Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Commercial Shipping Container Supply and Packing

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply and packing of unit containers into commercial-grade corrugated shipping containers designed for safe and cost-effective transport, specifically supporting logistics operations for the Department of Defense under the Medical Supply Chain FSH. This subcontract opportunity, solicited under NAICS code 322220 which corresponds to corrugated and solid fiber box manufacturing, requires vendors to ensure all packaging meets rigorous standards for durability and protection during transit. The place of performance is designated as Travis Air Force Base with a ZIP code of 94535-1825, indicating that all activities including packing and preparation must be conducted in close proximity to this military installation. Proposals must be submitted by the deadline of August 10, 2026, with the solicitation posted on August 2, 2026, allowing a limited window for interested parties to prepare and respond. The task focuses on supply chain efficiency and operational readiness, emphasizing compliance with defense logistics protocols for medical supply distribution.

General Info

Supply and pack medical units in corrugated containers at Travis AFB for DoD logistics by August 10, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

322220 - Paper Bag and Coated and Treated Paper ManufacturingView NAICS

Place of Performance

TRAVIS AFB, CA, 94535-1825, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and pack unit containers into commercial-grade corrugated shipping containers for safe and cost-effective transport.

Similar Contracts

Same NAICS industry code

Sustainable Products SourcingThe contract titled Sustainable Products Sourcing requires the procurement and supply of environmentally sustainable packaging materials, including recyclable and biodegradable containers, in full alignment with federal environmental and sustainability directives, particularly Executive Order 14057. The work is intended to support the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, with performance occurring at Fort Campbell, Tennessee, ZIP 42223-5349. The NAICS code 322220 specifies the industry classification for paper product manufacturing, indicating that the materials must be produced through sustainable paper-based processes. This subcontract opportunity is open for responses until August 10, 2026, with the solicitation posted on August 2, 2026, and all suppliers must ensure their offerings meet rigorous compliance standards for ecological impact, end-of-life disposal, and reduction of synthetic plastic use.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous Material Packaging and Preservation ServicesThe contract seeks commercial-grade packaging services for hazardous and medical materials adhering to MIL-STD-2073-1E standards, requiring unit containers, cushioning, and preservation methods designed to maintain integrity over a 48-month shelf life under temperature conditions ranging from +10.0°C to 30.0°C. The packaging must ensure safe handling, storage, and transport of sensitive materials while meeting all military specification requirements for durability, contamination control, and environmental resilience. This subcontract opportunity, issued under NAICS code 322220 by the Department of Defense through the Medical Supply Chain FSH, is open for responses until August 10, 2026, with the solicitation posted on August 2, 2026. The place of performance and point of contact details are not specified, but the work is expected to support critical defense medical logistics. Interested vendors must comply fully with the technical and procedural standards outlined in MIL-STD-2073-1E and demonstrate capacity to deliver consistent, certified packaging solutions across the contract term.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Cushioning and Dunnage Material SupplyThe contract calls for the supply of cushioning and dunnage materials conforming to specification A-A-59136, Class 1, Grade B, with precise requirements for density and thickness to ensure adequate protection of components during handling and transport. The materials must meet strict performance standards to safeguard sensitive equipment, and the delivery must align with the defined technical parameters outlined in the specification. This is a subcontract under the North American Industry Classification System code 322220, indicating involvement in paper product manufacturing, likely for industrial packaging applications. The contract is issued by the Active Devices Division of the Department of Defense, with performance required at Columbus, Ohio, zip code 43213. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, giving potential vendors a window of eleven days to submit proposals. The contract is accessible via the DIBBS portal, and while no point of contact or set-aside details are provided, the involvement of a Defense Department component underscores the critical nature of the materials for military or defense-related applications.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-26-T-3951

The contract calls for the procurement of 1 unit of identification markers, part number L-8 or HML8, manufactured by LabelMaster Co or American Labelmark Company, with each unit consisting of 500 markers per RO and measuring 1,666 feet per RO. These are classified as Type I items with a non-extendable 12-month shelf life, requiring at least 85% of that shelf life to remain at delivery. Expiration dates must be clearly marked in calendar quarter and year format, exactly one year from the cure date, in full compliance with MIL-STD-129, including the special marking code 32 for Type I shelf life items. Packaging must adhere to MIL-STD-2073-1E, with plastic wrapping, cushioning, or dunnage avoided where possible, and all marking requirements strictly followed. Delivery is due within five days of contract award, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at destination. The item is designated by NSN 7690-01-241-6603 and is to be delivered to the U.S. military installation at Wackernheim Mainz, Germany. The sole requirement is for one RO, with a required delivery date of July 30, 2026, and the contract reference number is SPE8E6-26-T-3951. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA website, and the applicable revision is determined based on the solicitation issue date.

Defense Logistics Agency

POSTED

DEADLINE

Sustainable Packaging Supply & DesignThe contract requires the supply and design of sustainable packaging materials to safely transport a heavy-duty metal dog crate, eliminating all use of Styrofoam and non-recyclable plastics. The solution must ensure secure shipping while adhering to environmental standards, prioritizing recyclable and biodegradable components that maintain structural integrity under the weight and rigors of transit. The packaging will be evaluated for durability, efficiency, and full compliance with sustainability requirements, replacing conventional non-eco-friendly alternatives. This is a subcontract under NAICS code 322220, issued by the Maryland Police Department with a response deadline of August 12, 2026. The procurement is open to qualified vendors capable of delivering tested, scalable packaging systems that meet functional and ecological benchmarks without relying on prohibited materials. All proposals must demonstrate proven expertise in sustainable packaging innovation and provide evidence of materials’ end-of-life recyclability or biodegradability in standard waste streams. The project is active through the Baltimore County procurement portal, and interested parties are expected to submit comprehensive technical and commercial offerings by the specified cutoff.

Police Department

POSTED

DEADLINE

Supply of Stabilization Process Copying Paper (NSN 6750014431166)The contract involves the supply of a single unit of specialized copying paper designated for use in stabilization processes, fully compliant with the National Stock Number NSN 6750014431166. This item must be packaged and shipped FOB destination to a U.S. military installation located in Germany, ensuring delivery to the designated point without additional cost or responsibility to the recipient. The procurement is classified as a subcontract under the NAICS code 322220, which corresponds to the paper and paperboard mills industry, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 31, 2026, and the transaction is linked through the DIBBS system, indicating official federal procurement channels were used to assign the award.

Defense Logistics Agency

POSTED

DEADLINE

Environmental & Sustainable Procurement ComplianceThe contract entails the supply of postconsumer fiber content paper and double-sided printing services to ensure compliance with FAR 52.204-4 sustainable procurement standards, emphasizing environmentally responsible practices within federal operations. The materials and services must meet specific criteria for recycled content and energy-efficient printing methodologies to support the Department of Defense’s broader sustainability goals. The work is classified under NAICS code 322220, indicating its focus on paper manufacturing and related services, and is structured as a subcontract under the Defense Logistics Agency. Performance is expected to align with federal mandates requiring reduced environmental impact through the use of recycled materials and minimization of waste during document production. The contract was posted on July 31, 2026, and is tied to the procurement vehicle SPE7LX21D0087 with delivery order SPE7LX26FB99D, ensuring adherence to standardized acquisition protocols. While no specific place of performance or point of contact is listed, the scope is clearly centered on delivering compliant, sustainable printing solutions to federal agencies.

Defense Logistics Agency

POSTED

DEADLINE

Printer Paper Supply and DeliveryThe contract is for the supply and delivery of printer paper that meets DLA specification RA001, with packaging requirements defined by RP001 and labeling compliant with MIL-STD-129. All deliveries are made FOB origin, meaning title and risk transfer to the buyer at the point of shipment, with acceptance occurring at the destination. The solicitation is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, and aligns with NAICS code 322220 for paper manufacturing. The offering is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance directed to APO, ZIP 09803. Responses must be submitted by August 7, 2026, following the posting of the solicitation on July 30, 2026, through the DIBBS platform.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Non-Hazardous Materials Packaging and PreservationThe contract requires the provision of packaging, preservation, and marking services for non-hazardous military supplies in strict compliance with DLA RP001 and MIL-STD-2073-1E standards, ensuring all procedures meet defense logistics requirements. All materials and methods must be approved and certified, with explicit prohibition against the use of mercury-containing components unless specific authorization is granted. Work must be performed to maintain the integrity, longevity, and traceability of supplies throughout storage and transport, adhering to standardized labeling and protective techniques defined by federal military packaging regulations. The solicitation is classified as a subcontract under NAICS code 322220, with a response deadline of August 7, 2026, and a posted date of July 30, 2026. Performance is required at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity falls under the Department of Defense through the Land Supplier Ops Engines organization. Contractors must be prepared to meet all technical, logistical, and compliance obligations without deviation, as failure to adhere to specified standards could result in rejection of deliverables or contract termination.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Protective Packaging and Sealing ServicesThe contract pertains to the design and execution of protective packaging solutions aimed at safeguarding sensitive medical and surgical supplies during transit. The work involves the integration of desiccants, vapor corrosion inhibitors, cushioning materials, and dunnage to maintain product integrity under varying environmental conditions, ensuring components arrive in operational condition. The packaging systems must be engineered to meet stringent military and medical standards, with a focus on durability, moisture control, and corrosion prevention for long-term storage and transportation. The contract is classified as a subcontract under NAICS code 322220, which relates to paperboard container manufacturing, indicating a focus on customized packaging production rather than general logistics. Performance is required to occur in San Antonio, Texas, with a response deadline of August 5, 2026, and the solicitation was posted on July 30, 2026, under the Department of Defense’s Medical Supply Chain for Surgical and Field Support. The contracting activity falls under the Defense Logistics Agency’s DIBBS platform, and the entity must possess the technical capability to deliver packaging systems that comply with defense supply chain requirements for sensitive medical equipment and supplies.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Commercial Packaging and Sealed Unit Container SupplyThe contract calls for the supply of interior sealed containers and exterior commercial shipping boxes designed specifically to safeguard stools during transit via common carrier, ensuring protection from damage, moisture, and environmental exposure throughout the supply chain. The packaging must meet commercial shipping standards and be compatible with standardized logistics handling procedures, with the place of performance identified as APO 09227-0000, indicating delivery to military addresses overseas. This is a subcontract under NAICS code 322220, relating to paperboard container manufacturing, issued by the Department of Defense through the Medical Supply Chain FSH office. The solicitation was posted on July 30, 2026, with responses required by August 6, 2026, and is aimed at securing reliable packaging solutions to support the secure and efficient transportation of medical equipment or supplies. Bidders must demonstrate capacity to deliver compliant packaging in required volumes without specifying set-aside provisions for small or disadvantaged businesses.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of UV-Protective Packaging MaterialsThe contract calls for the supply of specialized waterproof, greaseproof, and opaque bags that meet MIL-DTL-117, Type II, Class C, Style 1 specifications, designed to protect UV-sensitive components housed in military kits. These packaging materials must provide complete light barrier properties to ensure the integrity of sensitive components during storage and transport under diverse environmental conditions. The requirements are strictly defined by military standards, mandating precise material composition, structural durability, and shielding effectiveness to prevent degradation from ultraviolet exposure. This is a small business set-aside subcontract under NAICS code 322220, exclusively available to total small business concerns as defined by the SBA. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026. Performance of the contract is centered in Tracy, California, with a zip code of 95304-5000, though exact delivery coordination is not detailed. The contracting activity is managed by the Strategic Acquisition Program Directorate within the Department of Defense, and interested vendors must submit responses through the designated DIBBS platform using the reference number SPE7LX26T0836.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

DISPOSAL CONTAINER,

Solicitation # SPE2DH-26-T-5737

The contract is for the procurement of 35 disposal containers designed specifically for the safe handling and disposal of hypodermic needles and syringes. Each container measures between six and seven inches in length and one to two inches in diameter, featuring a securable cap and a lift-off cover to ensure containment and prevent accidental exposure. The product must comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is identified by NSN 6530-01-645-6923 and is subject to controls related to covered defense information. The solicitation was issued under number SPE2DH-26-T-5737, with responses due by August 10, 2026, and delivery required within 20 days of award to Fort Bragg, North Carolina, 28310. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE2DH-26-T-5738

The contract is for a single unit of a heavy-duty plastic cardiac board measuring 15 1/2 inches by 21 1/2 inches by 3/4 inch, identified by NSN 6530-01-716-9177, to be delivered within five days of award. All packaging and packing must comply with commercial standards as specified in the procurement document, requiring each unit to be sealed in a container that protects against damage or breakage and shipped in exterior containers suitable for safe transit by common carrier at the lowest possible cost to Joint Base Charleston, South Carolina. All markings must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date. The solicitation, issued under number SPE2DH-26-T-5738, was posted on August 3, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE2DH-26-T-5736

