Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Commercial Kitchen Equipment Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and delivery of commercial steam table pans designed for use in military kitchen operations located in Germany, with strict adherence to federal sustainability standards requiring compliance with ENERGY STAR® and BioPreferred® certifications. All products must be properly packaged and labeled to meet regulatory and logistical requirements, ensuring seamless integration into the Defense Logistics Agency’s supply chain. The equipment is classified under NAICS code 333241, indicating it falls within the commercial kitchen equipment manufacturing sector, and is procured as a subcontract under the Department of Defense’s broader procurement framework. Delivery is targeted to a military installation in Germany, necessitating international shipping protocols and compliance with U.S. defense logistics procedures. The contract was posted on July 17, 2026, and is managed under the Defense Logistics Agency, which oversees defense-wide material sourcing. While specific details such as quantities, delivery timelines, or pricing are not provided, the emphasis on certified sustainable products underscores a mandatory requirement for environmentally responsible procurement aligned with federal mandates. The contract’s link and unique identifiers confirm its placement within the official DIBBS procurement system, ensuring transparency and traceability within DoD supply operations.

General Info

Supply of certified sustainable steam table pans for German military kitchens via DLA under DoD procurement.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

333241 - Food Product Machinery ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of commercial steam table pans compliant with federal sustainability standards (ENERGY STAR®/BioPreferred®), including proper packaging, labeling, and shipment to a military installation in Germany.

Similar Contracts

Same NAICS industry code

Steam Coil Supply and DeliveryThe contract requires the procurement and delivery of a single left-side steam coil with National Stock Number 7320015059175, specifically for installation on the wash tank of the USS GEORGE WASHINGTON CVN 73. Before finalizing the purchase, the vendor must confirm full compatibility with the existing system to ensure proper function and safety within the vessel’s operational environment. The item is being sourced under a subcontract arrangement, classified under NAICS code 333241, which pertains to other commercial and service machinery manufacturing. The solicitation is managed by the Subsistence FSE Supply Chain under the Department of Defense, with performance required at FPO 96607, indicating delivery to a military fleet post location. Proposals must be submitted by July 30, 2026, with the solicitation posted on July 26, 2026, leaving a limited window for response and coordination. The contract emphasizes precision in specification matching and timely delivery to support the maintenance and readiness of the aircraft carrier.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

TABLE, FOOD PREPARATIONThe contract solicitation SPE3SE-26-T-1061 is for the procurement of four food preparation tables measuring 48 by 30 inches with a marine edge, identified by NSN 7320-00-927-7464 and part number BS-T 48X30ME. Delivery is required within 20 days after award, with a specified delivery date of July 22, 2026, and FOB destination terms apply, meaning the government assumes responsibility for the product upon arrival at the designated location in Greenville, Kentucky. The total estimated value is $2,260 based on a unit price of $565, though the current solicitation does not explicitly state the unit price in Section B. Packaging must conform to ASTM D3951 and strictly adhere to DLA Master List of Technical and Quality Requirements, which take precedence; palletization must follow RP001 guidelines, and all packaging and labeling must comply with MIL-STD-129, including proper unit of issue, quantity per unit pack, and barcoding. No ozone-depleting substances are permitted, and the item is not classified as hazardous under federal statutes requiring alternative labeling. The supplier must provide all documentation via electronic submission on DIBBS by the response deadline of July 30, 2026, and all deliveries must be shipped via traceable means, prohibiting parcel post. Inspection and acceptance occur at the delivery point, and the government retains full authority to assess technical compliance with referenced standards and quality requirements. Contract administration relies on WAWF for invoicing and receiving reports, with payment processing tied to specific DoDAACs not yet disclosed. The solicitation incorporates numerous FAR and DFARS clauses including those governing small business representation, system for award management maintenance, pricing modifications, subcontracting, safeguarding of information systems, and hazardous material disclosures. Suppliers must disclose their size status and unique entity ID, and any hazardous materials require full SDS submission prior to award. The contract does not specify a contract type, option periods, or trade-off evaluation criteria, but the solicitation's structure and automated award indication suggest a Lowest-Priced Technically Acceptable basis for selection. Technical drawings are available only during the open solicitation period via DIBBS, and no formal Section J attachments list is provided despite references to supporting documents.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

STEAM COILThe contract specifies the procurement of a left-side steam coil with NSN 7320-01-505-9175, to be delivered in a single unit within 20 days to the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607. The item is designated for use on the wash tank located on the left side of the machine when standing in front of it, with precise installation requirements to ensure correct placement. Before purchase, the serial number of the machine and the specific tank application—wash or rinse—must be provided to confirm compatibility. The supply must comply with all DLA Master List of Technical and Quality Requirements, which override other standards like ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 guidelines, including proper palletization and labeling. Mercury or mercury-containing compounds are strictly prohibited in direct contact with the item, except for approved exceptions such as batteries or instruments meeting NAVSEA 5100-003D standards, which require shockproof design and secondary containment. The contract designates the item as a critical application with potential covered defense information, and delivery is FOB destination with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The solicitation number is SPE3SE-26-T-1065, with a response deadline of July 30, 2026, and the original required delivery date is July 28, 2026. All shipments must follow DLAD Proc Note C19 for transportation and C20 for first destination movement, and vendors must use VSM for RDD 777 shipments. Contact for inquiries is Joseph Pineiro at DLA.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

REFRIGERATOR-FREEZEThis contract specifies the procurement of a single refrigerator-freezer unit for naval shipboard use, requiring strict adherence to military and environmental standards. The unit must operate on 115 volts, 60 Hz, single phase, and be constructed of stainless steel, with R-134A or R-404A as the only approved refrigerants for food service applications onboard naval vessels; R-290A is explicitly prohibited due to flammability risks, and R-22 is no longer acceptable under current environmental regulations. The equipment must comply with the DLA Master List of Technical and Quality Requirements referenced in the contract, with applicable revisions governed by the solicitation or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly banned unless used in approved exceptions like batteries, fluorescent lamps, or sensors, which must include shockproof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. Technical documentation including naval shipboard manuals and provisioning data is mandatory. The item is designated by NSN 4110-01-378-5105 under solicitation SPE3SE-26-T-1060, with delivery required within five days of award, and is restricted to small business concerns under a total small business set-aside. The point of contact is Connor Tudja of the Department of Defense’s Subsistence FSE Supply Chain, and performance is designated to FPO with a ZIP code of 96322-1400.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

GARBAGE DISPOSAL MAThe contract pertains to the procurement of one unit of garbage disposal equipment identified by NSN 7320-01-629-4903 and part number FD4-125-2, under solicitation SPE3SE-26-T-1064, issued by the Department of Defense through the Subsistence FSE Supply Chain. Delivery is required within 20 days of contract award to the USS PAUL IGNATIUS (DDG-117) at FPO AA 34087, with shipment FOB destination and no tolerance for quantity variance. The item must be packaged in compliance with ASTM D3951 and fully labeled per MIL-STD-129, with palletization adhering to DLA Packaging Requirements RP001, ensuring alignment with all DLA Master List of Technical and Quality Requirements. Inspection and acceptance occur at the point of delivery, and the item is classified as containing Covered Defense Information, necessitating appropriate handling protocols. The shipment must be coordinated using the specified vendor shipment code V50186 and RDD 777, with transportation governed by DLAD Procurement Notes C19 and C20. The original required delivery date is July 28, 2026, with the contract posted on July 26, 2026, and responses due by July 30, 2026. The point of contact for inquiries is Ellina Entin, and the procurement falls under NAICS code 333241 for industrial machinery manufacturing.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

INVERTER DRIVEThe contract solicits a single Inverter Drive with NSN 7310-01-583-1448 under solicitation SPE3SE-26-T-1066, with delivery required within 20 calendar days after award to the USS STERETT (DDG 104) at FPO ZIP 96678 under FOB Destination terms, meaning the contractor bears all transportation costs and risks until delivery. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede other standards such as ASTM D3951 where applicable. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-130N for labeling, barcoding, and identification, with palletization following RP001 DLA Packaging Requirements. Mercury or mercury-containing compounds are strictly prohibited unless functionally essential in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, in which case portable devices must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. The item does not contain or require Class I ozone-depleting substances. No technical data package is available from DLA Troop Support, and requests for such data are not permitted. Contractual obligations are enforced through numerous FAR and DFARS clauses including 52.222-50 on combating trafficking in persons, 52.223-3 on hazardous material identification, 252.204-7012 on safeguarding covered defense information and cyber incident reporting, 252.240-7997 on NIST SP 800-171 compliance, and 252.223-7001 requiring hazard labels and pre-award submission of Safety Data Sheets. Invoicing must be processed electronically through Wide Area WorkFlow (WAWF), and payment is governed by DoDAAC routing codes not specified in the solicitation. Contractors must hold a valid UEI and CAGE code, and must accurately represent their small business status under socioeconomic programs such as WOSB, SDVOSB, HUBZone, and SDB, with misrepresentation subject to penalties under 15 U.S.C. 645(d). Offerors respond via DIBBS with completed

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

COLD FOOD COUNTER, MThe contract specifies the procurement of one mechanically refrigerated cold food counter, identified by NSN 7310-01-077-6500 and part number AA-59190-111, under solicitation SPE3SE-26-T-1062. Delivery is required within 20 days, FOB destination, with no variance allowed in quantity. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including use of EPA-approved refrigerant substitutes—specifically excluding Class I ozone-depleting substances such as HCFC-22, and permitting only R-134A or other approved alternatives. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all items must be marked and labeled accordingly. The shipment must be sent via traceable freight methods, not parcel post, to the designated delivery point in Greenville, Kentucky. Technical data packages are available during the open solicitation period and include drawings referenced to CID A-A-59190, QAP 14153, and drawing number 81337 5-13-2177, all updated as of early 2024. The requirement is part of a DoD acquisition under NAICS code 333241, managed by the Subsistence FSE Supply Chain, with primary point of contact Khuong Nguyen. All supplies must be free of government identification prior to delivery and are subject to inspection and acceptance at the destination.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

COLD FOOD COUNTER, MThe contract is for a single Cold Food Counter, Model M, identified by NSN 7310-01-391-3376, with a delivery requirement of 20 days after award. The solicitation, numbered SPE3SE-26-T-1063, was posted on July 26, 2026, with responses due by July 30, 2026, and falls under NAICS code 333241 for commercial and industrial machinery and equipment manufacturing. Performance is designated for Pearl Harbor, HI, with Joseph Pineiro serving as the primary point of contact for inquiries. The item is subject to DLA packaging requirements and technical specifications referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The procurement prohibits the intentional use of ozone-depleting substances and mercury or mercury-containing compounds in or on the supply, except for specific permitted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Defense information may apply, and no technical data package is currently approved by DLA Troop Support for this NSN. The item is approved by NSU/NAVSEA, and no submissions to DLA’s technical data support team should be made.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

MIXING MACHINE, FOODThe contract is for the procurement of one food mixing machine, identified by NSN 7320-01-619-8104 and part number 651-7066840-014, to be delivered to the USS Montana SSN 794 at FPO AP 96695. Delivery is required within 20 days of contract award, with FOB destination terms, and no tolerance for quantity variance. The item must comply strictly with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging guidelines, including proper palletization, labeling, and marking. Mercury and mercury-containing compounds are strictly prohibited in direct contact with the equipment, except for specific exempted applications like batteries or calibrated instruments under NAVSEA 5100-003D, with portable devices requiring dual containment. All shipments must follow DLA procedures C19 and C20 for transportation and first destination handling. The contract was issued under solicitation SPE3SE-26-T-1058 by the Department of Defense’s Subsistence FSE Supply Chain, with a required delivery date of July 27, 2026, and the primary point of contact is Ellina Entin.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

in about 7 hours

Kitchen EquipmentThe 409th Contracting Command plans to solicit a Firm Fixed Price contract for the procurement and installation of commercial-grade kitchen equipment at USAG Grafenwoehr and Hohenfels training areas in Germany, with delivery and installation obligations finalized at the destination in Grafenwoehr. The equipment includes conveyor toasters, ice cube makers, hot food serving counters, warming cabinets, flat top grills, pan frying and braising units, beverage fridges, and water filters combined with coffee urns, all classified as cafeteria-grade appliances. The solicitation will be conducted on an unrestricted basis under FAR Part 12 commercial items procedures and will use a Low Priced Technically Acceptable evaluation method to select the winning offer. The solicitation number is W912PB-26-Q-A107, with a response deadline of August 10, 2026, and the presolicitation notice was posted on July 23, 2026, indicating the government’s intent to issue the full solicitation before August 15, 2026, though it retains the right to delay or cancel the process at any time prior to award. The North American Industry Classification System code is 333241, and the contracting office is located in APO AE 09114, with primary and secondary points of contact provided for inquiries.

0409 Aq Hq Contract

POSTED

DEADLINE

7320--Delivery and Storage CabinetsThe contract solicitation 36C26226Q1160 seeks the procurement of Delivery and Storage Cabinets under the NAICS code 333241, with full and open competition permitted under the Revolutionary FAR Overhaul Part 12, allowing for brand name or equal and open market offerings. Contractors must demonstrate through clear and compelling evidence their capacity to meet all requirements specified in Sections B.2 and B.3 of the solicitation. Award will be determined based on the Addendum to FAR 52.212-1 and FAR 52.212-2, which govern the evaluation of commercial products and services. All responses must be submitted no later than Thursday, July 30, 2026, at 5:00 PM. The contract is managed by the 262-NETWORK Contract Office 22 under the Department of Veterans Affairs, with the primary point of contact being Contract Specialist Sam Choo at sam.choo@va.gov. The office is located in Gilbert, Arizona, while performance is required in Tucson, Arizona, with an associated zip code of 85723.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

7320 DRESSERThe U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting commercial galley dressers under a total small business set-aside, identified by solicitation N0040626Q0392, with responses due by August 4, 2026, and an anticipated award in August 2026. The requirement encompasses three specific dresser items: one measuring 14” W x 35” D x 42” H fabricated from steel alloy per DWG 611-8976165; one measuring 9’-0” W x 32” D x 34-1/2” H (including 21-1/2” legs) made of corrosion-resistant steel (CRES) per DWG 611-8976170; and another measuring 58-1/2” W x 30” D x 34-1/2” H (including legs) also in CRES, with all legs required to comply with DWG 804-6983471 Detail 69-C. All items must be uniquely identified with a 2D Data Matrix barcode per MIL-STD-130 and registered in the DoD IUID Registry, with packaging and marking strictly conforming to ASTM-D-3951, including heat-treated wood packaging compliant with APHIS standards. Delivery is FOB Origin, with final destination being SRF and JRMC Yokosuka, Japan, and all items must be delivered no later than November 6, 2026. The solicitation is classified as a commercial item acquisition under FAR Part 12, with a firm fixed-price contract structure, and offers will be evaluated based on technical compliance (including delivery date), price, and past performance without hierarchical weighting, allowing for trade-offs among these factors. Drawings and technical guidance information are not included in the solicitation and may only be accessed by qualified respondents registered in the Joint Certification Program, who must submit their CAGE code and DD-2345 to retrieve them. All bidders must maintain active registration in SAM.gov, and compliance with numerous FAR and DFARS clauses is required, including prohibitions on inverted domestic corporations, trafficking in persons, use of materials from Xinjiang, subcontractor oversight, and safeguarding defense information. Invoices must be submitted via Wide Area WorkFlow, and

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Secure Transportation and Delivery to FPO AddressThe contract entails the secure transportation and delivery of hazardous polyurethane coating to the military postal address FPO AP 96607, with the contractor assuming full financial and operational responsibility for the shipment from origin to final destination. This includes compliance with all applicable safety, handling, and regulatory standards for hazardous materials, as well as bearing all costs and risks associated with transit, including potential delays, damage, or loss. The work falls under NAICS code 484220, classifying it as a specialized truck transportation service, and is issued as a subcontract through the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 26, 2026, with responses required by August 3, 2026, and performance is required at the specified FPO location with zip code 96607.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, labeling, and marking services for polyurethane coating in full compliance with MIL-STD specifications, as it is classified as a hazardous material. The work must adhere to all military standards for handling, containment, and identification to ensure safe transportation and storage within defense supply chains. This subcontract is issued by the Defense Logistics Agency under the Department of Defense, with performance required at the FPO address with ZIP code 96607. The NAICS code 561910 indicates the scope falls under other support services for waste management and remediation, reflecting the specialized nature of hazardous material handling. Bidders must submit proposals by the deadline of August 3, 2026, and are expected to demonstrate capability in meeting strict military regulatory requirements for hazardous materials. The solicitation, accessible via the provided DIBBS link, targets qualified subcontractors with proven experience in military-compliant packaging systems. While no set-aside type is specified, the contract supports the Department of Defense’s logistical needs and demands precise adherence to federal and military documentation, labeling, and safety protocols throughout the entire packaging lifecycle.

Packaging and Labeling Services

POSTED

DEADLINE

Qualified Polyurethane Coating Manufacturer (QPL-Approved)The contract requires the manufacture and supply of 187 units of a qualified polyurethane coating that meets military specifications for NSN 8010016525908, with the product required to be QPL-approved to ensure compliance with defense standards. The work is classified as a subcontract under NAICS code 325510 and is being managed by the Defense Logistics Agency under the Department of Defense, with performance expected to take place at an FPO address with the ZIP code 96607. The solicitation was posted on July 26, 2026, and responses must be submitted by August 3, 2026, indicating a short window for proposal submission. The contract is not subject to a specific set-aside classification, and the primary requirement centers on delivering a certified coating that aligns with established military quality and performance benchmarks for logistical use.

Paint and Coating Manufacturing

POSTED

DEADLINE

Government Bill of Lading and WAWF Invoicing SupportThe contract encompasses the preparation and management of shipping documentation and invoicing through the Wide Area Workflow system, with particular emphasis on compliance with DFARS Appendix F requirements for receiving reports. This support work is critical to ensuring accurate, timely, and audit-compliant documentation for defense logistics operations, specifically tied to government shipments processed under the Defense Logistics Agency. All invoicing and documentation must be fully integrated with WAWF procedures to meet federal contracting standards and facilitate seamless receipt and payment processes. The contract is structured as a subcontract with a North American Industry Classification System code of 541214, indicating professional, scientific, and technical services related to accounting, bookkeeping, and billing. Performance is required at FPO, zip code 96616, consistent with military logistics and overseas supply chain needs. The solicitation was posted on July 26, 2026, with a firm response deadline of August 6, 2026, allowing potential vendors a limited window to submit proposals. The contracting authority is the Department of Defense, under the Defense Logistics Agency, underscoring the critical and high-stakes nature of the services required.

Payroll Services

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires compliance with military standards for the packaging, labeling, and preparation of condensing units for shipment, encompassing palletization, preservation techniques, and proper marking to ensure safe transportation and handling. All work must conform to applicable defense specifications to guarantee readiness and durability under operational conditions. The place of performance is designated as FPO with a zip code of 96616, indicating a military mail destination, and the NAICS code 493190 classifies this as other warehousing and storage services under the Department of Defense. This is a subcontract opportunity issued by the Defense Logistics Agency, with bids required by August 6, 2026, and the solicitation was posted on July 26, 2026. No set-aside designations or specific organizational requirements are specified, and the exact point of contact details are not provided in the posting.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the preparation and submission of Safety Data Sheets for all hazardous materials linked to a condensing unit or its components before the award is finalized. This obligation is critical to ensuring regulatory compliance and the safe handling, storage, and transport of hazardous substances throughout the supply chain. The work must be completed and delivered by the response deadline of August 6, 2026, under a subcontract structure governed by the Defense Logistics Agency within the Department of Defense. Performance is designated to occur at FPO, ZIP 96616, aligning with military logistics operations. The North American Industry Classification System code 541690 indicates this is a professional, scientific, and technical service category, specifically under other scientific and technical consulting services, suggesting the need for specialized expertise in chemical compliance and documentation. There is no set-aside designation, meaning all qualified entities may bid regardless of business size or owner demographics. The solicitation is open for response until the deadline, and failure to submit complete and accurate SDS documentation prior to award could result in disqualification or contract non-compliance. All submissions must meet federal and international standards for hazardous material identification and safety disclosure.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Refrigeration Equipment Supply (Condensing Unit)The contract specifies the supply of a single military-specification condensing unit identified by NSN 4130014795974 for installation aboard the USS RONALD REAGAN CVN 76. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a solicitation identifier of SPE8E826T4847. The equipment is intended for critical cooling systems aboard the aircraft carrier and must meet rigorous military standards to ensure operational reliability in demanding maritime environments. Performance is required at FPO 96616, indicating delivery to a naval vessel at sea or in a designated military logistics location. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, allowing a limited window for qualified vendors to submit proposals. The North American Industry Classification System code 333414 categorizes this as industrial and commercial ventilation and air conditioning equipment manufacturing, underscoring the technical specificity required. No set-aside status is indicated, meaning any eligible contractor may respond. The contract does not list a point of contact, suggesting procurement is handled through standardized DLA procedures. Delivery of this unit is time-sensitive and mission-critical, as it supports core shipboard climate control infrastructure necessary for crew safety, electronics operation, and mission readiness.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE

Packaging, Marking, and Palletization ServicesThe contract requires full compliance with MIL-STD-2073-1E and DLA RP001 standards for the packaging, preservation, palletization, and marking of military equipment and supplies, ensuring all procedures meet strict defense logistics requirements. This includes the application of data matrix barcodes for accurate traceability and the exclusive use of non-plastic dunnage materials to uphold environmental and operational integrity. All identification markers must be properly affixed and legible, and packaging must withstand rigorous handling and storage conditions typical of military supply chains. The work is to be performed at Fort Hood, Texas, with a response deadline of August 6, 2026, and is structured as a subcontract under NAICS code 423830. The Defense Logistics Agency, part of the Department of Defense, is issuing this solicitation to secure qualified contractors capable of delivering defense-compliant packaging solutions. There is no designated set-aside status, and bidders must be prepared to meet all technical and regulatory specifications without exception, with full accountability for adherence to federal military standards.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Hazardous Materials Compliance & LabelingThe contract entails the development and submission of hazard warning labels and Material Safety Data Sheets (MSDS) to ensure full compliance with OSHA’s Hazard Communication Standard and DFARS requirements. This work supports the safe handling, storage, and transportation of hazardous materials within defense-related operations, requiring precise adherence to federal safety and regulatory protocols. The deliverables must accurately reflect chemical hazards, protective measures, and emergency procedures as mandated by current regulatory frameworks. The opportunity is issued as a subcontract under the NAICS code 541690 and is managed by the Defense Logistics Agency within the Department of Defense. Performance is located at Fort Hood, Texas, with a zip code of 76544-5060. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. All submissions must meet strict compliance benchmarks to support DLA’s mission of maintaining safety and regulatory integrity across military supply chains.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Manufacturing of Identification MarkersThe contract calls for the manufacture of 15 units of Type I Identification Markers designated by NSN 7690-01-279-7613 and part number Z-PSR3, with strict adherence to military-grade specifications for shelf-life, durability, and material composition. These markers are intended for use in defense applications where long-term reliability and environmental resistance are critical. The work is to be performed at Fort Hood, Texas, with a zip code of 76544-5060 as the designated place of performance. The solicitation is classified as a subcontract under NAICS code 323117, indicating it falls within the printing and related support activities sector. The Defense Logistics Agency, operating under the Department of Defense, is the contracting organization responsible for this requirement. Proposals must be submitted by August 6, 2026, with the opportunity posted on July 26, 2026, providing a 12-day window for responses.

POSTED

DEADLINE

Supply of FIR Sensing Element (NSN 6350375306236)The contract entails the supply of ten units of a Forward Looking Infrared (FIR) sensing element identified by National Stock Number 6350375306236, manufactured to meet stringent military specifications and packaging standards. The deliverables must comply with all applicable labeling requirements and cybersecurity protocols to ensure operational integrity and information security. Delivery is specified under FOB destination terms, meaning the seller assumes all costs and risks until the items reach the designated delivery point. The place of performance is listed as FPO with ZIP code 09595, indicating delivery to a military post office location, typically serving deployed or overseas military units. This is a subcontract solicitation issued by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 335311 for electronic component manufacturing. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026. bidders must ensure full adherence to technical, logistical, and regulatory criteria outlined in the military requirements, as noncompliance may result in disqualification or contract failure. The contract is accessible via the DIBBS platform, and all proposals must be submitted through the official portal prior to the deadline.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Packaging and Palletization Services (Supplier Support)The contract requires compliant packaging, cleaning, and drying of equipment in accordance with MIL-STD-2073-1E and DLA RP001 standards, followed by proper palletization for shipment to the shipyard in Bremerton, Washington, 98314-5001. All work must meet rigorous defense logistics requirements to ensure product integrity during transit and storage, with final delivery targeted to support naval operations. The effort is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 423820 for wholesale trade of machinery and equipment. Respondents must submit proposals by August 6, 2026, with the solicitation posted on July 26, 2026. The project involves end-to-end handling of sensitive military assets, demanding strict adherence to technical specifications for material preparation, environmental controls during cleaning and drying, and secure, standardized pallet configurations. No set-aside designation is specified, indicating open competition for qualified suppliers capable of meeting federal defense packaging protocols and delivering to the designated shipyard location.

Farm and Garden Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE