Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Combined Sources Sought and Notice of Intent to Award a Sole-Source Contract for the Procurement of up to Twelve (12) AH-64E Aircraft

Active
W58RGZ-26-C-0002P00100Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army Contracting Command - Redstone Arsenal, on behalf of the Apache Attack Helicopter Project Management Office, is conducting market research while simultaneously notifying the public of its intent to award a sole-source contract to The Boeing Company for the procurement of up to twelve AH-64E Apache attack helicopters. This effort, to be incorporated under contract W58RGZ-26-C-0002, spans a 53-month period and includes the remanufacture of the aircraft, management of critical electronic component obsolescence, redesign, qualification, and full lifecycle support. Boeing is identified as the sole entity with the proprietary data, technical expertise, and manufacturing infrastructure required to produce the AH-64E, as the government lacks a complete production-level Technical Data Package and rights to essential proprietary information. Despite the intent to proceed with a sole-source award under FAR 6.103-1, all responsible entities are invited to submit a voluntary capability statement of no more than ten pages demonstrating their ability to meet the technical, logistical, and production demands of the program. Submissions must be sent electronically to the designated contracting officer and specialist by August 19, 2026, and while they will be considered for market research purposes, they do not constitute a solicitation, nor will costs incurred in response be reimbursed. The contract action is not subject to any set-aside, and the final decision to proceed remains entirely at the government’s discretion.

General Info

U.S. Army plans sole-source contract to Boeing for 12 AH-64E Apache helicopters with 53-month lifecycle support.

Agency

Department Of Defense → W6QK Acc-RsaView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

AZ, 85215, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Rsa
Contacts2 people available
OfficeREDSTONE ARSENAL, AL, 35898-0000, USA
Organization / Agency
Department Of Defense → W6QK Acc-Rsa
View Agency Profile
Office AddressREDSTONE ARSENAL, AL, 35898-0000, USA
Contacts
Jeffrey J. Decker
Viola N. Howard

Full Description

Show more

This is a combined Sources Sought and Notice of Intent to award a sole-source contract, issued for the purposes of market research and to satisfy the synopsis requirements.


1.  The Army Contracting Command - Redstone Arsenal (ACC-RSA), on behalf of the Apache Attack Helicopter Project Management Office (Apache PMO), is conducting market research to identify parties having an interest in and the resources to support the procurement of up to twelve (12) Apache AH-64E aircraft. The Government intends to solicit and negotiate with only one source under the authority of Revolutionary FAR Overhaul (RFO) 6.103-1, "Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements." The intended source is The Boeing Company (CAGE: 8V613).


The requirement is for a new 53-month effort to be incorporated into contract number W58RGZ-26-C-0002 to provide up to (12) Apache AH-64E aircraft. This action includes all resources, material, and services necessary to produce, support, and provide up to 12 Apache AH-64E aircraft. The technical scope includes the remanufacture of up to 12 Apache aircraft, and management and mitigation of obsolescence for critical electronic components, including redesign and qualification efforts.


The AH-64E is the Army’s premier Attack Helicopter, and its production requires a highly specialized skill set and proprietary data. The Boeing Company is the sole designer, developer, manufacturer, and system integrator of the AH-64 Apache aircraft. The Government does not own a complete production-level Technical Data Package (TDP) or the rights to the proprietary data necessary to complete this procurement.


2. Submission of Capability Statements


Notwithstanding the Government's intent to award a sole-source contract, all responsible sources are encouraged to submit a capability statement demonstrating their ability to meet the requirements outlined above.


Interested parties must submit a capability statement that is no more than ten (10) pages in length. The capability statement should provide clear and convincing evidence that the respondent has the necessary technical expertise, proprietary data or data rights, facilities, and experience to manufacture, assemble, integrate, and support the AH-64E aircraft.


The capability statement should be submitted electronically to the following points of contact no later than the response date specified in this notice:


  • Contracting Officer: Jeffrey J. Decker, jeffrey.j.decker2.civ@army.mil
  • Contract Specialist: Viola N. Howard, viola.n.howard.civ@army.mil

3. Disclaimer


This is not a solicitation and does not constitute a Request for Proposal (RFP). Submission of a capability statement is voluntary, and the Government will not pay for any information or administrative costs incurred in response to this notice. The information provided will be used solely for market research purposes. A determination by the Government not to complete this proposed contract action based upon responses to this notice is solely within the discretion of the Government.

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
DIBBS
COVER, ACCESS
Solicitation # SPE4A6-26-T-12QJ
The contract pertains to the procurement of a covered access item identified by NSN 5340-01-118-1950 and part number 70400-21621-045, with a quantity of six units, under solicitation SPE4A6-26-T-12QJ. The item must comply with mandatory cybersecurity requirements under CMMC Level 2 Self-Assessment and adhere to detailed technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, including physical identification, supply chain traceability documentation retention per DLAD Procurement Note C03, and packaging standards per MIL-STD-129 and ASTM D3951 if non-hazardous, with prioritized precedence given to DLA requirements. Item Unique Identification is not required per customer request, and sampling must follow Sikorsky Corporation’s approved alternate plan QAP 1201, consistent with ASQ H1331 or MIL-STD-1916. Delivery is FOB origin with zero tolerance for quantity variance, inspection and acceptance occurring at destination, and the item must be packaged and palletized strictly per DLA packaging requirements RP001. The delivery window is 171 days from the award date, with an original required delivery date of April 24, 2027, and a needed ship date of January 31, 2027. The item must be shipped to DLA Distribution San Diego at the specified FOB address, with transportation governed by DLAD Procurement Notes C19 and C20. The contract falls under NAICS code 336411 and is issued by the Department of Defense’s ASC Commodities Division, with primary point of contact Tammy Ballard.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-8870
The contract solicitation SPE7LX-26-U-8870 seeks the supply of 34 gaskets identified by NSN 5330-01-459-0974 and part number 6K404 under a Total Small Business Set-Aside, with NAICS code 336411 and a contract value ceiling of $350,000. Delivery is required within 97 days after award, with FOB Origin terms and destination inspection and acceptance governed by FAR 52.246-2. The item is classified as a commercial item and must be asbestos-free, with any alternative materials requiring prior approval under Clause L30 and Provision 4. Packaging must conform to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV degradation, in compliance with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking. Identification of the item must adhere to MIL-STD-130N, including Unique Item Identification with Data Matrix barcodes. The contract mandates compliance with CMMC Level 2 for cybersecurity, safeguarding covered defense information under DFARS 252.204-7012, and prohibits acquisition of covered defense telecommunications equipment per DFARS 252.204-7018. Contractors must submit electronic invoices via WAWF and provide a Certificate of Conformance prior to shipment. The requirement for a DLA Packaging Compliance Statement and the removal of government identification from non-accepted supplies further govern handling and documentation. The solicitation applies revisions from the DLA Master List of Technical and Quality Requirements, with technical compliance being essential for award under a Lowest Price Technically Acceptable methodology. All offerors must certify socioeconomic status as a small business and declare any joint ventures, providing UEI and CAGE codes where applicable. Provisions for employment eligibility, combating human trafficking, equal opportunity for workers with disabilities, and whistleblower protections are incorporated, along with restrictions on compensation of former DoD officials and compliance with hazardous material handling standards under DFARS 252.223-7006 and 252.223-7001. No attachments are listed, and detailed delivery locations or pricing are subject to the Schedule.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336411
New
DIBBS
ADAPTER, TAIL ROTOR
Solicitation # SPE4A5-26-T-330C
The contract is for the procurement of an Adapter, Tail Rotor with NSN 1615-00-125-4120 and part number 206-040-328-003 from Bell Textron Inc, requiring eight units to be delivered within five days FOB origin. Manufacturing may involve casting or forging, and the government does not necessarily possess the required tooling, necessitating vendors to seek assistance through DLA’s Casting and Forging Assistance Request portal if needed. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size. The item is classified as a critical application, and cybersecurity compliance requires a CMMC Level 2 Self-Assessment. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Unit identification is not mandated per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Inspection and acceptance occur at origin, with sampling following MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances for acceptance unless otherwise specified. Attributes are assigned verification levels or AQLs as critical, major, or minor, with unspecified features treated as major. Palletization adheres to DLA packaging standards. The delivery destination is in Bogotá, Colombia, with Freight Forwarder Forward Systems Group handling logistics, and the contract is under solicitation SPE4A5-26-T-330C with a response deadline of August 12, 2026, and an original required delivery date of October 31, 2024.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9253
The contract covers the procurement of 2,356 gaskets identified by NSN 5330-01-472-4538 under solicitation SPE7LX-26-U-9253, with a delivery deadline 116 days after award. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and hardware must conform to the current revision of the applicable part standard, with prior revisions only acceptable for units manufactured before the solicitation date. All gaskets must be manufactured without asbestos, and any substitution requires approval under Clause L30 and Provision 4 conditions. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, ensuring the items are sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract is governed under the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment requirements, indicating the contractor must demonstrate foundational cybersecurity practices. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and falls under NAICS code 336411 for automotive parts manufacturing. Performance is under the purview of the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336411
New
DIBBS
SCREW, EXTERNALLY RELIE
Solicitation # SPE4A6-26-T-11ZH
The contract specifies the procurement of 94 screws with an externally relieved body, identified by NSN 5305-01-296-2846, under solicitation SPE4A6-26-T-11ZH, with a delivery deadline of 171 days from order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with the revision in effect at the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have government identification removed prior to return. Sampling and inspection procedures follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major unless otherwise stated. The item includes technical data subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and approval by DLA to handle such data. The contract is issued by the Defense Logistics Agency’s ASC Commodities Division, with performance located in New Cumberland, PA, and all technical requirements are accessible through the DLA eProcurement portal.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
FLANGE ASSEMBLY, BRA
Solicitation # SPE4A7-26-T-616Q
The contract pertains to the procurement of a flange assembly for brake systems, identified by part number 4740228 and NSN 1615-01-202-7126, with a quantity of 41 units to be delivered FOB origin within 131 days of contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with configuration control, inspection, and acceptance procedures strictly defined, including adherence to RQ009 for origin inspection and RQ011 for removal of government identification from non-accepted items. Quality assurance follows non-tailored ISO 9001:2015 standards, and sampling must conform to MIL-STD-1916 or equivalent zero-based plans, with unspecified attributes treated as major and acceptance criteria requiring zero non-conformances unless otherwise stipulated. The item is designated a critical application component, and cybersecurity compliance mandates a CMMC Level 2 self-assessment. Packaging must comply with MIL-STD-2073-1E and DLA packaging directives, including marking per MIL-STD-129 and palletization per RP001. Technical data is proprietary and insufficient for competitive procurement, with no approved technical data package currently available. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 22, 2026, and an original delivery deadline of February 24, 2027. The unit price is $41.00 per unit, totaling $1,681.00, and the contract is administered under solicitation SPE4A7-26-T-616Q by the Department of Defense, with Amber Wells as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913H
The contract pertains to the procurement of a single gasket with National Stock Number 5330-12-322-7856 and part number 5550740780, to be delivered in one unit under solicitation SPE7L1-26-T-913H. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, particularly due to its use in Federal Supply Classes 5330/5331. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods including dry preservation and cushioning material JB, and markings must comply with MIL-STD-129, including the special shelf-life code 32. The gasket is explicitly exempt from asbestos under FED-STD-313, and multiple manufacturer part numbers are acceptable as listed. Delivery is FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery window is twenty days from the award date, with an original required delivery date of July 31, 2026, and shipping must be by the fastest traceable means, excluding parcel post, to the designated FPO address via Vessel Shipment RDD 777. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or amendment date. Government use identifiers and shipping codes are provided for logistics tracking, and the primary point of contact is Kristina Derry at DLA Land and Maritime.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336411
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-278H
The contract solicitation SPE7M4-26-T-278H seeks the procurement of nine metallic tubes (NSN 4710-01-174-5386) under simplified acquisition procedures with a delivery deadline of February 6, 2027, and a 168-day ADO performance period. The items must be delivered FOB Origin to the specified location in Albany, Georgia, and are subject to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersedes all other referenced specifications. Packaging and labeling must fully comply with MIL-STD-129 for marking, including NSN, unit of issue, and quantity per unit pack, while adhering to DLA Packaging Requirements for Procurement (RP001) and ASTM D3951 unless overridden by DLA standards. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized. Technical data associated with the item is classified as export-controlled under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and contractors must be approved by DLA to access such data through the US/Canada Joint Certification Program and completion of required export control training. The contractor must be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring full implementation of NIST SP 800-171 safeguards for Covered Defense Information and reporting of any cyber incidents within 72 hours. The contract includes mandatory clauses for combating trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, and accelerated payments to small business subcontractors. All invoicing must be submitted electronically through Wide Area WorkFlow, and payment processing is managed via the Local Processing Office using DoDAAC routing codes. Offerors must represent their small business size status and socioeconomic certifications in SAM.gov and provide Unique Entity Identifiers and CAGE codes if involved in covered defense telecommunications. The solicitation is open to full and open competition with no set-aside designation, and award is expected to be based on price competitiveness combined with technical compliance, though the precise evaluation methodology is not disclosed.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336411
New
DIBBS
BRACKET ASSEMBLY, MICROPHONE, OXYGEN MASK
Solicitation # SPE4A7-26-R-0713
The contract is for a Bracket Assembly, Microphone, Oxygen Mask with NSN 1660-011138365 and WSIC F, procured by DLA Aviation under solicitation SPE4A726R0713. It will be awarded as an indefinite quantity contract with a five-year base period and no options, targeting an annual quantity of 5,404 units, with minimum and maximum delivery order quantities of 1,056 and 5,404 units respectively. First Article Testing is mandatory, and the delivery timeline includes 150 days to submit test samples, 150 days for government evaluation and notification, followed by 195 days for production delivery, totaling 495 days. Inspection and acceptance occur at origin, with FOB origin terms. This is a DLA direct procurement and is not designated as a critical safety item. The solicitation is issued as a 100% small business set-aside, and awards will be based on equal weighting of price, past performance, and delivery, with final decisions possibly incorporating SPRS and other evaluation factors as detailed in the solicitation. Offers must be submitted in writing. The solicitation will be publicly posted on the DLA Internet Bid Board System (DIBBS) on or around August 4, 2026, with no paper copies available. Interested parties must access the full solicitation in PDF format via DIBBS, requiring Adobe Acrobat Reader. The response deadline for submissions is September 3, 2026. The point of contact is Thuy Ho at Thuy.Ho@dla.mil, with the issuing office located in Richmond, Virginia. The NAICS code is 336411, reflecting classification under Aircraft and Parts Manufacturing, and the contracting activity falls under the Department of Defense’s DLA Aviation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336411
New
DIBBS
TURBINE WHEEL, AIRCR
Solicitation # SPE4A5-26-T-321G
The contract is for the procurement of 30 turbine wheels for aircraft applications, identified by part number 205424 and NSN 1660-00-594-7233, sourced from Honeywell International Inc. The item is classified as a commercial item and is designated as a critical application component, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications. Compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization is mandatory, with all packaging subject to DLA’s overarching requirements. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute verification levels assigned per critical, major, and minor characteristics. Delivery is scheduled for 739 days after award, with FOB origin shipment terms and inspection and acceptance occurring at destination. The unit of issue is each, with no variance permitted in quantity. The delivery address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the need ship date is August 21, 2028, with an original required delivery date of November 1, 2028. Cybersecurity requirements include CMMC Level 2 self-assessment, and the contractor must comply with all applicable defense information handling standards. The item is not required to carry Unique Identification under DFARS 252.211-7003, as specified by the service customer. The contract was issued under solicitation SPE4A5-26-T-321G, with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
DISK, VALVE
Solicitation # SPE4A5-26-T-326T
This contract specifies the procurement of a metallic disc valve, identified by part number 2284W225 and NSN 1660997394942, with a quantity of 14 units. The item is subject to technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with sampling protocols per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stipulated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The supplier must adhere to DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization must follow DLA packaging requirements and be grouped in lots of 200 per intermediate container. The valve is to be delivered FOB origin within 171 days to Tinker AFB, Oklahoma, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Cybersecurity requirements include CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Unit of issue is each, and the contract includes transportation directives referencing DLAD procedural notes C19 and C20. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 336411, managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
SUPPORT, UPPER
Solicitation # SPE4A6-26-T-12QX
This contract, issued under solicitation number SPE4A6-26-T-12QX by the Department of Defense’s ASC Commodities Division, pertains to the procurement of 72 units of a support component identified by NSN 1615-01-099-2350, with a unit of issue as each and a total contract value based on a unit price of $72.00. Delivery is required within 171 days from the award date, with FOB origin terms, inspection and acceptance occurring at the destination warehouse in Tracy, California. Packaging must comply with ASTM D3951, but is superseded by higher-priority DLA Master List technical and quality requirements, including mandatory adherence to MIL-STD-129 for marking and labeling, and RP001 for palletization standards. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03 (August 2016), while government identification must be removed from non-accepted items under RQ011. The contractor is required to meet CMMC Level 2 self-assessment standards for cybersecurity and employ an approved alternate sampling plan per SIKORSKY CORPORATION’s QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916. Physical identification of the item is required under RQ017, and measuring and test equipment must comply with RT001 specifications. Item Unique Identification is waived per customer request. The delivery address is the DLA Distribution San Joaquin facility, and transportation logistics must align with DLAD Procurement Notes C19 and C20. The original required delivery date is September 19, 2027, with a needed ship date of January 31, 2027.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

NAICS: 541611
New
Federal
Organizational Conflict of Interest (OCI) Mitigation PlanningThe contract requires the development of organizational conflict of interest (OCI) mitigation plans aligned with Federal Acquisition Regulation (FAR) 9.5 to address potential conflicts arising from vendors with prior advisory roles or dual responsibilities as both integrators and suppliers. These plans must be comprehensive, clearly defined, and designed to ensure impartiality and fairness in government contracting by preventing any undue advantage or influence that could compromise the integrity of procurement processes. The mitigation strategies must be tailored to each vendor’s specific history and role, incorporating structural, procedural, and information controls to isolate sensitive data and decision-making functions. This subcontract is issued under the NAICS code 541611, indicating it pertains to management consulting services, and is tied to the Department of Defense through the agency designation W6QK Acc-Rsa. The solicitation was posted on August 4, 2026, with a response deadline of August 3, 2031, providing a five-year window for submission and performance. While no specific place of performance or point of contact is listed, the work is expected to support defense procurement integrity across all relevant locations. The absence of a set-aside designation suggests the contract is open to all qualified entities, with emphasis on technical compliance and robust OCI mitigation frameworks rather than socioeconomic preferences.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 541611
New
Federal
Supply Chain Verification and Compliance ServicesThe contract requires the performance of comprehensive supply chain verification services to ensure adherence to National Defense Authorization Act provisions, specifically Sections 848, 817, and 1821, which mandate the exclusion of certain compromised telecommunications and video surveillance equipment sourced from designated foreign adversaries. The work involves conducting detailed audits of the entire supply chain, verifying the origin of all components, and producing accurate Bill of Materials and Software Bill of Materials documentation to demonstrate full compliance with federal security requirements. This effort is critical to safeguarding defense-related systems from potential threats posed by embedded hardware or software from prohibited entities. The contract is structured as a subcontract under the Department of Defense, identified by the agency name W6QK Acc-Rsa, and falls under the NAICS code 541611 for management consulting services. It has a long performance window with a response deadline extending through August 3, 2031, indicating a multi-year engagement that may involve phased deliverables or ongoing compliance monitoring. The place of performance and point of contact details are not specified, suggesting flexibility in execution location but requiring the contractor to coordinate effectively with the agency to meet reporting and verification obligations. Compliance is non-negotiable and must be maintained continuously throughout the contract term.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 334512
New
Federal
UAS Mission Payload Development and SupplyThe contract requires the design, supply, and integration of modular mission payloads for Group 3 unmanned aerial systems, with a focus on electro-optical and infrared sensors, signals intelligence modules, electronic warfare suites, and communications relay systems. These payloads must be compatible with existing UAS platforms and engineered for rapid deployment, interoperability, and mission adaptability across diverse operational environments. The work involves both developmental engineering and production-scale manufacturing, ensuring that each payload meets rigorous performance, reliability, and environmental standards for military use. The contract is structured as a subcontract under the Department of Defense, managed by the W6QK Acc-Rsa office, with a response deadline extending through August 3, 2031, indicating a long-term commitment to capability development. The North American Industry Classification System code 334512 confirms the scope centers on electronic manufacturing for navigational, measuring, electromedical, and control instruments, aligning with advanced sensor and communications systems. All work is expected to occur in support of DOD operational requirements, though specific performance locations are not detailed, allowing flexibility in manufacturing and integration facilities. The open-ended timeline suggests ongoing iterations and potential future modifications as mission needs evolve.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 334511
New
Federal
Group 3 Uncrewed Aircraft System (UAS) Supply and IntegrationThe contract involves the supply and integration of production-ready Group 3 Uncrewed Aircraft Systems tailored for military operations including reconnaissance, surveillance, target acquisition, electronic warfare, and strike missions. These platforms are intended to be fully operational and mission-ready, supporting a broad spectrum of tactical objectives across diverse environments. The solicitation is structured as a subcontract under the Department of Defense, with the agency identified as W6QK Acc-Rsa, and is governed by the NAICS code 334511, indicating classification within the Aircraft and Parts Manufacturing sector. The response deadline for this opportunity is set for August 3, 2031, allowing for a multi-year window to submit proposals and execute integration efforts. While details such as location, point of contact, and set-aside status are not specified, the emphasis is on delivering systems that meet stringent military standards for reliability, interoperability, and real-time performance. The contract aims to enhance operational capabilities through advanced UAS technology, ensuring readiness for high-stakes defense missions with minimal logistical overhead. No geographic restrictions or special eligibility provisions are noted, suggesting the opportunity is open to qualified industrial partners capable of scaling production and deployment.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 332911
New
Federal
Pre-Solicitation Synopsis for Overhaul of the Hydraulic Valve
Solicitation # W58RGZ-26-B-0024
The U.S. Army Contracting Command - Redstone Arsenal is conducting market research to identify qualified sources capable of overhauling the Hydraulic Valve with NSN 4810-01-096-1056 and P/N 70652-02450-109 for the UH-60 Black Hawk helicopter. This effort seeks to determine industry interest and technological readiness ahead of a potential five-year, Firm-Fixed-Price, Indefinite Delivery Indefinite Quantity contract with estimated annual quantities ranging from a minimum of 40 units to a maximum of 232 units, including up to 32 units for Foreign Military Sales. The procurement may be set-aside entirely or partially for small businesses, or awarded through full and open competition based on responses to this notice, with the applicable NAICS code being 332911 and a small business size standard of 750 employees. Interested parties must submit a capabilities statement of no more than ten pages in 10-point font or larger, presented in bullet format, demonstrating ability to perform the overhaul with supporting documentation on organizational capacity, personnel qualifications, and any planned subcontracting or teaming arrangements. Submissions must include organizational details such as name, address, primary and secondary points of contact, website, phone, and ownership type, and must be emailed as a Word or PDF file to the designated Contract Specialist by 12:00 p.m. Central Daylight Time on July 28, 2026, with the synopsis number included in the subject line. This is not a solicitation, no funds are available for response preparation, and no obligation is incurred by the government to award a contract. All submitted information marked as proprietary will be protected, and classified material must not be included. Responses will not be returned or acknowledged, and no feedback will be provided to participants.
Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
Call for Solutions - Enterprise Transformation Capability for the Army's Organic Industrial Base (OIB)
Solicitation # PANRSA26P0000034783
The Army Contracting Command - Redstone Arsenal is issuing a Call for Solutions under the Army Open Solicitation W9128Z-25-S-A002 to establish a Government-owned Enterprise Industrial Transformation Capability for the Organic Industrial Base (OIB), aligned with the 2026 National Defense Strategy’s goal to supercharge the U.S. Defense Industrial Base. This initiative seeks a vendor-neutral, solution-agnostic partner to engineer and institutionalize repeatable, enterprise-wide methodologies that enable synchronized modernization across the OIB, addressing the current fragmentation in investments and lack of coherent decision-making frameworks. The contractor will not implement solutions or assume decision-making authority; instead, they will develop advisory tools, analytical models, and transformation roadmaps to empower the Government to make informed, strategic choices regarding industrial base modernization, with all foreground intellectual property delivered with Government Purpose Rights or Unlimited Rights. The procurement is structured as a Firm Fixed Price Indefinite Delivery, Indefinite Quantity (IDIQ) contract with a $50 million ceiling over five 12-month ordering periods, and the Government retains full authority over policy, prioritization, investment, and operational decisions. Submission is limited to a Phase 1 Solution Brief of no more than five pages or fifteen slides, excluding the title page and Organizational Conflict of Interest (OCI) analysis, which must be submitted separately and is mandatory for all offerors. The OCI requirement includes a detailed analysis of actual or potential conflicts, with a mitigation plan if conflicts exist, and imposes a strict prohibition on awardees or their subcontractors from competing for any subsequent implementation contracts derived from their advisory work. Offerors must be registered in SAM.gov with an active Unique Entity ID and comply with CMMC Level 2 cybersecurity requirements for handling Controlled Unclassified Information, though facility clearances are not required for award. Invoicing must be processed through Wide Area Work Flow, and proposals must be submitted via email by the revised deadline of August 4, 2026, at 5:00 PM Eastern Standard Time. Evaluation focuses on Technical Merit, Schedule, and Viability, with selection based on a trade-off process that prioritizes technical excellence and long-term sustainability over price, and the contract administration is managed by the Redstone Arsenal contracting office with no DCAA accounting system required due to the fixed-price nature of the award.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336411
New
Federal
Drone Marketplace Onboarding of Group 3 UAS
Solicitation # W58RGZ-26-S-C001-0008
The U.S. Army Contracting Command – Redstone Arsenal is issuing an open-ended Commercial Solutions Opening to continuously identify, assess, and onboard innovative commercial Group 3 Uncrewed Aircraft Systems onto the Drone Marketplace over a five-year period. Group 3 UAS are defined as aircraft weighing between 55 and 1,320 pounds, operating up to 18,000 feet and at speeds under 250 knots, designed for missions including reconnaissance, surveillance, target acquisition, electronic warfare, communications relay, and cargo delivery. This initiative moves away from traditional acquisition models to a market-driven approach that empowers Soldiers to select the most capable and suitable systems based on mission needs. The program seeks platforms that are production-ready or at least at Technology Readiness Level 7, with lower TRL systems considered if they demonstrate a viable path to maturity. No production contracts or guaranteed orders are awarded during onboarding; instead, vendors are entered into a competitive pool where individual end-users initiate orders based on operational requirements and funding availability. Offerors must meet strict eligibility requirements including full compliance with NDAA Section 848 to exclude Chinese-manufactured components, active SAM.gov registration, a valid CAGE code, a completed NIST SP 800-171 assessment, and adherence to cybersecurity standards including CMMC and DFARS 252.204-7012. Submission follows a three-step process beginning with an Initial Capability Assessment, followed by continuous verification activities to validate system claims, and culminating in a full proposal for a Firm-Fixed-Price Basic Ordering Agreement. Success requires passing an initial review, a live or virtual flight demonstration, an NDAA compliance audit that may involve government-led system tear-downs, and submission of fair and reasonable pricing validated against commercial benchmarks. Systems that meet all criteria are onboarded as either Provisional or Cleared based on supply chain verification and ultimately compete for orders on the marketplace, where selection is based on capability, price, and lead time. The government reserves the right to make multiple, single, or no awards, cancel the call at any time without reimbursement for proposal costs, and use alternate contracting vehicles beyond the BOA. All submissions must include a comprehensive analysis of any actual or potential organizational conflicts of interest, and offerors acknowledge that non-government advisors may review proprietary data under NDA restrictions.
Aircraft Manufacturing

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336411
New
Federal
Call for Solutions (CFS): Drone Marketplace Onboarding of US Payloads, Software, Components, and Enablers/Accessories
Solicitation # W58RGZ-26-S-C001-0007
The U.S. Army Contracting Command – Redstone Arsenal is seeking innovative commercial unmanned systems payloads, software, components, and accessories through a Commercial Solutions Opening under solicitation W58RGZ-26-S-C001-0007, with a response deadline of August 3, 2031. This initiative aims to onboard cutting-edge technologies onto the UAS Marketplace to enhance tactical capabilities at the Brigade, Corps, and Division levels by enabling rapid reconfiguration of unmanned platforms. The focus is on mission-critical payloads such as Electro-Optical/Infrared cameras, LiDAR, Synthetic Aperture Radar, Laser Designators and Rangefinders, Signals Intelligence and Electronic Warfare modules, secure communications relays, and modular cargo delivery systems that can be easily swapped to meet evolving operational needs without altering the underlying aircraft platform. The solicitation is open to commercial providers seeking to integrate their solutions into a scalable, interoperable ecosystem tailored for military use, with an emphasis on modular, adaptable, and field-ready technologies. All submissions must align with the objectives outlined in the accompanying Statement of Objectives and Components document. The contract is administered by the Department of Defense through the Office of ACC-RSA in Redstone Arsenal, Alabama, with primary point of contact Latoya Pryor and secondary point of contact Vaylen Ware, both reachable via the designated email address. The NAICS code 336411 identifies the industry as Aircraft Manufacturing, and the solicitation is actively accessible through the SAM.gov portal for eligible vendors.
Aircraft Manufacturing

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336414
New
Federal
Next Generation Counter-Small UAS Missile (NGCM)
Solicitation # PANRSA-26-P-040123
The U.S. Army is seeking industry input on a Next Generation Counter-Small Unmanned Aircraft System Missile (NGCM) to enhance capabilities against Group 2 and Group 3 small drone threats through extended range, rapid launch, and reduced time-to-target. The initiative aims to develop a missile system capable of engaging targets beyond 16 kilometers at 6 kilometers altitude and up to 25 kilometers at 8 kilometers altitude, with a launch response time under five seconds from operator initiation. The missile must integrate seamlessly with the existing Coyote Launcher and compatibility with the IBCS-M architecture and multiple radar systems including KuRFS, Sentinel A3/A4, LTAMDS, PATRIOT, and TPQ-53, using an all-weather RF seeker. Production costs must not exceed $150,000 per unit at a volume of 5,000 missiles, and the system must achieve Technology Readiness Level 7 by the end of FY2027, with 50 units ready for Operational Assessment by the first quarter of FY2028. Development includes full design documentation, simulation tools, and performance analysis to support integration and testing under the Army’s C-UAS architecture. Vendors are invited to submit an unclassified Capabilities Brief, not exceeding ten pages, detailing their proposed solution, technical specifications, integration approach, security compliance, and supporting services such as engineering, field support, training, logistics, data analytics, and cybersecurity. Proposals must demonstrate compliance with NISP standards, including a Secret-level facility clearance and personnel with Secret clearance and COMSEC access, along with adherence to zero-trust and encryption protocols for both U.S. and Foreign Military Sales applications. All submissions must be in PDF format with a one-slide quad chart appendix and must include proper markings for proprietary or sensitive data. Responses are due by August 20, 2026, submitted via email to the designated contracting representatives, with no telephonic inquiries accepted. Participation is voluntary, non-binding, and at the vendor’s expense; the government reserves the right to use responses for planning purposes only and is under no obligation to proceed with procurement. Information submitted becomes government property and may be shared with non-government advisors under NDA, with protections for confidential commercial data under applicable federal statutes.
Guided Missile and Space Vehicle Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541715
New
Federal
Closed-Circuit Wind Tunnel (24-inch test)
Solicitation # PANRSA-26-P-0000-037658
The U.S. Army Contracting Command-Redstone is conducting market research through a Request for Information to identify capable vendors for the procurement of a closed-circuit wind tunnel to be installed at the Army Primary Standards Laboratory in Redstone Arsenal, Alabama. This specialized facility is intended for use by USATA Engineers and Technicians to support high-precision calibration activities using a Laser Doppler Velocimetry system, which requires the generation of extremely low air velocities down to 0.15 meters per second with a turbulence intensity under 1 percent. The wind tunnel must feature a 24-inch by 24-inch test section with optical-quality glass sidewalls to accommodate a 532-nanometer, 500-milliwatt argon-ion laser, and include seven sealable instrument ports that accept probes ranging from 4.3 to 15.9 millimeters in diameter. A 3/8-inch Swagelok bulkhead fitting upstream of the test section is required for the introduction of Bis(2-ethylhexyl) subacute seed particles, and the test section must include grooves at approximately 90 percent of its length to allow installation of adjustable nozzle restriction plates. A 15-inch section of the test area located six inches upstream of these plates must be replaceable without compromising the integrity of the wind tunnel circuit. The system must have a centrifugal fan with vibration isolation, driven by a variable-frequency drive controlled exclusively through LabVIEW software with no wireless or internet connectivity, and must operate at a maximum speed of approximately 50 meters per second while maintaining the specified turbulence criteria. The entire system, including all associated components, must not exceed 32 feet in length, 8 feet in width, or 7.5 feet in height. Design proposals must include validated quantitative analysis, such as computational fluid dynamics simulations, to demonstrate that all performance requirements are met. The solicitation number is PANRSA-26-P-0000-037658, and responses are due by July 15, 2026, to be submitted via email to designated Army contracting personnel. This is strictly a market research effort under FAR 15.201(e) and does not constitute a solicitation for contract award; no contract value, delivery schedule, or payment information has been established at this stage. Respondents are required to provide their CAGE code, Unique Entity Identifier, business size classification according to NAICS code 54
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

2 days ago

DEADLINE

in 2 days
View Details