The contract specifies the procurement of litmus paper in a commercial packaging configuration, with each unit individually sealed in foil packets and packaged in groups of 30 per page, designated as one unit of issue. All packaging must meet stringent commercial standards to ensure protection against damage and breakage during transit, with exterior shipping containers suitable for safe delivery by common carriers at the lowest cost to the specified delivery point. The product must comply with the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all labels must clearly display the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The material must have an 18-month shelf life, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Additionally, each foil packet features a color chart for pH indication, and bidders are required to identify the specific source and part number being offered. The item is governed under solicitation SPE2DH-26-T-5736, with a response deadline of August 10, 2026, and delivery required within 20 days of award. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contract also includes provisions for the removal of government identification from non-accepted supplies, while covered defense information may apply.

All Other Industrial Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

DENTAL UNIGRIP SCRE

Solicitation # SPE2DH-26-T-5743

The contract pertains to the procurement of two Dental Unigrip Screwdrivers, each 25mm in length, designed for aesthetic dental applications and identified by the NSN 6520-01-518-1009. The solicitation number is SPE2DH-26-T-5743, with a response deadline of August 10, 2026, and a required delivery within 20 days of award. Bidders must specify the source and part number being supplied, and all supplies must comply with DLA packaging requirements and the removal of government identification from non-accepted items. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Covered defense information provisions apply, and the items are to be delivered to Newport, Rhode Island, under the oversight of the Department of Defense’s Medical Supply Chain FSH. Point of contact is Tina Vu, reachable via email and phone provided.

Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

SLEEVE, CURING LI T

Solicitation # SPE2DH-26-T-5740

The contract is for the procurement of 10 packages of disposable barrier sleeves designed to fit directly over the Valo Grand curing light used in dental applications. Each package contains 100 sleeves, totaling 1,000 units, and they are intended to prevent the buildup of germs and bacteria by acting as a single-use protective barrier. The product is identified by the NSN/Part Number 6520-01-730-0057 and is being procured under solicitation SPE2DH-26-T-5740, with a response deadline of August 10, 2026, and a required delivery within 20 days after award. The solicitation incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and the supplier must specify the source and part number being offered. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Covered defense information may apply, and the contract falls under NAICS code 339114. Delivery is to Peterson AFB, Colorado, with point of contact Tina Vu at the Defense Logistics Agency.

Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

DRAPE, SURGICAL

Solicitation # SPE2DH-26-T-5739

The contract specifies the procurement of a small surgical drape made of transparent, disposable, sterile plastic measuring 1¼ by 17⅜ inches with an adhesive area protected by a liner, intended for general surgical use. Each unit must be individually sealed in a suitable container that safeguards against damage or breakage, and all units must be packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate to the designated point of delivery, which is Offutt AFB, zip 68113-1044. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all items must be marked accordingly. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item is identified by NSN 6530-01-047-9697 with a quantity of one pack, and delivery is required within five days of award. The solicitation number is SPE2DH-26-T-5739, issued by the Department of Defense’s Medical Supply Chain FSH, with bids due by August 10, 2026, and point of contact established as Tina Vu.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

BAG, STERILIZATION-BIOH

Solicitation # SPE2DH-26-T-5734

The contract is for the procurement of heavy-duty, puncture-resistant sterilization biohazard disposal bags in red or orange coloration to indicate contamination, designed specifically for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package of 200 units, and the product must meet strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to commercial standards, with each unit sealed in a container that protects against damage and be packed in suitable exterior shipping containers to ensure safe, cost-effective delivery by common carriers to the contract-specified destination. All packaging and marking must comply with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and must not include government identification on non-accepted supplies. The product is sourced from approved suppliers including MeDeGen Medical Products, LLC and Baxter Healthcare Corp., with the NSN 6530-01-078-0365 and part numbers specified. Delivery is required FOB destination in 105 days with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract, issued under solicitation SPE2DH-26-T-5734, follows DLA’s standard procedures, and the unit of issue is consistent with DoD and ANSI X12 guidelines.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

GLASS IONOMER RESTORAT

Solicitation # SPE2DH-26-T-5742

The contract is for the procurement of 2 packages of GC Fuji Triage Capsule, a pink glass ionomer restorative dental material, with each package containing 50 capsules. The item is identified by NSN 6520-01-655-3423 and has a strict 36-month non-extendable shelf life per RS020 requirements. Packaging must conform to DLA standards and hazardous materials regulations including SPE2DH-26-T-5742, 49 CFR, and ICAO Technical Instructions. A current Material Safety Data Sheet (MSDS) is mandatory and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL along with the required cover sheet. The item is subject to hazardous communication standards and requires removal of government identification from non-accepted supplies. The solicitation number is SPE2DH-26-T-5742, issued under the NAICS code 339114 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 10, 2026, and delivery required within five days of award to Suffolk, Virginia, 23435-5000. Point of contact is Tina Vu, reachable via email and phone.

Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

CHIP, CHEMICAL, AMMON

Solicitation # SPE2DH-26-T-5735

The contract specifies the procurement of a chemical chip designed for ammonia detection, with a measurement range of 2.0 to 50.0 ppm, and is part of a diagnostic system that utilizes ten capillary channels filled with substance-specific reagents to eliminate cross-sensitivity and ensure accurate readings. Each chip is manufactured with integrated gas type, part number, and batch number printed directly on the device, and is calibrated during production with a validity period of two years. The end item is identified by NSN 6640-01-497-5784, with a unit of issue as each, and must have a minimum shelf life of 24 months, with no more than four months having elapsed from the date of manufacture to the date of delivery to the government. Packaging and marking must comply strictly with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be sealed in suitable containers that protect against damage and ensure safe, cost-effective delivery via common carrier to the designated delivery point in APO, 96260-5479. Labels must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number, and bidders must clearly identify the source and part number being offered. The solicitation is issued under SPE2DH-26-T-5735, with a response deadline of August 10, 2026, and is subject to DLA’s Master List of Technical and Quality Requirements, with packaging and documentation requirements binding under Federal acquisition guidelines applicable to medical procurements.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

STAND, PLUGGER TIP

Solicitation # SPE2DH-26-T-5744

The item specified is a Stand, Plugger Tip designed to hold up to six pluggers for use with Heat Carrier endodontic units, used in dental procedures. It is classified under NSN 6520-01-556-1436 with a quantity of four units required, and delivery is mandated within 20 days of award. The contract is issued under solicitation number SPE2DH-26-T-5744, with bids due by August 10, 2026, and the NAICS code 333310 applies to this medical equipment procurement by the Department of Defense’s Medical Supply Chain FSH. The solicitation incorporates technical and quality requirements from the DLA Master List, applicable based on the solicitation or award date depending on acquisition size, and includes packaging requirements per RP001, mandates removal of government identification from non-accepted supplies under RQ011, and indicates potential application of Covered Defense Information under RD003. Bidders must clearly state the source and part number being supplied. All offers must be submitted through the DIBBS platform with primary point of contact Tina Vu at DLA, reachable via email and phone provided.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

VIAL, SCREW TOP, MULT

Solicitation # SPE2DH-26-T-5741

The contract specifies the procurement of 40 mL clear glass vials with screw-top closures and phenolic hole caps, identified by NSN 6640-01-509-4802, in a unit of issue of 100 pieces per package. Each vial measures 29 mm in outer diameter and 82 mm in height, and the total quantity requested is two packages, requiring delivery within 20 days after order. The vials must comply with DLA Packaging Requirements for Procurement and incorporate technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DH-26-T-5741, was posted on August 3, 2026, with a response deadline of August 10, 2026, and falls under NAICS code 333998. The procurement is managed by the Medical Supply Chain FSH within the Department of Defense, with performance required at Moody AFB, Georgia, and primary point of contact being Tina Vu via email and phone for inquiries.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

CT Phantom Scanner Supply and DeliveryThe contract requires the supply and delivery of one Phantom Computed Tomography Scanner with a 50-slice thickness, identified by NSN 6525-01-701-0733, to Fort Bragg, North Carolina, within five days of award. The item must be shipped in full compliance with federal packaging and labeling regulations, and transportation must be conducted via a U.S.-flag vessel as mandated by law. Delivery is time-sensitive, with strict adherence to the five-day window critical to fulfill contractual obligations. The procurement is categorized as a subcontract under NAICS code 423450 and is administered by the Department of Defense through the Medical Supply Chain FSH office, with performance location confirmed at Fort Bragg, ZIP 28310. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE