Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CORROSION PREVENTIV

Active
SPE8ES-26-T-2506Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a Type II corrosion preventive compound with part number ETCPRTU-2A3A and NSN 8030-01-722-2723, supplied in 5-gallon units, with a total quantity of one contract unit. The item has a shelf life of 24 months, extendable, as defined under RS058 and marked with special marking code 33. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking standards, and hazardous material shipping procedures as outlined in IP025. All packaging materials and methods are designated as generic or unspecified (ZZ), and palletization must follow DLA guidelines. Delivery is FOB destination with zero tolerance for variance in quantity, and inspection and acceptance occur at the delivery point. The item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with an original required delivery date of October 3, 2026, and a contracted delivery window of 173 days. The solicitation issued under SPE8ES-26-T-2506 incorporates technical and quality requirements from the DLA Master List, and the supplier, Chemeon Surface Technology, LLC, must adhere to all applicable DoD standards as referenced. The contract unit of issue is CN, and transportation logistics must follow DLAD Proc Note C19 and C20.

General Info

Procurement of one 5-gallon unit of Type II corrosion compound, NSN 8030-01-722-2723, FOB destination, delivery to New Cumberland, PA by October 3, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

325520 - Adhesive ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8ES-26-T-2506.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Stephen Ockenhouse
contact@example.gov

Full Description

Show more
CORROSION PREVENTIV
CORROSION PREVENTIVE COMPOUND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
U/I = CN
SIZE: 5 GALLONS
RS058: Shelf life requirement RS001 for a TYPE 2 (CODE 6) item with a shelf life of 24 month (extendable) applies to this item.
CHEMEON SURFACE TECHNOLOGY, LLC 71D40 P/N ETCPRTU-2A3A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017756995 0001 CN 1.000
NSN/MATERIAL:8030017222723
DELIVERY (IN DAYS):0173
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE8ES-26-T-2506
SECTION B
PR: 7017756995 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:10/03/2026
SPE8ES-26-T-2506 NSN/Part Number: 8030-01-722-2723 Quantity: 1 CN Purchase Request: 7017756995QTY: 1 Delivery: 173 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
PRESERVATIVE COATING, R
Solicitation # SPE8ES-26-T-2500
The contract specifies the procurement of Preservative Coating, Rubber under solicitation SPE8ES-26-T-2500, with a requirement for 40 quarts of item NSN 8030-01-314-2213, to be delivered FOB destination within 292 days of contract award. The product must comply with Technical Data Package Rev A Gen 1 per specification MIL-A-52408A and adhere to packaging standards MIL-STD-2073-1E, MIL-STD-129R, and MIL-STD-147F, including marking, palletization, and shipping in accordance with DLA Packaging Requirements. The item has a non-extendable shelf life of 24 months, designated as Type I (Code M), and must be labeled and documented under the revised Hazard Communication Standard (HCS) aligned with the Globally Harmonized System, requiring submission of Safety Data Sheets (SDS) and compliant HCS or CPSA/FHSA labels prior to award, along with employee training on these requirements. All packaging and shipment details must meet IP025 guidelines for hazardous materials, and the delivery address is specified as DLA Dist San Joaquin in Tracy, CA. The contract enforces a zero variance in quantity and requires inspection and acceptance at the destination, with a required ship date of May 31, 2027, and original delivery date of June 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect at the time of solicitation or award.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
CORROSION RESISTANT CO
Solicitation # SPE8ES-26-T-2510
This contract is for a corrosion-resistant coating identified by NSN 8030-01-626-9987 and part number M817061B3B, with a unit of issue of pint cans and a quantity of 20 pints. The coating must comply with MIL-DTL-81706B Revision B dated February 7, 2024, and all packaging, labeling, and marking must adhere to MIL-STD-129R, MIL-STD-2073-1E, and other referenced standards, including the inclusion of lot or batch numbers on labels. The item is subject to a Qualified Products List (QPL) requirement, meaning the manufacturer must be QPL-approved at the time of award. The product has a two-year shelf life classified as Type II, extendable, and must be packaged and marked per DLA packaging requirements, with special marking code 33 for shelf life information. Hazard communication standards under OSHA’s 29 C.F.R. 1910.1200 must be met, requiring submission and prior approval of Safety Data Sheets and compliant labels before contract award, along with employee training on the updated hazard communication system. The item is classified as a hazardous material, requiring compliance with IP025 packaging and shipping protocols. Delivery is FOB destination within 50 days to the specified receiving warehouse in Tracy, California, with zero percent variance allowed on quantity. The required delivery date is November 19, 2026, with a need ship date of April 29, 2026. The contract falls under NAICS code 325520 and is managed by DLA Dist San Joaquin under solicitation SPE8ES-26-T-2510, with technical and quality requirements governed by the DLA Master List applicable as of the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2514
The contract specifies the procurement of an acrylic-based adhesive compliant with SAE Specification AMS-A-8576, dated September 1997, for bonding acrylic plastics. The adhesive is classified as Type II, non-solvent, high viscosity, and must be supplied in 1-pint units containing the base and the required amount of catalyst and promoter. A shelf-life requirement of six months, non-extendable, applies per RS001 for Type I (Code F) items. The item is identified by NSN 8040-00-526-1910 with a quantity of 2 kilotons, subject to delivery within 20 days after order. Packaging must include MIL-STD-129 labeling with the lot or batch number, and applicable DLA packaging requirements are incorporated by reference. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Suppliers must comply with the updated Hazard Communication Standard effective June 1, 2015, requiring submission of Safety Data Sheets (SDS) aligned with 29 C.F.R. 1910.1200, in place of MSDS, for all hazardous materials. Labels must meet OSHA’s revised HCS requirements or applicable CPSA/FHSA standards, and suppliers are responsible for training employees on SDS, labeling, and compliance protocols. The adhesive is subject to Covered Defense Information potentially applying under RD003, necessitating appropriate safeguards. The solicitation number is SPE8ES-26-T-2514, issued August 5, 2026, with responses due August 11, 2026. Delivery is to Fresno, California, and inquiries may be directed to Stephen Ockenhouse of the Defense Logistics Agency via dla-ts-fceb.inquiry@dla.mil. The NAICS code is 325520, reflecting the chemical manufacturing industry, under the Department of Defense.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
PUTTY
Solicitation # SPE8ES-26-T-2513
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
Adhesive Kit Manufacturing and FormulationThe contract focuses on the manufacture and formulation of a two-part adhesive kit consisting of resin and hardener components, fully compliant with military specifications. The work includes the chemical synthesis of both components, precise batching procedures, and rigorous quality control measures to ensure consistency, performance, and reliability under demanding operational conditions. Every phase of production must adhere to strict technical standards to meet the demanding requirements of defense applications, with batch-level testing to verify chemical integrity, curing properties, and environmental resilience. Delivery is targeted to Tinker Air Force Base with a ZIP code of 73145-9156, indicating the primary point of performance for receiving and validating the finished adhesive kits. The solicitation is classified as a subcontract under NAICS code 325520, which pertains to other paint and coating manufacturing, and it was posted on August 4, 2026, with a response deadline of August 10, 2026. The contracting agency is the Department of Defense through DLA Distribution OKC KO CP, and interested parties must submit proposals through the DIBBS portal prior to the deadline to be considered for award.
DLA DIST OKC KO CP

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
Supply of Red Sealing Compound (10 mL, NSN: 8030015650423)The contract is for the procurement of commercial off-the-shelf red sealing compound, supplied in 10 mL units, identified by the National Stock Number 8030015650423, and must comply with all applicable military and hazardous material handling and transportation standards. The requirement is issued under the NAICS code 325520, which pertains to paint and coating manufacturing, indicating the product is a specialized industrial compound used in defense applications. The solicitation is classified as a subcontract and is being managed by the Defense Logistics Agency under the Department of Defense, with performance specified to occur at Eglin Air Force Base, Florida, zip code 32542-6622. The opportunity was posted on August 4, 2026, and responses are due by August 10, 2026, leaving a six-day window for submissions. Interested parties must adhere to all federal and defense-specific regulations governing the packaging, labeling, and shipment of hazardous substances, ensuring full compliance with safety and logistical protocols. The contract can be viewed and responded to through the DIBBS portal using the provided link.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
SEALING COMPOUND
Solicitation # SPE8ES-26-T-2489
The contract calls for the procurement of a sealing compound identified by NSN 8030015650423, with a unit size of 10.00 milliliters and a red color, available under approved part numbers Loctite Corp 05972 P/N 27121 and W.W. Grainger, Inc. 25795 P/N 5A230. The requirement is for two bottles, to be delivered within five days of order placement to a designated destination at Eglin Air Force Base, Florida, under FOB Destination terms with zero variance allowed in quantity. The item is classified as a TYPE I (CODE H) with a non-extendable shelf life of twelve months, and all packaging, marking, and palletization must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 indicating the shelf-life classification. Hazardous material requirements apply under the revised OSHA Hazard Communication Standard, mandating submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200 and corresponding labels prior to award, along with employee training on the updated standards. Inspection and acceptance occur at the destination, governed by FAR 52.246-1 and 52.246-2, and all deliveries must be shipped using traceable means, prohibiting parcel post. This solicitation, issued under DLA Master Solicitation Revision 105, incorporates numerous FAR and DFARS clauses addressing cybersecurity, safety, export control, labor practices, and procurement integrity, including Safeguarding Covered Defense Information, Prohibition of Hexavalent Chromium, and NIST SP 800-171 assessment requirements. Offerors must comply with the System for Award Management representation mandates and submit all required certifications prior to award. Proposals must be submitted via the DIBBS portal by August 10, 2026, and are subject to pass/fail gates: any offer utilizing additive manufacturing is automatically disqualified, and failure to provide the required Safety Data Sheets renders the offer nonresponsible. The contract is not a small business set-aside, and the Berry Amendment and Buy American Act apply. Payment is processed electronically through WAWF, and suppliers are required to validate their SAM representations. The award may be made automatically if no first article test is required, and
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2493
The contract specifies the procurement of a gray/grey solid paste adhesive in 2.8-ounce tubes, identified by NSN 8040-01-685-5306 and part numbers 9367 and RTV157, supplied by MOMENTIVE PERFORMANCE MATERIALS INC. and HUGHES CO INC. The product is classified as a Type I (Code H) item with a non-extendable shelf life of 12 months and must be stored between 60-80 degrees Fahrenheit. Suppliers are required to comply with federal hazard communication standards, submitting Safety Data Sheets and compliant Hazard Communication Standard labels per 29 C.F.R. 1910.1200 prior to award, along with employee training on these requirements. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating Type I shelf life, and palletization must follow DLA packaging requirements. The adhesives are to be shipped FOB destination with no quantity variance permitted, inspected and accepted at delivery point, and transported via traceable means, explicitly prohibiting parcel post. Delivery is scheduled for 20 days from award, with three separate delivery points: USS CARL M. LEVIN, USS FITZGERALD DDG 62, and a third identical delivery to USS FITZGERALD DDG 62, totaling five transport units. All shipments must reference DLA procedures C19 and C20 for transportation and first destination logistics.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2492
The contract pertains to the procurement of an adhesive kit, identified by NSN 8040008589798, consisting of a pint of resin and a two-ounce hardener packaged separately in a single kit under one unit of issue (KT), with a total quantity of one kit. Delivery is required within five calendar days of order placement at Tinker Air Force Base, Oklahoma, under FOB destination terms, meaning the supplier bears all transportation risk and costs until delivery. The kit must be packaged in strict compliance with MIL-STD-2073-1E for preservation and MIL-STD-129R(3) for marking and labeling, including application of the special marking code 32 to indicate Type I shelf-life status. Packaging options include an E6 box for full kits, a heavy-weight plastic bag (heat-shrink, heat-sealed, or blister packed) for kits under 32 fl. oz., or for can-based kits, bonding via adhesive disk or heat-shrink with bonding properties to create a singular entity. Each kit must be cushioned to prevent movement, contain an itemized contents list, and if multiple boxes are used, each must be clearly marked as part of a set (1 of 2, etc.). Preservation must follow the hybrid method (HM), cleaning/drying as CLNG/DRY:1, with storage below 80.6°F (TOS Code Z), and the item has a mandatory non-extendable 12-month shelf life. Hazardous materials requirements mandate submission of Safety Data Sheets (SDS) compliant with 29 CFR 1910.1200 prior to award, along with OSHA-compliant labels or those meeting CPSA/FHSA standards. Supplier employees must be trained on the updated Hazard Communication Standard. Packaging for hazardous components requires use of 4G boxes, with all markings and barcoding conforming to MIL-STD-129 including Data Matrix or Code 128 for NSN, lot number, and expiration date. Shipment must avoid parcel post and use the fastest traceable means, with delivery addressed to Tinker AFB. The contract includes clauses requiring compliance with cybersecurity safeguards (252.204-7012), NIST SP 800-171, trafficking prevention, employment eligibility verification, sustainable products, and whistleblower rights. Offerors must have a valid UEI and CAGE code
DLA DIST OKC KO CP

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2469
This contract is for the procurement of an adhesive kit identified by NSN 8040008589798, consisting of a pint of resin and two ounces of hardener packaged separately in a single kit, with a total order quantity of three kits. The items must be delivered within five days of order placement, FOB destination, at specified delivery points including Hill Air Force Base, Utah, and Tinker Air Force Base, Oklahoma, with strict requirements to avoid parcel post and use only traceable freight methods. Packaging must comply with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, including a special shelf-life code 32 designating a non-extendable Type I shelf life of 12 months. Kits must be contained in one primary box with adequate cushioning and dunnage to prevent movement or damage, and an itemized contents list must be included. Four packaging options are permitted depending on kit size and container type, ranging from E6 boxes to adhesive-bonded or heat-shrink secured cans. All packaging must adhere to DLA Packaging Requirements RP001 for palletization and labeling, with temperature storage conditions strictly limited to below 80.6°F. Hazard communication standards under 29 CFR 1910.1200 require submission of approved Safety Data Sheets (SDS) and OSHA-compliant labels prior to award, along with employee training on hazard communication protocols. The product does not contain radioactive materials, but hazardous material handling requirements still apply, including compliance with IP025 standards for shipping hazardous items. Contract administration requires electronic invoicing through WAWF and adherence to all applicable FAR and DFARS clauses, including safeguarding covered defense information, prohibiting trafficking and forced labor, and ensuring employment eligibility verification. The solicitation is for a fixed-price contract with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract does not specify unit prices or total value, and award basis is not explicitly defined, although automated award may apply. Offerors must be registered in SAM, possess a valid UEI and CAGE code, and comply with socioeconomic and small business representation requirements. All submissions must be made electronically via DIBBS by the stated deadline, and contractual obligations flow down to subcontractors, including cybersecurity and transportation requirements.
DLA DIST OKC KO CP

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 325520
New
DIBBS
Adhesive Supply (NSN 8040000922816)The contract entails the supply of one box of adhesive identified by NSN 8040000922816, ensuring full compliance with all applicable federal or military specifications for performance, quality, and safety. Delivery is specified as FOB destination, meaning the vendor is responsible for all transportation costs and risks until the item reaches a government-designated location, which is not publicly detailed in the provided data. The contract is structured as a subcontract under the NAICS code 325520, indicating the involvement of manufacturing or processing of adhesives and sealants, and is managed by the Defense Logistics Agency under the Department of Defense. The posting date of August 3, 2026, suggests this is a forward-looking procurement, and while no solicitation number is listed, the referenced contract and delivery identifiers point to an active and tracked transaction within the DLA system.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details