Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Reinforcing Steel (Welded Wire Mesh) Installation

Active

State & Local

Response Deadline11/10/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and installation of welded wire mesh reinforcement for canal repair projects managed by the Santa Clara Valley Water District. The scope of work covers approximately 2,750 square feet, requiring the placement of 3-inch by 3-inch welded wire mesh with a nominal 1/8-inch wire. The contractor is responsible for ensuring all mesh is clean, properly supported, lapped, and tied, including the application of lap tie-in cement at all joints. To ensure quality and compliance, the contractor must provide manufacturer product certification. This project falls under NAICS code 238110 and is coordinated through the Purchasing Services Unit of the agency. Interested parties must adhere to the established timeline, with a response deadline set for November 10, 2026.

General Info

Supply and install 2,750 square feet of wire mesh for canal repair projects.

Agency

California → Purchasing Services Unit #820 Department of Santa Clara Valley Water District

NAICS

238110 - Poured Concrete Foundation and Structure Contractors

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of VW0733.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COYOTE-ALAMITOS CANAL SHOTCRETE REPAIRS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 09:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Purchasing Services Unit #820 Department of Santa Clara Valley Water District

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Purchasing Services Unit #820 Department of Santa Clara Valley Water District

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs welded wire mesh reinforcement for prime contractors on Valley Water canal repair projects. Places 3-inch x 3-inch welded wire mesh with nominal 1/8-inch wire, ensuring mesh is clean, supported, lapped, and tied. Applies lap tie-in cement between mesh sections at joints. Requires manufacturer product certification. Delivers installed and secured reinforcement mesh over approximately 2,750 SF.

Similar Contracts

Same NAICS industry code

Concrete and FoundationsThis subcontract agreement involves the supply and installation of concrete for a school addition project managed by the Henry County Board of Education in Georgia. The scope of work includes comprehensive services for foundations, slabs, and structural elements, specifically covering formwork installation, rebar placement, and the pouring and finishing of footings, foundation walls, and concrete floor slabs. The opportunity is categorized under NAICS code 238110 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of December 3, 2026. The project requires the contractor to work under prime contractors to deliver completed foundation and flooring systems for the educational facility.

Henry County Board of Education

POSTED

about 2 hours ago

DEADLINE

in about 1 month

26_1119 – Robbinsdale-MN

Solicitation # 261119-robbinsdale-mn

Caldwell Tanks, Inc.

POSTED

about 2 hours ago

DEADLINE

Hickman Reservoir and Pump Station – 26_1109 – Hickman-NE

Solicitation # hickman-reservoir-pump-station-261109-hickman-ne

Caldwell Tanks, Inc. is seeking subcontractors for the construction of the Hickman Reservoir and Pump Station project located in Hickman, Nebraska. This solicitation is specifically set aside for small businesses and covers several specialized scopes of work, including site work, tank painting, electrical installations, and fencing. Interested parties must submit their responses by November 5, 2026. The primary point of contact for this opportunity is Eric Koetter, who can be reached via email or phone for further coordination regarding the project requirements and submission process.

Caldwell Tanks, Inc.

POSTED

about 2 hours ago

DEADLINE

Elbon Tank #2, Schedule 2- Elevated Tank Project

Solicitation # elbon-tank-2-schedule-2-elevated-tank-project

Caldwell Tanks, Inc. is seeking subcontractors for the Elbon Tank #2, Schedule 2 Elevated Tank Project located in Phillip, South Dakota. The project involves several specialized scopes of work, including site work under NAICS 238910, tank painting under NAICS 238320, and electrical work under NAICS 238210. This solicitation is set aside for small businesses, specifically targeting SAM.gov designated Small Disadvantaged Businesses and Department of Transportation Disadvantaged Business Enterprises. Interested parties must submit their responses by the deadline of November 13, 2026. Primary coordination for this opportunity is managed by Eric Koetter.

Caldwell Tanks, Inc.

POSTED

about 2 hours ago

DEADLINE

Site Concrete Contractor

County of Los Angeles Department of Public Works

POSTED

about 2 hours ago

DEADLINE

Concrete Pad and Bollard InstallationThis subcontract involves concrete construction services for the Washington County Transportation Authority facility projects in Pennsylvania. The scope of work requires the construction of one reinforced concrete fuel tank pad and the installation of protective six inch bollards. Technical specifications mandate the use of 5000-psig, 28-day compressive-strength concrete and the installation of epoxy-coated anchor bolts to ensure secure equipment anchorage. The project is categorized under NAICS code 238110 and is managed by Washington County. Interested parties must submit their responses by the deadline of November 18, 2026. The final deliverable consists of the completed reinforced concrete pad and all associated bollard installations.

Washington County

POSTED

about 4 hours ago

DEADLINE

ADA Concrete Flatwork and Barrier RemovalThis subcontract for ADA Concrete Flatwork and Barrier Removal involves providing specialized concrete services for prime contractors working on Los Angeles Unified School District facility projects in Los Angeles. The scope of work includes the demolition and removal of non-compliant concrete barriers, grading for slope compliance, and the installation of new ADA-compliant ramps, sidewalks, and curb cuts. The contractor is responsible for pouring and finishing concrete to strict ADA standards and installing necessary detectable warning surfaces to ensure accessible routes and entrances. All work must be performed in strict accordance with the owner's construction safety standards. Interested parties should note that the response deadline for this opportunity is December 2, 2026. The project falls under NAICS code 238110 and is focused on enhancing facility accessibility across the district.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Concrete Contractor

City of Mandeville

POSTED

about 10 hours ago

DEADLINE

Concrete & Demolition

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Industrial Concrete and Paving

POSTED

about 11 hours ago

DEADLINE

Carpentry & Porch Restoration

Village of Lancaster

POSTED

about 11 hours ago

DEADLINE

Site Preparation & Concrete Foundation

Mackinac Island Public Schools

POSTED

about 11 hours ago

DEADLINE

More opportunities from California → Purchasing Services Unit #820 Department of Santa Clara Valley Water District

Same awarding agency

Pacheco Pumping Plant Pump 12 Rebuild

Solicitation # VW0725

POSTED

DEADLINE

in about 1 month

Erosion Control and Temporary Bypass InstallationThis subcontract for Erosion Control and Temporary Bypass Installation supports prime contractors on Valley Water canal repair projects within California. The scope of work involves the installation and maintenance of temporary environmental protections, specifically focusing on the placement of straw wattles at work area ends and the implementation of temporary rain bypass systems utilizing pumps and piping to prevent washout of canals and stormwater. The selected provider must ensure all activities comply with established environmental and safety standards to deliver fully functional rain bypasses and effective erosion control measures. This opportunity is managed by the Purchasing Services Unit of the Santa Clara Valley Water District under NAICS code 238910, with a response deadline set for November 10, 2026.

Site Preparation Contractors

POSTED

DEADLINE

Ready-Mix Concrete Supply (Shotcrete Mix)This subcontract involves the supply of 4,000 psi wet-mix shotcrete design and materials for prime contractors working on Valley Water canal repair projects. The selected provider is responsible for delivering wet-mix concrete to the project site and providing detailed mix designs that specify all cementitious materials, aggregates, water, admixtures, and fibers. Additionally, batch tickets must be provided for every delivery to ensure quality control. All materials must be approved by Valley Water and are required to meet a compressive strength of 4,000 psi at 28 days. This opportunity is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California, with a response deadline set for November 10, 2026.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Wet-Mix Shotcrete InstallationThis subcontract for Wet-Mix Shotcrete Installation involves the application of 4,000 psi wet-mix shotcrete for prime contractors working on Valley Water canal repair projects. The scope of work includes placing shotcrete at a nominal thickness of 3 inches using a pump and nozzle, applying a broom finish, managing slough and rebound, and applying all necessary curing materials to deliver a finished lining. All work must be performed in strict compliance with ACI SPEC-506-2-13 and Caltrans 2025 Standard Specifications Section 53. The project is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California, with a response deadline set for November 10, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Concrete Sawcutting and DemolitionThis subcontract for Concrete Sawcutting and Demolition is issued by the Purchasing Services Unit of the Santa Clara Valley Water District in California. The selected contractor will support prime contractors on canal repair projects by performing sawcutting and removal of unsound shotcrete. Responsibilities include sawcutting the sides and bottom of repair areas, removing loose material to expose stable surfaces, and clearing away dust, mud, and vegetation to ensure a clean substrate ready for reinforcement. The scope of work requires the use of concrete saws, demolition equipment, and load hauling equipment. This opportunity was posted on October 13, 2026, with a response deadline of November 10, 2026. The project falls under NAICS code 238110, focusing on the delivery of approved substrates for critical infrastructure repair.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

COYOTE-ALAMITOS CANAL SHOTCRETE REPAIRS

Solicitation # VW0733

The Santa Clara Valley Water District is soliciting bids under solicitation VW0733 for localized shotcrete repairs at three separate locations along the Coyote-Alamitos Canal in and near San Jose, California. The scope of work includes sawcutting and removing damaged shotcrete, preparing substrates, installing approximately 2,750 square feet of 3-inch by 3-inch welded wire mesh, and placing approximately 26.6 cubic yards of 4,000-psi wet-mix shotcrete with a broom finish. The contractor is responsible for all labor, materials, equipment, and environmental protections, including the installation of straw wattles and temporary rain bypasses. Work is scheduled to be substantially completed within 30 calendar days of the Notice to Proceed, with final completion and approval required within 45 days. The desired overall completion date is December 31, 2026. The contract will be awarded to the lowest responsive and responsible bidder based on the Grand Total Bid Price. Bidders must submit their proposals electronically via the PlanetBids portal by November 10, 2026, including a verified e-Bond of at least 10% of the total bid amount. As a public works project, the contract is subject to California Prevailing Wage Law and requires compliance with various labor codes, including non-discrimination and apprentice employment regulations. For contracts exceeding 25,000 dollars, both performance and payment bonds equal to 100% of the bid price are required. Payment will be made per completed line item within 30 days of receipt of a proper invoice, not to exceed the lump sum bid price.

POSTED

DEADLINE

Industrial Welding & FabricationThis subcontract for Industrial Welding and Fabrication supports prime contractors on projects for the Santa Clara Valley Water District. The scope of work includes custom fabrication of metal parts, the welding of pipes and structural components, and the like-for-like replacement of fabricated metal appurtenances. Service providers are expected to utilize TIG, MIG, and Stick welding techniques and are responsible for the delivery of all fabricated metal components. To be eligible, contractors must hold a California State Contractor's License, maintain DIR Registration, and possess the necessary AWS certifications. The solicitation was posted on October 12, 2026, with a response deadline of November 13, 2026. This opportunity falls under NAICS code 332312 and is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Millwright & Industrial Machinery InstallationThis subcontract opportunity is for millwright and industrial machinery installation services to support prime contractors on projects for the Santa Clara Valley Water District. The scope of work involves the precision installation, alignment, and maintenance of industrial machinery, specifically focusing on heavy machinery installation and the precision leveling of rotating equipment utilizing industrial hoisting and rigging tools. Eligible contractors must possess a valid California State Contractor's License and maintain DIR Registration to qualify for the work. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Industrial Mechanical Maintenance & RepairThe Industrial Mechanical Maintenance and Repair subcontract involves providing on-call utility maintenance, troubleshooting, and repair services for prime contractors working on Santa Clara Valley Water District projects. The scope of work includes performing routine inspections, adjusting utility appurtenances, troubleshooting mechanical failures, and providing emergency dispatch support to ensure utility systems and equipment are fully restored and functioning. Eligible contractors must possess a valid California State Contractor's License and maintain DIR Registration. This opportunity is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California, with a response deadline set for November 13, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

On-Call Mechanical Maintenance Services

Solicitation # VW0737

The Santa Clara Valley Water District (Valley Water) is soliciting bids under solicitation VW0737 for on-call mechanical maintenance services. The selected contractor will provide as-needed utility maintenance, troubleshooting, repair, fabrication, like-for-like replacement, restoration, inspection, adjustment, and emergency dispatch support to preserve and restore existing utility systems. This is a public works contract that excludes general building maintenance, staff augmentation, and the creation or expansion of assets beyond their existing intended function. Work is authorized through individual task orders issued by the Project Manager, with specific schedules and locations defined within each order. The contract will be awarded to the lowest responsive and responsible bidder. Responsiveness is based on following all directions and submitting all required documentation, while responsibility is determined by the bidder's experience, resources, safety record, and past performance with public entities. Bidders must provide hourly rates for labor classifications including foremen, journeyman mechanics, welders, millwrights, and fabricators. Required submittals include a bid bond of at least 10 percent of the proposal amount, a non-collusion declaration, and a contractor safety qualification packet. The successful bidder must provide performance and payment bonds totaling 100 percent of the awarded contract amount within ten calendar days of the notice of award. Compliance with California Labor Code is mandatory, including the payment of general prevailing wage rates, adherence to workers' compensation requirements, and the prohibition of wage kickbacks. Contractors must maintain payroll records for four years following the notice of completion and acceptance. All work must be performed in a professional, code-compliant manner and is subject to review and acceptance by Valley Water based on the authorized task order scope and applicable industry standards. Bids must be submitted electronically via the PlanetBids portal by the specified deadline.

POSTED

DEADLINE

Generator and Transfer Switch Installation

Solicitation # VW0732

Solicitation VW0732, issued by the Santa Clara Valley Water District, is a lump sum public works contract for the installation of a district-furnished 25 KVA permanent standby generator and a 100A automatic transfer switch at the Bailey Avenue Line Valve Vault. The scope of work includes all labor, materials, and supervision for concrete pad work, equipment mounting, trenching, raceway systems, and the installation of a security fence and locked enclosure. A critical technical requirement is the integration of the system into the District's SCADA system to provide remote start capabilities and status and alarm notifications for operations staff. The project also requires the contractor to handle generator permitting and provide comprehensive project documentation, including as-built drawings and final closeout records. The contract will be awarded to the lowest responsive and responsible bidder based on the Grand Total Bid Price. Bidders must submit a bid bond of at least 10 percent of the total proposal and, if successful, provide performance and payment bonds for 100 percent of the contract value. Compliance with California prevailing wage rates, OSHA regulations, and NEC standards is mandatory. Additionally, bidders must demonstrate a good faith effort to include DGS-certified small businesses and provide a conflict of interest disclosure. The project involves a rigorous inspection process, including preliminary and final inspections by Valley Water to verify that workmanship meets industry standards and all functional requirements are met through testing and commissioning.

POSTED

DEADLINE

Metal Seated Ball Valve SupplierThis subcontract agreement involves the supply of industrial metal seated ball valves for prime contractors working on Valley Water system projects. The selected supplier is responsible for the manufacture and delivery of four 14-inch metal seated ball valves, each equipped with handwheel operators. To ensure quality and safety, all equipment must adhere to ASME B16.5 flange standards and ASME B16.34 general valve standards. Additionally, the valves must hold NSF 61 and NSF 372 certifications. This procurement is managed by the Purchasing Services Unit of the Santa Clara Valley Water District in California, with a response deadline set for November 12, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS