Construction of Leo Valencia Road and NM 150 Intersection

Taos County, New Mexico, issued solicitation ITB 2025-01 for the construction of the Leo Valencia Road and NM 150 Intersection. The project scope encompasses comprehensive roadway improvements, including roadway grading, subgrade compaction, hot mix asphalt paving, concrete curbing and gutter, and the installation of slope drains, drop inlets, and cross drains. Additional requirements include cliffside stabilization, slope protection wire mesh, permanent signing, traffic control management, and adherence to SWPPP regulations. All work must comply with 2019 NMDOT Standard Specifications and applicable local, state, and federal laws. The contract is awarded based on the Lowest Price Technically Acceptable (LPTA) criteria to a responsible bidder. Performance is scheduled for completion within 120 calendar days from the Notice to Proceed, with substantial completion expected by day 90. Delays in substantial completion are subject to liquidated damages of 500 dollars per day. The contractor is responsible for all site inspections and testing, including ensuring earthwork reaches 95 percent maximum density per ASTM D-1557 and concrete achieves a minimum compressive strength of 4,000 PSI. Bids were required to be submitted electronically by December 6, 2024, including mandatory certifications for resident veteran status, non-collusion affidavits, and campaign contribution disclosures.