the deadline through the provided Michigan state procurement portal. Compliance with technical requirements for metal fabrication standards and finish treatments will be essential for award consideration, and successful bidders will be expected to deliver fully functional, branded medallions that align with the client's design and quality expectations.

POSTED

DEADLINE

in about 18 hours

Precision Tube Component Manufacturing and SupplyThe contract calls for the manufacture or supply of a precision outlet tube designated by NSN 4730016795463 and Part Number 087382, requiring strict adherence to military specifications covering material composition, preservation methods, and packaging standards to ensure operational reliability and durability under demanding conditions. The component is intended for use in military vehicle support systems, and all delivered units must meet or exceed the established technical requirements for performance, quality, and traceability. This is a subcontract opportunity under the NAICS code 332813, posted by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT office, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation opened on August 2, 2026, and responses are due by August 13, 2026. While no set-aside designation or point of contact is specified, interested parties must comply fully with all military-grade manufacturing and documentation protocols as outlined in the referenced technical standards, and submissions must be made through the official DIBBS platform.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Metal Stamping and Machining for Terminal LugsThe contract calls for the manufacture of military-grade terminal lugs using precision metal stamping, forming, and machining processes on conductive metals to meet exacting electrical and dimensional specifications required for defense applications. The work must adhere to rigorous quality and performance standards to ensure reliability in high-stress military environments, with all components produced to precise technical requirements without deviation. The manufacturing process involves advanced capabilities in material handling, tolerancing, and surface finishes to guarantee consistent conductivity, mechanical integrity, and long-term durability under operational conditions. The contract is classified as a subcontract under NAICS code 332813, with a response deadline of August 10, 2026, and was posted on August 2, 2026. Performance is required at the facility with a place of performance in New Cumberland, Pennsylvania, 17070-5002. The solicitation is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense and is accessible via the DIBBS platform. There is no set-aside designation specified, indicating the opportunity is open to all eligible subcontractors without restriction based on business size or ownership type.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Coating or Corrosion Protection ApplicationThe contract is for the application of specialized protective coatings, including powder coating or galvanizing, to enhance durability and provide corrosion resistance for equipment and components operating in harsh environments. It is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the North American Industry Classification System code 332813 identifies the work as related to metal coating and related services. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. The place of performance and specific location details are not specified, indicating the work may occur across multiple sites at the agency’s discretion. Interested parties must submit proposals through the DIBBS portal prior to the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

Precision Aircraft Rib and Stiffener ManufacturingThe contract requires the manufacture and delivery of five precision aircraft ribs and stiffeners, identified by part number 25-8864-512 and national stock number 1560016463849, in strict compliance with engineering drawing EI-016463849 and all applicable Defense Logistics Agency technical specifications. Production must adhere to defined dimensional tolerances, undergo origin inspection to verify material authenticity and sourcing, and handle export-controlled technical data in accordance with federal regulations. The work is to be performed at Tinker Air Force Base, Oklahoma, with a deadline for response set for August 10, 2026, and the solicitation was posted on August 2, 2026. This is a subcontract opportunity under NAICS code 332813, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Architectural Metal Coating and Finishing ServicesThe contract calls for the application of organic coatings, specifically COLOR 101 CEDARTONE, to metal components in accordance with Section 09 61 19, covering staining and corrosion protection processes to ensure long-term durability and aesthetic consistency. The work must adhere to strict technical specifications for surface preparation, coating application, and finish quality, with an emphasis on environmental resistance and compliance with architectural standards for outdoor metal elements. The opportunity is issued as a subcontract under the California Department of Parks & Recreation, with a posted date of July 31, 2026, and a response deadline of September 2, 2026. The North American Industry Classification System code 332813 identifies the work within architectural metal coating and finishing services. Performance is expected to occur in Contra Costa County, and while no set-aside details are specified, bidders must be prepared to meet all technical, scheduling, and quality requirements tied to state-funded park infrastructure projects.

California Department of Parks & Recreation

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

FILTER ELEMENT, INTA

Solicitation # SPE7LX-26-U-9232

The contract is for the procurement of a filter element, intake, identified by NSN 2940-01-566-5009 and part number 87682999, with a quantity of 551 units, each priced at $551.00 for a total value of $303,601.00. The delivery is FOB origin with a 74-day lead time, and the quantity has zero variance tolerance—no overages or underages are permitted. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization adhering strictly to DLA Packaging Requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, including ASTM D3951. The item is classified under a total small business set-aside with NAICS code 333618, and the solicitation is issued under SPE7LX-26-U-9232, with a response deadline of August 19, 2026. The contract emphasizes that the listed quantity is an estimate and may not be fully purchased by the IDC. All documentation and requirements referenced through R and I numbers are incorporated by reference from the DLA Master List, accessible via the official DLA website. The primary point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.

Other Engine Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9225

This contract is for the procurement of 591 units of a V-belt, cogged or notched, identified by NSN 3030-00-294-9785 and part number AX56, sourced from approved suppliers including Gates Corporation, Dayco Products Inc, and Contitech USA Inc. The item is covered under DLA Direct, CONUS, with a total price of $591.00 at $1.00 per unit, and delivery is required within 70 days FOB origin. The quantity is fixed with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements RP001. All technical and quality requirements referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements supersede any other standards. The solicitation is a total small business set-aside under NAICS code 326220, issued under contract number SPE7LX-26-U-9225, with a response deadline of August 19, 2026, and a posted date of August 4, 2026. The primary point of contact is Theodore Misiolek of the Strategic Acquisition Program Directorate, Department of Defense.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 8 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7LX-26-U-9223

This contract is for the procurement of 724 fluid filter elements with NSN 4330015342361 and part number 19431541 under solicitation SPE7LX-26-U-9223, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement is a total small business set-aside under NAICS code 333998, with delivery due within 78 days from the award date and FOB origin terms. The entire quantity must be delivered in exact accordance with the specified 724 units, as zero variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers from the DLA Master List take precedence over any other standard. The unit of issue is each, and all packaging must be properly marked and labeled for government identification as per contractual directives. Inspection and acceptance occur at destination. The contract stipulates that government identification must be removed from any non-accepted supplies, and the supplier must adhere strictly to DLA’s packaging and handling protocols. The point of contact for inquiries is Theodore Misiolek, with contact information provided. This solicitation, posted on August 4, 2026, with a response deadline of August 19, 2026, is managed through the DIBBS platform, and the DLA’s authoritative technical and quality requirements—effective as of the solicitation or award date depending on acquisition size—govern all aspects of compliance. The estimated quantity noted does not guarantee purchase by the IDC, but the awarded contract requires exact fulfillment of 724 units with no adjustment allowed. All deliverables must be presented in accordance with the specified unit of issue and packaging data QUP:001, fully aligned with DLA’s procurement directives.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

INNER TUBE, PNEUMATIC T

Solicitation # SPE7LX-26-U-9224

This contract specifies the procurement of 2,543 pneumatic vehicle inner tubes with the size designation 06.90/6.00-9 and TR135 valve, configured as off-center. Each tube must be partially inflated and folded to minimize sharp creases and treated with powdered soapstone, talc, or an approved substitute to prevent rubber-to-rubber adhesion. The valve stem must be protected from damage by non-corrosive material. The item is classified as a commercial item and falls under the Defense Logistics Agency’s packaging and technical requirements, including compliance with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking. Shelf life is strictly 60 months and non-extendable, with special marking code 32 indicating Type I shelf-life status. Mercury and mercury-containing compounds are prohibited in the product, packaging, preservation, or marking except for approved functional uses like specific batteries or instruments, with portable devices requiring shockproof construction and a secondary containment boundary. Ozone-depleting chemicals are entirely banned. The item is identified by NSN 2610-00-089-5997 and must conform to the technical standard ZZ-I-550 Revision F dated 10/21/1992. Delivery is FOB destination within 41 days with zero variance allowed on quantity. Inspection and acceptance occur at origin. The contract is a total small business set-aside under NAICS code 326211 and is managed by the Department of Defense’s Strategic Acquisition Program Directorate with Theodore Misiolek as the primary point of contact.

Tire Manufacturing (except Retreading)

POSTED

about 8 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7LX-26-U-9230

This contract requires the supply of a fluid filter element with a minimum filtration rating of 20 microns, designated by NSN 2910-01-502-6539 and part number FS1251 from Cummins Filtration Inc, under solicitation SPE7LX-26-U-9230. A total of 4,870 units must be delivered within 71 days FOB origin, with no variance permitted in quantity. The item is classified as a critical application and restricted source, mandating government engineering source approval prior to procurement. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date for simplified acquisitions. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129. The use of Class I ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for specific functional components such as certain batteries, instruments, or controls, with additional containment requirements for portable mercury devices. Configuration changes require formal engineering change proposals or variance requests, and covered defense information provisions apply. The contract is a total small business set-aside under NAICS code 336390, with Theodore Misiolek as the primary point of contact.

Other Motor Vehicle Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

GAGE, TIRE PRESSURE,

Solicitation # SPE7LX-26-U-9226

This contract specifies the procurement of tire pressure gages meeting strict technical and packaging requirements under the Department of Defense’s DLA system. The gages must have an inflation range of 10 to 160 PSIG, feature a dual-chuck design with a long extension and external indicating capability, and adhere to the Commercial Item Description for self-contained and inflator gages for pneumatic tires. The indicator bar must be at least .250 inches square with calibrated graduations on all four sides: inch-pound markings in 2 PSI increments every 10 PSI from 10 to 160 PSIG in black, and metric markings in 20 KPa increments every 100 KPa from 80 to 1100 KPa in red, ensuring readability when held with the dual chuck upward. The gages must be constructed of corrosion-resistant materials such as stainless steel or brass, and are designated as a critical application item. All components must comply with DLA Master List technical requirements referenced by R and I numbers, and sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, even when using MIL-STD-105/ASQ Z1.4 for lot size determination. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the gages or their contact surfaces, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, wrapping, and storage codes, and marking must follow MIL-STD-129 without special markings. The product is identified by NSN 4910-00-204-3170 and part number AA59568-002-B-3, with a required delivery in 116 days FOB origin, a quantity of 1,187 units, and zero variance allowed. Procurement is under a Service-Disabled Veteran-Owned Small Business Set-Aside, with inspection and acceptance occurring at destination, and all preservation, packaging, and marking activities strictly exclude mercury or mercury compounds.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

CYLINDER ASSEMBLY, ACTU

Solicitation # SPE7LX-26-U-9235

The contract is for the procurement of 60 units of a linear actuating cylinder assembly identified by NSN 3040-01-572-7391 under solicitation SPE7LX-26-U-9235, issued by the Defense Logistics Agency’s Strategic Acquisitions Program Directorate. The requirement is a total small business set-aside under NAICS code 333613, with a 598-day delivery timeline and a response deadline of August 19, 2026. The item is subject to stringent technical and quality controls, including mandatory compliance with DLA’s Master List of Technical and Quality Requirements, export control regulations under ITAR or EAR, and restrictions on the use of ozone-depleting chemicals. Technical data associated with this item is classified as export-controlled and may only be accessed by contractors with approved U.S./Canada Joint Certification Program credentials, completion of DLA-specific training, and formal authorization. Configuration changes require formal engineering change proposals, and components must be sourced from qualified products or manufacturers listed per procurement note H02. Additionally, all supplies must adhere to DLA packaging standards, and government identification must be removed from non-accepted items. Cybersecurity requirements include CMMC Level 2 certification for any third-party assessors involved.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

FILTER ELEMENT, INTAKE

Solicitation # SPE7LX-26-U-9236

This contract specifies the procurement of a filter element for an intake air cleaner, designated by NSN 2940-00-934-7989, with a requirement for 2,564 units under solicitation SPE7LX-26-U-9236. The item is classified as a critical application component used on a 3 KW, 1800 RPM diesel generator unit and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates depending on acquisition size. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the equipment, except for specific exemptions such as batteries, fluorescent lights, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. A list of approved part numbers from multiple qualified suppliers including Baldwin Filters, Donaldson, Cummins Filtration, WIX, and others is provided, ensuring sourcing flexibility while maintaining technical compliance. Delivery is required FOB origin within 62 days of contract award, with no variance allowed in quantity — exactly 2,564 units must be furnished. Inspection and acceptance occur at the destination, and packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, including the use of Unit of Issue code 001, preservation method 10, and marking in accordance with MIL-STD-129, with no special marking codes applied. Palletization must follow RP001 specifications, and all units must be properly labeled and prepared for transport. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 336390, with Theodore Misiolek listed as the primary point of contact for inquiries. The contract does not guarantee purchase of the estimated quantity by the IDC, and all items must be furnished without government identification if rejected.

Other Motor Vehicle Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9227

This contract pertains to the procurement of a V-belt with NSN 3030-00-160-8285 and part number A27, supplied by CONTITECH USA, INC, under solicitation SPE7LX-26-U-9227. The requirement is for 1,052 units to be delivered FOB origin within 56 days, with no variance allowed in quantity. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 84 months, and at least 71 months of shelf life must remain upon delivery. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 indicating Type I shelf life, and palletization must meet DLA packaging standards. The contract explicitly prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in the product, preservation, packaging, or marking, with limited exceptions for functional mercury in specific applications such as batteries, fluorescent lights, and weapon systems, provided they meet additional containment requirements. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and for this simplified acquisition, the version in effect on the solicitation issue date applies. The contract is a Total Small Business Set-Aside under NAICS code 326220, with Theodore Misiolek designated as the primary point of contact for inquiries.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 8 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7LX-26-U-9234

This contract is for the procurement of fluid filter elements identified as a commercial off-the-shelf item with the NSN 2940-01-567-4003 and an estimated quantity of 724 units. The item is sourced from multiple commercial manufacturers including JCB Inc., Deere & Company, Hitachi Construction Machinery, Vanderfield Pty Ltd DBA, Baldwin Filters Inc., Hastings Filters Inc., and Wix Corp., all of which produce equivalent part numbers such as AT468647, BT9422, HF1019, and WL10186. The contract falls under DLA Direct, CONUS coverage and requires delivery within 62 days FOB origin with zero percent quantity variance permitted. Inspection and acceptance occur at the destination point. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA Packaging Requirements for Procurement, including palletization standards outlined in RP001. The unit of issue is each, with a unit price of $724.00 for a total price of $524,576.00. The solicitation, numbered SPE7LX-26-U-9234, was issued as a Women-Owned Small Business Set-Aside under NAICS code 336390, with responses due by August 19, 2026. Primary point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.

Other Motor Vehicle Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7LX-26-U-9222

This contract specifies the procurement of a helical compression spring identified by NSN 5360-00-936-2706 and part number 2572772, with a quantity of seven units to be delivered within 99 days FOB origin. The item is supplied by ONTIC ENGINEERING & MANUFACTURING, INC and is covered under DLA Direct, CONUS. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date oraward date depending on acquisition size. The spring is not subject to shelf life restrictions and does not require Item Unique Identification. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality defined in relevant documents. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required and palletization aligned with DLA packaging standards that prioritize reduction of plastic use without compromising protection. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The unit of issue is each, and the total price is based on a unit price of $7.00. The contract is issued under solicitation SPE7LX-26-U-9222 with a response deadline of August 19, 2026.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

CONTROL ASSEMBLY, TRANS

Solicitation # SPE7LX-26-U-9233

The contract pertains to the procurement of 317 units of a CONTROL ASSEMBLY, TRANSMISSION with NSN 2520-01-554-9359 under solicitation SPE7LX-26-U-9233, with a delivery requirement of 52 days ADO. The item is governed by source-controlled drawings, meaning only approved sources listed on the drawing are currently authorized, though additional qualified sources may exist and must be validated through the cognizant design activity. The contract incorporates stringent technical and quality requirements from the DLA Master List, and all supplies must strictly comply with the cited drawing specifications regardless of part number or supplier. Additional requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and configuration change management through engineering change proposals or variance requests. The item is subject to export control under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer of technical data to foreign persons, including employees or subsidiaries, and DFARS 252.225-7048 applies. Access to export-controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training, and DLA authorization. The solicitation mandates CMMC Level 2 certification for third-party assessors and incorporates covered defense information protocols. The contract is issued under NAICS code 336350 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and responses are due by August 19, 2026.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE