Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Copper Alloy Pipe-to-Tube Adapter Fabrication

Active

Federal

Response Deadline09/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of straight pipe-to-tube adapters using copper alloy material for prime contractors supporting Maritime Supply Chain ESOC Buys projects. The technical requirements specify a transition from 3/8 inch standard water tube size with a 1/2 inch outer diameter to a 3/8 inch nominal pipe size. All components must be produced using traditional manufacturing processes, as additive manufacturing is strictly prohibited. The project is managed under the Department of Defense with performance taking place in Newport News, Virginia. Interested parties must respond to the solicitation by September 25, 2026, under NAICS code 332710. The final deliverable consists of finished straight adapters meeting the specified material and dimensional standards.

General Info

Fabricate copper alloy pipe-to-tube adapters for DoD projects in Newport News, Virginia.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

NEWPORT NEWS, VA, 23607-2734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M0-26-T-083N.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ADAPTER, STRAIGHT, PI

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 25

Submission deadline

Response Deadline

09/25/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures straight adapters for prime contractors on MARITIME SUPPLY CHAIN ESOC BUYS projects. Fabricates adapters from copper alloy material transitioning 3/8 inch standard water tube size (1/2 inch O.D. tube) to 3/8 inch nominal pipe size. Uses traditional manufacturing processes; additive manufacturing is prohibited. Delivers finished straight pipe-to-tube adapters.

Similar Contracts

Same NAICS industry code

Wideband Satcom AAU Lifting Adapter Fabrication

Navair Warfare Ctr Aircraft Division

POSTED

about 2 hours ago

DEADLINE

Specialized Component Manufacturing

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Manufacturing of Mixer Assembly (NSN 1560012584386)This subcontract involves the manufacture and assembly of two Mixer Assemblies (NSN 1560012584386) for prime contractors on Department of Defense projects. The production must strictly adhere to Basic Drawing NR 78286 70400-02287 Revision C and associated reference drawings SS8442 Rev 6, 70400-02287 Rev G, and 70009-03001 Rev T. All units must be produced using precision machining tools, as additive manufacturing is explicitly prohibited. The project is managed under the ASC Supplier OE and AF Div of the Department of Defense and is classified under NAICS code 332710. Compliance with DFARS 252.223-7008 and Export Control regulations is mandatory. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline of September 22, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Additive Manufacturing (3D Printing) of Valve ComponentsThis subcontract involves the production of valve stems using industrial metal additive manufacturing for prime contractors supporting DLA Distribution San Joaquin. The selected provider will utilize 3D printing processes to deliver fluid valve stems and the necessary validation data required for acceptability evaluations conducted by the Engineering Support Activity. The project is based in Tracy, California, under NAICS code 332710. Due to the nature of the defense work, the contractor must maintain strict ITAR and EAR compliance and hold a CMMC Level 2 certification. All deliverables must meet the specific technical standards required for ESA approval.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

Precision Machining: Elbow, Boss (F/A-18 Application)This subcontract involves the precision machining of Elbow and Boss components for F/A-18 applications, supporting prime contractors for DLA Land and Maritime aerospace parts. The project requires the production of 20 machined units using Type 304 Stainless Steel, utilizing CNC milling and turning to achieve specific female and male threads along with a detonating cord groove. The manufacturer must be capable of producing Navy Identified Critical Safety Items to strict aerospace tolerances. This work is managed by the Fluid Handling Division of the Department of Defense and is to be performed in San Diego, California.

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

Manufacturing of NSN 2510-01-582-7952This subcontract involves the manufacture of three specialized hardware components, specifically NSN 2510-01-582-7952, for the Department of Defense under Land Supplier Operations Vehicle Support. Production must adhere to Reference Drawing 19207 12420325 Revision L and requires the use of precision machining equipment. The contractor is responsible for performing a First Article Test and ensuring strict compliance with DFARS 252.223-7008 regarding Hexavalent Chromium, as well as following MIL-STD-129 marking requirements. The project falls under NAICS code 332710 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

Actuator Shaft Assembly ManufacturerThis subcontract involves the manufacture and supply of 10 actuator shaft assemblies for prime contractors supporting Department of Defense supply contracts. The work requires precision machining and assembly using CNC machines and lathes to ensure all components meet specific technical data package tolerances. To maintain high standards of production, the manufacturer must implement a quality inspection system that is fully compliant with ISO 9001:2015. The contract is managed by the ASC Supplier Oper AE and AF Division under NAICS code 332710, with the place of performance located in New Cumberland. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Mechanical Puller Fabrication and SupplyThis subcontract for Mechanical Puller Fabrication and Supply involves the manufacture or sourcing of completed mechanical pullers for prime contractors supporting the Department of Defense ASC Commodities Division. The contractor must adhere to the DLA Master List of Technical and Quality Requirements RA001 and ensure all items are packaged according to RP001 DLA Packaging Requirements. Quality sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331 Table 1, and the provider must maintain compliance with DFARS 252.204-7016. The project falls under NAICS code 332710 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026. The final deliverable is a finished, sampled, and packaged mechanical puller that meets all specified technical and regulatory standards.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Bell Cranks (NSN 3040011085345)This subcontract involves the supply of 11 Bell Cranks for prime contractors under Defense Logistics Agency supply contracts. The provider is responsible for manufacturing or sourcing parts according to NSN 3040011085345 technical data while ensuring strict compliance with RA001 quality requirements. All items must be packaged according to MIL-STD-2073-1E and RP001, with marking performed per MIL-STD-129. Delivery is set as FOB Origin, with the place of performance located in New Cumberland, Pennsylvania. The contract falls under NAICS code 332710 and is managed by the Department of Defense Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Bare Item Marking and Physical Identification ServicesThis subcontract opportunity with the ASC Commodities Division of the Department of Defense involves providing specialized physical identification and bare item marking services for prime contractors. The selected provider will apply permanent markings to aircraft components using chemical etching, stamping, or industrial laser etching, ensuring all work adheres to specification RQ017. All marked items must be delivered in a state ready for First Article Testing and government inspection. The project is designated as a Total Small Business Set-Aside under NAICS code 332710 and will be performed at Hill AFB. Interested parties must submit their responses by September 22, 2026, following the posting date of September 14, 2026.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Valve Disk Guides (NSN 4820-01-315-4114)This subcontract involves the manufacture and supply of 109 valve disk guides for prime contractors supporting the Department of Defense Nuclear Reactor Program. The contractor is responsible for producing or sourcing hardware that adheres to the technical specifications of NSN 4820-01-315-4114 using precision machining equipment. All items must be packaged according to RP001 DLA Packaging Requirements for Procurement to ensure compliance with agency standards. The project falls under NAICS code 332710 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026. This agreement ensures the delivery of critical components to the Defense Logistics Agency for use in nuclear reactor systems.

NUCLEAR REACTOR PROGRAM

POSTED

about 21 hours ago

DEADLINE

Rigid Connecting Link FabricationThis subcontract involves the precision machining and fabrication of 29 rigid connecting links for prime contractors supporting DLA Aviation supply contracts. The manufacturer is required to use aviation-grade alloys to meet the technical specifications for NSN 3040014328239, ensuring full compliance with aviation quality standards and domestic origin requirements. Managed by the Department of Defense under the ASC Supplier Oper OEM Division, the project falls under NAICS code 332710. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Supply of Fixed Film Resistors (NSN 5905012421017)This subcontract involves the procurement or manufacture of one fixed film resistor identified by NSN 5905012421017 to support prime contractors delivering DLA supply contracts. The project is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, with performance taking place at Robins AFB. All deliverables must strictly adhere to the RP001 DLA Packaging Requirements for Procurement. The contract falls under NAICS code 334413, with a response deadline set for September 25, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Copper Alloy Raw Material SupplyThis subcontract, titled Copper Alloy Raw Material Supply, is issued by the Department of Defense under the Maritime Supply Chain ESOC Buys program. The primary objective is to source and deliver raw copper alloy stock that meets specific metallurgical requirements for maritime water tube applications. To ensure quality and compliance, the supplier must provide comprehensive material certifications and Mill Test Reports to verify the alloy composition of all delivered materials. The performance of this contract is centered in Newport News, Virginia. Interested parties must respond by September 25, 2026, in accordance with the solicitation posted on September 14, 2026. The procurement falls under NAICS code 423510, focusing on the supply of raw materials to prime contractors supporting maritime infrastructure.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Electrical Connector JackscrewsThis subcontract involves the manufacture or sourcing of a specialized electrical connector jackscrew, part number 70182989856, to support prime contractors delivering for DLA Land and Maritime supply contracts. The provider is responsible for delivering one unit FOB Destination to Ellsworth AFB, ensuring all packaging and marking adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. Additionally, the supplier must provide Safety Data Sheets in compliance with 29 CFR 1910.1200(g) if necessary. Managed by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, the contract falls under NAICS code 335999. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Sediment Strainer (NSN 4730015021966)This subcontract involves the supply of one sediment strainer for prime contractors supporting DLA Land and Maritime supply contracts. The required item is Cleveland Gear Company, Inc. part number 0303HD-S0401211, which corresponds to national stock number 4730015021966. The Department of Defense, specifically the Maritime Supply Chain ESOC Buys agency, is overseeing the procurement under NAICS code 423840. The selected provider must package the item according to RP001 DLA Packaging Requirements for Procurement and ensure delivery of the physical strainer within five days of the order. The contract was posted on September 14, 2026, with a response deadline of September 25, 2026, and the place of performance is designated as FPO 09573.

Industrial Supplies Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

O-Ring Supply (NSN 5331-01-584-1057)This subcontract under the Department of Defense for Maritime Supply Chain ESOC Buys requires the procurement of 300 O-rings identified by NSN 5331-01-584-1057. The items must be manufactured or sourced according to MIL-DTL-117, Type II, Class C, Style 1 specifications, with a strict prohibition on the use of mercury or Class I Ozone Depleting Chemicals. The contractor is responsible for ensuring all units meet identification marking standards per MIL-STD-130N and packaging requirements per MIL-STD-129 and MIL-STD-2073-1E. Delivery is set as FOB Origin, with the place of performance located in Portsmouth, zip code 03801-5000. The solicitation is categorized under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Fueling Manifold Manufacturer/SupplierThis subcontract involves the fabrication and supply of one Fueling Manifold for prime contractors supporting Maritime Supply Chain ESOC Buys projects under the Department of Defense. The manufacturer must produce the manifold according to NSN 015490858 and the DLA Master List of Technical and Quality Requirements, utilizing either additive manufacturing or precision machining. All items must be marked in compliance with MIL-STD-129 before final delivery. The project is categorized under NAICS code 332999 and is to be performed in Fort Hood, Texas. Interested parties must submit their responses by September 25, 2026, following the solicitation posted on September 14, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-STD-129 and ASTM D3951 Packaging ServicesThis subcontract for the Department of Defense, specifically the Maritime Supply Chain ESOC Buys, requires the provision of military-grade packaging, marking, and labeling services for prime contractors delivering DLA Land and Maritime supply contracts. The service provider is responsible for packaging items according to ASTM D3951, marking and labeling per MIL-STD-129, and palletizing according to RP001. Additionally, the contractor must apply hazard warning labels per 29 CFR 1910.1200 when required and utilize specialized labeling equipment to ensure full compliance. The performance of these services will take place at Fort Sam Houston, Texas. This opportunity falls under NAICS code 488510 and was posted on September 14, 2026, with a response deadline of September 25, 2026. The final deliverable consists of the finished, labeled, and palletized components ready for delivery.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Supply of Tube Elbows (NSN 4730-01-062-5202)This subcontract involves the manufacture or sourcing of one tube elbow component, identified by NSN 4730-01-062-5202, to support prime contractors delivering for the Department of Defense Maritime Supply Chain ESOC Buys. The supplier must ensure the component meets all technical specifications and perform the work at Fort Sam Houston. Eligible providers must maintain an active SAM registration and strictly adhere to FAR 52.204-24 and DFARS 252.204-7016 regulations concerning telecommunications equipment. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Hose Clamp Supply (NSN 4730013299142)This subcontract with the Department of Defense for Maritime Supply Chain ESOC Buys involves the supply of two hose clamps under NSN 4730013299142. The contractor is required to use wrap material JA and adhere to specific packaging and marking standards, including RP001, MIL-STD-2073-1E, and MIL-STD-129. The agreement mandates compliance with RA001 DLA Technical and Quality Requirements and 29 CFR 1910.1200 regarding hazardous materials. Delivery of the packaged and marked units is set as FOB Origin, with the solicitation process concluding on September 25, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Sediment Strainer Element (NSN 4730-01-198-9613)This subcontract involves the supply of one sediment strainer element, part number S13-46764 and NSN 4730-01-198-9613, manufactured by Parker-Hannifin Corporation. The item is intended for prime contractors fulfilling DLA supply contracts and must be delivered FOB Origin to San Diego. The contractor must adhere to strict quality and compliance standards, including marking per MIL-STD-129, packaging per MIL-STD-2073-1E and RP001, and sampling per MIL-STD-1916. Additionally, the provider is required to maintain a quality system compliant with SAE AS9003 or ISO 9001. This requirement is issued by the Department of Defense under the Maritime Supply Chain ESOC Buys.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Quick Disconnect Coupling Half (NSN 4730-01-667-2832)This subcontract involves the procurement or manufacture of a quick-disconnect coupling half, identified by NSN 4730-01-667-2832, to support prime contractors delivering DLA Land and Maritime supply contracts. The Department of Defense, specifically the Maritime Supply Chain ESOC Buys, requires the delivery of one unit to the Yuma Proving Ground in Arizona. The contractor must adhere to specific packaging and labeling standards, utilizing ASTM D3951 for packaging and RP001 DLA Packaging Requirements for Procurement for palletization. Additionally, domestic material disclosure is required for any non-domestic items provided under this agreement. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026, under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Tube Tees (NSN 4730-01-569-9732)This subcontract involves the supply of tube tees, specifically part NSN 4730-01-569-9732, for prime contractors supporting DLA Land and Maritime supply contracts. The selected provider is responsible for manufacturing or sourcing the components and ensuring that all packaging and palletization strictly adhere to RP001 DLA Packaging Requirements for Procurement. The scope of work requires the delivery of five units of Tube Tee, with a focus on ensuring the Unit Container/Pack meets all purchase order specifications. This project is managed under the Department of Defense through the Maritime Supply Chain ESOC Buys agency, with performance taking place in Mesa, Arizona.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS