Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Compressed Cylinder Overhaul, Repair, and Testing Services

Active

Response Deadline11/30/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of compressed cylinders. The selected contractor will be responsible for disassembling and inspecting cylinders, executing repairs according to BE Aerospace Inc drawings and technical publications, and performing operational testing to deliver one overhauled Compressed Cylinder (NSN 8120-01-585-5090) in ready-for-issue condition. The project is categorized under NAICS code 811210 and will be performed in Philadelphia. To ensure technical compliance, the contractor must maintain ISO 9001 or SAE AS9100 quality management certifications and adhere to ANSI/NCSL Z540.3 calibration standards. The solicitation was posted on October 30, 2026, with a response deadline of November 30, 2026.

General Info

Navy subcontract for repair and modification of one compressed cylinder in Philadelphia.

Agency

Department Of The Navy → Navsup Weapon Systems Support

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of N0038326QSB78.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CYLINDER,COMPRESSED — 8120015855090 — N0038326QSB78

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 30

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 09:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs teardown, evaluation, repair, and modification of compressed cylinders for prime contractors on Navsup Weapon Systems Support projects. Disassembles and inspects cylinders, executes repairs per BE Aerospace Inc drawings and technical publications, and performs operational testing. Requires ISO 9001 or SAE AS9100 quality management and ANSI/NCSL Z540.3 calibration. Delivers one overhauled and tested Compressed Cylinder (NSN 8120-01-585-5090) in RFI condition.

Similar Contracts

Same NAICS industry code

Building Management System Maintenance, Repairs, and Services

Solicitation # 2027-RFP-00133

The County of San Mateo Department of Public Works is soliciting proposals for solicitation number 2027-RFP-00133 to secure a single contractor for the comprehensive maintenance, repair, and service of Building Management Systems (BMS) across various county-owned facilities. The contract, intended for a term of up to five years, encompasses routine preventative maintenance, including bi-monthly inspections and calibration of sensors and controllers, as well as system upgrades, 24/7 technical support, and emergency repairs with a required two-hour response time. The selected vendor must ensure the reliability and efficiency of these systems while adhering to industry standards such as ASHRAE, ISO, and ANSI. Qualified proposers must demonstrate significant experience in BMS services and provide personnel certified in Tridium Niagara BMS who hold active C-10/C-20 licenses. Additionally, firms must be registered with SAM.gov and the Department of Industrial Relations. Proposals are evaluated on a 100-point scale, with 45 percent of the score based on the proposed service approach and 45 percent on relevant experience and team qualifications, while labor fees account for the remaining 10 percent. Submissions must be made electronically via the OpenGov eProcurement portal by November 4, 2026. The final agreement will incorporate standard county templates including requirements for HIPAA compliance, non-discrimination under the ADA and Section 504, and the maintenance of general liability, workers compensation, and professional errors and omissions insurance.

Public Works - Facilities Services - FMO

POSTED

about 2 hours ago

DEADLINE

Ball Valve Teardown, Evaluation, and Level 1 RepairThis subcontract with the Department of Defense for Navsup Weapon Systems Support Mech involves the teardown, evaluation, inspection, and full Level 1 repair of Ball Valve Parts Kits under NIIN 013385191. The scope of work requires executing repairs according to technical drawings, specifically including seat stack height measurements and necessary modifications to restore all components to like-new condition. To ensure quality and precision, the contractor must maintain ISO-9001 or MIL-I-45208 quality systems and adhere to ISO-10012 or ANSI-Z540 calibration standards. The final deliverable consists of fully repaired and certified kits. The response deadline for this opportunity is December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

QED Preventative and Remedial Maintenance Service

Solicitation # 2031ZA27Q00009

Department Of The Treasury

POSTED

about 5 hours ago

DEADLINE

J065--FY27 SERVICES (BASE+4) - Canon CT Service Contract

Solicitation # 36C24227Q0076

Solicitation 36C24227Q0076 is a firm-fixed-price request for quote issued by the Department of Veterans Affairs for the annual preventative maintenance of two Canon/Toshiba Aquilion Prime 160 CT machines located at the Buffalo VA Medical Center. This opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811210. The contract structure consists of a base period from November 1, 2026, to October 31, 2027, with four additional option years. The scope of work requires preventative maintenance to be performed four times per year, as well as all corrective maintenance labor and parts, including X-ray tube replacements. The contractor must adhere to manufacturer specifications and meet strict response times, including a 30-minute telephone response and an on-site Field Service Engineer arrival within 4 to 6 hours for repairs. The government will award the contract to the responsible offeror whose quote is most advantageous based on a comparative evaluation of technical capabilities, past performance, and price. Proposals must include the offeror's Unique Entity Identifier, a completed price schedule, and a statement of agreement with all terms and conditions. Following amendments to the original solicitation, the final deadline for the submission of proposals is October 28, 2026, at 2:00 PM EDT. Awardees are required to maintain commercial general liability insurance and comply with federal regulations regarding patient data privacy, security prohibitions on specific telecommunications equipment, and the Prompt Payment Act.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 5 hours ago

DEADLINE

Rotary Compressor Repair and Overhaul ServicesThis subcontract for the Department of the Navy's NAVSUP Weapon Systems Support involves the teardown, evaluation, and repair of Rotary Compressors under NIIN 015028208. The selected contractor must be an OEM authorized distributor responsible for disassembling and repairing assets in strict accordance with TDP Version 007, OEM specifications, and approved technical orders. All work must include inspection and testing per OEM drawings, with final asset marking compliant with MIL-STD-130, REV N, resulting in the delivery of one fully repaired and tested compressor. The project is categorized under NAICS code 811210 and will be performed in Mechanicsburg, Pennsylvania. Interested parties should note the response deadline of November 6, 2026, for this specialized maintenance and overhaul service.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

DISTRIBUTING SYSTEM — 6150015591184 — N0038326QNB42

Solicitation # N0038326QNB42

This presolicitation under number N0038326QNB42 is for the repair or modification of a distributing system, specifically NSN 7R-6150-015591184-H1, with a quantity of three units delivered FOB Origin. Due to the flight critical nature of the item and a lack of sufficient technical data for open competition, the government requires source approval prior to contract award. Only previously approved sources have been solicited, though new applicants may apply by submitting the required documentation detailed in the NAVSUP Weapon Systems Support Source Approval Information Brochures. The solicitation is managed by the Department of Defense through the Navsup Weapon Systems Support office in Philadelphia. Proposals must be submitted by November 9, 2026. Because the government is not utilizing FAR Part 12 for commercial item acquisition, interested parties must notify the contracting officer within 15 days if they can satisfy the requirement with a commercial item. Failure to provide all necessary source approval data will result in the proposal not being considered for award.

Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Parking Technology Maintenance and SupportThe Parking Technology Maintenance and Support subcontract involves providing annual maintenance and technical support for parking enforcement hardware used by prime contractors on City of Palo Alto transportation projects. The scope of work focuses on the upkeep of handheld citation devices, License Plate Recognition systems, and various field equipment utilizing specialized diagnostic tools. To ensure quality and compliance, the contractor must hold OEM certification for the specific hardware being serviced. The primary deliverables for this engagement include maintaining the operational status of all equipment and providing detailed maintenance logs. This opportunity is categorized under NAICS code 811210 and is managed through the California transportation agency. Interested parties must submit their responses by the deadline of December 7, 2026.

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Electrical Testing and Calibration Specialist

City of Roseville

POSTED

DEADLINE

in about 2 months

Stair Lift Operational Safety TestingThis subcontract opportunity involves performing mandatory annual operational safety tests for stair lifts at the City of Tampa Convention Center. The selected provider will support prime contractors by conducting thorough mechanical checks of lift mechanisms and utilizing diagnostic tools to verify the functionality of emergency stop and safety features. The primary objective is to ensure all equipment meets safety standards through rigorous inspection and testing. Qualified candidates must provide a licensed technician specifically certified for lift safety inspections. The scope of work concludes with the delivery of formal operational safety test reports and official certifications. Interested parties should note the response deadline of November 11, 2026, for this project managed under the Convention and Tourism agency.

Convention & Tourism

POSTED

DEADLINE

Escalator Inspection and Operational Safety TestingThis subcontract for Escalator Inspection and Operational Safety Testing involves performing physical, mechanical, and operational safety inspections for prime contractors on City of Tampa Convention Center projects. The scope of work includes utilizing escalator-specific diagnostic tools to verify the functionality of braking systems and safety switches, culminating in the delivery of formal safety certifications and completed inspection reports. Qualified providers must hold a State of Florida licensed Elevator/Escalator Inspector certification to perform these services. The opportunity is categorized under NAICS code 811210 and is managed by the Convention and Tourism agency in Florida, with a response deadline set for November 11, 2026.

Convention & Tourism

POSTED

DEADLINE

Elevator Inspection and Category 1 Safety TestingThis subcontract for Elevator Inspection and Category 1 Safety Testing involves performing physical, mechanical, and operational safety inspections for prime contractors working on City of Tampa Convention Center projects. The scope of work specifically includes conducting annual no-load safety testing utilizing governor testing kits and specialized load testing tools, with the final deliverables being comprehensive inspection reports and safety certifications for the elevators. To qualify for this engagement, the provider must hold a State of Florida licensed Elevator Inspector/Technician certification. The project falls under NAICS code 811210 and is managed by the Convention and Tourism agency in Florida. Interested parties must submit their responses by the deadline of November 11, 2026.

Convention & Tourism

POSTED

DEADLINE

Installation, Calibration, and Technical SetupThis subcontract involves the installation, configuration, and calibration of an Automated BOD Analyzer for prime contractors working on Illinois Environmental Protection Agency projects. The scope of work includes unpacking the unit, connecting necessary utilities, configuring the software, and performing initial calibrations with specialized solutions to ensure the equipment meets strict laboratory standards. All services are to be performed on State premises during designated hours to deliver a fully operational system. The project is managed under the Illinois Fiscal / Procurement agency with a response deadline of November 4, 2026. Classified under NAICS code 811210, this opportunity focuses on technical setup and precision calibration to support environmental monitoring efforts within the state.

FISCPROC532 - Fiscal / Procurement

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support

Same awarding agency

MIL-STD-2073 Aircraft Component PackagingThis subcontract involves providing specialized packaging materials and final crating services for aircraft fuel cell projects under the Navsup Weapon Systems Support for the Department of the Navy. The contractor is responsible for ensuring all items are packaged and labeled for government shipment in strict accordance with MIL-STD-2073-1 and ASTM D3951-18 standards, utilizing MIL-SPEC materials and containers specifically suited for the sensitivity of fuel cells. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 339991. Interested parties should note that the response deadline for this opportunity is November 30, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

SAE-AS22759 Series Aerospace Wire SupplyThis subcontract involves the procurement and delivery of specialized aerospace-grade wiring for prime contractors supporting Navsup Weapon Systems Support aircraft fuel cell projects. The scope of work requires the sourcing of wire that meets SAE-AS22759 series specifications to serve as a direct replacement for obsolete MIL-W-81381 materials. All supplied wiring must be of domestic origin and accompanied by a certification of conformance to the required SAE standards. Managed by the Department of the Navy, the performance of this contract is centered in Philadelphia. Interested parties must adhere to the response deadline of November 30, 2026, for this requirement categorized under NAICS code 335132. The primary objective is to ensure the delivery of certified, high-specification wiring essential for the maintenance and operation of critical aircraft fuel cell systems.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aircraft Fuel Cell Teardown, Repair, and ModificationThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of aircraft fuel cells. The selected contractor will be responsible for conducting receipt inspections, performing repairs according to specific drawings and manuals, and executing final acceptance testing to deliver ready-for-issue fuel cells complete with historical record files. To qualify, the provider must maintain ISO 9001 and SAE AS9100 certifications and ensure full compliance with MIL-STD-130. The work requires a specialized facility equipped with tooling, jigs, and calibration systems that meet ANSI/NCSL Z540.3 or ISO-10012-1 standards. Performance of the contract is centered in Philadelphia, with a response deadline set for November 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aerospace/Defense Grade Wiring SupplyThis subcontract involves the supply of high-specification aerospace and defense grade wiring for prime contractors supporting US Navy NAVSUP electronic repair projects. The scope of work requires the delivery of certified SAE-AS22759 series wire, which serves as the designated replacement for MIL-W-81381. Performance for this contract will take place in Philadelphia, Pennsylvania, under the oversight of the Department of the Navy. A critical requirement for this engagement is the provision of certification of origin in accordance with the Buy American-Balance of Payments Program. This ensures that all supplied materials are manufactured within the United States or sourced from a qualifying country. Interested parties should note the response deadline of November 30, 2026, for this procurement effort.

Other Fabricated Wire Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Distributing System Repair and RFI RestorationThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Distributing Systems for prime contractors. The scope of work includes disassembling units, replacing faulty internal components, and reassembling them in accordance with IPC/EIAJ-STD-001C soldering standards using SAE-AS22759 series wire. The ultimate goal of the project is the delivery of three restored Ready for Issue units. Performance will take place in Philadelphia and requires strict adherence to technical and security standards. The contractor must utilize calibration equipment compliant with NCSL Z540.3 or ISO 10012 and maintain NIST SP 800-171 cybersecurity compliance. The solicitation was posted on October 30, 2026, with a response deadline of November 30, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aircraft Fuel Cell Pressure and Leak TestingThis subcontract for Aircraft Fuel Cell Pressure and Leak Testing supports the Department of the Navy's NAVSUP Weapon Systems Support. The selected contractor will perform specialized pressure testing and leak detection for three fuel cells, ensuring all repaired units are inspected according to technical drawings and repair manuals. Work will be performed in Philadelphia and requires the use of calibration tools that adhere to ANSI/NCSL Z540.3 or ISO-10012-1 standards. To qualify, the contractor must maintain an ISO 9001 or equivalent quality management system. Key deliverables include the submission of detailed inspection reports and RFI certification for each of the three fuel cells. The solicitation was posted on October 30, 2026, with a response deadline of November 30, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

SAE-AS22759 Aerospace Wire SupplyThis subcontract involves the procurement and delivery of high-performance aerospace-grade wiring for prime contractors supporting the Department of the Navy's NAVSUP Weapon Systems Support. The scope of work specifically requires the supply of SAE-AS22759 series wire, which must be delivered to a repair facility located in Philadelphia. A critical requirement of the agreement is the provision of certification of conformance to guarantee that the supplied material is not MIL-W-81381. The project falls under NAICS code 335313 and is managed through the NAVSUP Weapon Systems Support agency.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aircraft Fuel Cell Repair and RFI RestorationThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of aircraft fuel cells. The contractor is responsible for delivering three Aircraft Fuel Cells (NSN 1680-01-530-7265 V2) in Ready for Issue condition, ensuring all work adheres to technical drawings, manuals, and MIL-STD-130 marking standards. Technical requirements include the use of SAE-AS22759 series wire and the employment of IPC/EIAJ-STD-001C certified personnel. To ensure quality and compliance, the provider must maintain ISO 9001 or AS9100 quality systems. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 336413. Interested parties must submit their responses by November 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Moisture Separator Replacement Parts SupplierThis subcontract opportunity with the Department of the Navy's Navsup Weapon Systems Support involves the supply of internal components, seals, and hardware for the Moisture Separator, identified by NIIN 016504184. The selected supplier will provide replacement parts or kits to a repair facility in Philadelphia, ensuring all items are sourced from the original equipment manufacturer or are qualified replacements that adhere to technical publications and drawings. The contractor is required to provide comprehensive authenticity documentation and certifications confirming compliance with the Buy American and Trade Agreements Acts. This procurement falls under NAICS code 423830, with a response deadline set for November 30, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Moisture Separator Repair and Overhaul ServicesThis subcontract for Moisture Separator Repair and Overhaul Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of the Navy. The scope of work involves the complete teardown, evaluation, repair, and modification of moisture separators to return five units to Ready for Issue condition. This process includes disassembling units, cleaning and inspecting components, and performing reassembly and modifications in strict accordance with technical publications using specialized tooling and test equipment. The project requires strict adherence to industry and government standards, specifically IPC/EIAJ-STD-001C, MIL-STD-130, and NIST SP 800-171. Performance will take place in Philadelphia, Pennsylvania, under NAICS code 811219. Interested parties should note the response deadline of November 30, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Non-Destructive Testing (NDT) and Inspection ServicesThis subcontract for Non-Destructive Testing (NDT) and Inspection Services supports Navsup Weapon Systems Support projects for the Department of the Navy. The selected provider will perform specialized inspections and evaluations of aircraft slats to identify fatigue, corrosion, or cracks using X-ray, Ultrasonic, or Dye Penetrant methods. The primary deliverables include detailed NDT inspection reports and structural integrity certifications. Performance will take place in Philadelphia, Pennsylvania. To qualify, contractors must hold NAS410 or equivalent NDT certification and maintain ISO 9001 or SAE AS9100 standards. The solicitation was posted on October 30, 2026, with a response deadline of November 30, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aerospace Component Finishing and Coating ServicesThis subcontract for Aerospace Component Finishing and Coating Services involves providing specialized surface treatments and protective coatings for aircraft slats and components on behalf of Navsup Weapon Systems Support. The work must be performed in accordance with Boeing drawing 114A5010-404 and requires the contractor to possess industrial coating equipment and maintain ISO 9001 or SAE AS9100 certifications. The project is based in Philadelphia, Pennsylvania, and falls under NAICS code 332813. The selected provider will be responsible for delivering finished components along with all necessary process certifications. The response deadline for this opportunity is November 30, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS