This Government Contract opportunity from Department Of Defense was posted on July 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Control Panels and Local Control Systems Integration

Closed

Federal

Submission Closed07/20/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332320

SBIR / STTR

Ruggedized Electronics and Instrument PackagingThis subcontract, issued by the NASA SBIR/STTR Program, focuses on the design and fabrication of aerospace-grade electronic interfaces and ruggedized enclosures. The primary objective is to develop hardware capable of maintaining reliable operation within the demanding conditions of dynamic flight environments. The opportunity is designated as a Total Small Business Set-Aside, specifically targeting firms with fewer than 500 employees under the SBIR/STTR mandate. Performance for this contract is centered in Cleveland, Ohio, under NAICS code 332320.

NASA SBIR/STTR Program

POSTED

DEADLINE

Electromechanical Controller Supply (Hoist Controller)This subcontract, issued by the Defense Logistics Agency under the Department of Defense, concerns the supply of a precision electromechanical hoist controller identified by NSN 6110015351641. The procurement is managed under CLIN 2818 and falls under NAICS code 332320. The contractor is required to ensure full compliance with all specified technical requirements, as well as strict adherence to packaging and marking standards. The contract was posted on August 17, 2026, and is associated with the award record SPE7LX21D0081.

Defense Logistics Agency

POSTED

DEADLINE

Precision Machined Bracket FabricationThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture of 62 precision-machined military brackets. The project requires strict adherence to technical specifications, quality assurance, and comprehensive traceability to ensure successful integration into defense systems. The contract is categorized under NAICS code 332320 and was posted on August 17, 2026. It focuses on high-precision fabrication standards necessary for military-grade hardware, emphasizing the critical nature of the components for defense applications.

Defense Logistics Agency

POSTED

DEADLINE

Traffic Signage and Wayfinding

Jamaica Social Investment Fund

POSTED

DEADLINE

Aircraft Stiffener SupplyThe contract pertains to the manufacture and supply of aircraft structural stiffeners as specified in the contract deliverables and CLINs, under a subcontract arrangement issued by the Defense Logistics Agency through the Department of Defense. The work is classified under NAICS code 332320, which aligns with aircraft parts and auxiliary equipment manufacturing, indicating the technical nature of the components to be produced. The contract was posted on August 5, 2026, and is administratively linked to the award number SPE4AX24D9408 with delivery order SPE4AX26F329E and contract number 87, indicating it is part of a broader procurement effort. While no specific place of performance or point of contact is provided, the scope implies direct support to defense aviation systems, with production requirements aligned to stringent military specifications. The contract does not specify a set-aside type, suggesting it is open to any qualified contractor.

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Fluid System Duct AssemblyThe contract entails the fabrication and assembly of fluid system ducts for aircraft, covering critical components such as air conditioning, fuel, and hydraulic lines, all constructed from corrosion-resistant materials to ensure durability under extreme operational conditions. Precision welding techniques are required to meet stringent aerospace standards, ensuring leak-proof, high-integrity connections that maintain system reliability in demanding environments. The work is classified under NAICS code 332320, indicating a focus on aerospace product and part manufacturing, and is structured as a subcontract under the Department of Defense’s Defense Logistics Agency. Performance is expected to align with military and industry specifications for safety, quality, and material compliance, though the exact location of performance and point of contact are not specified. The solicitation was posted on August 5, 2026, and is linked to award S4AX26F329F under the base contract SPE4AX24D9408.

Defense Logistics Agency

POSTED

DEADLINE

Component Manufacturing for P/N: 56220-000The contract is for the production of high-value components or sub-assemblies associated with part number 56220-000, involving precision machining, sheet metal fabrication, or structural assembly processes. It is categorized as a subcontract under the NAICS code 332320, indicating it falls within the scope of forgings and stampings manufacturing. The work is being managed by the Defense Logistics Agency under the Department of Defense, with the solicitation posted on August 4, 2026. While specific performance location details are not provided, the contract is tied to a defense-related logistical framework and requires adherence to high-quality standards typical of military-grade component manufacturing. The contract number and delivery information are accessible through the DIBBS system, ensuring traceability and compliance within DoD procurement channels.

Defense Logistics Agency

POSTED

DEADLINE

Precision Electrical Connector Manufacturing & SupplyThe contract involves the manufacture and supply of four precision electrical coupling nuts identified by NSN 5935016536928, aligned with military specifications MS3186G and MIL-DTL-26482J, ensuring compliance with rigorous defense standards for performance and durability. These components are critical for reliable electrical connectivity in military systems and must meet exacting tolerances and material requirements dictated by the referenced military standards. The contract is structured as a subcontract under the broader procurement framework managed by the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 332320 indicating classification under other electronic component manufacturing. The award was posted on August 3, 2026, and the place of performance and specific delivery location are not designated beyond the overarching agency jurisdiction. The contract is administered through the DLA’s electronic procurement system, with the official record accessible via the provided DIBBS link, ensuring transparency and traceability in fulfillment and delivery.

Defense Logistics Agency

POSTED

DEADLINE

Road Signage and Safety MarkingsThe contract involves the fabrication and installation of traffic signs and safety markings as part of a road rehabilitation project under the Rural Agricultural Development Authority, which is an agency of the Government of Jamaica. The work is classified under NAICS code 332320, indicating it is a subcontract related to metal fabrication for transportation equipment and signage. The contract was posted on August 3, 2026, and is intended to enhance road safety through the proper placement of regulatory, warning, and guidance signs along the rehabilitated roadway, ensuring compliance with traffic control standards. While specific performance locations and point of contact details are not provided, the scope clearly focuses on delivering durable, high-visibility safety infrastructure to support improved transportation conditions in rural areas.

Rural Agricultural Development Authority

POSTED

DEADLINE

Welding and Metal Fabrication ServicesThe contract entails the structural welding and metal fabrication of housings and brackets specifically designed for damper units, utilizing TIG and MIG welding techniques to ensure precision and durability. Post-weld finishing will be performed to meet required mechanical and surface standards, ensuring the final components are fit for high-performance applications within demanding operational environments. The work falls under NAICS code 332320, classifying it as metal fabrication services, and is structured as a subcontract under the Department of Defense through the Defense Logistics Agency. The solicitation was posted on July 21, 2026, with no set-aside designation specified, indicating it is open to all qualified contractors. Performance location details are not provided, and no point of contact information is listed, but the contract is accessible via the DIBBS portal under identification SPE4A626P9869. The nature of the work suggests the need for certified welders with experience in aerospace or defense-grade metal assembly, and compliance with military or industrial quality standards is implied through the contract's association with the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of Aircraft Rib and Stiffener ComponentsThe contract entails the precision machining, forming, and assembly of structural aircraft components, specifically ribs and stiffeners made from metal alloys, identified by NSN 1560-01-726-0639. These parts are critical to airframe integrity and must meet exacting aerospace standards for dimension, material composition, and finish. The work falls under NAICS code 332320, indicating it is a specialty machining and metal fabrication task performed under a subcontract arrangement, though the prime contractor or direct customer is not specified. The contract was posted on July 21, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. While no specific performance location or point of contact is provided, the components are intended for military aircraft systems and must comply with all applicable defense quality and delivery requirements. The absence of a set-aside designation suggests the opportunity is open to all qualified vendors, and the associated award reference number is SPE4A625PU828.

Defense Logistics Agency

POSTED

DEADLINE

Precision Machining and Truss Assembly FabricationThe contract for Precision Machining and Truss Assembly Fabrication encompasses the manufacture of critical truss components through precision CNC machining, welding, heat treatment, and final assembly, all performed to stringent aerospace and military specifications. The work is subcontracted under the Department of Defense, with the Defense Logistics Agency as the overseeing organization, ensuring compliance with defense-grade quality and performance standards. The North American Industry Classification System code 332320 confirms the nature of the work as metal forging and stamping, with an emphasis on precision fabrication for defense applications. Performance of the contract is expected to occur under the regulatory framework of federal defense procurement, though specific location details are not provided. The solicitation was posted in July 2026 and is identified by the contract number SPE4A726P5566, indicating it is part of a larger defense acquisition initiative. The components produced will be integral to structural systems requiring high reliability, dimensional accuracy, and material integrity under extreme operational conditions.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

N/A

AI Contract Overview

The contract entails the supply and installation of local control panels integrated into main operational systems, including all necessary control cabling and comprehensive logic verification to ensure seamless functionality. This work is scoped as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it is classified under NAICS code 332320, which covers industrial and commercial machinery and equipment manufacturing. The project is managed by the Department of Defense through the W071 Endist Seattle office, with performance required at a location in Bridgeport. All work must be completed and submitted by the response deadline of July 20, 2026, following the solicitation posted on July 6, 2026. The contract emphasizes technical precision in system integration and verification, requiring qualified vendors to deliver fully operational and reliably connected local control systems within the specified timeframe.