Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Concrete Slab and Backfill Construction

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the excavation, preparation, and placement of a new slab on grade along with associated backfill operations, encompassing all necessary labor, materials, equipment, and debris disposal. The work is classified under NAICS code 238110, which corresponds to foundation, structure, and building exterior contractors, indicating a focus on specialized construction activities related to concrete foundations. The project is structured as a subcontract with no specific set-aside provisions, and it is issued by the Engineering organization based in New York, though exact location details for performance or contact information are not provided. All proposals must be submitted by the deadline of August 18, 2026, at 6:30 PM, with the solicitation published on July 16, 2026, providing a roughly five-week window for response. The contract does not include a solicitation number or point of contact, suggesting that all communications and submissions must be handled through the designated online portal at the provided link. The scope requires full execution of site preparation, including grading, formwork, reinforcing, pouring, curing, and subsequent backfilling, with responsibility for removing and disposing of all excavated material and construction debris. Contractors must be prepared to deliver complete turnkey services with no additional support expected from the requesting entity beyond contract terms.

General Info

Excavation, slab placement, and backfilling with full turnkey services due August 18, 2026.

Agency

New York → EngineeringView Agency

NAICS

238110 - Poured Concrete Foundation and Structure ContractorsView NAICS

Place of Performance

NY, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNew York → Engineering
ContactsNo contacts available
OfficeN/A
Organization / Agency
New York → Engineering
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Excavation, preparation, and placement of a new slab on grade with backfill operations, including labor, materials, equipment, and debris disposal.

Similar Contracts

Same NAICS industry code

NAICS: 238110
New
SLED
Deaerator (DA) and Condensate System UpgradesThe Port of Seattle’s Aviation Project Management Group is forecasting a project to replace the Deaerator and Condensate tanks in the Central Mechanical Plant, aiming to modernize critical infrastructure supporting plant operations. The work falls under NAICS code 238110, indicating it involves specialized plumbing and HVAC system upgrades, and will require a contractor capable of handling complex mechanical system replacements in an active industrial environment. The project is currently in the pre-solicitation phase, with no formal solicitation number assigned yet, but interested parties are encouraged to monitor the official portal for updates. Point of contact for inquiries is Leila Gonzalez-Rigatto, with Matthew Piccolo listed as the Project Manager, both reachable via the Port of Seattle’s email and phone system. The place of performance is centered at the Central Mechanical Plant, though specific address details are not provided, suggesting the location is already known to stakeholders within the Port. There is no set-aside classification indicated, meaning the contract is open to all eligible contractors without preference for small businesses or other designations. The posting date of July 2026 signals this opportunity will be formally released in the near future, allowing potential bidders time to prepare proposals, coordinate site visits, and ensure compliance with operational and safety requirements of working in a high-traffic port facility. Prospective contractors should prepare for stringent coordination with port operations to minimize disruptions during installation and decommissioning phases.
Aviation Project Management Group

POSTED

about 11 hours ago

DEADLINE

N/A
View Details

More opportunities from New York → Engineering

Same awarding agency

NAICS: 562910
New
SLED
Hazardous Material Handling and DisposalThis contract involves the identification, containment, and proper disposal of hazardous materials, with a primary focus on asbestos, during demolition or renovation activities. The work must be conducted in strict compliance with environmental and safety regulations to ensure the protection of workers, the public, and the surrounding environment. The subcontract is tied to projects within New York and requires specialized expertise in handling regulated substances, including adherence to protocols for detection, isolation, removal, packaging, labeling, and transport of hazardous waste to authorized disposal facilities. The contract is categorized under NAICS code 562910, which corresponds to remediation services, indicating the nature of the work is environmental remediation rather than general construction. The solicitation was posted on July 16, 2026, with a response deadline of August 18, 2026, by 6:30 PM, allowing potential bidders a limited window to prepare and submit proposals. Although no set-aside information or specific point of contact is provided, the location of performance is implied to be within New York, and bidders must be prepared to meet all state and federal regulatory requirements for hazardous material handling. The contract is structured as a subcontract, meaning the successful bidder will operate under a prime contractor or larger project framework.
Remediation Services

POSTED

5 days ago

DEADLINE

in 29 days
View Details
NAICS: 238120
New
SLED
BID Madison Irving Parking Garage RepairsThe contract involves structural steel, concrete, and drainage repairs at the Madison Irving Parking Garage in Syracuse, New York, under solicitation number 27-066, with a response deadline of August 18, 2026. The work requires full compliance with construction specifications, including the furnishing and installation of materials and systems as defined in the Contract Documents, with strict adherence to quality standards such as AISC 360, SDI QA/QC, ASTM A706, ASTM C94, and the 2025 Building Code of New York State. Inspections will be conducted on-site by an Approved Agency appointed by the City of Syracuse, with the contractor responsible for scheduling, providing test results, correcting deficiencies, and bearing the cost of retesting. Key deliverables include product data, shop drawings, certified payrolls, record drawings, operation and maintenance manuals, and coordination drawings, all of which must be submitted and approved before final acceptance or payment. The contract includes two defined allowances: $45,000 for slab on grade removal and replacement and $35,000 for pipe replacement, with an estimated total value of $80,000, though other line items such as steel painting and bolt replacement are quantified but not priced, leaving the final contract value subject to bid submissions. Proposals must be submitted in hard copy, sealed in an envelope, and delivered physically to the City of Syracuse’s Division of Purchase; electronic submissions are not permitted. All bidders must comply with affirmative action requirements for Minority-Owned, Women-Owned, and Service-Disabled Veteran-Owned Business Enterprises, with participation triggering mandatory Good Faith Effort reporting and certified payroll submissions under New York State Labor Law §220-a, including proof of OSHA 10-hour training. The procurement is under NAICS code 238120 and administered by the City of Syracuse’s Engineering department, with Ian Brown as the primary point of contact. No formal FAR clauses, evaluation factors with weighting, payment office details, or packaging and marking requirements are specified in the documentation, and no named COR, COTR, or PCO are identified.
Structural Steel and Precast Concrete Contractors

POSTED

5 days ago

DEADLINE

in 29 days
View Details