Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Concrete Sawcutting and Demolition

Active

State & Local

Response Deadline11/10/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Concrete Sawcutting and Demolition is issued by the Purchasing Services Unit of the Santa Clara Valley Water District in California. The selected contractor will support prime contractors on canal repair projects by performing sawcutting and removal of unsound shotcrete. Responsibilities include sawcutting the sides and bottom of repair areas, removing loose material to expose stable surfaces, and clearing away dust, mud, and vegetation to ensure a clean substrate ready for reinforcement. The scope of work requires the use of concrete saws, demolition equipment, and load hauling equipment. This opportunity was posted on October 13, 2026, with a response deadline of November 10, 2026. The project falls under NAICS code 238110, focusing on the delivery of approved substrates for critical infrastructure repair.

General Info

Subcontract for concrete sawcutting and demolition for Santa Clara Valley Water District canal repairs.

Agency

California → Purchasing Services Unit #820 Department of Santa Clara Valley Water District

NAICS

238110 - Poured Concrete Foundation and Structure Contractors

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of VW0733.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COYOTE-ALAMITOS CANAL SHOTCRETE REPAIRS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 09:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Purchasing Services Unit #820 Department of Santa Clara Valley Water District

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Purchasing Services Unit #820 Department of Santa Clara Valley Water District

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs sawcutting and removal of existing unsound shotcrete for prime contractors on Valley Water canal repair projects. Sawcuts both sides and bottom of repair areas, removes loose material to expose stable surfaces, and clears dust, mud, and vegetation. Utilizes concrete saws, demolition equipment, and load hauling equipment. Delivers a clean, stable, and approved substrate ready for reinforcement.

Similar Contracts

Same NAICS industry code

26_1119 – Robbinsdale-MN

Solicitation # 261119-robbinsdale-mn

Caldwell Tanks, Inc. is seeking subcontractors for a water tank construction project located in Robbinsdale, Minnesota. The solicitation includes specific opportunities for site work under NAICS 238910, tank painting under NAICS 238320, and electrical work under NAICS 238210. Bidders are expected to meet Disadvantaged Business Enterprise participation targets, specifically 3.5 percent for Minority Business Enterprises and 5.0 percent for Women Business Enterprises. The response deadline for this solicitation is November 17, 2026. Interested parties should coordinate with the primary point of contact, Kendal Eckert, to submit their proposals. This project is categorized as a solicitation with a focus on DBE participation as defined by the Department of Transportation.

Caldwell Tanks, Inc.

POSTED

about 1 hour ago

DEADLINE

Hickman Reservoir and Pump Station – 26_1109 – Hickman-NE

Solicitation # hickman-reservoir-pump-station-261109-hickman-ne

Caldwell Tanks, Inc. is seeking subcontractors for the construction of the Hickman Reservoir and Pump Station project located in Hickman, Nebraska. This solicitation is specifically set aside for small businesses and covers several specialized scopes of work, including site work, tank painting, electrical installations, and fencing. Interested parties must submit their responses by November 5, 2026. The primary point of contact for this opportunity is Eric Koetter, who can be reached via email or phone for further coordination regarding the project requirements and submission process.

Caldwell Tanks, Inc.

POSTED

about 1 hour ago

DEADLINE

Elbon Tank #2, Schedule 2- Elevated Tank Project

Solicitation # elbon-tank-2-schedule-2-elevated-tank-project

Caldwell Tanks, Inc. is seeking subcontractors for the Elbon Tank #2, Schedule 2 Elevated Tank Project located in Phillip, South Dakota. The project involves various construction needs, specifically targeting site work under NAICS 238910, tank painting under NAICS 238320, and electrical work under NAICS 238210. This solicitation is set aside for small businesses, including SAM.gov designated Small Disadvantaged Businesses and Department of Transportation Disadvantaged Business Enterprises. Interested parties must submit their responses by November 13, 2026. Primary coordination for this opportunity is managed by Eric Koetter.

Caldwell Tanks, Inc.

POSTED

about 1 hour ago

DEADLINE

Concrete Foundation and SlabsThis subcontract for Concrete Foundation and Slabs involves the supply and installation of concrete for footings, slabs, and structural elements at the Mississippi Gulf Coast Community College athletic performance addition in Perkinston, Mississippi. The scope of work includes performing formwork, rebar placement, and the pouring of structural concrete to deliver completed foundations and slabs for the prime contractor. The project is categorized under NAICS code 238110 and is managed through MPTAP. The solicitation was posted on October 28, 2026, with a response deadline set for October 29, 2026.

POSTED

about 2 hours ago

DEADLINE

in about 22 hours

Concrete Flatwork (Curbs, Sidewalks, and Paths)This subcontract opportunity involves providing concrete flatwork services for infrastructure projects managed by the City of San Antonio. The scope of work focuses on the forming and pouring of concrete to install curbs, sidewalks, shared-use paths, and driveways, ensuring proper pedestrian and vehicular access. These services are performed as a subcontractor supporting prime contractors. The project falls under NAICS code 238110 and is associated with the state of Texas. Interested parties must submit their responses by the deadline of December 1, 2026. Further details regarding the solicitation can be accessed through the Texas SmartBuy portal.

CITY OF SAN ANTONIO

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Concrete & ReinforcingThis subcontract for the Caswell Memorial SP, Campground and Day Use Improvements project involves the supply and installation of reinforcing steel and cast-in-place concrete for prime contractors. The scope of work includes the fabrication and installation of steel reinforcement and the placement of concrete for footings, slabs, and various structures, ensuring all work adheres to ACI 318, ACI 117, and ASTM C94/C94M standards. Managed by the California Department of Parks and Recreation, the project is located in San Joaquin. Interested parties must submit their responses by the deadline of November 24, 2026. The contract falls under NAICS code 238110 and focuses on critical structural concrete and reinforcement components.

California Department of Parks & Recreation

POSTED

about 4 hours ago

DEADLINE

Structural Concrete InfillThis subcontract for the Seattle Public Library involves performing structural concrete infilling on Levels 1, 2, and 3 of a facility project. The scope of work requires the contractor to infill openings in existing structural concrete floors, which includes the provision and installation of all necessary formwork, shoring, bracing, anchorage, and reinforcement. All work must be completed in accordance with ACI 301 and ACI 117 standards, utilizing bonding agents where new concrete contacts existing surfaces to ensure finished floor slabs are flush with adjacent areas. The project is categorized under NAICS code 238110 and was posted on October 28, 2026, with a response deadline of November 13, 2026. The selected subcontractor will operate under a prime contractor to deliver structural concrete solutions that meet the specific architectural and safety requirements of the library facility.

Seattle Public Library

POSTED

about 4 hours ago

DEADLINE

Concrete Curb, Gutter, and Driveway ConstructionThis subcontract for the City of Eatonton, Georgia, involves the installation of concrete curbing, gutters, and the replacement of concrete driveways for prime contractors on local infrastructure projects. The scope of work specifically requires the installation of 6,548 linear feet of 6x24 inch concrete curb and gutter, the replacement of 398 square yards of concrete driveways, and the replacement of 512 square yards of Class A concrete utilizing curb-forming equipment. The project mandates strict compliance with the Build America, Buy America Act to ensure the delivery of a fully installed curb and gutter system along with restored concrete surfaces. Interested parties must submit their responses by December 2, 2026, under NAICS code 238110.

City of Eatonton

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Structural Concrete RehabilitationThis subcontract for Structural Concrete Rehabilitation involves performing specialized restoration services for prime contractors on public facility projects within the City of Aurora. The scope of work encompasses a wide range of technical repairs, including partial-depth, full-depth, and vertical or overhead restorations. Key operational requirements include saw-cutting, sandblast cleaning of reinforcing steel, the installation of epoxy-coated steel, and the execution of form and pump repairs for members and corbels. Additionally, the contractor is responsible for replacing double tee connections utilizing shoring and epoxy doweling to deliver fully restored structural concrete members and slabs. The opportunity is categorized under NAICS code 238110 and is associated with the Public Facilities agency in Illinois. Interested parties must adhere to the established timeline, with the solicitation posted on October 28, 2026, and a response deadline set for November 23, 2026.

Public Facilities

POSTED

about 6 hours ago

DEADLINE

Cast-in-Place Concrete & Foundation WorkThis subcontract for Cast-in-Place Concrete and Foundation Work involves providing on-site concrete forming, reinforcing, and pouring services for municipal garage projects in the City of New London. The scope of work requires the installation of footings, grade beams, and ground floor concrete slabs utilizing rebar reinforcement and C20 strength concrete to deliver a completed foundation and ground floor slab for prime contractors. The project is categorized under NAICS code 238110 and is managed by the Procurement agency for the state of Connecticut. Interested parties must submit their responses by the deadline of December 1, 2026.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Concrete and FoundationsThis subcontract agreement involves the supply and installation of concrete for a school addition project managed by the Henry County Board of Education in Georgia. The scope of work includes comprehensive services for foundations, slabs, and structural elements, specifically covering formwork installation, rebar placement, and the pouring and finishing of footings, foundation walls, and concrete floor slabs. The opportunity is categorized under NAICS code 238110 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of December 3, 2026. The project requires the contractor to work under prime contractors to deliver completed foundation and flooring systems for the educational facility.

Henry County Board of Education

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Concrete Flatwork ContractorThe Napa Sanitation District is seeking a Concrete Flatwork Contractor for a subcontracting role to perform minor concrete repair and installation for street infrastructure. The selected contractor will work under prime contractors to repair and deliver curbs, gutters, sidewalks, and concrete valley gutters using standard industry tools such as concrete mixers and forms. All performing parties must maintain valid DIR Registration to be eligible for this work located in Napa, California. This opportunity was posted on October 28, 2026, with a response deadline of December 3, 2026. The project falls under NAICS code 238110 and focuses specifically on the restoration and installation of concrete flatwork to maintain local infrastructure standards.

Napa Sanitation District

POSTED

about 7 hours ago

DEADLINE

in about 1 month

More opportunities from California → Purchasing Services Unit #820 Department of Santa Clara Valley Water District

Same awarding agency

Pacheco Pumping Plant Pump 12 Rebuild

Solicitation # VW0725

POSTED

DEADLINE

in about 1 month

Erosion Control and Temporary Bypass InstallationThis subcontract for Erosion Control and Temporary Bypass Installation supports prime contractors on Valley Water canal repair projects within California. The scope of work involves the installation and maintenance of temporary environmental protections, specifically focusing on the placement of straw wattles at work area ends and the implementation of temporary rain bypass systems utilizing pumps and piping to prevent washout of canals and stormwater. The selected provider must ensure all activities comply with established environmental and safety standards to deliver fully functional rain bypasses and effective erosion control measures. This opportunity is managed by the Purchasing Services Unit of the Santa Clara Valley Water District under NAICS code 238910, with a response deadline set for November 10, 2026.

Site Preparation Contractors

POSTED

DEADLINE

Ready-Mix Concrete Supply (Shotcrete Mix)This subcontract involves the supply of 4,000 psi wet-mix shotcrete design and materials for prime contractors working on Valley Water canal repair projects. The selected provider is responsible for delivering wet-mix concrete to the project site and providing detailed mix designs that specify all cementitious materials, aggregates, water, admixtures, and fibers. Additionally, batch tickets must be provided for every delivery to ensure quality control. All materials must be approved by Valley Water and are required to meet a compressive strength of 4,000 psi at 28 days. This opportunity is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California, with a response deadline set for November 10, 2026.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Wet-Mix Shotcrete InstallationThis subcontract for Wet-Mix Shotcrete Installation involves the application of 4,000 psi wet-mix shotcrete for prime contractors working on Valley Water canal repair projects. The scope of work includes placing shotcrete at a nominal thickness of 3 inches using a pump and nozzle, applying a broom finish, managing slough and rebound, and applying all necessary curing materials to deliver a finished lining. All work must be performed in strict compliance with ACI SPEC-506-2-13 and Caltrans 2025 Standard Specifications Section 53. The project is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California, with a response deadline set for November 10, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Reinforcing Steel (Welded Wire Mesh) InstallationThis subcontract involves the supply and installation of welded wire mesh reinforcement for canal repair projects managed by the Santa Clara Valley Water District. The scope of work covers approximately 2,750 square feet, requiring the placement of 3-inch by 3-inch welded wire mesh with a nominal 1/8-inch wire. The contractor is responsible for ensuring all mesh is clean, properly supported, lapped, and tied, including the application of lap tie-in cement at all joints. To ensure quality and compliance, the contractor must provide manufacturer product certification. This project falls under NAICS code 238110 and is coordinated through the Purchasing Services Unit of the agency. Interested parties must adhere to the established timeline, with a response deadline set for November 10, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

COYOTE-ALAMITOS CANAL SHOTCRETE REPAIRS

Solicitation # VW0733

The Santa Clara Valley Water District is soliciting bids for solicitation number VW0733 to perform localized shotcrete repairs at three separate locations along the Coyote-Alamitos Canal in and near San Jose, California. The scope of work includes sawcutting and removing damaged shotcrete, preparing substrates, installing approximately 2,750 square feet of 3-inch by 3-inch welded wire mesh, and placing approximately 26.6 cubic yards of 4,000-psi wet-mix shotcrete with a broom finish. The contractor is responsible for all labor, materials, equipment, and environmental protections, including the installation of straw wattles and temporary rain bypasses. Work is restricted to Monday through Friday, 7:00 AM to 5:00 PM, with substantial completion required within 30 calendar days of the Notice to Proceed and final approval within 45 calendar days. The contract will be awarded to the lowest responsive and responsible bidder based on the Grand Total Bid Price. Bidders must submit their proposals electronically via the PlanetBids portal by November 10, 2026, including a bidder's bond of at least 10 percent of the total bid. For contracts exceeding 25,000 dollars, a 100 percent performance and payment bond is required. As a public works project, the contract is subject to California Prevailing Wage Law and requires compliance with various labor codes, including non-discrimination and apprentice employment regulations. Payment will be made within 30 days of receiving proper invoices for completed line items, not to exceed the lump sum bid price.

POSTED

DEADLINE

Industrial Welding & FabricationThis subcontract for Industrial Welding and Fabrication supports prime contractors on projects for the Santa Clara Valley Water District. The scope of work includes custom fabrication of metal parts, the welding of pipes and structural components, and the like-for-like replacement of fabricated metal appurtenances. Service providers are expected to utilize TIG, MIG, and Stick welding techniques and are responsible for the delivery of all fabricated metal components. To be eligible, contractors must hold a California State Contractor's License, maintain DIR Registration, and possess the necessary AWS certifications. The solicitation was posted on October 12, 2026, with a response deadline of November 13, 2026. This opportunity falls under NAICS code 332312 and is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Millwright & Industrial Machinery InstallationThis subcontract opportunity is for millwright and industrial machinery installation services to support prime contractors on projects for the Santa Clara Valley Water District. The scope of work involves the precision installation, alignment, and maintenance of industrial machinery, specifically focusing on heavy machinery installation and the precision leveling of rotating equipment utilizing industrial hoisting and rigging tools. Eligible contractors must possess a valid California State Contractor's License and maintain DIR Registration to qualify for the work. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Industrial Mechanical Maintenance & RepairThe Industrial Mechanical Maintenance and Repair subcontract involves providing on-call utility maintenance, troubleshooting, and repair services for prime contractors working on Santa Clara Valley Water District projects. The scope of work includes performing routine inspections, adjusting utility appurtenances, troubleshooting mechanical failures, and providing emergency dispatch support to ensure utility systems and equipment are fully restored and functioning. Eligible contractors must possess a valid California State Contractor's License and maintain DIR Registration. This opportunity is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California, with a response deadline set for November 13, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

On-Call Mechanical Maintenance Services

Solicitation # VW0737

The Santa Clara Valley Water District is soliciting bids for solicitation number VW0737 to secure an experienced contractor for on-call mechanical maintenance services. The scope of work includes troubleshooting, repair, fabrication, like-for-like replacement, restoration, inspection, adjustment, and emergency dispatch support for existing utility systems. This is a public works contract where work is assigned on an as-needed basis via Task Orders issued by the Project Manager. The scope specifically excludes new construction, capital improvements, general facilities maintenance, and staff augmentation. To qualify, contractors must maintain a full fabrication shop and ensure personnel possess necessary certifications in welding, equipment operation, and safety training, including confined space and lockout/tagout. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must submit a comprehensive package via the PlanetBids portal, including a bid pricing sheet with hourly labor rates for foremen, journeymen, welders, millwrights, and fabricators, as well as a bid bond of at least 10 percent of the proposal amount. Successful awardees must provide performance and payment bonds for 100 percent of the contract value and meet stringent insurance requirements, including Commercial General Liability and Professional Liability limits of 5 million dollars. Compliance with California Labor Code prevailing wage rates, DIR registration, and strict safety standards is mandatory. All work is subject to Valley Water's review and acceptance based on the specific requirements of each authorized Task Order.

POSTED

DEADLINE

Generator and Transfer Switch Installation

Solicitation # VW0732

Solicitation VW0732, under Contract No. A5920P, is a lump sum public works project issued by the Santa Clara Valley Water District for the installation of a District-furnished 25 KVA permanent standby generator and 100A Automatic Transfer Switch (ATS) at the Bailey Avenue Line Valve Vault. The scope of work includes site preparation, concrete pad work, equipment mounting, trenching, and the installation of a security fence and locked enclosure. A critical component of the project is the integration of SCADA components to provide remote start capability and status and alarm notifications for Operations staff. The project must be completed within a 16-week timeline and requires a contractor with a C10 Electrical Contractor license and at least five years of experience. The contract will be awarded to the lowest responsive and responsible bidder based on the Grand Total Bid Price. Bidders must submit comprehensive documentation via PlanetBids, including a bid bond of at least 10 percent of the proposal amount, a Small Business Outreach Program Affidavit, and a signed confidentiality agreement to access sensitive infrastructure data. The successful contractor must provide performance and payment bonds for 100 percent of the contract value and maintain significant insurance coverages, including 5 million dollars for Commercial General Liability and Professional/E&O Liability. All work must adhere to NEC standards, OSHA regulations, and California prevailing wage rates. Final acceptance is contingent upon a preliminary inspection and a final inspection following the completion of punch list items.

POSTED

DEADLINE

Metal Seated Ball Valve SupplierThis subcontract agreement involves the supply of industrial metal seated ball valves for prime contractors working on Valley Water system projects. The selected supplier is responsible for the manufacture and delivery of four 14-inch metal seated ball valves, each equipped with handwheel operators. To ensure quality and safety, all equipment must adhere to ASME B16.5 flange standards and ASME B16.34 general valve standards. Additionally, the valves must hold NSF 61 and NSF 372 certifications. This procurement is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California, with a response deadline set for November 12, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS