Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Communications Service Monitor (CSM) and Supporting Test Equipment

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515
New
Federal
Peak Power Analyzer, Peak Power Sensors, and Power Sensor Cables
Solicitation # N6833527R1006
The Naval Air Systems Command (NAVAIR) Warfare Center Aircraft Division is soliciting proposals for a three-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to modernize equipment for the Metrology and Calibration (METCAL) Program. The procurement covers Peak Power Analyzers, Peak Power Sensors, and Power Sensor Cables, with quantities ranging from a minimum of 3 analyzers and 6 sensors/cables to a maximum of 100 analyzers and 200 sensors/cables. All hardware must adhere to the technical and performance requirements defined in Calibration Standards Specification (CSS) 01-3244 and safety standard ANSI/ISA S82.02.01-1999. The period of performance is scheduled from February 26, 2027, to February 25, 2030, with firm-fixed-price pricing arrangements. Beyond hardware delivery, the contractor is required to provide at least one day of training for up to ten people at government sites in Patuxent River, Maryland, and Seal Beach, California. Key deliverables include COTS manuals, calibration certifications, OEM calibration procedures, and software version descriptions. Proposals will be evaluated based on technical understanding, past performance via the Supplier Performance Risk System (SPRS), and price, with the award intended for the responsible offeror with the lowest evaluated price rated acceptable in technical and past performance categories. Submissions are due by November 19, 2026, and must be processed through the Wide Area WorkFlow (WAWF) system for invoicing.
Navair Warfare Ctr Aircraft Division

POSTED

about 12 hours ago

DEADLINE

in 15 days
NAICS: 334515
New
Federal
6515--Wechsler Memory Scale
Solicitation # 36C24827Q0096
The Department of Veterans Affairs, Network Contracting Office 8, is issuing a Sources Sought Notice to conduct market research for the procurement of the Wechsler Memory Scale Fifth Edition (WMS-5) for the Orlando VA Medical Center. This notice is not a solicitation or request for quote and does not obligate the government to award a contract. The requirement is for a comprehensive adult memory assessment kit designed for individuals aged 16 to 90, featuring updated normative data representative of the contemporary U.S. population. The system must support both paper and digital administration and scoring, provide standardized index scores for auditory, visual, and working memory, and maintain compatibility with contemporary Wechsler Adult Intelligence Scale (WAIS) instruments. Interested contractors must submit a capability statement of no more than five pages to Contract Specialist Carl Myers by 1:00 PM EST on November 12, 2026. Submissions must include company identification, CAGE and SAM UEI numbers, business size, and socioeconomic status. The government is utilizing NAICS code 334515 with a size standard of 1,000 employees. Specifically, SDVOSB and VOSB respondents must demonstrate the ability to provide a product manufactured by a small business to be considered capable. The capability statement should highlight the firm's industry experience in providing the WMS-5 or similar scope and scale to ensure delivery requirements are met.
248-NETWORK Contract Office 8 (36C248)

POSTED

about 12 hours ago

DEADLINE

in 8 days
NAICS: 334515
New
International
Fast and High-resolution Oscilloscope
Solicitation # 26-58164
The National Research Council Canada is soliciting proposals for the purchase of a new, current-production, real-time mixed-signal oscilloscope to be used in a pulsed-mode measurement set-up for characterizing quantum cascade lasers at cryogenic temperatures. The required equipment must feature at least four simultaneously operational analog input channels with 50 ohm input termination, DC coupling, a minimum analog bandwidth of 4 GHz, and a native hardware ADC resolution of at least 12 bits. A critical technical requirement is a maximum real-time sample rate of at least 25 GS/s across all four channels simultaneously to accurately capture short pulses and fast transient features. The contract will be awarded to the compliant offeror with the lowest evaluated fixed price, based on a Delivered At Place (DAP) Incoterms 2020 basis to Ottawa, Ontario. All deliverables must be received by March 31, 2027, with the contract term extending to one year after delivery and acceptance. Proposals must be submitted electronically by November 13, 2026, and must include a technical offer, a financial offer, and the required submission and declaration forms. Additionally, the successful contractor must adhere to mandatory environmentally preferable packaging requirements and ensure all electrical equipment is certified according to the Canadian Electrical Code.
National Research Council of Canada

POSTED

about 19 hours ago

DEADLINE

in 9 days

AI Contract Overview

Show more

This subcontract opportunity is for the provision of a Communications Service Monitor and associated hardware to support prime contractors on US Air Force projects located at Offutt AFB. The required equipment must feature P25 Conventional Phase 1 capabilities, cable and antenna analysis for VSWR and Return Loss, and auto-test and alignment functionality specifically for Motorola APX Series LMR. The delivery includes one operational unit equipped with a hard transit case, RF cables, a 10 Amp current shunt, and a short-open-load calibrator, all of which must be factory-certified for calibration. Managed by the Department of Defense under the FA4600 55 Cons Pkp agency, this procurement is designated as a total Small Business Set Aside under NAICS code 334515. The solicitation was posted on August 31, 2026, with a response deadline of September 14, 2026. Performance of the contract will take place in zip code 68113.

General Info

Small business subcontract for P25 Communications Service Monitors supporting US Air Force projects.

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

0, NE, 68113, USA

Set-Aside

SBA

Documents

This scope was carved out of FA460026Q0121.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Radio & Antenna Communications Service Monitor - Offutt AFB, NE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4600 55 Cons Pkp
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies a Communications Service Monitor (CSM) and hardware for prime contractors on US Air Force projects at Offutt AFB. Provides a CSM with P25 Conventional (Phase 1) capabilities, Auto-Test and Alignment for Motorola APX Series LMR, and Cable and Antenna Analysis for VSWR and Return Loss. Includes Short-Open-Load Calibrator, 10 Amp Current Shunt, RF cables, and hard transit case. Requires factory-certified calibration. Delivers one operational CSM unit.

More opportunities from Department Of Defense → FA4600 55 Cons Pkp

Same awarding agency

NAICS: 561730
New
Federal
Snow Removal + Hauling BPA
Solicitation # FA460027Q0001
Solicitation FA460027Q0001 is a Total Small Business Set-Aside for a Blanket Purchase Agreement to provide mission-essential snow clearing, relocation, and hauling services at Offutt Air Force Base, Nebraska. The contractor is responsible for maintaining operational capability across a total clearing footprint of 1,014,497 square feet, including the B1000 Complex and Capehart off-base lots. Key performance requirements include achieving a bare pavement standard of 0.25 inches of residual snow, maintaining a minimum clearance speed of 150,000 square feet per hour, and mobilizing all personnel and equipment within two hours of notification. The contractor must provide CDL licensed operators and a fleet of five tandem-axle dump trucks with at least 10.0 cubic yard capacity. The BPA has a total lifetime purchase limitation of 350,000 dollars, with a similar cap per individual call. The ordering period generally spans from November 12, 2026, through April 2027 or 2028, depending on the specific line item. Pricing is based on a Firm Fixed Price structure with tiered CLINs based on snow accumulation levels, including an incremental fee for extreme snowfall exceeding 10 inches. Offers are due by November 5, 2026, at 8:00 AM CST and must include a technical plan limited to 15 pages, a price list, and a mission essential services plan. Awards will be made to the responsible offerors whose quotes are determined to be technically acceptable and most advantageous to the government based on total evaluated price.
Landscaping Services

POSTED

1 day ago

DEADLINE

in about 14 hours
View Details
NAICS: 237120
New
Federal
Gas Line Repair
Solicitation # GasLineRepair
The 55th Contracting Squadron at Offutt Air Force Base, Nebraska, is conducting a sources sought market survey to identify qualified contractors for the repair and replacement of gas distribution system components. The scope of work includes repairing gas leaks on 6 inch and 8 inch pipes and valves, as well as replacing components on 2 inch pipes and valves. Specific tasks involve repairing a 6 inch HDPE line near B479, replacing 8 inch valves and flanges near B73, and replacing a 2 inch isolation valve on the service line to B73. The project also requires the replacement or reconnection of cathodic protection and the installation of new valve boxes and risers marked for gas. The period of performance extends from the time of award until April 30, 2027. Due to base gas load requirements, the 8 inch valve replacement must be performed during warmer spring weather, specifically when temperatures show five consecutive days with lows above 40 degrees Fahrenheit and highs above 65 degrees Fahrenheit. All work must comply with 49 CFR 192, API, ASME, and American Gas Association standards, as well as ISO 9001 quality management processes. Contractors are required to provide welder certifications and perform pressure testing for at least one hour post-installation. This is a small business set-aside under NAICS code 237120. Interested parties must submit their capabilities package, including company information and socio-economic status, to the designated point of contact by 12:00 PM CST on November 17, 2026.
Oil and Gas Pipeline and Related Structures Construction

POSTED

1 day ago

DEADLINE

in 13 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS