Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Cooled LWIR Focal Plane Array (FPA) Detector Supply

Active

International

Response Deadline08/26/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Research Council of Canada is seeking a subcontract for the supply of a high-reliability, cooled Long Wave Infrared Focal Plane Array detector. The required hardware must feature a 320 by 160 resolution, a spectral range between 7.5 and 12.4 microns, and a radiometric performance of less than 35 nW per square centimeter steradian centimeter. Additionally, the detector must demonstrate a mean time between failures exceeding 30,000 hours. This procurement opportunity was posted on August 11, 2026, with a response deadline of August 26, 2026. The contract falls under NAICS code 334418 and is managed by the Government of Canada. Interested parties can find further details through the CanadaBuys portal.

General Info

NRC seeks subcontract for high-reliability cooled Long Wave Infrared Focal Plane Array detector.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

This scope was carved out of 26-58108.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Long-Wave Infrared Hyperspectral Imaging System for Defence and Dual-Use Applications Using Remotely Piloted Aircraft Systems

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 11

subcontract

Response DeadlineAug 26

Submission deadline

Response Deadline

08/26/2026, 07:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a high-reliability, cooled LWIR FPA detector with 320×160 resolution, >30,000-hour MTBF, 7.5–12.4 µm spectral range, and radiometric performance <35 nW/(cm²·sr·cm⁻¹).

Similar Contracts

Same NAICS industry code

Control Unit Development and IntegrationTexas A&M University is seeking a subcontractor for the Control Unit Development and Integration project. The scope of work involves the design and supply of electronic control units specifically for syringe pump systems, encompassing the development of embedded controllers, user interfaces, and necessary communication protocols. The solicitation was posted on August 14, 2026, with a response deadline of August 28, 2026. This procurement falls under NAICS code 334418 and is managed through the Texas SmartBuy system.

Texas A&M University

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-26-Q-1393

This contract is for the procurement of one circuit card assembly, identified by NSN 5998-01-582-4437. This is a restricted source item designated as a critical application item, requiring engineering source approval by the government design control activity. The delivery is required within 212 days after order, with the destination and acceptance point located at the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must adhere to strict technical and quality requirements, including the prohibition of intentionally added mercury and compliance with covered defense information standards. Extensive packaging specifications are mandated to prevent electrostatic discharge and electromagnetic interference, requiring the use of DOD qualified materials and approved work stations. All marking and palletization must follow MIL-STD-129 and DLA packaging requirements to ensure the physical protection of leads and terminals.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Industrial Input Devices SupplyThe NASA Shared Services Center is seeking a subcontractor for the supply of waterproof mini-keyboards and waterproof mice specifically designed for use in industrial CNC environments. This procurement falls under NAICS code 334418 and is managed by the National Aeronautics And Space Administration. The solicitation was posted on August 14, 2026, with a response deadline set for August 19, 2026, at 8:30 PM. Interested parties can find further details and submission guidelines through the provided government workspace link.

NASA Shared Services Center

POSTED

DEADLINE

Back-Illuminated CMOS Image Sensor FabricationThe National Aeronautics And Space Administration, through the NASA Shared Services Center, is seeking a subcontract for the full fabrication of six science-grade back-illuminated CMOS image sensors, specifically the CIS115 model. The scope of work encompasses comprehensive wafer processing, thinning, and the optimization of backside illumination, as well as the application of an anti-reflection coating to ensure high-performance imaging capabilities. This procurement falls under NAICS code 334418 and was posted on August 14, 2026. Interested parties must submit their responses by the deadline of August 19, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Counterfeit Parts Detection and PreventionThis subcontract opportunity with the Department of Defense, specifically NSWC Crane, focuses on the implementation of a comprehensive counterfeit electronic parts prevention program. The project requires adherence to SAE AS5553A and related standards to ensure the integrity of replacement components through rigorous inspection, traceability, and supplier vetting processes. The contract is designated as a total Small Business Set Aside under NAICS code 334418. Performance will take place in Crane, Indiana, with a response deadline of August 27, 2026.

POSTED

DEADLINE

Electronics & Semiconductor Packaging IntegrationThis subcontract, managed by the Department of Energy through Triad, focuses on the integration of hydrogen getter materials into semiconductor and sensor packaging. The primary objective is to protect these components from hydrogen exposure, which can lead to signal degradation, embrittlement, and overall device failure. The project is based in Los Alamos, New Mexico, and falls under NAICS code 334418. Interested parties must submit their responses by November 15, 2026, following the posting date of August 14, 2026.

Triad - DOE Contractor

POSTED

DEADLINE

Circuit Card Assembly (CCA) ManufacturingThis subcontract opportunity with the Department of Defense, specifically the DLA Aviation office in Oklahoma City, involves the full turnkey manufacturing of circuit card assemblies. The scope of work encompasses the entire production lifecycle, including component sourcing, PCB fabrication, SMT or through-hole assembly, soldering, and final testing. The project is categorized under NAICS code 334418. Interested parties must submit their responses by the deadline of September 15, 2026, following the posting date of August 14, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Component and Subassembly SupplyThis subcontract, managed by the Department of Defense through DLA Aviation at Oklahoma City, focuses on the procurement of critical and long-lead electronic components essential for power supply unit assembly. The scope of work emphasizes the necessity of obsolescence mitigation and strict adherence to military specifications to ensure full traceability and reliability of all supplied parts. The opportunity was posted on August 14, 2026, with a response deadline of August 22, 2026. Classified under NAICS code 334418, the contract seeks a supplier capable of meeting rigorous defense standards for electronic subassemblies to support ongoing aviation power systems.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Electronic Assembly and Soldering Services (Class 3)This subcontract for Electronic Assembly and Soldering Services, issued by the Department of Defense through DLA Aviation At Huntsville, focuses on the high-reliability assembly of coaxial delay lines. The work must adhere to ANSI/J-STD-001 Class 3 standards and encompasses critical processes including inspection, rework, and the implementation of ESD-safe handling procedures. The opportunity falls under NAICS code 334418 and was posted on August 14, 2026. Interested parties must submit their responses by the deadline of September 14, 2026.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Digital Display and Technology SupplyThe City of Santa Ana in California has issued a subcontract for the Digital Display and Technology Supply project. This contract focuses on the procurement, supply, and configuration of LED displays, media players, content management systems, and remote monitoring technology. The project is categorized under NAICS code 334418 and is scheduled for posting on August 14, 2026. All performance activities related to the installation and configuration of these technology systems will take place within Santa Ana, California, specifically in the 92705 zip code area.

City of Santa Ana

POSTED

DEADLINE

Supply of Male N-Type Coaxial Connectors for 7/8" Foil CoaxNashville Electric Service is seeking a subcontract for the supply of 10 male N-type RF connectors designed for 7/8 inch foil-shielded radiating coaxial cable. The required components must feature a 50 ohm impedance, an IP68 rating, and a brass body with a tin-over-nickel finish, supporting a maximum frequency of 3.7 GHz. Acceptable hardware includes the COMMSCOP R5PNM or an approved equivalent. The procurement was posted on August 14, 2026, with a response deadline of August 20, 2026. The place of performance is located in Nashville, Tennessee, and the contract falls under NAICS code 334418. Interested parties can find further details and submission guidelines through the official vendor portal.

Nashville Electric Service

POSTED

DEADLINE

Supply of Female N-Type Coaxial Connectors for 7/8" Foil CoaxNashville Electric Service is seeking a subcontract for the supply of 12 female N-type RF connectors designed for 7/8 inch radiating coaxial cable with foil shielding. The required components must feature a 50 ohm impedance, an IP68 rating, and a brass body with a tin-over-nickel finish, supporting a maximum frequency of 3.7 GHz. Acceptable parts include the COMMSCOP R5PNF or an approved equivalent. The procurement is categorized under NAICS code 334418 and will be performed in Nashville. Interested parties must submit their responses by the deadline of August 20, 2026, at 7:00 PM UTC.

Nashville Electric Service

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Uninterruptible Power Supply (UPS) Unit Supply and DeliveryThe National Research Council of Canada is seeking a subcontractor for the procurement and delivery of one Uninterruptible Power Supply (UPS) unit. This equipment is required to maintain continuous power operations at the NRC facility located in Boucherville, Quebec, and must adhere to all provided technical specifications and delivery requirements. The solicitation was posted on August 14, 2026, with a response deadline of September 7, 2026. This opportunity falls under NAICS code 335313 and is managed by the Government of Canada.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Benchtop X-ray Diffractometer

Solicitation # 26-58091

The National Research Council of Canada is soliciting a benchtop X-ray diffractometer (XRD) for use at its Mississauga Research Center to support advanced materials and chemical science research, with a requirement that the system analyze powder, small crystal, thin film, and metallic samples. The instrument must be a fully integrated, plug-and-play benchtop unit with all components—including the X-ray generator and goniometer—housed in a single enclosure, capable of operating in both reflection and transmission modes, and able to automatically recognize and identify installed optical components and sample stages. The system must be easily reconfigurable with minimal realignment, designed for integration into automated workflows, and delivered within 20 weeks of contract award. The procurement follows a Lowest Price Technically Acceptable (LPTA) methodology, where bidders must meet all mandatory technical criteria outlined in Annex F before price becomes the deciding factor; only technically compliant proposals are eligible for award, with no trade-offs permitted between cost and performance. The contract value is not pre-established, and pricing is to be submitted by offerors in a lump sum for the primary instrument, along with optional items such as additional units and extended warranties. The successful bidder must provide full system integration, including a database license (COD or ICDD PDF-4/PDF-5), an uninterruptible power supply, and all necessary hardware, firmware, and software. Delivery must occur at 2620 Speakman Drive, Mississauga, Ontario, under DAP Incoterms® 2020, with Canada retaining the right to inspect the equipment at the contractor’s facility or upon delivery, and a 30-day acceptance window following delivery. All equipment must comply with Canadian Electrical Code Part 1, Radiation Safety Codes, and be certified by a Standards Council of Canada-accredited body. Packaging must prioritize reusable, recyclable, or returnable materials under Green Procurement Policy guidelines, and each shipment must be clearly labeled with quantity, part number, description, contract number, and procurement billing number. Contractors must hold Canadian citizenship or be a Canadian supplier under reciprocal procurement rules, and personnel may require CONFIDENTIAL to TOP SECRET security clearances based on access to classified material. Proposals must be submitted electronically by August 17, 2026, in separate, non-zipped files not exceeding 10MB, including technical and financial offers along with mandatory declaration forms certifying compliance with integrity, employment equity, international sanctions, and anti-forced labor

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Uninterruptible Power Supply (UPS)

Solicitation # 26-58072

The National Research Council Canada has issued a Request for Proposal under solicitation number 26-58072 for the procurement of one Uninterruptible Power Supply. This open tendering process is governed by the Canadian Free Trade Agreement and the Policy on Reciprocal Procurement, restricting eligibility exclusively to Canadian suppliers or partners. The successful bidder will be selected based on the lowest price offered, with all deliverables required to be received by November 30, 2026. Interested parties must submit their tenders to the NRC Bid Receiving Unit by September 7, 2026, at 14:00 EDT. Submissions are accepted in either of Canada's official languages. The procurement is being managed by Senior Procurement Officer Frédérik Beauchamp, and the delivery of the equipment is designated for Canada.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Refurbishment of the CTA Curtain Wall

Solicitation # 26-58095

The National Research Council Canada is seeking a qualified supplier to dismantle and store the existing sunshade system on the East side of the Aluminum Technology Center at 501 University Boulevard East in Saguenay, Quebec, in preparation for replacing the insulated glass and spandrel panels on both the East and North façades. The work aims to restore watertightness and enhance thermal insulation of the curtain wall system. Interested bidders are required to attend one of two mandatory site visits scheduled for July 17th, 2026 at 9:00 a.m. EDT or August 4th, 2026 at 10:00 a.m. EDT, with all attendees required to bring valid photo identification and comply with full personal protective equipment standards, including safety glasses, hard hats, high-visibility vests, and safety footwear; failure to comply will result in denied access. Tenders must be submitted electronically to the NRC Bid Receiving Unit by the deadline of August 13th, 2026 at 7:00 p.m. EDT. All documentation may be submitted in either English or French, and the procurement is subject to the federally administered Integrity Regime. Bidders are solely responsible for regularly checking the Government Electronic Tendering Service for amendments, inquiries, and responses, as no direct notifications will be issued. The contract is classified under NAICS code 238150 and is open to all eligible suppliers, with encouragement for Indigenous businesses to register in the Indigenous Business Directory to access set-aside opportunities under the Procurement Strategy for Indigenous Businesses.

Glass and Glazing Contractors

POSTED

DEADLINE

Shipping, Packaging, and Logistics

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Heating and Temperature Control System Integration

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Precision Roller Fabrication and Coating

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Custom Electro-Mechanical System Design and Integration

POSTED

DEADLINE

Waste Disposal and Recycling Services

Materials Recovery Facilities

POSTED

DEADLINE

in about 1 month

HVAC Parts and Consumables Supply

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

HVAC Reporting and Documentation Services

Other Management Consulting Services

POSTED

DEADLINE

in about 1 month

Corrective HVAC Repair Services

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month