Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COIL, ELECTRICAL

Active
SPE7M1-26-T-248SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single electrical coil, identified by NSN 5950015436687 and part number 102867, with a requirement for delivery within 20 days FOB destination. The item is classified as a critical application and must be packaged and labeled in strict accordance with MIL-STD-129 and DLA’s Packaging Requirements for Procurement, prioritizing the DLA Master List of Technical and Quality Requirements over ASTM D3951 or Fed-Std-313. If the item is deemed hazardous, packaging must comply with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, subject to precedence by the DLA Master List. The unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Shipment must use the fastest traceable means, explicitly prohibiting parcel post, and must be addressed to USS NEW YORK LPD 21 at FPO AA 34092 with specific freight details including RDD 777, project code ZH9 TP 2, and vendor identification codes. The original required delivery date is August 4, 2026, and the contract is issued under solicitation SPE7M1-26-T-248S with a response deadline of August 17, 2026, managed by the Department of Defense’s Maritime Supply Chain under NAICS code 444180.

General Info

Single electrical coil, NSN 5950015436687, delivery FOB destination by August 4, 2026, per MIL-STD-129 and DLA Master List.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

444180 - Other Building Material DealersView NAICS

Place of Performance

UNIT 100333 BOX 1, FPO, AA, 34092, US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-248S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Ryan Snyder
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COIL,ELECTRICAL
COIL,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
INETWORK INC 1RM73 P/N 102867
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017719967 0001 EA 1.000
NSN/MATERIAL:5950015436687
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE7M1-26-T-248S
SECTION B
PR: 7017719967 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N3013A
USS NEW YORK LPD 21
UNIT 100333 BOX 1
FPO AA 34092
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N3013A
USS NEW YORK LPD21
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N3013A61961154
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE7M1-26-T-248S NSN/Part Number: 5950-01-543-6687 Quantity: 1 EA Purchase Request: 7017719967QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 444180
New
DIBBS
CHASSIS, ELECTRICAL-
Solicitation # SPE4A6-26-T-12EU
The contract pertains to the procurement of a chassis, electrical-electronic equipment identified by NSN 5975-01-626-6335 and part number CCHA42255-2, with a single unit required and a total price based on a unit cost of one dollar. Delivery is due within 171 days from the contract date, with shipment to be FOB origin, and the product must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and prohibited materials such as ozone-depleting substances and mercury compounds, which are forbidden in all manufacturing, cleaning, packaging, or preservation processes unless exempted as commercial items or part-numbered-only components. All packaging and palletization must adhere to DLA’s procurement requirements, and no government identification may be removed from rejected supplies. Contractors proposing substitutions or administrative part number changes must submit documentation from the approved manufacturer for prior engineering approval. The item is subject to the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date. The required delivery date is January 28, 2027, with a need ship date of January 31, 2027, under solicitation SPE4A6-26-T-12EU, issued by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-366W
The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
SWITCH BOX
Solicitation # SPE4A5-26-T-325Z
The SWITCH BOX, identified by NSN/Part Number 5930-01-630-1450 and quantity of 10 units, is subject to strict export control requirements under either ITAR or EAR, meaning any disclosure of its technical data to foreign persons—whether inside or outside the United States—requires prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign national employees and U.S. companies with foreign subsidiaries, and DFARS 252.225-7048 governs its handling. Access to this controlled data is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The item is solicited under contract number SPE4A5-26-T-325Z, with a response deadline of August 12, 2026, and a delivery requirement of 171 days after contract award. Performance is designated for Tinker AFB, Oklahoma, with primary point of contact Francis Polakiewicz reachable through the DLA. The NAICS code 444180 indicates this procurement falls within the appliance, electrical, and other equipment merchant wholesalers category, managed by the Department of Defense under the ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
SLED
NASPO ValuePoint RFP NVP_AS26-68 UT Walk-In Building Supplies
Solicitation # NVP_AS26-68
The NASPO ValuePoint Request for Proposal NVP_AS26-68 for Walk-In Building Supplies was issued by the State of Utah with a posted date of August 3, 2026, and a response deadline of September 10, 2026. The solicitation aims to establish Master Agreements with qualified suppliers to leverage the combined purchasing power of state and local government entities across the country, including departments, agencies, institutions of higher education, school districts, counties, cities, the District of Columbia, and U.S. territories, provided they comply with their local procurement regulations and receive approval from their chief procurement official. The goal is to secure best value pricing and terms that surpass what individual entities could achieve on their own through collective demand. Although the solicitation is administered under Utah’s procurement system, the designated contracting authority listed is the Comptroller of Public Accounts in Texas, with Sara Van Bergen serving as the primary point of contact. The RFP is accessible via Utah’s BonfireHub portal and the NASPO ValuePoint website, but official communications must be directed to Ann Schliep, Procurement Manager at the State of Utah. The contract will cover a broad range of walk-in building supplies and is structured to allow eligible public entities nationwide to access the resulting agreements, with all terms, pricing, and compliance requirements subject to change and verified through the official RFP portal.
Comptroller of Public Accounts

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 444180
New
DIBBS
PIN PLUG BASE KIT
Solicitation # SPE7M5-26-T-350A
The contract is for the procurement of a PIN PLUG BASE KIT with NSN 5935016296064 and part number 78535-100674, issued by the Department of Defense’s Active Devices Division under solicitation SPE7M5-26-T-350A. The total contract value is $565 for a single unit of one kilogram (KT), with delivery required within 20 days after order issuance to the freight shipping address in Brooklyn, New York. The item is classified as a Type 2 (Code 1) with a shelf life of three months, extendable, and must be preserved using the CLNG/DRY method per MIL-STD-2073-1E packaging standards. Packaging and marking must adhere strictly to MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must follow DLA’s RP001 guidelines. Transportation must be conducted by the fastest traceable means, explicitly prohibiting parcel post, and sea shipments must comply with U.S.-flag vessel requirements. The contract incorporates multiple FAR and DFARS clauses addressing procurement integrity, cybersecurity, hazardous materials, worker rights, and compliance with NIST SP 800-171 for safeguarding defense information, with several deviations applied to standard clauses to reflect updated policies. Inspection and acceptance occur at the delivery point, and all payments must be processed electronically through WAWF. Offerors must be registered in SAM.gov, provide correct UEI and CAGE codes, and affirm their small business status if applicable, while also certifying compliance with prohibitions on Chinese military-linked equipment and the use of hexavalent chromium. The solicitation requires electronic submission via DIBBS and imposes no page limits, but mandates adherence to all referenced standards and regulatory clauses without exception.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 444180
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M8-26-T-5690
The contract pertains to the procurement of a single SWITCH ASSEMBLY with NSN 5930-01-643-6049 and part number QMGRD0196-A1, issued under solicitation SPE7M8-26-T-5690 by the Department of Defense’s Electrical Devices Division. The item must be delivered in one unit within 20 days of contract award, FOB destination, with no tolerance for quantity variance, and is subject to inspection and acceptance at the delivery point. Packaging and preservation must strictly comply with MIL-STD-2073-1E, MIL-DTL-28786 for switches, and MIL-STD-129 for marking, with no special marking required. The supply is prohibited from containing Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly authorized. All packaging and palletization must adhere to DLA’s official packaging requirements, and the item must be shipped to the USS ABRAHAM LINCOLN CVN 72 at FPO AE 09520 under vessel shipment protocols. Transportation logistics follow specific DLAD procedural notes, and the contract requires use of the DLA unit of issue standard. The original required delivery date is July 22, 2026, and the solicitation response deadline is August 13, 2026. Covered defense information provisions may apply, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract.
ELECTRICAL DEVICES DIV

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 444180
New
SLED
AS26-68 Walk-In Building Supplies - NASPO ValuePoint RFP
Solicitation # AS26-68
The state of Utah, in partnership with the NASPO ValuePoint cooperative purchasing program, is re-soliciting proposals for the Walk-In Building Supplies portfolio, which is set to expire on July 31, 2027. This solicitation seeks to establish one or more master agreements that allow participating public entities—including states, cities, counties, and municipalities—to make convenient retail purchases of building supplies at discounted rates, with the discount applied at the point of sale. The contract will have a five-year term, during which vendors must guarantee their stated minimum discount percentage. While national coverage is preferred, vendors offering products in only one or a few states may still be considered for state-specific awards, provided they meet the technical evaluation threshold of 600 points as outlined in the evaluation plan. Multiple contract awards are anticipated based on this scoring system. Proposals must be submitted exclusively through the U3P Platform (Bonfire), with no acceptance of email or postal submissions. The solicitation number is AS26-68, and the response deadline is September 10, 2026. The primary point of contact for the solicitation is Ann Schliep of the Utah agency, reachable via email at aschliep@utah.gov. The contract will be administered through Utah’s procurement system but will be available to all eligible participants enrolled in the NASPO ValuePoint program across the country. Vendors are encouraged to respond even if their offerings are limited to specific jurisdictions, as the structure allows for regional participation alongside national coverage.
Utah

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 444180
New
DIBBS
CAPACITOR, FIXED, ELE
Solicitation # SPE7M5-26-T-359P
The contract specifies the procurement of a single fixed electrolytic capacitor with NSN 5910-01-629-7620, requiring delivery within 20 days of award. The item is subject to all DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. All supplies must comply with government marking and identification rules, including the removal of government identification from non-accepted items and proper physical identification of bare components. The alternate offeror must submit a complete data package covering both the primary and alternate part specifications. The solicitation is issued under contract number SPE7M5-26-T-359P, posted on July 30, 2026, with responses due by August 10, 2026, and falls under NAICS code 444180. Performance is directed to FPO 96607, with primary point of contact Matthew Stanko reachable via email and phone provided. The procurement is managed by the Department of Defense’s Active Devices Division under a federal procurement framework.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
SHIELD, ELECTRONIC C
Solicitation # SPE7M5-26-T-362T
The contract pertains to the procurement of a shield for electronic components, identified by part number 122163 and NSN 5999-01-628-3461, with a quantity of 13 units at a unit price of $13.00, totaling $169.00. Delivery is required within 156 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with DLA’s mandatory requirements, including MIL-STD-129 labeling and RP001 packaging standards, with hazardous materials subject to TQ requirement IP025 and non-hazardous items conforming to ASTM D3951 unless superseded by a higher-priority DLA technical or quality requirement. The contractor must not use any Class I ozone-depleting substances in manufacturing without explicit written approval from the contracting officer, and any substitution of the approved source requires formal documentation from the original manufacturer for prior approval. The item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 14, 2027. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, and any administrative or superseding part number changes must be formally approved prior to award. The solicitation number is SPE7M5-26-T-362T, issued by the Department of Defense’s Active Devices Division, with Margaret Smith designated as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-239C
This contract specifies the procurement of one circuit card assembly with part number 632920-00 and NSN 5998-01-633-4023, issued by the Department of Defense through the Maritime Supply Chain under solicitation SPE7M1-26-T-239C. The item must be delivered within 20 days to the destination FOB, with no variance allowed in quantity, and is subject to inspection and acceptance at the delivery point. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including palletization per DLA Packaging Requirements, and no special identification markings are required beyond standard procedures. The supply is destined for USS GEORGE WASHINGTON CVN 73 at FPO AP 96607, with transportation governed by specific DLA procedural notes and the use of VSM for shipment tracking. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, with the applicable revision tied to the solicitation or award date depending on acquisition type. The contractor must implement Configuration Change Management, including formal Engineering Change Proposal and Variance Request procedures, and adhere to Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Government-specific identifiers must be removed from non-accepted supplies, and all delivered items must be tracked using the provided purchase request and contract line item details. The contract includes government-only fields for internal tracking, and the response deadline, posting date, and delivery requirements are set for mid-2026, with point of contact information provided for inquiries and coordination.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-362U
The contract pertains to the procurement of a electrical plug connector identified by NSN 5935016417302 and part number 085212 from SAUER COMPRESSORS USA, INC., with a quantity of 12 units required under solicitation SPE7M5-26-T-362U. Delivery is due within 123 days from the contract date, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and unit packaging codes, and palletization must adhere to DLA packaging requirements. The item is classified as a critical application and is subject to strict prohibitions on the use of ozone-depleting substances and mercury compounds in any phase of manufacturing, preservation, or packaging, unless explicit written approval from the contracting officer is obtained. Commercial items as defined in FAR 11.001 and part-numbered-only items are exempt from the ozone-depleting substance restriction. The delivery address is the DLA Distribution facility in New Cumberland, PA, and the required ship date is December 12, 2026. The contract allows no variance in quantity, with a strict zero percent plus or minus tolerance. Technical and quality requirements referenced in the DLA Master List govern performance, and all markings and documentation must align with federal standards applicable to defense procurement.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-10ME
The contract pertains to the procurement of two cable assemblies identified by part number 1057390-001 and NSN 5995-01-633-5201, with a unit price of $2.00 per unit and a total price of $4.00. Delivery is required within 10 days from the contract award, FOB origin, with no tolerance for quantity variance. The items must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging shall adhere to DLA’s standardized requirements, and palletization must meet the specified DLA guidelines. The product is subject to technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, and the supplier must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Sampling and inspection procedures follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated. Acceptance and inspection occur at the destination, with delivery directed to Storck Barracks, Building 6503, Illesheim, Germany. The contract is managed under solicitation SPE4A6-26-T-10ME, with a required delivery date of July 23, 2026, and is tied to project code 9GU TP 3. The contracting officer is Amanda Stewart of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M1-26-T-248U
A check valve with NSN 4820-01-646-8828 and part number 509-700-112 is being procured in a quantity of 50 units under solicitation SPE7M1-26-T-248U, with a total contract value of $2,500 at $50 per unit. Delivery is required within five days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated military address at Yokosuka Naval Base, Japan, with the point of contact for inquiries being Misty Eckard. The original required delivery date is August 5, 2026, and the contract incorporates all applicable technical, quality, and packaging specifications from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M1-26-T-248N
A ball valve is being procured for use in the E/I hydraulic system with the NSN 4820-01-516-5621, quantity one, under purchase request 7017726989. This is a commercial off-the-shelf item, and the procurement is governed by DLA packaging requirements and technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, where revisions are controlled based on the solicitation or award date depending on acquisition size. The item is subject to the requirement for removal of government identification from non-accepted supplies. Delivery must be completed within five days of award, with the place of performance specified as Jacksonville, Florida, zip code 32226-3404. The solicitation number is SPE7M1-26-T-248N, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332911 and the procuring agency is the U.S. Department of Defense through the Maritime Supply Chain. The primary point of contact is Misty Eckard, reachable via email and phone provided.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-249C
The contract is for the procurement of one fluid filter element with NSN 4330-01-534-4559 and part number 22201388 from CLARK EQUIPMENT CO, under solicitation SPE7M1-26-T-249C. Delivery is required within ten days to Fort Sill, Oklahoma, with FOB origin terms, and no variance in quantity is permitted. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, and packaging must reflect the specified QUP. Shipment must be made by the fastest traceable means, excluding parcel post, to the designated military facility with detailed marking instructions and a unique tracking identifier. The required delivery date is July 30, 2026, and the contract references specific technical and quality standards incorporated by reference from the DLA Master List, which governs all performance and compliance criteria. All government-specific identifiers, codes, and contact details are included for internal processing and tracking purposes, and the point of contact for the acquisition is Michael Reese of the Department of Defense’s Maritime Supply Chain.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-248K
The contract is for the procurement of a transformer, power, identified by NSN 5950000818787 and part number 9100-0342 from Keysight Technologies Inc, with a quantity of 30 units, each priced at $30.00, totaling $900.00. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must meet MIL-STD-129 labeling standards, and if the item is classified as hazardous under FED-STD-313, it must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item is to be palletized according to RP001 standards, and the Unit of Issue is EA with a Quantity per Unit Pack of 001. Shipping instructions direct delivery to the Distribution Management Office at Camp Kinser, Japan, with the marked-for address identical to the shipping address. Transportation guidelines reference DLAD Proc Note C19 for general freight and C20 for first destination. The original required delivery date is July 31, 2026, and the contract is issued under solicitation SPE7M1-26-T-248K, with the NAICS code 335311 and managed by the Department of Defense’s Maritime Supply Chain. The point of contact is Ryan Snyder, with email and phone details provided for inquiries.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-248X
This contract requires the delivery of one power supply unit with NSN 6120-01-624-4579 under solicitation SPE7M1-26-T-248X, with a firm delivery deadline of 20 days from award and FOB origin terms. The item must comply with stringent environmental and material restrictions: Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by specification. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. All packaging must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization conforming to DLA’s RP001 requirements, and the Unit of Issue and Quantity per Unit Pack must match the contract exactly. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The unit is to be shipped to MCAS Futenma, Okinawa, Japan, with all shipping and transportation protocols governed by DLAD PROC Notes C19 and C20. The required delivery date is July 31, 2026, with no variance permitted in quantity.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
DIBBS
BEARING ASSEMBLY, PU
Solicitation # SPE7M1-26-T-248L
The contract is for one bearing assembly, part number 818404-000K, manufactured by Armstrong Pumps Inc, designated by NSN 4320-01-075-3027, intended for use on a booster pump in a Bell & Gossett HS-105 application. Delivery is required within 20 days from contract award, with shipment FOB destination and no tolerance for quantity variance. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for labeling, with no special marking required. Palletization follows DLA packaging requirements, and the item must be shipped to the specified FPO address for USNS SALVOR. The contract prohibits the use of ozone-depleting chemicals and strictly forbids the intentional addition of mercury or mercury-containing compounds except in narrowly defined exceptions such as functional components in batteries, fluorescent lights, or instruments approved by NAVSEA. If mercury is present in portable lamps or instruments, a second containment boundary and shockproof design are mandatory per NAVSEA 5100-003D. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract is issued under the U.S. Department of Defense via DLA, with payment and logistics managed through designated DLA vendor systems and transportation protocols as defined in DLAD PROC NOTES C19 and C20. The required delivery date is July 30, 2026, and primary point of contact is Michael Reese at DLA.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
RING, CONTROL, FLUID
Solicitation # SPE7M1-26-T-249B
The contract pertains to the procurement of a RING, CONTROL, FLUID with NSN 4330-01-470-6033 and part number 7527, manufactured by Better Engineering Manufacturing Inc, under solicitation SPE7M1-26-T-249B. A single unit is required to be delivered within 20 days FOB destination, with no tolerance for variance in quantity. Delivery must be made to USS NEW YORK LPD 21 at FPO AA 34092 using the fastest traceable means, explicitly prohibiting parcel post. Packaging must comply with MIL-STD-2073-1E and marking in accordance with MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and the unit of issue is each. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Acceptance occurs at the destination point, and the original required delivery date is July 30, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date as applicable. The contracting officer is Michael Reese, reachable at michael.reese@dla.mil, and the solicitation was posted August 4, 2026, with a response deadline of August 17, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7M1-26-T-249A
This contract specifies the procurement of two valve bodies identified by NSN 4820-01-416-7875 and part number J41548, supplied by approved vendors including INDUSTRIAL SERVICE AND SUPPLY, INC and PULSAFEEDER INC. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. The items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements outlined in MIL-STD-129, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and any portable mercury-containing devices must include shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. The delivery destination is Fort Eustis, Virginia, with shipments required to be sent via the fastest traceable means excluding parcel post. The contract falls under DLA’s technical and quality requirements referenced from the DLA Master List, and the acquisition is subject to the version of that list in effect on the solicitation issue date. The purchase request number is 7017722221 with a total price of $2.00 per unit, and the required delivery date is August 4, 2026. The contracting office is under the Department of Defense’s Maritime Supply Chain, with contract data managed through the DIBBS system and point of contact listed as Misty Eckard.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
MEDIA CONVERTER, FIB
Solicitation # SPE7M1-26-T-249G
The contract is for the procurement of two fiber optic media converters under NSN 6030-01-568-3828, with a delivery requirement within 20 days after contract award. The solicitation number is SPE7M1-26-T-249G, issued by the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact. The offeror must comply with all DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation issue or award date depending on acquisition size. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specified functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-approved chemical reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Any alternate offeror must provide a complete data package covering both the approved and alternate part, and all government identification must be removed from non-accepted supplies. The response deadline is August 17, 2026, with performance to occur at Augusta, Maine, ZIP 04333-0032.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
REPAIR KIT, VALVE
Solicitation # SPE7M1-26-T-248T
The contract is for a repair kit for a valve with NSN 4820-01-622-4438 and part number 0888830, supplied by Watts Regulator Co, under solicitation SPE7M1-26-T-248T. Two kits are required to be delivered within five days to a military destination in APO AE 09865-0061, with delivery terms FOB destination and zero tolerance for quantity variance. The items must be packaged and preserved in strict compliance with MIL-STD-2073-1E Appendix D for kits and marked in accordance with MIL-STD-129, with palletization following DLA packaging requirements. The repair kit must not contain any intentionally added mercury or mercury compounds except in specific exempted devices such as functional batteries or weapon systems, and portable fluorescent lamps or instruments containing mercury must have shock-proof housing and a secondary containment boundary as per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of manufacture or processing is prohibited unless written approval is obtained from the contracting officer, and this restriction overrides all other specifications without diminishing product performance standards. Packaging data includes specific preservation methods and materials designated as ZZ, and the unit of issue is KT. Delivery is scheduled for August 3, 2026, with no flexibility on the required date. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The contract is managed under the Department of Defense’s Maritime Supply Chain, and point of contact is Misty Eckard.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334514
New
DIBBS
MONITOR, VOLTAGE DEV
Solicitation # SPE7M1-26-T-248P
The contract calls for the supply of one Voltage Monitor device, identified by NSN 6110-01-385-5413, under solicitation SPE7M1-26-T-248P, with a delivery requirement of 20 days after award. The item is part of a federal procurement managed by the Department of Defense’s Maritime Supply Chain, with performance designated to FPO, 96686. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The supplier must comply with DLA packaging standards, ensure proper measuring and test equipment is used, and remove any government identification from rejected items. The product must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or specified chemical reagents. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier as per NAVSEA 5100-003D. No existing data package is available, so the alternate offeror must submit complete technical data for both the primary and alternate parts. The solicitation closes on August 17, 2026, and inquiries can be directed to Michael Reese at the provided contact information.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-248V
The contract is for one magnetic contactor with NSN 6110-01-682-7290 and part number MX52CD, supplied by Sensata Technologies, Inc., under solicitation SPE7M1-26-T-248V. Delivery is required within 10 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging is to be unitized in containment type D3 with preservative method 41 and packed under code U. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware unless part of approved exemptions such as batteries, fluorescent lamps, or weapon systems, and any portable devices containing mercury must be shock-proof with secondary containment as specified by NAVSEA 5100-003D. The delivery address is the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment governed by DLAD procedures C19 and C20. The contract is subject to DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The solicitation was posted August 4, 2026, with responses due August 17, 2026, and is classified under NAICS 335312 for electrical equipment manufacturing.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details