Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Commissioning Services for Building Systems

Active

International

Response Deadline09/23/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Research Council of Canada is seeking a subcontractor to provide commissioning services for building systems. The scope of work involves the independent verification and documentation of mechanical, electrical, and control systems performance, which includes the development of commissioning plans, detailed reporting, and the provision of staff training. This opportunity is categorized under NAICS code 541330 and is being managed by the Government of Canada. The solicitation was posted on August 13, 2026, with a response deadline set for September 23, 2026. Performance of the contract will take place within Canada.

General Info

NRC seeks subcontractor for building systems commissioning services in Canada by September 23.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

This scope was carved out of 26-58067.

The full solicitation package (12 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

M50 Building - Canadian Photonics Fabrication Centre (CPFC) and Quantum and Nanotechnology (QN) Semiconductor Facility Project - Construction Management Services

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 13

subcontract

Response DeadlineSep 23

Submission deadline

Response Deadline

09/23/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent verification and documentation of mechanical, electrical, and control systems performance, including commissioning plans, reports, and staff training.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for the Elsinore Valley Municipal Water District in Riverside County, California. The project seeks firms specializing in engineering, environmental services, surveying, geotechnical analysis, permitting, public outreach, and utility location. This opportunity is specifically targeted toward Disadvantaged, Small, Women-Owned, and Minority-Owned Business Enterprises, as well as other certified SBA entities. Interested firms must coordinate with Charlie Brown to submit a qualifications package and obtain solicitation documents. While initial contact is requested by August 7, 2026, the final response deadline for the solicitation is September 15, 2026. Relevant NAICS codes for this professional services contract include 541330 and several other specialized industry classifications.

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals for the Corydon Well Replacement Project (Work Order C2305) on behalf of the Elsinore Valley Municipal Water District in California. This professional services agreement seeks qualified firms, specifically targeting Disadvantaged Business Enterprises (DBE) and other small business set-asides, to provide comprehensive design, bidding support, and engineering services during construction. The scope is divided into two phases: Phase 1 focuses on civil site design, technical specifications, and construction management for the drilling of a new well and the abandonment of the existing one; Phase 2 covers architectural, mechanical, electrical, and instrumentation design, as well as the equipping and commissioning of the groundwater production well. Technical requirements specify the use of 24-inch diameter stainless steel Ful-Flo louvered well screens and compliance with AWWA potable water well construction standards, Riverside County, and California State Water Resources Control Board regulations. The contract will be awarded based on the most advantageous proposal, considering both price and other factors. Selected consultants must provide a project manager as the primary point of contact and adhere to a monthly itemized invoicing process with a 45-day payment cycle. Key requirements include maintaining active registration in the System for Award Management (SAM), providing performance and payment bonds for 100 percent of the contract price, and complying with California prevailing wage laws. Deliverables include a Basis of Design Report, 60 percent and 100 percent design drawings and cost estimates, and various project performance reports. Proposals must be submitted via PlanetBids by September 1, 2026, and must include a cover letter, a detailed project approach, staff qualifications, a five-year project history, and three professional references.

Ardurra Group, Inc.

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, identified by contract number C2305, is a solicitation for professional design, bidding support, and engineering services during construction. The project is owned by the Elsinore Valley Municipal Water District and is located in Lake Elsinore, Riverside, California. Managed by AKM Consulting Engineers, the scope of work falls under NAICS code 541330 for civil engineering. The solicitation was posted on August 15, 2026, with a response deadline of September 1, 2026. Interested parties may contact Katie Neubauer as the primary point of contact. This opportunity is open for professional engineering services to support the infrastructure replacement of the Corydon Well.

AKM Consulting Engineers

POSTED

about 10 hours ago

DEADLINE

Test Facility Design and CommissioningThe Texas Space Commission is seeking a subcontractor for the Test Facility Design and Commissioning project to provide specialized engineering and project management services. The scope of work focuses on the design, upgrading, and commissioning of aerospace test facilities, falling under NAICS code 541330. Interested parties must submit their responses by the deadline of September 4, 2026. Further details regarding this opportunity can be accessed through the Texas SmartBuy portal.

Texas Space Commission

POSTED

about 24 hours ago

DEADLINE

Town of Peace River - Request for Proposal - UTILITIES MASTER PLAN UPDATE

Solicitation # AB-2026-05748

The Town of Peace River is soliciting proposals from qualified professional engineering consulting firms to update its 2010 Utility Master Plan for the local water distribution system. The selected firm will be responsible for assessing existing infrastructure capacity and functionality, calibrating the hydraulic water model, and evaluating current and future system demands based on population projections and growth patterns. The scope of work includes identifying system deficiencies, establishing boundary design conditions for new developments, and providing conceptual designs and cost estimates for necessary improvements. The project culminates in the delivery of a prioritized 15-year capital improvement plan featuring specific triggers for infrastructure upgrades, along with guidance on operations and maintenance. Interested parties must submit their responses by September 16, 2026, at 3:59 PM. This solicitation, identified as AB-2026-05748, is managed by the Water/Wastewater Manager for the Town of Peace River in Alberta.

Town of Peace River

POSTED

about 24 hours ago

DEADLINE

in about 1 month

CAD & Technical Documentation ServicesSeattle City Light is seeking a subcontractor to provide CAD and technical documentation services for its infrastructure projects. The selected provider will be responsible for producing and managing CAD drawings, as-built documentation, and technical reports, ensuring all deliverables strictly adhere to the agency's established CAD standards. This opportunity is categorized under NAICS code 541330. Interested parties must submit their responses by the deadline of October 2, 2026. Further details and application processes are available through the official procurement portal.

Seattle City Light

POSTED

DEADLINE

in about 2 months

Grid Modernization & Resilience PlanningSeattle City Light is seeking a subcontractor for the Grid Modernization and Resilience Planning project to support critical infrastructure improvements. The scope of work focuses on conducting comprehensive studies regarding distribution automation, microgrids, advanced metering infrastructure, and climate resilience, with a specific emphasis on system modeling and the integration of renewable energy sources. Interested parties must submit their responses by October 2, 2026. This opportunity falls under NAICS code 541330 and is managed by the agency in Washington. Detailed information and application portals are available through the Seattle procurement system.

Seattle City Light

POSTED

DEADLINE

in about 2 months

Building Code Compliance Inspection (Field Inspections)This subcontract opportunity, issued by the California Fire & Rescue agency, focuses on Building Code Compliance Field Inspections. The selected provider will be responsible for conducting on-site inspections during the construction phase to ensure all work adheres to approved plans, the California Building Code, and essential life safety requirements. Key deliverables include the detailed documentation of all findings and the issuance of correction notices when non-compliance is identified. The project is categorized under NAICS code 541330. Interested parties must submit their responses by the deadline of October 7, 2026. Further details and application procedures can be accessed through the provided procurement portal link.

POSTED

DEADLINE

in about 2 months

Fire Sprinkler System Plan ReviewThis subcontract for Fire Sprinkler System Plan Review involves the technical evaluation of fire sprinkler system designs to ensure full compliance with NFPA 13, NFPA 14, and the California Fire Code. The scope of work includes verifying hydraulic calculations, pipe sizing, and coverage requirements, as well as identifying deficiencies and coordinating with relevant stakeholders. The project is managed by the California Fire & Rescue agency under NAICS code 541330. Interested parties must submit their responses by the deadline of October 7, 2026, following the posting date of August 14, 2026.

POSTED

DEADLINE

in about 2 months

Fire Alarm System Plan ReviewThis subcontract opportunity, titled Fire Alarm System Plan Review, is issued by the California Fire & Rescue agency. The selected provider will be responsible for performing technical reviews of fire alarm system designs to ensure full compliance with the California Building Code, California Fire Code, NFPA 72, and specific amendments required by the city of Anaheim. Key deliverables include the issuance of correction notices and the granting of final approvals for the designs. The solicitation was posted on August 14, 2026, with a response deadline of October 7, 2026. This project falls under NAICS code 541330, which pertains to engineering services. Interested parties can find further details and submission guidelines through the OpenGov procurement portal.

POSTED

DEADLINE

in about 2 months

Smoke Damper and Smoke Control System TestingThe Texas Health and Human Services Commission is seeking a subcontractor for the Smoke Damper and Smoke Control System Testing project. The scope of work involves the inspection and testing of smoke dampers and smoke control systems, specifically focusing on stairwell pressurization and exhaust systems to ensure they perform correctly during emergency situations. This opportunity falls under NAICS code 541330. Interested parties must submit their responses by the deadline of August 28, 2026, at 4:30 PM. Further details and application processes can be accessed through the Texas SmartBuy portal.

Health and Human Services Commission

POSTED

DEADLINE

Fire Damper Inspection and Maintenance ServicesThe Texas Health and Human Services Commission is seeking a subcontractor for Fire Damper Inspection and Maintenance Services under NAICS code 541330. The selected provider will be responsible for the inspection, testing, and maintenance of fire dampers within ductwork to guarantee operational reliability during fire events, which includes comprehensive documentation and the reporting of any identified deficiencies. This opportunity was posted on August 14, 2026, with a response deadline of August 28, 2026, at 4:30 PM. Interested parties can find further details and submission guidelines through the Texas SmartBuy portal.

Health and Human Services Commission

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Uninterruptible Power Supply (UPS) Unit Supply and DeliveryThe National Research Council of Canada is seeking a subcontractor for the procurement and delivery of one Uninterruptible Power Supply (UPS) unit. This equipment is required to maintain continuous power operations at the NRC facility located in Boucherville, Quebec, and must adhere to all provided technical specifications and delivery requirements. The solicitation was posted on August 14, 2026, with a response deadline of September 7, 2026. This opportunity falls under NAICS code 335313 and is managed by the Government of Canada.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Benchtop X-ray Diffractometer

Solicitation # 26-58091

The National Research Council of Canada is soliciting a benchtop X-ray diffractometer (XRD) for use at its Mississauga Research Center to support advanced materials and chemical science research, with a requirement that the system analyze powder, small crystal, thin film, and metallic samples. The instrument must be a fully integrated, plug-and-play benchtop unit with all components—including the X-ray generator and goniometer—housed in a single enclosure, capable of operating in both reflection and transmission modes, and able to automatically recognize and identify installed optical components and sample stages. The system must be easily reconfigurable with minimal realignment, designed for integration into automated workflows, and delivered within 20 weeks of contract award. The procurement follows a Lowest Price Technically Acceptable (LPTA) methodology, where bidders must meet all mandatory technical criteria outlined in Annex F before price becomes the deciding factor; only technically compliant proposals are eligible for award, with no trade-offs permitted between cost and performance. The contract value is not pre-established, and pricing is to be submitted by offerors in a lump sum for the primary instrument, along with optional items such as additional units and extended warranties. The successful bidder must provide full system integration, including a database license (COD or ICDD PDF-4/PDF-5), an uninterruptible power supply, and all necessary hardware, firmware, and software. Delivery must occur at 2620 Speakman Drive, Mississauga, Ontario, under DAP Incoterms® 2020, with Canada retaining the right to inspect the equipment at the contractor’s facility or upon delivery, and a 30-day acceptance window following delivery. All equipment must comply with Canadian Electrical Code Part 1, Radiation Safety Codes, and be certified by a Standards Council of Canada-accredited body. Packaging must prioritize reusable, recyclable, or returnable materials under Green Procurement Policy guidelines, and each shipment must be clearly labeled with quantity, part number, description, contract number, and procurement billing number. Contractors must hold Canadian citizenship or be a Canadian supplier under reciprocal procurement rules, and personnel may require CONFIDENTIAL to TOP SECRET security clearances based on access to classified material. Proposals must be submitted electronically by August 17, 2026, in separate, non-zipped files not exceeding 10MB, including technical and financial offers along with mandatory declaration forms certifying compliance with integrity, employment equity, international sanctions, and anti-forced labor

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Uninterruptible Power Supply (UPS)

Solicitation # 26-58072

The National Research Council Canada has issued a Request for Proposal under solicitation number 26-58072 for the procurement of one Uninterruptible Power Supply. This open tendering process is governed by the Canadian Free Trade Agreement and the Policy on Reciprocal Procurement, restricting eligibility exclusively to Canadian suppliers or partners. The successful bidder will be selected based on the lowest price offered, with all deliverables required to be received by November 30, 2026. Interested parties must submit their tenders to the NRC Bid Receiving Unit by September 7, 2026, at 14:00 EDT. Submissions are accepted in either of Canada's official languages. The procurement is being managed by Senior Procurement Officer Frédérik Beauchamp, and the delivery of the equipment is designated for Canada.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Refurbishment of the CTA Curtain Wall

Solicitation # 26-58095

The National Research Council Canada is seeking a qualified supplier to dismantle and store the existing sunshade system on the East side of the Aluminum Technology Center at 501 University Boulevard East in Saguenay, Quebec, in preparation for replacing the insulated glass and spandrel panels on both the East and North façades. The work aims to restore watertightness and enhance thermal insulation of the curtain wall system. Interested bidders are required to attend one of two mandatory site visits scheduled for July 17th, 2026 at 9:00 a.m. EDT or August 4th, 2026 at 10:00 a.m. EDT, with all attendees required to bring valid photo identification and comply with full personal protective equipment standards, including safety glasses, hard hats, high-visibility vests, and safety footwear; failure to comply will result in denied access. Tenders must be submitted electronically to the NRC Bid Receiving Unit by the deadline of August 13th, 2026 at 7:00 p.m. EDT. All documentation may be submitted in either English or French, and the procurement is subject to the federally administered Integrity Regime. Bidders are solely responsible for regularly checking the Government Electronic Tendering Service for amendments, inquiries, and responses, as no direct notifications will be issued. The contract is classified under NAICS code 238150 and is open to all eligible suppliers, with encouragement for Indigenous businesses to register in the Indigenous Business Directory to access set-aside opportunities under the Procurement Strategy for Indigenous Businesses.

Glass and Glazing Contractors

POSTED

DEADLINE

Shipping, Packaging, and Logistics

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Heating and Temperature Control System Integration

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Precision Roller Fabrication and Coating

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Custom Electro-Mechanical System Design and Integration

POSTED

DEADLINE

Waste Disposal and Recycling Services

Materials Recovery Facilities

POSTED

DEADLINE

in about 1 month

HVAC Parts and Consumables Supply

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

HVAC Reporting and Documentation Services

Other Management Consulting Services

POSTED

DEADLINE

in about 1 month

Corrective HVAC Repair Services

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month