Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Crestron DM-Based AV over IP (AVoIP) System Installation and Integration

Active

Federal

Response Deadline07/20/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the installation and integration of a Crestron DM NVX-based AV over IP system to upgrade the audiovisual infrastructure in the Wing Operations Center located at Malmstrom AFB, Montana. The project focuses on replacing legacy AV equipment with a modern, network-based solution that enables efficient signal distribution over existing IP networks, enhancing reliability, scalability, and remote manageability. The system must be fully integrated into the current operational environment to support mission-critical visual and audio communication needs without disruption to ongoing activities. This is a total small business set-aside subcontract under NAICS code 541330, meaning only small business concerns are eligible to bid. The solicitation was posted on July 10, 2026, with a response deadline of July 20, 2026, at 6:00 PM. The work is being procured by the Department of Defense through the FA4626 341 Cons Lgc office, and performance is restricted to the specified location at Malmstrom AFB with a ZIP code of 59402. Contractors must possess technical expertise in Crestron DM NVX systems, networked AV architecture, and defense facility compliance standards to successfully fulfill the requirements.

General Info

Install Crestron DM NVX AV over IP system at Malmstrom AFB under small business set-aside.

Agency

Department Of Defense → FA4626 341 Cons LgcView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Malmstrom AFB, MT, 59402, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 10

subcontract

Response DeadlineJul 20

Submission deadline

Response Deadline

07/20/2026, 06:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4626 341 Cons Lgc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4626 341 Cons Lgc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Install and integrate a Crestron DM NVX-based AVoIP system to modernize the Wing Operations Center’s AV infrastructure for network-based signal distribution.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking Construction Management services through an Indefinite-Delivery, Indefinite-Quantity contract to support the planning, design, construction, and closeout phases of its major construction projects. This includes working on projects delivered via Design Build, Progressive Design Build, and other alternative delivery methods, ensuring adherence to authorized schedules, budgets, and quality standards. The scope encompasses comprehensive CM services tailored to the evolving needs of Port infrastructure initiatives, with the contractor expected to provide expert oversight and coordination throughout all project lifecycles. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. The solicitation is posted under NAICS code 541330, which classifies the services as architectural, engineering, and related services. The contract is forecasted for release in July 2026, and all performance will occur at locations associated with Port of Seattle facilities, though specific sites have not been defined at this stage. Potential vendors should prepare to respond to future solicitations through the Port’s official procurement portal.

Construction Management

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks qualified providers to perform independent inspection of battery shipments to ensure full compliance with packaging, labeling, and defect-free standards, utilizing either MIL-STD-1916 or ASQ H1331 sampling methodologies. Inspections must verify that all batteries meet rigorous military and quality assurance criteria before release or delivery, with inspection results documenting conformity and identifying nonconformances. The work is intended as a subcontract and falls under the NAICS code 541330 for scientific and technical consulting services, positioning the provider as a technical partner in maintaining supply chain integrity. The solicitation is issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a deadline for responses set for August 6, 2026. The contract does not specify a set-aside status and leaves the place of performance and contact details unspecified, indicating that the inspection services may be performed at various shipping or storage locations as required. Interested parties must submit proposals through the designated DIBBS platform prior to the deadline to be considered for award, with the expectation that technical expertise in sampling standards and battery handling will be critical to successful performance.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

Sanitary Sewer Evaluation StudyThe City of Bristol Water and Sewer Department is issuing a request for qualifications to engage an engineering firm to conduct a Sanitary Sewer Evaluation Study across three specific areas of its sanitary sewer collection system. The solicitation, identified as 2P27-005, was posted on July 18, 2026, and responses are due by August 7, 2026, at 5:00 PM. The study aims to assess the condition, capacity, and performance of the sewer infrastructure in the designated zones to support future planning and maintenance efforts. Interested firms must submit their qualifications through the City’s official bid platform at BidNet Direct, as no paper submissions will be accepted. The project is administered by the Connecticut Department of Administrative Services, with Nancy Haynes serving as the primary point of contact for inquiries, reachable via email or phone. All work under this contract will be performed within the state of Connecticut, and no set-aside provisions are specified for this solicitation.

DAS Procurement

POSTED

about 14 hours ago

DEADLINE

Technical Documentation and ManualsThe contract entails the development of comprehensive technical documentation for a packaged substation system, including operation and maintenance manuals, test reports, single-line diagrams, and as-built drawings. These deliverables are essential for ensuring safe, efficient, and compliant operation of the substation infrastructure, providing detailed guidance for ongoing maintenance and system upgrades. The work must be completed to meet industry standards and align with the operational needs of the Public Utility District No. 1 of Lewis County in Washington. Bids must be submitted by August 19, 2026, at 9:00 PM EDT, under a subcontract classification with a NAICS code of 541330, which corresponds to engineering services. The solicitation was posted on July 17, 2026, and all proposals should be submitted through the designated public procurement portal. There is no set-aside designation specified, and performance is expected to support the utility district’s infrastructure in Lewis County, Washington, with no alternative location indicated.

Public Utility District No. 1 of Lewis County

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Building Commissioning and TestingThe contract outlines the commissioning and testing of HVAC systems within a building project under the City of Dallas, requiring comprehensive functional performance evaluations including airflow balancing, refrigerant charge verification, and validation of system operations against design intent. All testing must be documented to demonstrate compliance with LEED certification requirements or applicable energy efficiency standards, ensuring the building meets targeted sustainability and performance benchmarks. The work is structured as a subcontract with a NAICS code of 541330, indicating professional, scientific, and technical services related to engineering and testing. The solicitation was posted on July 17, 2026, with responses due by August 7, 2026, and no set-aside provisions are specified. While detailed agency contact information and specific performance location details are not provided, the work is expected to be performed in coordination with the City of Dallas, Texas, and all deliverables must align with the regulatory and environmental goals tied to energy compliance. The opportunity is accessible via an online portal, and potential bidders must ensure their methodologies, documentation, and testing procedures meet the rigorous standards required for certification and verification purposes.

POSTED

about 20 hours ago

DEADLINE

REQUEST FOR PROPOSALS (RFP) FOR ARCHITECTURE AND ENGINEERING SERVICES FOR TWO (2) AQUATIC CENTERSThe City of Dallas is seeking qualified architectural and engineering firms to deliver professional services for the design and development of two separate aquatic center facilities: the Singing Hills Aquatic Center and the Jaycee Zaragoza Aquatic Center. Each project will be awarded under an individual contract, ensuring distinct project management and performance requirements. Proposals must be submitted in response to two solicitation numbers, PKR-2026-00030846 and PKR-2026-00030847, with a deadline for submissions set for August 7, 2026, at 6:00 PM Central Time. All work will be performed within the state of Texas, specifically at the respective facility locations in Dallas. The solicitation was posted on July 17, 2026, and interested firms are directed to the official city procurement portal for detailed requirements and submission guidelines. Kamil Miskowiec serves as the primary point of contact for inquiries regarding the procurement process and can be reached via email.

POSTED

about 20 hours ago

DEADLINE

Specialty Inspection and Compliance VerificationA third-party inspection contract has been issued to verify the structural integrity, proper anchoring, and full compliance with Florida pool safety codes and local municipal standards for recreational water facilities. This subcontract is scoped to ensure all inspected pools and related infrastructure meet state-mandated safety requirements and are securely installed according to certified engineering practices. The inspection process will include on-site evaluations, documentation review, and formal reporting to confirm adherence to regulatory benchmarks established by Florida and applicable city authorities. The contract, titled Specialty Inspection and Compliance Verification, falls under NAICS code 541330 for architectural and engineering services and is managed by the Florida Parks and Recreation agency. It was posted on July 17, 2026, with a response deadline of August 18, 2026, allowing qualified inspectors or firms to submit proposals. The place of performance spans locations under Florida’s jurisdiction, though specific cities are not listed, and all work must be conducted in alignment with state and local safety regulations. This contract is not subject to set-aside classifications and is accessible through the procurement portal linked in the solicitation.

Parks and Recreation

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Structured Parking & Shared Parking DesignThe contract entails the design of a structured parking facility to accommodate over 265 transit users and an additional 182 spaces designated for a library and community center, with a focus on integrated shared parking strategies to optimize space utilization and operational efficiency. The scope includes conducting a comprehensive shared parking analysis to evaluate demand patterns, peak usage times, and synergies between transit ridership and community center visitors, ensuring the design supports seamless operational integration and minimizes redundant infrastructure. The project is categorized under NAICS code 541330 for architectural and engineering services and is structured as a subcontract solicitation with a response deadline of August 25, 2026. The work is associated with the Tennessee Engineering agency, and performance is expected to align with local planning and transportation goals, though specific location details are not provided. The solicitation is publicly accessible via the OpenGov procurement portal, indicating transparency and a competitive bidding process aimed at selecting qualified design professionals to deliver a functional, scalable, and user-centric parking solution.

POSTED

DEADLINE

in about 1 month

On-Site & Off-Site Roadway and Traffic EngineeringThe contract pertains to the design of access roads, dedicated turn lanes, and traffic signal modifications aimed at enhancing multimodal traffic flows at a transit center. The scope of work focuses on engineering solutions that improve connectivity and efficiency for vehicles, pedestrians, and transit users, ensuring smoother and safer movement around the facility. All design efforts are intended to support integrated transportation networks and accommodate growing demand in a multimodal environment. This is a subcontract under the NAICS code 541330 for architectural and engineering services, posted on July 17, 2026, with a response deadline of August 25, 2026. The work is associated with the Tennessee Engineering agency, though specific location details such as city or zip code are not provided. The project is managed through the Nashville procurement portal, and bidders must submit proposals by the stated deadline to be considered. While the agency organization and point of contact are unspecified, the performance location is tied to the transit center requiring these roadway and traffic enhancements.

POSTED

DEADLINE

in about 1 month

Antioch Transit Center Design RFQThe Antioch Transit Center will be constructed on the former Global Mall site at 5252 Hickory Hollow Parkway, strategically located north of Bell Road and east of I-24, to serve as a multimodal transportation hub anchored by high-frequency Bus Route 55 connecting the Hickory Hollow area to Downtown Nashville. The facility is a foundational element of the adopted Global Mall Area Master Plan, which aims to transform the underutilized retail property into a vibrant, mixed-use district featuring cultural amenities, mixed-income housing, and retail spaces. The transit center will include 11 bus bays to accommodate current and future routes including the planned Crosstown Connector and Express services, structured parking with a minimum of 265 transit spaces and 182 additional spaces for the adjacent library and community center, approximately 4,000 square feet of passenger and employee amenities, and up to 19,000 square feet of ground-floor retail shell space. The design must integrate seamlessly with the surrounding community infrastructure, which includes Nashville State Community College’s satellite campus, the Ford Ice Center, the Southeast Branch of the Nashville Public Library, and the Metro Parks Southeast Regional Community Center, whose existing parking lot currently functions as a park and ride and WeGo Link transfer point. In addition to the transit center itself, the project requires comprehensive design services for on- and off-site roadway and traffic signal improvements to support increased multimodal traffic flows. These include new onsite access roads, dedicated turn lanes, and modifications to traffic signals, as outlined in supporting operational analyses and concept diagrams. The Consultant must align all design work with the 2024 Global Mall Area Master Plan and Specific Plan zoning BL2024-448, as well as incorporate findings from prior WeGo studies related to parking, transit operations, and future residential development potential atop the structure. The project has already completed its NEPA environmental review, relieving the Consultant of further environmental documentation responsibilities. Project management will be led by WeGo with oversight from the Capital Program Management Consultant, and the final design must prioritize rider experience, safety, accessibility, operational efficiency, and long-term economic vitality while accommodating future joint development opportunities with private partners. The solicitation closes on August 25, 2026, and responses are expected from architecture, landscape architecture, and engineering firms prepared to deliver a cohesive, forward-looking transit infrastructure aligned with Nashville’s broader mobility goals.

POSTED

DEADLINE

in about 1 month

Uniform Quality Inspection and Compliance TestingThe contract titled Uniform Quality Inspection and Compliance Testing requires a third-party provider to conduct thorough inspections of uniforms to ensure material quality, stitching integrity, and full adherence to NFPA standards and procurement specifications. The inspection process will verify that all uniforms meet established safety and durability requirements critical for emergency medical personnel, with particular attention to compliance with federal and internal procurement guidelines. This subcontract is issued by the Emergency Medical Services agency in New York and is open for response until August 13, 2026, with a NAICS code of 541330 indicating it falls under the category of professional, scientific, and technical services related to testing laboratories. The inspection work will be performed regardless of specific location, as no place of performance has been designated, allowing flexibility for the contractor to conduct evaluations across supply chains or distribution centers as needed. The project is not designated for any specific set-aside and is open to eligible third-party inspection firms capable of delivering accurate, reliable, and documented compliance results. All findings must be meticulously recorded and submitted to confirm that every uniform batch meets mandatory safety and quality benchmarks prior to delivery to emergency responders. The contract is accessible through a public procurement portal, and interested parties must submit proposals by the specified deadline to be considered for award.

Emergency Medical Services

POSTED

DEADLINE

Government First Article Test (FAI) SupportThe contract supports the Government’s First Article Inspection (FAI) process for the aircraft skin, encompassing comprehensive documentation, dimensional verification, material certifications, process validation, and test reporting to ensure compliance with all technical and regulatory requirements. This work is critical to validating that production methods and materials meet the specified standards prior to full-scale manufacturing, with emphasis on accuracy, traceability, and adherence to defense quality protocols. The contract is designated as a subcontract under NAICS code 541330 and is administered by the Defense Logistics Agency within the Department of Defense. The performance location and precise point of contact are not specified, but the work is tied to the procurement referenced by contract number SPE4A726P3902. The solicitation was posted on July 17, 2026, and the nature of the engagement requires precise execution and delivery of FAI deliverables to support the government’s quality assurance framework for aerospace components.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4626 341 Cons Lgc

Same awarding agency

WOC ENTRY ACCESS SYSTEM

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

Local + Long Distance Telecommunications - Notice of Intent to Sole SourceThe U.S. Department of Defense, through the 341st Contracting Squadron at Malmstrom Air Force Base in Montana, is issuing a notice of intent to sole source a contract for local and long-distance telecommunications services. The solicitation number is A065870, with a posted date of July 15, 2026, and a response deadline of July 31, 2026. The action is categorized under NAICS code 517810, which pertains to other telecommunications services, and no set-aside provisions are being applied. Services are required exclusively at Malmstrom AFB, with a zip code of 59402, and the contract will cover essential telecommunication infrastructure to support base operations. The primary point of contact is Jean-Denis Ducimetiere, reachable at 406-731-4031 or jean-denis.ducimetiere@us.af.mil, with Jennifer Lodmell available as the secondary contact at 406-731-3567 or jennifer.lodmell.1@us.af.mil. The contract opportunity can be further reviewed through the official SAM.gov link provided.

All Other Telecommunications

POSTED

DEADLINE

ECMS Upgrade and Technical Support - Notice of Intent to Sole Source

Engineering Services

POSTED

DEADLINE

Cybersecurity and Covered Defense Information Compliance (CDI)This contract requires strict adherence to NIST SP 800-171 and DFARS 252.204-7012 to ensure the protection of Covered Defense Information within contractor systems, including the implementation of specified security controls and the timely reporting of any cyber incidents. The work is limited to small businesses under a Total Small Business Set-Aside, with the North American Industry Classification System code 541611 indicating a focus on management consulting services related to cybersecurity compliance. Performance is designated at Malmstrom AFB, Montana, and the contract must be submitted by July 20, 2026, with a posting date of July 10, 2026. The solicitation is issued under the Department of Defense and is intended for a subcontract arrangement, placing responsibility on the subcontractor to maintain compliant systems and respond to cyber events as required by federal defense standards.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Audiovisual Cabling and Conduit ManagementThe contract seeks a small business to conceal and manage audiovisual cabling including HDMI, Ethernet, and power lines within a secure military facility at Malmstrom AFB, utilizing trays, conduits, and MIL-STD-130 compliant labeling to ensure durability, security, and adherence to federal standards. All work must be performed in compliance with the rigorous environmental and operational requirements of a defense installation, with an emphasis on maintaining operational security and minimizing visibility of cabling infrastructure. The project requires precise execution to support AV systems critical to mission functions while adhering to military-grade specifications for labeling and cable management. This is a total small business set-aside under NAICS code 238220 for electrical and wiring installation, issued by the Department of Defense under the contracting office FA4626 341 Cons Lgc. The opportunity was posted on July 10, 2026, with proposals required by June 20, 2026, at 6:00 PM. Only businesses certified as small under SBA guidelines are eligible to respond. The work must be completed on-site at the specified location with no flexibility in place of performance. While no point of contact is listed, the solicitation can be accessed via the provided SAM.gov link for additional submission details and requirements.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Legacy Touch Panel Replacement and Control System UpgradeThe contract requires the replacement of existing Crestron TSW-1060 touch panels with upgraded HD TS-1080 models at Malmstrom AFB, along with complete reprogramming of the underlying control logic to ensure seamless integration with newly enhanced audiovisual systems. This work is focused on modernizing the user interface and operational functionality of the facility’s AV infrastructure, ensuring compatibility, reliability, and improved responsiveness for end users. All tasks must be executed in alignment with current technical standards and must maintain full interoperability with existing and upgraded AV components. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, with NAICS code 541330 indicating it falls under professional, scientific, and technical services, specifically in systems design and integration. The opportunity was posted on July 10, 2026, with a response deadline of July 20, 2026, and is managed by the Department of Defense under the agency designation FA4626 341 Cons Lgc. Performance is required at the specified location in Malmstrom AFB, Montana, with no additional office or contact details provided in the solicitation. The scope demands technical precision, adherence to system integration best practices, and delivery within the designated timeframe.

Engineering Services

POSTED

DEADLINE

High-Brightness 4K Large Venue Projector Supply and InstallationThe contract calls for the supply and installation of two high-lumen 4K projectors specifically for use in a military operations center located at Malmstrom Air Force Base, with a zip code of 59402. The scope includes full mounting, precise alignment, and seamless integration with existing Crestron AV control systems to ensure reliable visual display capabilities under demanding operational conditions. All work must be performed in compliance with military standards for durability, precision, and system interoperability in a secure environment. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 334310, which pertains to the manufacturing of video and audio equipment. The opportunity was posted on July 10, 2026, with proposals due by 6:00 PM on July 20, 2026. The contracting activity falls under the Department of Defense, specifically the FA4626 341 Cons Lgc organization, and performance is strictly limited to the designated site at Malmstrom AFB. Only small business concerns are eligible to respond, as mandated by the SBA set-aside provisions.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

WOC CRESTRON SYSTEM UPGRADEThe WOC Crestron System Upgrade solicitation, identified by number FA462626Q0033, is a small business set-aside contract issued by the Department of Defense through the office at Malmstrom AFB, Montana. This procurement aims to modernize the existing Crestron control system in alignment with the Statement of Objectives, with all work to be performed on-site at Malmstrom AFB. The solicitation was posted on July 10, 2026, and responses must be submitted by July 20, 2026, by 6:00 PM Eastern Time. Questions regarding the solicitation must be submitted no later than July 15, 2026. The contract falls under NAICS code 334419, which covers other electronic component manufacturing, and is fully reserved for small businesses as defined by the SBA. Primary point of contact is Jean-Denis Ducimetiere, reachable at 406-731-4031 or jean-denis.ducimetiere@us.af.mil, with Rhiannon DeForest as secondary contact. Further details and the official solicitation are accessible via the SAM.gov portal.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Horizontal Construction Multiple Award Contract (MAC)The Horizontal Construction Multiple Award Contract (MAC) at Malmstrom Air Force Base, Montana, is a total small business set-aside solicitation under NAICS code 237990 with a size standard of $45 million, designed to support a wide range of horizontal construction projects across the installation and its missile alert and launch facilities. The contract will have an initial five-year ordering period with an optional two-year extension, for a maximum lifecycle of seven years, and a total aggregate funding cap of $25 million, with a guaranteed minimum obligation of $500 fulfilled through attendance at the post-award conference. The initial project under this MAC is the “Repair North/South Base Water System, Phase 2,” which involves replacing water mains, installing valves, fire hydrants, meters, and appurtenances, along with the removal and restoration of concrete driveways, sod, and curbs. Work must be performed at a minimum depth of 6.5 feet below finished grade, with backfill compacted to 95% max dry density using 8-inch lifts, and flowable fill installed per specification. All construction must comply with federal, state, and Air Force environmental, safety, and operational standards, including OSHA, 40 CFR, 49 CFR, MDEQ, AFMAN 32-7002, and EM 385-1-1, with particulate emissions limited to 20% opacity and ENERGY STAR compliance required for all energy-using equipment. All contractor personnel must obtain proper base access credentials via AF Form 355 or AF Form 1172, submit an Entry Authority List to the contracting office, and secure vehicle stickers (AF Form 75) for private vehicle access; failure to comply may result in denied entry. Personnel must complete Level I Anti-Terrorism Awareness Training within 30 days of access authorization and annually thereafter, and adhere to all Force Protection Conditions, random anti-terrorism measures, and base security protocols. The project requires a detailed Quality Control Plan approved by the Contracting Officer, with as-built drawings and equipment data submitted ten days prior to final acceptance. Materials must be accompanied by certificates of compliance containing project number, date of shipment, source, carrier information, destination, and net quantity, and all pipe must be clearly and permanently marked. Work is limited to standard hours of 7:45 a.m. to 4:15 p.m., Monday through Friday, but

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Repair Launch Facility ConcreteThis contract is a five-year requirements-type agreement for concrete repair services at Malmstrom Air Force Base in Montana, specifically targeting joint, crack, and delaminated or damaged concrete repairs at one or more Launch Facilities. The work will be performed under NAICS code 238110, with a small business size standard of $19 million, and is structured as a 100% Small Business Set-Aside, limiting eligibility to qualified small businesses registered in the System for Award Management. The total aggregate value of all task orders issued under this contract will not exceed $4.25 million, with no funds currently available and no obligation on the part of the government to reimburse offerors if the solicitation is canceled before or after the proposal deadline. Performance is expected to occur at the designated location with potential for minimal access to restricted areas, and each task order will have its own Notice to Proceed and period of performance determined at issuance. The contracting office is the 341st Contracting Squadron at Malmstrom AFB, with primary and alternate points of contact provided for inquiries. Proposals must be submitted electronically through SAM.gov by the deadline of July 14, 2026, and all offerors must maintain active SAM registration. The solicitation does not include detailed evaluation factors, inspection criteria, packaging specifications, or payment and invoicing instructions, as these will be outlined in the forthcoming Request for Proposal.

Poured Concrete Foundation and Structure Contractors

POSTED

about 1 month ago

DEADLINE

Epoxy and Polymer-Based Concrete Repair Material SupplyThis contract involves the supply of specialized materials including high-performance epoxy resins, polymer-modified mortars, and corrosion-inhibiting coatings intended for concrete restoration projects. The focus is on providing advanced repair materials designed to enhance the durability and longevity of concrete structures. The procurement is structured as a subcontract and is designated as a Total Small Business Set-Aside under FAR 19.5, indicating that only small businesses are eligible to compete for this opportunity. The solicitation is associated with the Department of Defense, specifically under the agency code FA4626 341 Cons Lgc, with the place of performance at Malmstrom Air Force Base, zip code 59402. The contract falls under NAICS code 325510, which covers the manufacturing of paints, coatings, and adhesives. This supply opportunity presents a significant role in supporting maintenance and restoration efforts within military infrastructure by providing innovative polymer-based repair materials that meet stringent performance criteria.

Paint and Coating Manufacturing

POSTED

DEADLINE

Concrete Sawing, Drilling, and Coring ServicesThe contract involves providing precision concrete sawing, drilling, and coring services specifically for repair preparation, utility access, and structural modifications at launch facilities. It is designated as a total small business set-aside under the Small Business Administration (SBA) guidelines, ensuring the contract opportunity is reserved exclusively for small businesses. The work will be performed at Malmstrom Air Force Base, indicated by the NAICS code 238990, which corresponds to specialty trade contractors. Issued by the Department of Defense through the FA4626 341 Cons Lgc office, this subcontract requires skilled concrete cutting techniques to support facility maintenance and modifications vital to operational readiness. The contract posting date was May 19, 2026, signaling a current opportunity for eligible small businesses to participate in government contracting within the construction specialty trades sector.

All Other Specialty Trade Contractors

POSTED

DEADLINE