Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

COVERALLS

Active
SPMYM226Q7948Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, numbered SPMYM226Q7948, is a Small Business Set Aside for COVERALLS issued by the Department of Defense through DLA Maritime - Puget Sound, with performance located in Bremerton, Washington. All submissions must be made electronically via the SAM.gov website and received by Tuesday, August 11, 2026, at 7:00 AM PST. Bidders are required to provide complete and signed solicitation documents via email to William.M.Moriwaki@dla.mil for their quote to be considered responsive. Offers must be quoted FOB Destination Bremerton, WA, with clear lead times and delivery dates provided. Contractors must submit accurate contractor information including CAGE code, point of contact details, manufacturer name and country of origin, and must verify compliance with applicable representation clauses in Sections K.52.204-24 and K.52.209-11. Contract execution requires adherence to all instructions on Page 1 including signing boxes 30a, b, and c. If the solicitation requires implementation of NIST SP 800-171, the contractor must possess a current assessment within the last three years as mandated by DFARS 252.204-7019, unless a shorter timeframe is specified. Commercial Off The Shelf items are exempt from this requirement but must be clearly identified and documented during the bid submission process. The NAICS code is 315990, indicating the opportunity is targeted toward small businesses in the apparel manufacturing sector. All responses must fully comply with the submission guidelines outlined in the solicitation, and failure to meet any requirement may result in disqualification. The contracting officer reserves the right to evaluate all submissions based on responsiveness, compliance, and adherence to stated terms.

General Info

Small business set aside for coveralls, FOB Bremerton, WA, submissions due August 11, 2026, via SAM.gov.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

315990 - Apparel Accessories and Other Apparel ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SBA

Documents

(3)

Additional Data Document B - Coveralls Specifications NIIN LLS050137

PDFspecifications

Solicitation SPMYM226Q7948 for Coveralls

PDFifb

Additional Data Document 61917904 - Coverall Specifications

PDFspecifications

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / Agency
Department Of Defense → DLA Maritime - Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5000, USA
Contacts

Full Description

Show more

THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV


ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.


To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)



**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement.  Must identify and provide information to contracting officer on bid during solicitation period**



  Please read the contract in its entirety.



  If you are able to provide a quote be sure to provide the following information in the sections provided below:



  1. Page 1 BLK 17a. Provide Contractor's info and cage code.
  2. Section A. A1 – 1. Enter The Contractor's POC
  3. Section B. – Enter your Quote and any other info we should know.
  4. Please quote FOB Destination BREMERTON, WA.
  5. Section B. K21 – Check the appropriate box and provide the Manufacturer’s Name, Address and the Country of Manufacturing
  6. Section F. –  Provide the Lead Time and/or Delivery Date.
  7. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes
  8. Section K. - 52.209-11 (b)(1) and (2) Check the applicable boxes
  9. Page 1 -  Read box 28 and sign boxes 30 a, b, and c.
  10. Return the signed and filled out solicitation with your quote by TUESDAY AUGUST 11, 2026 @ 7:00 AM PST


FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.



EMAIL:  William.M.Moriwaki@dla.mil

Similar Contracts

Same NAICS industry code

NAICS: 315990
New
DIBBS
LIFE PRESERVER, VEST
Solicitation # SPE8E6-26-Q-0624
The contract specifies the procurement of 18 commercial MK-1 life preserver vests, with a quantity of eight units for one delivery point and ten units for another, all identified by NSN 4220-01-487-3206 under solicitation SPE8E6-26-Q-0624. The vests must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and are subject to a firm fixed price with zero variance allowed in quantity. Delivery is required within 60 days after award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. The vests must include a 1.5-inch by 1.5-inch nylon loop tape patch on the left shoulder for temporary attachment of a distress marker light, and all accessories—distress marker light, sea dye marker, and flat whistle—must be secured with 1/16-inch nylon cords of minimum 90-pound tensile strength using bowline knots, with specific cord lengths per item. Mercury and mercury-containing compounds are prohibited unless exempted for specified functional components like batteries or instruments, in which case secondary containment and shockproof design are mandatory per NAVSEA 5100-003D. The contract applies to delivery to U.S. Navy and Marine Corps vessels and aviation units located in Norfolk, Virginia, and Iwakuni, Japan, with transportation governed by DLAD procedural notes. Only approved manufacturers—Switlik Parachute Company, Mustang Survival, and Naval Group Hellas—are authorized to supply the vests using designated part numbers. A Certificate of Quality Compliance is required, and the items are classified as critical application items due to their lifesaving function.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 4 days
View Details
NAICS: 315990
New
Federal
USMS FY26 D35 DEPUTY GEAR
Solicitation # 15M10226QA4700229
The U.S. Marshals Service is seeking small businesses to supply standardized duty gear under solicitation 15M10226QA4700229, amended to extend the response deadline to August 12, 2026, at noon CST. This is a total small business set-aside under NAICS code 315990, with no brand-name specifications allowed and no technical substitutions permitted. Offerors must be registered in SAM.gov, hold a valid CAGE code, and submit two volumes: Volume 1 must be a quote on official company letterhead including contact details and the CAGE code, and Volume 2 must be a fully completed, signed SF-1449 form with pricing entered on the CLINs and the USMS-0004 clause filled in. All submissions must be emailed to Jennifer.Brite@usdoj.gov with the RFQ number in the subject line; failure to comply renders the proposal non-responsive. The gear includes black waterproof boots at least six inches tall, modular duty belts with MOLLE capability, tactical load-bearing vests color-matched to current body armor, and uniforms with reflective USMS lettering, all to meet internal USMS Technical Standard Operating Procedure 2.7. Performance is to occur in Shreveport, Louisiana, and the government will perform inspection and acceptance based on these specifications. No contract value is disclosed, and no formal evaluation factors, weights, or award methodology are stated, though the strict compliance requirements and absence of trade-off criteria suggest a lowest price technically acceptable approach. No packaging, invoicing, payment, or contract administration details are provided beyond the submission format and SAM registration requirement.
Department Of Justice US Marshal Service

POSTED

about 8 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 326220
New
Federal
HOSE, NONMETALLIC
Solicitation # SPMYM226Q7929
This solicitation seeks quotes for NONMETALLIC HOSE under solicitation number SPMYM226Q7929, issued by the Department of Defense through DLA Maritime - Puget Sound in Bremerton, WA, and is exclusively set aside for SBA Certified Women-Owned Small Businesses under the WOSB Sole Source Program. All submissions must be made electronically via SAM.gov, and contractors must ensure their responses are complete and signed, including detailed information such as contractor name, CAGE code, point of contact, quotation details, manufacturer information with country of origin, lead time, and delivery date, all FOB Destination Bremerton, WA. Compliance with specific sections of the solicitation form is required, including certifications under 52.204-24 and 52.209-11, and signatures on designated boxes, with the completed solicitation returned via email to karl.lindley@dla.mil by Sunday, 28 September 2025 at 7 AM. Contractors must ensure they have a current NIST SP 800-171 security assessment, unless the product qualifies as Commercial Off The Shelf (COTS), in which case they must explicitly identify it and provide supporting documentation during bidding. The solicitation is open for responses through SAM.gov and the deadline for submission is 2026-08-11 at 7:00 PM. The NAICS code associated with this procurement is 326220, indicating the item falls under plastic packaging and containers manufacturing. Only responses that are fully completed, signed, and submitted via the specified email will be considered responsive. All relevant details, including place of performance and point of contact, are centered on the DLA Maritime office in Bremerton, Washington.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 332813
New
Federal
Precision Titanium Component ManufacturingThe contract pertains to the precision manufacture of titanium connectors part number 1381013-104, fabricated to meet stringent military specifications ensuring material integrity, dimensional precision, and reliable performance under demanding marine and industrial environments. All components must be accompanied by full material certification and undergo rigorous quality controls to confirm compliance with technical and performance standards, with production to be carried out at the designated performance location in Bremerton, Washington, under a small business set aside designation. The solicitation is structured as a subcontract under the NAICS code 332813 and is administered by the Department of Defense through DLA Maritime - Puget Sound. Responses must be submitted by 3:00 PM Eastern Time on August 12, 2026, with eligibility restricted to qualified small businesses as defined by the SBA. The award will support critical defense infrastructure requiring high-strength, corrosion-resistant titanium components, underscoring the importance of adherence to exacting standards throughout fabrication, inspection, and delivery. All work must be performed at the specified location, and the contractor is expected to demonstrate proven capability in producing military-grade titanium parts under similar regulatory and operational conditions.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

1 day ago

DEADLINE

in 2 days
View Details