Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Component Fabrication & Machining for M4 Trainers

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires precision machining and fabrication of non-functional M4 trainer components, including upper and lower receivers, handguards, and trigger assemblies, all built to exact military specifications. These parts are intended for training purposes and must meet rigorous dimensional and material standards without being operational firearms. The work is classified under NAICS code 332322, indicating specialized metal fabrication and machining services, and is structured as a subcontract under the Department of Defense. Performance is to occur at a facility in San Antonio, Texas with ZIP code 78236, and the opportunity was posted on April 28, 2026. While the solicitation number and set-aside details are not provided, the contract is issued by the FA3016 502 Cons Cl organization, indicating integration within a larger defense logistics or training support framework.

General Info

Precision machining of non-functional M4 trainer parts to military specs in San Antonio, Texas, under DoD subcontract.

Agency

Department Of Defense → FA3016 502 Cons ClView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

DWG, TX, 78236, USA

Set-Aside

NONE

Documents

This scope was carved out of FA301626P0038.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

M4 Trainer Weapons

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedApr 28

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA3016 502 Cons Cl

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA3016 502 Cons Cl

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Precision machining or fabrication of non-functional M4 trainer components such as upper/lower receivers, handguards, and trigger assemblies to exact military specifications.

Similar Contracts

Same NAICS industry code

seeking Small Businesses to supply products and services in support of our USAF Noise Suppressor Sustainment Contract

Solicitation # seeking-small-businesses-supply-products-services-support-our-usaf-noise-suppressor-sustainment

Vital Link Inc. is seeking small business subcontractors across all socioeconomic categories to provide products and services in support of the USAF Noise Suppressor Sustainment Contract. As part of its subcontracting plan, the company aims to achieve a goal of 32 percent small business spend. The primary NAICS code associated with this effort is 332322, though the company is specifically looking for businesses operating under NAICS codes 335999, 238320, 325520, 332722, and 332999. The scope of work involves the supply of a wide range of materials and specialized services, including raw stainless and carbon steel, hardware such as bolts and bearings, and machined or fabricated parts. Additional requirements include insulation, fiberglass cloth, sealants, electrical components like PLC electronics, motors, gearboxes, and facility components such as roll-up doors and exterior sheeting. Interested parties should contact Ashley Barry, Ashley Aguilar, or A.C. Kujawa. The response deadline for this solicitation is December 31, 2026.

Vital Link Inc.

POSTED

about 5 hours ago

DEADLINE

Manufacture of Access Covers (NSN 5340-00-771-8370)

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Aluminum Kennel Supplier/Manufacturer

Information Technology Contracting Division

POSTED

about 21 hours ago

DEADLINE

Supply of Stainless Steel Pegboards with Drip Troughs

Csa East 6 Usda-Fs

POSTED

about 21 hours ago

DEADLINE

Aluminum Boat Trailer

Ofc Of Acqusition Grants-National

POSTED

about 21 hours ago

DEADLINE

Automatic Door Hardware and Operator Supply

South Orange County Community College District

POSTED

DEADLINE

Waiting Shelter Fabrication and Supply

DAS Procurement

POSTED

DEADLINE

in about 1 month

Perforated Cold-Rolled Steel Sheet Supply

Defense Logistics Agency

POSTED

DEADLINE

Marine Structural Metal Door Manufacturing

FLUID HANDLING DIVISION

POSTED

DEADLINE

Titanium Tube Elbow Fabrication

FLUID HANDLING DIVISION

POSTED

DEADLINE

Ready Service Ammunition Locker Fabrication and Supply

FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacture and Supply of Mounting Brackets (NSN 5340-01-690-6973)

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → FA3016 502 Cons Cl

Same awarding agency

Storage System Assembly and Floor Anchoring

All Other Specialty Trade Contractors

POSTED

about 21 hours ago

DEADLINE

Sheetmaster 100 Roll-Out Shelf Storage System Supply

Industrial Supplies Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Portable Solar Generators

Solicitation # FA301626Q0277

Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

Provide and Install Brand Name Sheetmaster 100 Roll-Out Shelf Storage System

Solicitation # FA301626Q0287

Solicitation FA301626Q0287 is a combined synopsis and request for quote for the procurement and installation of one brand name Sheetmaster 100 Roll-Out Shelf Storage System, manufactured by Rack Engineering Division, for Hangar 5 at Joint Base San Antonio Randolph, Texas. The project requires the delivery, professional assembly, and structural anchoring of a blue, all-welded steel system to a concrete floor slab. Technical specifications include a load capacity of 5,500 lbs per shelf, a standard height of 84 inches, and an automatic locking system that secures shelves at 100 percent open or closed. The contractor must also perform a dry-run test to demonstrate full shelf extension and provide all necessary operations manuals and warranty paperwork. This is a 100 percent Small Business Set-Aside under NAICS code 332999. The government will award a single firm-fixed-price purchase order based on the lowest price technically acceptable (LPTA) evaluation. To be deemed technically acceptable, offerors must provide product literature and a detailed technical capability narrative substantiating their ability to complete the delivery, installation, and testing. Quotes are due by September 18, 2026, at 2:00 PM CDT. It is noted that funds are not presently available, and the government reserves the right to cancel the request. Payment will be processed electronically through the Wide Area WorkFlow system, and items must comply with MIL-STD-130 and MIL-STD-129 for unique item identification and shipment labeling.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Commercial Lodging for the 433rd Airlift Wing

Solicitation # FA301626Q0138

Solicitation FA301626Q0138 is a request for a firm-fixed-price Blanket Purchase Agreement (BPA) to provide commercial lodging services for the 433rd Airlift Wing at Joint Base San Antonio (JBSA) Lackland. This acquisition is a total set-aside for small business concerns under NAICS code 721110, with a master limit of 1,269,000 dollars over a five-year period of performance. The contractor must provide safe, clean, and compliant accommodations for personnel in various duty statuses, including Unit Training Assemblies and Active Duty. Requirements include a maximum capacity of 50 double and 25 single occupancy rooms per UTA, daily maid service, and strict adherence to AFOSH 91-001, ADA compliance, and the FEMA National Master List for fire safety. The award will be granted to the Highest Technically Rated Offeror with a Fair and Reasonable Price (HTRO-FRP) through a three-step evaluation process. First, only the five lowest-priced quotes advance to technical evaluation. Second, offerors must pass four mandatory gates: FEMA listing, a 15-mile driving radius from JBSA-Lackland or Fort Sam Houston, JTR per diem rate compliance, and a successful physical site inspection. Third, eligible quotes are scored on proximity to the installation, room block guarantees, and amenities such as in-room kitchenettes and complimentary hot breakfast. Payment is handled via Government Purchase Card for calls under 25,000 dollars and through the Wide Area Workflow (WAWF) module for calls exceeding that amount, with consolidated monthly invoices due by the 10th of each month. Submissions must be divided into two distinct volumes: a price submission and a technical submission. Any pricing information included in the technical volume will result in the quote being deemed non-responsive.

Hotels (except Casino Hotels) and Motels

POSTED

about 21 hours ago

DEADLINE

Palo Alto Firewall Appliances & Licenses

Solicitation # FA301626Q0262

Solicitation FA301626Q0262 is a request for quotation for the procurement of brand-name Palo Alto Networks PA-440 firewall appliances and proprietary security subscription licenses to replace end-of-life Cisco equipment at the Medical Education and Training Campus (METC) in Building 1374 at JBSA Fort Sam Houston, Texas. The requirement is a 100 percent small business set-aside under NAICS 334111. The government intends to award one five-year firm-fixed-price purchase order, spanning approximately September 30, 2026, through September 29, 2031. Key deliverables include two PA-440 appliances and one-year subscriptions for Advanced URL Filtering, WildFire, Threat Prevention, DNS Security, and Premium Support, with four additional option years for subscription licenses. Amendment 1 added CLIN 007 for installation labor and testing and extended the quote submission deadline to September 16, 2026. The government will evaluate quotes using the Lowest Price Technically Acceptable (LPTA) criteria, where technical quotations are assessed on a pass/fail basis based on meeting salient characteristics. No reconditioned or used parts are acceptable. While the government intends to award based on initial submissions, it reserves the right to conduct interchanges with quoters if deemed necessary. The contractor is responsible for providing all management, tools, labor, and materials for installation and testing. Payment shall be processed through Wide Area Workflow (WAWF). Security requirements include obtaining base identification and vehicle passes for personnel performing work at the installation.

Electronic Computer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Trane Variable Frequency Drive (VFD) Equipment Supply

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Trane Chiller VFD Specialized Technician Services

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Bldg 3820 Chiller Diagnostic and VFD Services

Solicitation # FA301626Q0271

Solicitation FA301626Q0271 is a requirement for comprehensive diagnostic troubleshooting and repair services for a Trane Chiller system located at Building 3820, JBSA Fort Sam Houston. The primary objective is to isolate and resolve operational issues with the Variable Frequency Drive (VFD) to restore the system to 100 percent operational capability in accordance with manufacturer standards. This procurement is set aside for Women-Owned Small Businesses under NAICS 238220. The scope of work includes up to 17 hours of diagnostic labor within a three-day service window, with a performance period scheduled from September 30, 2026, to October 30, 2026. Key deliverables include the execution of electrical, control, and mechanical diagnostics, the submission of a detailed diagnostic report to the CE 502d Project Manager, and the immediate replacement of the VFD if found defective using brand new OEM parts. The contractor must provide a one-year workmanship guarantee and pass through all original manufacturer warranties to the government. Strict adherence to safety protocols is required, including OSHA 29 CFR 1910.147 for Lockout/Tagout, NFPA 70E for arc flash safety, and EPA Section 608 certification for technicians handling refrigerants. Final acceptance requires performance testing under load witnessed by JBSA representatives to verify full operational capability.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

MACC - Attachment_8_Q_and_A_Consolidated - GOV Response - Repair Lackland Youth Center Playground

Solicitation # FA301626R6034

The Department of Defense, specifically the FA3016 502 Cons Cl, has issued solicitation FA301626R6034 for the repair of the Lackland Youth Center Playground. This project is categorized under NAICS code 237990 and will be performed in JBSA Lackland, Texas. Interested parties must submit their responses by the deadline of September 17, 2026. The primary point of contact for this requirement is Francisco Martinez Martinez. Additional details and documentation can be accessed through the provided government portal.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

BMET Work Center Furniture Package-Workbenches and Installation

Solicitation # FA301626Q0276

Solicitation FA301626Q0276 is a firm-fixed-price request for quotation issued by the 502d Contracting Squadron at JBSA-Randolph for the turn-key delivery, assembly, and installation of a Biomedical Equipment Technician (BMET) Work Center Furniture Package at the Port San Antonio Consolidated Storage and Deployment Center in Texas. This requirement is 100% set aside for small businesses under NAICS 337127 and is conducted on a brand-name or equal basis, specifically referencing Lista/Vidmar products. The scope of work includes the procurement and installation of L-shaped technician and admin workbenches, straight ESD workbenches, various storage cabinets, and specialized seating. All ESD-safe components must meet ANSI/ESD S20.20 and EOS/ESD S4.1 standards. The contractor is also responsible for electrical hookups, ESD grounding, and adhering to DoD item unique identification and marking standards per MIL-STD-130 and MIL-STD-129. The government will utilize a Best Value Tradeoff source selection methodology to award the contract. Technical capability is evaluated on a pass/fail basis, while the delivery and installation schedule, past performance, and price serve as tradeoff factors. Non-price factors are considered significantly more important than price in the final determination. All items must be delivered and installed by September 30, 2026. Offerors are required to submit a four-part electronic proposal covering technical capability, delivery schedules, past performance, and pricing. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

Institutional Furniture Manufacturing

POSTED

DEADLINE

Freight and Delivery Services (Lackland AFB)

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS