Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Marking for Naval Electronics

Active

Federal

Response Deadline11/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled MIL-SPEC Packaging and Marking for Naval Electronics, involves providing specialized packaging and marking services for prime contractors supporting DLA supply contracts for the USS George H W Bush CVN 77. The scope of work focuses on the preparation of electronic filters, requiring strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. To ensure the integrity of the components, the contractor must utilize military-specification materials, including anti-static, moisture-barrier, and shock-absorbent packaging. Managed by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, the contract falls under NAICS code 488410. The final deliverables must be fully packaged and marked shipments ready for government transportation to an FPO AE destination. The solicitation was posted on October 30, 2026, with a response deadline of November 4, 2026.

General Info

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

NAICS

488410 - Motor Vehicle Towing

Place of Performance

FPO, AE, 09513, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M0-26-T-070W.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FILTER ASSEMBLY, ELE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 30

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and marking for prime contractors delivering DLA supply contracts for the USS George H W Bush CVN 77. Packages electronic filters per MIL-STD-2073-1E and marks shipments per MIL-STD-129 for FPO AE destination. Utilizes anti-static, moisture-barrier, and shock-absorbent MIL-SPEC materials. Delivers fully packaged and marked shipments ready for government transportation.

Similar Contracts

Same NAICS industry code

Industrial Machinery Rigging and InstallationThis subcontract for Industrial Machinery Rigging and Installation involves the offloading, positioning, and leveling of a CNC Wire EDM machine for prime contractors working on Texas A&M University System STEM Education Center projects. The scope of work includes unloading the equipment from the delivery vehicle, transporting it to the final installation site using industrial skates and heavy-duty forklifts, and performing precision leveling and anchoring to ensure the machine is ready for utility connection. The opportunity is categorized under NAICS code 488410 and was posted on October 30, 2026, with a response deadline of November 13, 2026. Interested parties can find further details through the Texas SmartBuy portal under solicitation TAMUS-ITB-27-0551.

Texas A&M University System

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and UID Marking ServicesThis subcontract opportunity is for the provision of specialized packaging and marking services supporting aircraft engine projects for the DLA Weapons Support ASC. The selected contractor will be responsible for executing packaging according to MIL-STD-2073-1E, shipment marking per MIL-STD-129, and Unique Item Identification using laser or permanent etching equipment in compliance with MIL-STD-130. The final deliverable consists of fully packaged and marked seals that are ready for destination delivery. The project is designated as a Total Small Business Set-Aside under NAICS code 488410 and is managed by the Department of Defense. Interested parties must submit their responses by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized packaging and marking services for the Department of Defense under the DLA Weapons Support Land Supply Chain. The scope of work requires the contractor to package seven torsion springs in strict accordance with MIL-STD-2073-1E standards, specifically utilizing QUP:001, PRES MTHD:10, and CLNG/DRY:1. Additionally, the contractor must apply all necessary marking and labeling per MIL-STD-129 using industrial marking equipment and military-specification preservatives. The project is categorized under NAICS code 488410 and will be performed in Greensboro, North Carolina. Interested parties must note the response deadline of November 13, 2026, for this specific requirement to deliver fully processed shipments for prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Military Grade Packaging and Labeling ServicesThis subcontract for Military Grade Packaging and Labeling Services involves providing specialized preservation, packaging, and marking for sensitive electronic equipment supporting Navsup Weapon Systems Support projects. The contractor is responsible for ensuring all units are preserved according to MIL-STD-2073-1 and labeled in compliance with MIL-STD-129 and MIL-STD-130, which includes the application of Unique Item Identification. To fulfill these requirements, the provider must utilize MIL-SPEC packaging materials and specialized UID marking equipment. The specific scope of work concludes with the delivery of three packaged DKU00E units prepared for shipment to MAPAC. This effort falls under NAICS code 488410 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

Aviation Component Packaging and Preservation ServicesThis subcontract for Aviation Component Packaging and Preservation Services supports prime contractors on USCG Aviation Logistics Center projects under the Department of Homeland Security. The scope of work involves providing specialized packaging and preservation services for Tube Assemblies, specifically applying corrosion-inhibiting materials and protection methods designed to ensure components remain viable during one year of warehouse storage. The contractor must utilize approved aviation-grade materials and is strictly prohibited from using popcorn, shredded paper, Styrofoam, or peanut packaging. This opportunity is designated as a total Small Business Set Aside under NAICS code 488410, with a response deadline of November 10, 2026.

Aviation Logistics Center (ALC)(00038)

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of the Navy's NAVSUP Weapon Systems Support. The selected provider will be responsible for the final packaging and marking of assemblies to ensure they are ship-ready, strictly adhering to MIL-STD-2073-1 for packaging and MIL-STD-129 for marking. Specific requirements include the application of DLR labeling and red LEVEL 1 markings, necessitating the use of industrial marking equipment and approved MIL-SPEC materials. The work is to be performed in Mechanicsburg, Pennsylvania, under NAICS code 488410. Interested parties must submit their responses by November 30, 2026, to meet the requirements of the agency.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Department of the Navy, specifically Navsup Weapon Systems Support Mech, involves providing military-grade packaging and physical identification marking for repaired electronic units. The contractor is responsible for ensuring all units are fully marked and packaged for government shipment, adhering strictly to MIL-STD-129, REV R for markings and MIL-STD-2073 for packaging. To support domestic and overseas shipping levels, the work requires the use of industrial marking equipment and ESD-safe shielding. The project is categorized under NAICS code 488410 and will be performed in Mechanicsburg, Pennsylvania. Interested parties should note that the response deadline is November 30, 2026. The primary objective is to deliver repaired units that meet all rigorous military specifications for safe and compliant transport.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Crating ServicesThis subcontract for MIL-SPEC Packaging and Crating Services supports prime contractors on projects for the Department of the Navy's Navsup Weapon Systems Support. The scope of work involves providing specialized packaging and labeling for control panels to ensure they are ready for government shipment. All activities must strictly adhere to MIL-STD-2073 for packaging and MIL-STD-129 for labeling, with a specific focus on using MIL-SPEC crates and Electrostatic Discharge materials to protect sensitive electronic equipment during transit. The project is categorized under NAICS code 488410 and will be performed in Philadelphia, Pennsylvania. Interested parties should note that the solicitation was posted on October 30, 2026, with a response deadline set for November 30, 2026.

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in about 1 month

MIL-STD Packaging and Marking ServicesThis SBA set-aside subcontract involves providing specialized military packaging and labeling services for the Department of the Navy's Navsup Weapon Systems Support Mech. The contractor is responsible for the preservation and packaging of 85 units of precision hardware, specifically identified as removable cones, ensuring all work adheres to MIL-STD-2073-1 for packaging and MIL-STD-129 for marking. The scope of work requires the use of MIL-SPEC cushioning and moisture barriers to ensure hardware integrity for destination delivery. The project will be performed in Mechanicsburg, Pennsylvania, under NAICS code 488410. Interested parties must submit their responses by November 30, 2026, following the solicitation posted on October 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Crating ServicesThis subcontract for MIL-SPEC Packaging and Crating Services supports the Department of the Navy's Navsup Weapon Systems Support Mech. The contractor is responsible for providing specialized packaging for repaired rotary compressors intended for prime contractors. All work must be performed in Mechanicsburg, Pennsylvania, ensuring that assets are securely packaged and labeled for shipment. Compliance with strict military and international standards is mandatory, specifically MIL-STD-2073-1 and ASTM D3951-18. The scope of work includes applying DLR labeling and utilizing ISPM 15 compliant heat-treated wood packaging, which requires formal certification for military shipping. The response deadline for this opportunity is November 6, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

MIL-STD-2073 Packaging for Aircraft ComponentsThis subcontract involves providing specialized military-grade packaging services for aircraft actuators to support prime contractors delivering on DLA supply contracts. The primary objective is to ensure that Critical Safety Items are packaged and labeled in strict accordance with MIL-STD-2073 standards to prevent corrosion or damage during transit. All work must utilize approved materials to ensure components are shipment-ready. The project is managed by the Department of the Navy through the Pa DLA Aviation At Philadelphia office, with performance taking place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, and the classification under NAICS code 488410.

Pa DLA Aviation At Philadelphia

POSTED

about 23 hours ago

DEADLINE

Specialized Defense Packaging and Marking ServicesThe Specialized Defense Packaging and Marking Services subcontract involves providing final packaging, marking, and shipment preparation for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all markings adhere to MIL-STD-129 and that packaging follows RP001 DLA Packaging Requirements using compliant industrial materials. Additionally, the contractor is responsible for preparing all necessary hazardous material documentation to ensure components are shipment-ready and capable of passing DLA inspection. This opportunity is categorized under NAICS code 488410 and is associated with the Department of Defense. Performance of the contract will take place in Silverdale, Washington. Interested parties should note the response deadline of November 9, 2026, for this specific defense logistics requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Manufacture and Supply of Electronic Filter Assemblies (NSN 5915-01-686-4765)This subcontract involves the manufacture and supply of 23 electronic filter assemblies, identified by NSN 5915-01-686-4765, for prime contractors supporting DLA supply contracts for the USS George H W Bush CVN 77. The Department of Defense requires all assemblies to be fabricated in strict accordance with the DLA Master List of Technical and Quality Requirements. Compliance with the Berry Amendment for domestic sourcing is mandatory, and the selected provider must maintain an active SAM registration. Notably, the use of additive manufacturing is strictly prohibited for this project. The contract falls under NAICS code 334419 and is managed through the Maritime Supply Chain ESOC Buys.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

FILTER ASSEMBLY, ELE

Solicitation # SPE7M0-26-T-070W

Solicitation SPE7M0-26-T-070W is issued by the Defense Logistics Agency for the procurement of one Filter Assembly, ELE, identified by NSN 5915-01-686-4765. The requirement is categorized under NAICS code 334419. The delivery is specified for the USS George H W Bush CVN 77 in FPO AE 09513, with a required delivery date of November 5, 2024. While the primary quantity is listed as one unit, procurement history indicates a potential volume of 23 units at a unit price of 1,796.00 dollars, totaling 41,308.00 dollars. Offers must be submitted based on FOB Origin, and parts produced using additive manufacturing processes are strictly prohibited. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and mandatory registration in the System for Award Management. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, the prohibition of covered defense telecommunications equipment, and the handling of hazardous materials.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Nonmetallic Hoses (NSN 4720-01-610-7162)This subcontract involves the supply of 20 nonmetallic hoses for prime contractors supporting DLA Land and Maritime supply contracts. The contractor is responsible for manufacturing or sourcing items that strictly adhere to NSN 4720016107162, with packaging completed according to MIL-STD-2073-1E and RP001 DLA Packaging Requirements. Eligible providers must hold Small Business certification and be capable of delivering the units via FOB Origin within a five-day turnaround. The performance of this contract is centered in Chesapeake, Virginia, under the oversight of the Department of Defense Maritime Supply Chain ESOC Buys.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Supply of Nickel-Copper Alloy StockThis subcontract involves the supply of raw Nickel-Copper alloy stock, provided as certified bars or tubing, to prime contractors supporting DLA Land and Maritime supply contracts. The materials are specifically intended for the machining of pump shaft sleeves and must meet strict maritime grade specifications. To ensure quality and compliance, the supplier is required to provide Mill Test Reports and material certifications, while adhering to Buy American or Free Trade Agreement requirements. Managed under the Department of Defense through the Maritime Supply Chain ESOC Buys, the contract falls under NAICS code 336413. The raw alloy material is to be delivered directly to the manufacturer, with the place of performance located in New Cumberland. The solicitation was posted on October 29, 2026, with a response deadline of November 3, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Nickel-Copper Alloy Pump Shaft SleevesThis subcontract involves the manufacture and supply of 42 precision-machined pump shaft sleeves, identified by NSN 4320010625720, for prime contractors supporting Department of Defense Maritime Supply Chain ESOC Buys. The components must be fabricated from Nickel-Copper Alloy to a 4-inch overall length using precision CNC lathes and inspection tools, with a strict prohibition on additive manufacturing. All units must undergo Product Verification Testing in accordance with DLAD 46.292 to ensure compliance with DLA Land and Maritime standards. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

DEADLINE

RESTRICTOR UNIT, FLUID

Solicitation # SPE7M0-27-T-0149

Solicitation SPE7M0-27-T-0149 is a request for quotations issued by DLA Land and Maritime for the procurement of one Fluid Flow Restrictor Unit, identified as Fairbanks Morse LLC part number M99013732 and NSN 4730-01-738-3459. The requirement is for the USS Harrisburg LPD-30, with a required delivery date of October 2, 2026, and a delivery lead time of five days after order. Shipping is designated as FOB Origin, with the final freight destination located at Huntington Ingalls Inc. in Gulfport, Mississippi. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List Technical and Quality Requirements and RP001 palletization standards take precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation also mandates compliance with the Buy American Act, the Berry Amendment, and various cybersecurity and hazardous material labeling regulations.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M0-26-T-7042

Solicitation SPE7M0-26-T-7042 is a small business set-aside for the procurement of 42 pump shaft sleeves manufactured from nickel-copper alloy with an overall length of 4 inches. The contract is issued by the DLA Land and Maritime, Maritime Supply Chain ESOC Buys, and specifies a delivery period of 133 days after the order date, with a required delivery date of July 1, 2024. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Key technical and quality requirements include adherence to basic drawing 16236 CS-4320-SV-0781 Revision B and the prohibition of additive manufacturing processes. Product Verification Testing is invoked per DLAD 46.292, requiring the contractor to notify the DCMA QAR 30 days prior to delivery. The contractor must maintain a calibration system meeting ANSI/NCSL Z540-1-1994 or ISO 10012-1 and ensure the manufacturer's inspection system complies with SAE AS9003 or ISO 9001. Additionally, the contract strictly prohibits the intentional use of mercury or class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system.

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

HOSE, NONMETALLIC

Solicitation # SPE7M0-26-T-051B

Solicitation SPE7M0-26-T-051B is a small business set-aside request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 20 nonmetallic hoses under NSN 4720-01-610-7162. The requirement falls under NAICS code 326220. Delivery is required within five days after order, with terms specified as FOB Origin. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and prohibits the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, safeguarding of covered defense information per DFARS 252.204-7012, and prohibitions on additive manufacturing unless specifically authorized.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Supply of Variable Wire Wound Resistors (NSN 5905008063043)This subcontract, managed by the Department of Defense under the Maritime Supply Chain ESOC Buys, involves the procurement of one unit of nonprecision variable wire wound resistors, specifically NSN 5905008063043. The contractor is responsible for sourcing and delivering Bourns Inc part number 3057J-2-203, ensuring that the components meet all DLA Master List technical specifications. The agreement mandates strict adherence to environmental and logistical standards, requiring that all items be free of Class I ozone-depleting substances. Additionally, the delivery must comply with MIL-STD-2073-1E and MIL-STD-129 packaging standards. Performance for this contract is designated for FPO 96694-2900 under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Pump Shaft Sleeve Supplier (NSN 4320-01-123-0197)This subcontract involves the procurement of one Pump Shaft Sleeve to support prime contractors on DLA Land and Maritime supply contracts. The supplier is responsible for sourcing or manufacturing the component to strictly adhere to NSN 4320-01-123-0197 and approved part numbers Curtiss-Wright Electro-Mechanical P/N PL-11530-F-18 ITEM 440 or P/N Y-156D440EX3A. Managed by the Department of Defense under the Maritime Supply Chain ESOC Buys, the contract falls under NAICS code 332510. A critical requirement of this agreement is the expedited delivery of the physical sleeve to Manchester, New Jersey, which must be completed within five days of the order.

Hardware Manufacturing

POSTED

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M0-26-T-9435

Solicitation SPE7M0-26-T-9435 is a Request for Quotations issued by DLA Land and Maritime, Maritime Supply Chain ESOC Buys, for the procurement of one pump shaft sleeve identified by NSN 4320-01-123-0197. Approved part numbers include Curtiss-Wright Electro-Mechanical OUBG9 P/N PL-11530-F-18 Item 440 and P/N Y-156D440EX3A. The requirement falls under NAICS code 333914, with a delivery timeline of five days after receipt of order and shipping terms set as FOB Origin. Delivery is designated for Manchester, New Jersey. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Offerors must submit quotations by June 29, 2026, via the DIBBS system. Key compliance requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

RESISTOR, VARIABLE, W

Solicitation # SPE7M0-26-T-073A

Solicitation SPE7M0-26-T-073A is a fixed-price request for quotation issued by DLA Land and Maritime for one nonprecision wire wound variable resistor, identified by NSN 5905-00-806-3043 and Bourns Inc part number 3057J-2-203. The requirement falls under NAICS code 334416 and specifies a delivery timeline of five days after order. Inspection and acceptance will occur at the destination per FAR 52.246-1. The procurement may be eligible for automated award, and a price evaluation preference is available for HUBZone concerns. The contractor must adhere to strict technical and quality standards, including DLA Master List requirements and the prohibition of Class I ozone-depleting substances in manufacturing unless approved by the contracting officer. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for component lead finish and hazardous material labeling. Offerors proposing alternate parts must provide a complete data package for evaluation, and items produced via additive manufacturing are prohibited. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS