This Solicitation opportunity from Department Of Defense was posted on September 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

COATING, TAPE

Closed

SPE8ES-26-T-2797Federal

Submission Closed09/25/2026, 10:00:00 AM PDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

Marine Propulsion & Machinery (Engine Replacement)

Chatham Area Transit Authority

POSTED

DEADLINE

CAT FERRY VESSEL SUSIE KING TAYLOR RESTORATION

Solicitation # 2027-04

The Chatham Area Transit Authority (CAT) is soliciting bids for the restoration of the Ferry Vessel Susie King Taylor, with a submission deadline of January 22, 2027. The scope of work includes comprehensive interior renovations of the pilothouse and passenger accommodations, such as refinishing floors, updating wood trim, and installing a new electronics suite and security system. Exterior work involves replacing running lights with LED fixtures. Critical technical requirements include the submission of Installation Test Protocols and Qualitative Failure Analysis for USCG approval, a stability test supervised by Dejong & Lebet, Inc., and the reinstallation of lead ballast and flotation foam. All welding and materials must adhere to USCG and ABS Standards for Steel Construction. The contract is subject to strict federal and state regulations, including Buy America requirements under 49 U.S.C. 5323(j), which mandate that steel and manufactured products be produced in the United States. Contractors must comply with E-Verify requirements per O.C.G.A. §13-10-91(b)(1), as well as ADA and Section 504 accessibility standards. Award selection will be based on the highest ranked proposer as determined by a CAT Evaluation Committee. Applicants must provide proof of Commercial General/Professional Liability insurance and complete various certifications regarding debarment, lobbying, and Disadvantaged Business Enterprise (DBE) status. Proposals must be submitted as one unbound original, three copies, and one electronic copy to the procurement manager in Savannah, Georgia.

Chatham Area Transit Authority

POSTED

DEADLINE

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified Honda Marine Authorized Dealer to perform a complete propulsion repower and helm system integration on a 30-foot Munson Packman landing craft. The project consists of six phases: decommissioning and removing two existing Honda BF250A outboards and legacy iST components; installing two new Honda BF250D Drive-by-Wire outboards; integrating dual-station Honda iST electronic control heads; upgrading the fuel system with USCG Type A1-15 lines; installing new digital gauges and NMEA 2000 network integration; and conducting final commissioning and a minimum two-hour sea trial. The contractor is responsible for all procurement, installation, and digital rigging, and must provide a secure facility for vessel storage. Proposals are due by November 13, 2026, and will be evaluated based on a 100-point scale considering technical expertise, budget, and TERO compliance, with a preference for qualified Indian Offerors. Awardees must provide a performance bond for contracts exceeding 100,000 dollars or accept a 25 percent retainage, and maintain comprehensive insurance including general liability and worker's compensation. All work must be performed by technicians with at least five years of experience in commercial aluminum vessels. The contract is subject to tribal law and the jurisdiction of the Colville Tribal Court, with payments contingent upon the availability of funds within the tribal treasury's fiscal year.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

PANEL, VEHICULAR OPERAT

Solicitation # SPE7M4-27-T-1904

Solicitation SPE7M4-27-T-1904 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of one Vehicular Operation Panel, NSN 2090-01-657-7212. This HUBZone set-aside acquisition falls under NAICS 336611 and requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is June 9, 2028, with a delivery timeline of 161 days after order. The item must be produced according to TDP Rev A Gen 1 and comply with multiple Qualified Products Lists, including QPL-6363-5 and QPL-38999-99. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must meet SAE AS9003 or ISO 9001 standards. The contract imposes strict cybersecurity and export control requirements, including CMMC Level 2 certification and compliance with ITAR or EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and specific instruction SPI AK16577212. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. All quotes must be submitted via the DIBBS portal by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1892

Solicitation SPE7M4-27-T-1892, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for one debarkation ladder, identified by NSN 2090016543153. The government identifies acceptable part numbers from Mazzella Lifting Technologies, Inc. (P/N 16955977) and Coast Marine & Industrial Supply Inc (P/N 4500468837). The required delivery date is October 16, 2027, with a delivery schedule of 340 days after order. Shipping is FOB Destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. Quotations were required to be submitted via the DIBBS portal by November 9, 2026, and the government will not evaluate items produced via additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

WINDSHIELD WIPER ASSEM

Solicitation # SPE7M4-27-T-1887

Solicitation SPE7M4-27-T-1887, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for one windshield wiper assembly, NSN 2090-01-196-0072, part number KS-9180-G. The required delivery date is March 8, 2027, with a delivery timeline of 118 days after receipt of order. The item is to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with ASTM D3951 serving as the general packaging guideline. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure no mercury is intentionally added to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Marine Boat Modification and Motor Installation ServicesThis subcontract, titled Marine Boat Modification and Motor Installation Services, involves performing structural modifications and motor installation for prime contractors on U.S. Fish and Wildlife Service vessel projects. The scope of work specifically requires raising the transom height of a 1760 GameChanger vessel, installing a 65HP jet boat motor, and conducting comprehensive testing of the engine and controls to ensure the delivery of a fully operational vessel. All work must be completed in strict compliance with applicable U.S. Coast Guard regulations. Managed by the Department of the Interior under the Fws Contracting Activity, this opportunity is designated as a Total Small Business Set Aside under NAICS code 336611. The solicitation was posted on November 10, 2026, with a response deadline of November 25, 2026.

Fws Contracting Activity

POSTED

DEADLINE

Supply of Non-Driving Vehicular Axles (UT70BA)This subcontract, issued by the Department of Homeland Security for the US Coast Guard Surface Forces Logistics Center, requires the manufacture or procurement of 30 non-driving vehicular axles, specifically Part Number UT70BA. The selected provider must ensure all items are packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129R to prevent corrosion and damage during transit. The opportunity is designated as a total Small Business Set Aside under NAICS code 336611, with performance taking place in Curtis Bay. Interested parties must submit their responses by November 25, 2026, to support prime contractors in fulfilling these specific equipment requirements.

POSTED

DEADLINE

USCGC Legare Pelican Hooks & Detachable links

Solicitation # 52000QR270000165

The United States Coast Guard Surface Force Logistics Center is soliciting quotations for the procurement of pelican hooks and detachable links to backfill equipment for the CGC LEGARE as part of the 270 WMEC 270 SLEP Project. This is a total small business set-aside under NAICS 336611, to be awarded as a firm-fixed-price contract using simplified acquisition procedures. The requirement consists of two pelican hook assemblies (Part 7250012P7-12ABS) and two detachable links (Part 4670011ABS). All items must be Made in USA, feature a TT-V-51 Asphalt Black Varnish finish, and meet specific technical standards, including MIL-L-2710B for links and Drawing 804-860000 Rev. G for hooks, with ABS witness and proof load testing required. Deliveries must be made FOB Destination to the Coast Guard Yard in Curtis Bay, Maryland, no later than January 30, 2027. Interested vendors must be registered in SAM.gov and submit a detailed quotation on company letterhead including a cost breakdown, unit costs, and warranty information by November 5, 2026, at 12 P.M. Eastern Standard Time. Award will be based on the best value to the government, considering price, specifications, and quality, with the government reserving the right to award on an all-or-none basis.

POSTED

DEADLINE

Solicitation # 70ZU0327Q50472B00

POSTED

DEADLINE

USS OKANE (DDG-77); 7MRB0604 Standalone

Solicitation # N5523627R0007

The Southwest Regional Maintenance Center is soliciting proposals for the preservation, hull, mechanical, and electrical/electronic repairs of a 7-meter Willard Rigid Inflatable Boat (RIB), hull 7MRB0604, and its associated trailers for the USS OKANE (DDG-77). This effort is anticipated as a competitive Firm-Fixed Price supply contract, designated as a Total Small Business Set-Aside under NAICS code 336611. The period of performance is approximately 270 calendar days, scheduled from January 25, 2027, through October 22, 2027. Work must be performed at a contractor facility within a 50-mile radius of Naval Base San Diego, specifically at the Annex in National City, California. The scope of work encompasses all labor, supervision, and quality assurance required to return the craft to mission-ready status. Key technical requirements include repairs to the Cummins Model QSB 5.9Lm diesel engine and Mercury Bravo 2 Outdrive, a complete fuel system overhaul including tank replacement, and the installation of new steering components and navigation equipment. Preservation efforts require high-pressure washing, 95 percent surface abrasion using 320 grit sandpaper, and the application of two spray-finish coats of paint to achieve a like-new finish. The contractor is also responsible for procuring a new boat alteration placard and recording all existing markings and stenciling. Acceptance is contingent upon rigorous testing and inspection standards, including NAVSEA Standard Items and NSTM chapters. The contractor must conduct independent waterborne trials and a final two-hour customer trial to verify all systems. Critical milestones include 100 percent availability completion by October 1, 2027, and final craft delivery by October 22, 2027. Failure to meet these milestones may be considered a failure to perform under the contract terms. Interested offerors must be registered in SAM and PIEE to be eligible for award.

Southwest Regional Maintenance Center

POSTED

DEADLINE

Dry Ice Cleaning and Inspection of Forward Ventilation System onboard Virginia Class Submarine

Solicitation # N6278927Q0003

The Department of Defense, through the Supply Of Shipbuilding Groton office in Connecticut, is soliciting a combined contract under solicitation number N6278927Q0003 for the inspection and cleaning of sections of the forward ventilation system onboard a Virginia Class Submarine. This requirement falls under NAICS code 336611. The solicitation was posted on November 4, 2026, with a response deadline of November 13, 2026. Primary and secondary points of contact for this effort are Stephanie Neale and Andrea Cook. Special contract requirements include specific labor and pay mandates. A 4 percent hazard pay differential is applicable for employees in positions representing a low degree of hazard when working near ordnance, explosives, or incendiary materials. Contractors must provide required uniforms at no cost to employees or reimburse them for the actual cost. Additionally, in accordance with Executive Order 13706, employees subject to the Service Contract Act must receive one hour of paid sick leave for every three hours worked, capped at 56 hours per year. Labor classifications for employees not listed in the wage determination must be designated as either Classification A or B based on their responsibility for their own safety.

Supply Of Shipbuilding Groton

POSTED

about 15 hours ago

DEADLINE

in 3 days

AI Contract Overview

Solicitation SPE8ES-26-T-2797 is a request for quotations for the procurement of 36 gallons of coating tape, identified by NSN 8030-00-182-6460. This is a source controlled item that must be manufactured and tested according to cited limited rights data, meaning only vendors with access to the data or approved source traceability should quote. The item is subject to a non-extendable 12-month shelf life and must be stored at temperatures between 36°F and 74°F. Delivery is required by October 26, 2026, with a need ship date of October 15, 2026, delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-129 for marking and labeling, requiring lot or batch numbers on all packaging levels. Because the material is classified as hazardous, suppliers must comply with IP025 and 29 CFR 1910.1200, which includes the submission of Safety Data Sheets (SDS) and Hazard Communication Standard labels prior to award. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DIBBS system, and the contractor is required to use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports.

General Info

Procurement of 36 gallons of coating tape delivered to Tracy, California by 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

336611 - Ship Building and Repairing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 16

Solicitation

Deadline changedSep 22

Response deadline changed from Sep 22, 2026 to Sep 25, 2026.

Response DeadlineSep 25

Deadline has passed

Submission Closed

09/25/2026, 10:00:00 AM PDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressUSA

Contacts

Stephen Ockenhouse

contact@example.gov

Full Description

COATING,TAPE
COATING, TAPE
DWG 323965 REV B CAGE 80020 U/I = GL.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer
SPE8ES-26-T-2797
SECTION B
for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE MANUFACTURED AND TESTED IN ACCORDANCE WITH THE CITED LIMITED RIGHTS DATA. THE GOVERNMENT CANNOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACEABILITY TO THE APPROVED SOURCES SHOULD QUOTE. SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS CONSIDERING SOURCE APPROVAL.
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
ROYAL HOLDINGS, INC. 00333 P/N N700ABLACK STEVEN INDUSTRIES INC 33150 P/N N700ABLACK
TDP Rev A Gen 1 IAW BASIC DRAWING NR 80020 323965 REVISION NR B DTD 01/01/1939 PART PIECE NUMBER: 60210A
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8ES-26-T-2797
SECTION B
PR: 7018364443 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018364443 0001 GL 36.000
NSN/MATERIAL:8030001826460
DELIVERY (IN DAYS):0022
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PHYSICAL CHARACTERISTICS CODE ZZREFER TO 29 CFR 1910.1200 HCS SAFETY
DATA SHEET.
TOS CODE = Z
TEMPERATURE FOR STORAGE (TOS) CODE = 36°F TO 74°F
TEMPERATURE FOR SHIPPING = AMBIENT
ALL UNIT, INTERMEDIATE, TRANSPORT PACKAGES AND UNIT LOADS
SHALL BE CONSPICUOUSLY MARKED WITH STORAGE TEMPERATURE RANGE.
* MIL-STD-129 LABELING IS REQUIRED
MIL-STD-129 LABELS SHALL INCLUDE THE ADDITION OF LOT OR BATCH NUMBER.
EACH UNIT PACKAGE, INTERMEDIATE CONTAINER AND EXTERIOR CONTAINER
REQUIRES MIL-STD-129 LABELING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE8ES-26-T-2797
SECTION B
PR: 7018364443 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:10/15/2026 Original Required Delivery Date:10/26/2026
SPE8ES-26-T-2797 NSN/Part Number: 8030-00-182-6460 Quantity: 36 GL Purchase Request: 7018364443QTY: 36 Delivery: 22 days ADO