This Government Contract opportunity from Georgia was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Compressor and Mechanical Equipment Supply & Installation

Closed

State & Local

Submission Closed08/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333992

New

SLED

Hydraulic System and Winch Integration

POSTED

DEADLINE

Simultaneous Cold Metal Transfer Welding Unit - Sole Source

Solicitation # oregon-state-university-1286155

Oregon State University is seeking a sole source contract with Fronius USA LLC for the procurement of a Simultaneous Cold Metal Transfer Welding Unit. This specialized equipment is required for Wire Arc Additive Manufacturing and is distinguished by its ability to combine two electrically isolated wire electrodes into a single weld pool. The unit must provide up to 60 percent higher deposition rates than standard CMT while maintaining low heat input, ensuring arc stability and consistent bead geometry for layer-by-layer manufacturing. It is designed to support various materials, including titanium, aluminum, and high-strength steels, while reducing material waste and post-processing time. The solicitation, identified by number oregon-state-university-1286155, was posted on August 28, 2026. The deadline for responses and any challenges to the sole source determination is September 4, 2026. Interested parties or those wishing to challenge the determination should contact Scott Lommers via email.

Oregon State University

POSTED

DEADLINE

Specialized Test Fixture and Tooling Design/ManufactureThis subcontract, issued by the Department of Defense under Navsup Weapon Systems Support, focuses on the design, fabrication, and validation of custom test fixtures, jigs, and special tooling. These tools are specifically required for the functional testing and repair of drive modules. The project is categorized under NAICS code 333992 and stipulates that no government-furnished equipment will be provided for the completion of the work. The opportunity was posted on August 28, 2026, with a response deadline of September 28, 2026. Interested parties must ensure all submissions are completed by the specified cutoff to be considered for the specialized manufacturing and design requirements of this contract.

Navsup Weapon Systems Support

POSTED

DEADLINE

F7003-250869 - Pulse Laser Cleaning Machine

Solicitation # WS5853035266

The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5853035266 for the procurement of a Pulse Laser Cleaning Machine. This federal opportunity is designated for performance in Nova Scotia and is managed by contracting authority Brodie White. Interested parties must submit their responses by the deadline of September 15, 2026. The official notice was posted on August 28, 2026, and further details regarding the tender can be accessed through the CanadaBuys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

Sourcing of Individual Kit Components (Sub-Supplier)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Water Filtration and Treatment Equipment Supply

POSTED

DEADLINE

GUIDE, WIRE, GAS SHIE

Solicitation # SPE8E5-26-T-4076

This contract, identified as SPE8E5-26-T-4076, is a solicitation by the Defense Logistics Agency for the procurement of two gas shield wire guides, identified by NSN 3431014567023. The items are associated with Miller Electric Mfg. LLC part numbers 079 599 and 11B5090957-2. Delivery is required within 10 days of order, with a required delivery date of August 24, 2026, shipping FOB Origin to Fort Sill, Oklahoma. The agreement mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with packaging specifically following ASTM D3951. Technical and quality requirements are governed by the DLA Master List, and the contract specifies that the shipment must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. Inspection and acceptance will take place at the destination.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Weighing Scale Supply and DeliveryThis subcontract, issued by the Department of Defense under the Medical Supply Chain FSH, requires the supply and delivery of a commercial-grade weighing scale. The equipment must feature a 400 LB or 160 KG capacity with 1/4 LB or 100 G graduation and include a height rod with 1/8 inch or 1 mm graduation. All items must be compliant with NSN 6530016806354 and delivered to the place of performance in APO 96260-5479 within 84 days. The procurement is categorized under NAICS code 333992. The solicitation was posted on August 25, 2026, with a response deadline of September 1, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-4066

This contract, identified as solicitation SPE8E5-26-T-4066, is issued by the Defense Logistics Agency for the procurement of one cutting torch tip, NSN 3433-01-147-5627. The required item must be compatible with Harris models 62-3 and 42-3 hand cutting torches and corresponds to part number 6290-1-GG from National Torch Tip Co Inc or Lincoln Electric Co. The procurement falls under NAICS code 333992 and requires delivery within five days after the order is placed. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination in Jacksonville, Florida. Packaging must adhere to DLA packaging requirements for procurement, specifically RP001 and MIL-STD-129, with hazardous materials requiring compliance with TQ requirement IP025 or commercial packaging per ASTM D3951 for non-hazardous items. The contract incorporates various technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.

Defense Logistics Agency

POSTED

DEADLINE

HANDLE, WELDING, CUTT

Solicitation # SPE8E5-26-T-4069

This contract, identified as SPE8E5-26-T-4069, is a solicitation by the Defense Logistics Agency for the procurement of one welding and cutting handle, part number 1401300, with NSN 3433-01-324-3813. The order specifies a delivery timeframe of five days after the order is placed, with the shipment being delivered FOB Origin and inspected and accepted at the destination in Jacksonville, Florida. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-129 and ASTM-D-3951-98 standards. It also incorporates specific technical and quality requirements via the DLA Master List and requires the removal of government identification from any non-accepted supplies. Shipping must be conducted via the fastest traceable means, explicitly prohibiting the use of parcel post.

Defense Logistics Agency

POSTED

DEADLINE

PARTS KIT, ELECTRONIC E

Solicitation # SPE7M5-26-T-440Q

This contract is for the procurement of one electronic equipment parts kit, identified by NSN 5999013874275 and part number 7222313-00. The kit is a critical application item consisting of specific components, including part numbers 7908945-02, 7908147-01, 7908695-06, and 7916130-00. Delivery is required within 20 days after order, with a final required delivery date of August 27, 2026, shipping to Davis Monthan AFB in Arizona. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment and specific packaging standards per MIL-STD-2073-1 and MIL-STD-129. Quality assurance will be managed through zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. The contractor must ensure all kit components are properly cushioned, listed, and barcoded in a single box, with shipping conducted via traceable means.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-442R

This contract is for the procurement of two power transformers under solicitation SPE7M5-26-T-442R for the Department of Defense. The requirement specifies NSN 5950-00-418-3820 and identifies approved part numbers from Precision Electronics Inc, B G Laboratories Inc, and ElbitAmerica Inc. The delivery timeline is set for 46 days after receipt of order, with a required delivery date of March 12, 2026, and a need ship date of June 9, 2026. Shipping is FOB Origin and destined for DLA Distribution Jacksonville, Florida. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for labeling and RP001 for palletization. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-defect acceptance policy for sample lots. Technical and quality requirements are further defined by the DLA Master List, and any non-accepted supplies must have government identification removed per requirement RQ011. Inspection and acceptance will take place at the destination.

ACTIVE DEVICES DIVISION

POSTED

4 days ago

DEADLINE

in 10 days

AI Contract Overview

Cherokee County Water and Sewerage Authority is seeking a subcontractor to supply, rig, and install new air burst compressors along with related mechanical equipment including air receivers, dryers, and control systems. The scope of work encompasses full delivery, mechanical setup, and integration of all required components to ensure operational readiness. The solicitation was posted on July 9, 2026, with a response deadline of August 6, 2026, at 7:00 PM. The contract falls under NAICS code 333992, which covers other commercial and industrial machinery and equipment manufacturing. The place of performance and specific location details are not provided, but the project is managed by the Georgia-based agency. There is no set-aside designation specified, and the contract is structured as a subcontract, meaning the prime contractor or awardee may be responsible for coordinating the procurement with other parties. All proposals must meet technical and operational requirements for the compressed air systems, with emphasis on reliability and integration with existing infrastructure.

General Info

Supply and install air burst compressors and related equipment for Cherokee County Water and Sewerage Authority by August 6, 2026.

Agency

Georgia → Cherokee County Water and Sewerage AuthorityView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

This scope was carved out of PE-33957-NONST-2026-000000021.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Advertisement for Bid

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 9

subcontract

Response DeadlineAug 6

Deadline has passed

Submission Closed

08/06/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeorgia → Cherokee County Water and Sewerage Authority

ContactsNo contacts available

OfficeN/A

Organization / Agency

Georgia → Cherokee County Water and Sewerage Authority

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply, rigging, and installation of new air burst compressors and associated mechanical equipment including air receivers, dryers, and controls.