Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Texas was posted on July 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Concrete Foundation or Site Preparation

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237120
New
SLED
WH Ford RTC Fueling System Repairs, Kentucky
Solicitation # W9128F27RA054
The WH Ford RTC Fueling System Repairs project is a design-build solicitation (W9128F27RA054) for comprehensive infrastructure upgrades at the W.H. Ford Regional Training Center in Greenville, Kentucky. This firm-fixed-price contract involves a wide range of technical repairs, including upgrading tank automatic tank gauges (ATG), repairing dispenser and offload island concrete, installing emergency fuel shut-off (EFSO) systems, and mounting leak detector probes on diesel aboveground storage tanks. Additional requirements include replacing canopy and fuel pipe coatings, installing concrete splash blocks, replacing tank vents and roof penetration boot seals, providing dead man controls for truck loading, and modifying tank access platforms and grounding systems. All work must adhere to UFC, NFPA, ASTM, and Department of Defense standards, with specific identification requirements following MIL-STD-161H. The project is a small business set-aside under NAICS code 237120, with proposals evaluated using the Lowest Price Technically Acceptable (LPTA) method. Technical evaluations focus on relevant experience, a detailed Gantt chart covering preconstruction, on-site construction, and post-construction phases, and a well-defined construction methodology. Successful offerors must begin work within 10 calendar days of the notice to proceed, with a final completion deadline of June 18, 2027. Proposals must be submitted in two separate volumes—technical and pricing—and must comply with Davis-Bacon Act wage determinations and strict cybersecurity and quality control requirements.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in about 1 month
NAICS: 237120
Federal
Mather Fueling System Repairs
Solicitation # PANNWD26P028176
The Mather Fueling System Repairs project, solicitation W9128F27RA045, is a design-build effort located at the Mather Army Aviation Support Facility in California. Managed by the USACE Omaha District, this firm-fixed-price contract is restricted as a total small business set-aside. The scope of work involves comprehensive repairs to AVGAS fueling systems, including the installation of sampling gauge hatches, mechanical gauges, and an automatic tank gauge system. Key construction tasks include recoating the tank exterior, replacing collision barriers, adding a full-length catwalk, and replacing audible and visual alarms. Additionally, the project requires the demolition and replacement of the POL operation building, relocation of a generator with a new concrete pad, repair of remote containment basin drainage, and various asphalt and concrete pavement replacements. The procurement utilizes the Lowest Price Technically Acceptable (LPTA) source selection method, evaluating proposals based on project experience—requiring three examples of projects exceeding 1 million dollars—and a detailed project schedule. The projected period of performance is 365 days. Contractors must comply with the Davis-Bacon Act for prevailing wages and adhere to strict regulatory standards, including UFC 3-460, OSHA, EPA, and DOT requirements. Deliverables include design documents in English units, as-built drawings, and a multi-stage inspection process consisting of punch-out, pre-final, and final acceptance inspections. Performance and payment bonds are required within 10 days of award.
W071 Endist Omaha

POSTED

9 days ago

DEADLINE

in 20 days
NAICS: 237120
SLED
Hammerman Gas/Diesel Tank Replacement Gunpowder Falls State Park
Solicitation # BPM059366
This project, solicitation BPM059366, involves the removal and replacement of above-ground gasoline and diesel fuel storage systems at the Gunpowder Falls State Park Hammerman Area in Baltimore County, Maryland. The scope of work requires the contractor to provide all labor, equipment, and materials to remove existing tanks, dispensers, piping, electronic systems, concrete pads, and bollards. Key deliverables include the installation of new storage tanks, concrete pads, and side-mount dispensers, as well as the provision of temporary gasoline and diesel tanks with metered dispensers for the duration of the project. All work must adhere to strict safety and environmental standards, including NFPA 30, 30A, and 78, API standards 650 and 620, and Maryland Department of the Environment regulations, with backfill compacted to a minimum of 95 percent. The contract is a Small Business Reserve Procurement, limiting the award to certified small businesses. The basis of award is the lowest responsive and responsible total bid. Procurement goals include a 15.00% MBE and 2.0% VSBE participation rate, with liquidated damages applicable for failure to comply with MBE requirements. The state reserves the right to apply reciprocal preference for resident bidders. Final acceptance is contingent upon the approval of the Facility Manager and DNR Project Engineer, requiring the submission of an approved electrical inspection certificate, a disposal manifest for contaminated soils and equipment, and three sets of manufacturer manuals and as-built drawings. Invoices are to be submitted to the Maryland Department of Natural Resources in Annapolis, with payments typically issued within 30 days of receipt of a proper invoice.

POSTED

9 days ago

DEADLINE

in about 1 month
NAICS: 237120
Federal
WH Ford RTC Fueling System Repairs
Solicitation # W9128F27RA054
Solicitation W9128F27RA054 is a design-build, firm-fixed-price contract for fueling system repairs at the W.H. Ford Regional Training Center in Kentucky, managed by the US Army Corps of Engineers, Omaha District. This project is a total set-aside restricted to 100% small businesses under NAICS code 237120. The scope of work involves comprehensive upgrades to two 10,000-gallon above-ground storage tanks, including the installation of an emergency fuel shutoff station, leak detection equipment, and an upgraded automatic tank gauging system. Additional requirements include repairing concrete and pavement, recoating fuel system canopies and piping, replacing tank vents, and improving grounding systems and equipment access platforms. All work must adhere to EM 385-1-1 safety standards, as well as IBC, NFPA, and ADA accessibility guidelines. Proposals must be submitted electronically in two separate volumes: a technical volume covering specialized experience, a Gantt chart for the project schedule, and a technical approach, and a separate pricing volume. The government will utilize the Lowest Price Technically Acceptable (LPTA) source selection process to award the contract. The proposal submission deadline has been extended to December 21, 2026, at 14:00 CST. Once awarded, the contractor must commence work within 10 days of the Notice to Proceed, with a final completion deadline of June 18, 2027. Compliance with the Davis-Bacon Act and Buy American requirements is mandatory.
W071 Endist Omaha

POSTED

11 days ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The contract seeks qualified contractors to perform site grading, excavation, and concrete foundation work including footings or pads necessary for the installation of a permanent outdoor structure at DFW International Airport in Texas. The work is classified under NAICS code 237120, indicating it falls within the heavy and civil engineering construction sector, specifically for site preparation and foundation-related tasks essential to infrastructure development. This is a subcontract opportunity with no set-aside designation, and responses are due by July 30, 2026, with the solicitation posted on July 27, 2026. All work must be completed at the airport’s designated location, though specific city or zip details are not provided. Interested parties must submit proposals through the official BonfireHub platform linked in the contract data.

General Info

Contract for site grading, excavation, and concrete work at DFW Airport due July 30, 2026 via BonfireHub.

Documents

This scope was carved out of DFW19492.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Custom Structure for Outdoor Range

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTexas → Dfw International Airport
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Site grading, excavation, and concrete foundation work such as footings or pads required for installation of a permanent outdoor structure.

More opportunities from Texas → Dfw International Airport

Same awarding agency

NAICS: 327320
SLED
Supply of Pre-Mixed and Volumetric Concrete
Solicitation # PA2315
DFW International Airport is soliciting bids under solicitation PA2315 for a five-year contract to provide an annual supply of pre-mixed and volumetric concrete. This procurement is conducted in accordance with Texas Local Government Code Title 8, Subtitle A, Chapter 252, with the award based on best value procedures. Evaluation criteria include the bidder's ability to meet specifications, the capacity to provide required insurance, the compensation offered, and the bidder's overall understanding of the scope of work and service challenges. While the Small Business Enterprise goal is 0%, the airport encourages participation from SBE-certified firms. Bids must be submitted electronically via dfwairport.bonfirehub.com by December 1, 2026, and must be signed to be considered. Required documentation includes a Business Disclosure Form and various response forms. The contract mandates compliance with the Texas Prompt Payment Act, requiring payment within 30 days of a valid invoice. Performance is managed by the Airport's Project Manager and Vice President of PMM, with a requirement that all work meets or exceeds industry standards. Additionally, the contractor must adhere to strict legal representations, including non-discrimination policies under Title VI and Section 504, and certifications regarding the non-boycott of Israel and energy companies.
Ready-Mix Concrete Manufacturing

POSTED

11 days ago

DEADLINE

in 17 days
View Details
NAICS: 541990
SLED
Art Maintenance and Conservation Services
Solicitation # PA2290
The Dallas Fort Worth International Airport is soliciting bids for a five-year contract to provide annual maintenance and conservation services for artworks located within airport terminals and other board-owned facilities. The selected service provider must adhere to the Code of Ethics and Guidelines for Practice of The American Institute for Conservation of Historic and Artistic Works. The scope of work includes the inspection and cleaning of two-dimensional works, sculptures, floor-integrated medallions, and terrazzo floors, as well as specialized monthly maintenance and emergency repairs for the Circling Sculpture in Terminal D. Additionally, the contractor is responsible for providing training for custodial and quality assurance staff. Due to airport operations, certain tasks must be performed during night shifts from 11:00 P.M. to 5:00 A.M. The contract will be awarded to the lowest responsive and responsible bidder, with evaluations based on unit pricing, quantities, and the overall quality and reliability of the bidder's performance. Bids must be submitted electronically via the Bonfire hub by November 24, 2026. The agreement is conducted under Texas Local Government Code Title 8, Subtitle A, Chapter 252, and requires compliance with OSHA safety standards and non-discrimination laws. While the Small Business Enterprise goal is set at 0%, the airport encourages the participation of SBE-certified firms. All work is subject to inspection by the Vice President of PMM or a designee to ensure it meets industry standards and specifications.
All Other Professional, Scientific, and Technical Services

POSTED

17 days ago

DEADLINE

in 10 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS