This Government Contract opportunity from Texas was posted on October 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Concession Equipment Maintenance and Repair Services

Closed

State & Local

Submission Closed10/22/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on November 1, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their responses via the official supplier portal by the specified cutoff time to be considered for the contract.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting lump sum fee-for-service bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts required to diagnose and repair the clutch assembly and power take-off system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, O-rings, and hydraulic pipes, resurfacing the flywheel, and performing necessary fluid and filter changes. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and disengagement, as well as confirming the PTO system operates correctly under load. This solicitation is set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone concerns, under NAICS code 811310. Interested offerors must submit a bid sheet, proof of insurance, and a completed supplier packet including a W-9 and self-certification form to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value. The contract incorporates various federal regulations, including Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31, and requires strict adherence to security, confidentiality, and non-disclosure protocols regarding government facilities and information.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

LEKTRIEVERS and MOVABLE SHELVING UNITS MAINTENANCE SERVICE CONTRACT-BASE PLUS FOUR OPTION YEARS WESTERN AREA POWER ADMINISTRATION DESERT SOUTHWEST REGIONThe Western Area Power Administration, under the Department of Energy, is forecasting a maintenance service contract for Lektrievers and movable shelving units within the Desert Southwest Region. This requirement is designated as a small business set-aside under NAICS code 811310, with the primary place of performance located in Arizona. The contract structure consists of a base period followed by four option years. The current incumbent for these services is Business and Office System Services LLC. Interested parties can coordinate with the Small Business Program Managers for further details regarding this upcoming procurement opportunity.

Western Area Power Administration

POSTED

DEADLINE

EO 14398 WAPA SNR: Tracy Substation KT2A Transformer RefurbishmentThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the Tracy Substation KT2A Transformer Refurbishment project. This contract falls under NAICS code 811310 and is focused on the specialized refurbishment of transformer equipment. The procurement is listed with a posted date of November 1, 2026. Transfluid Services, Inc. is identified as the incumbent contractor for this work. Interested parties may coordinate with the Small Business Program Managers for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

PCB REFURBISHMENTThe Western Area Power Administration, under the Department of Energy, has issued a forecast for a PCB Refurbishment contract. This project is categorized under NAICS code 811310 and is designated as a small business set-aside. The work is expected to be performed in Colorado, with Bennett-Alvarado, Inc. listed as the incumbent contractor. The forecast was posted on November 1, 2026. Interested parties can coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

Western Area Power Administration (WAPA) Sierra Nevada Region (SNR) requires a Contractor to replace the KY1A bushings at the Trinity Substation using government furnished bushings.The Western Area Power Administration Sierra Nevada Region is seeking a contractor to perform the replacement of KY1A bushings at the Trinity Substation located in California. This project involves the installation of bushings provided by the government. This opportunity is forecasted as a small business set-aside under NAICS code 811310. The contract is managed by the Department of Energy, with Springfield Solutions LLC listed as the incumbent contractor.

Western Area Power Administration

POSTED

DEADLINE

ANNUAL PREVENTATIVE MAINTENNCE FOR OVERHEAD DOORS AND ROLLING GATES ANNUAL (Base plus Four Option Years) WESTERN AREA POWER ADMINISTRATION DESERT SOUTHWEST REGIONThe Western Area Power Administration, under the Department of Energy, is forecasting a contract for annual preventative maintenance of overhead doors and rolling gates within the Desert Southwest Region. The project is structured as a base year with four additional option years and will be performed in Arizona. This opportunity is designated as a small business set-aside under NAICS code 811310. The incumbent contractor for these services is A.S.A.P. Door Repair & Service, Inc.

Western Area Power Administration

POSTED

DEADLINE

Corning KY3A Transformer Refurbishment for the Western Area Power AdministrationThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the refurbishment of the Corning KY3A Transformer. This project is designated as a small business set-aside under NAICS code 811310 and is scheduled for performance in California. The procurement process is managed by the Small Business Program Managers, with Springfield Solutions LLC identified as the incumbent contractor. Interested parties can find further details through the official Department of Energy acquisition forecast.

Western Area Power Administration

POSTED

DEADLINE

PHILIP O&M FIRE SYSTEM UPGRADE ELECTRICAL PORTION, EO 14398The Western Area Power Administration, under the Department of Energy, has issued a forecast for the Philip O&M Fire System Upgrade Electrical Portion, identified as EO 14398. This project focuses on electrical work associated with fire system upgrades and will be performed in South Dakota. The procurement is categorized under NAICS code 811310, and the current incumbent contractor for these services is API Group Life Safety USA LLC. The forecast was posted on November 1, 2026, and is listed as an other type of set-aside. Interested parties can coordinate with the Small Business Program Managers, specifically Tetrault and Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

Asphalt Storage Tank Maintenance and Repair

Solicitation # 601320000072188

The Texas Department of Transportation (TxDOT) issued Invitation for Bid 601320000072188 in October 2026 for the maintenance and repair of two Duraco Model 8250 asphalt storage tanks located at the Gonzales Maintenance Facility in District 13. The scope of work includes cleaning, the installation of new manway gaskets, the replacement of disturbed seals or components according to manufacturer recommendations, and the off-site transport and disposal of waste in compliance with Texas Health and Safety Code Chapter 361. Final payment is contingent upon a successful final inspection conducted by a TxDOT representative. Responses are due by November 6, 2026, at 3:00 p.m. Central Time and must be submitted via the Bonfire procurement portal. Bidders are required to provide a comprehensive submission including a price schedule in Excel format, qualifications and references, personnel resumes, and a mandatory child support obligation certification. Award decisions will be based on best value, with primary consideration given to purchase price and compliance with specifications. To be eligible, vendors must pass an initial screening of required documentation and maintain a vendor performance rating of A, B, or C in the CPA Vendor Performance Tracking System. Contractors must adhere to strict insurance requirements, including Commercial General Liability and Commercial Automobile Liability of 600,000 dollars per occurrence, and statutory Workers Compensation. The contract incorporates various state and federal mandates, including Title VI assurances, ADA considerations, and the Buy Texas affirmation. Invoicing must be submitted electronically to TxDOT and include a 15-digit contract number and a valid Texas Identification Number or EIN.

Texas Department of Transportation

POSTED

DEADLINE

Process Field Instrumentation & GaugesThis subcontract for Process Field Instrumentation and Gauges involves the supply and installation of critical process instrumentation, gauges, and sensors for prime contractors working on Porter-Tower Joint Municipal Authority WWTP projects in Schuylkill County, Pennsylvania. The scope of work includes the installation of pitot tube flow sensors, flow gage assemblies, diaphragm seals on non-potable water gauges, and full body line size pressure sensors on sludge piping, with the ultimate goal of delivering a fully installed and calibrated instrumentation system. The opportunity is categorized under NAICS code 811310 and was posted on October 30, 2026. Interested parties must submit their responses by the deadline of December 16, 2026, at 5:00 PM.

POSTED

DEADLINE

Conveyance Maintenance Services

Solicitation # 26-1336

Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.

Chicago Public Schools

POSTED

2 days ago

DEADLINE

in 19 days

AI Contract Overview

This subcontract for Concession Equipment Maintenance and Repair Services involves providing on-call diagnostics and repairs for commercial food service machinery on Texas A&M University Athletics projects. The selected provider will support prime contractors by responding to service calls within two hours and ensuring all repairs are completed within a three-day window. The contractor is responsible for delivering fully operational equipment and providing detailed repair service reports while maintaining strict compliance with federal and State of Texas safety and health standards. This opportunity is categorized under NAICS code 811310, with a response deadline set for October 22, 2026.

General Info

On-call food service equipment repair for Texas A&M Athletics by October 22, 2026.

Agency

Texas A&M University – Central Texas

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of TAMU-ITB-27-5125.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Maintenance and Repair Services for Concession Equipment

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 5

subcontract

Response DeadlineOct 22

Deadline has passed

Submission Closed

10/22/2026, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas A&M University – Central Texas

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas A&M University – Central Texas

Office AddressN/A

ContactsNo contact information available

Full Description

Performs on-call maintenance and repair services for concession equipment for prime contractors on Texas A&M University Athletics projects. Provides onsite diagnostics and repairs for commercial food service machinery, responding to calls within two hours and completing repairs within three days. Ensures compliance with federal and State of Texas safety and health standards. Delivers fully operational equipment and documented repair service reports.