Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Critical Application Testing and Inspection Services

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Critical Application Testing and Inspection Services subcontract involves performing mandatory testing and sampling inspections for prime contractors supporting DLA Weapons Support ASC projects. The primary objective is to certify panels for critical application use by executing detailed sampling plans and destination-style inspections. These evaluations utilize specialized testing rigs to verify structural integrity, luminosity, and electrical output, ensuring all deliverables meet strict quality standards. All work must be performed in compliance with MIL-STD-1916 or ASQ H1331, with the final deliverables consisting of certified inspection certificates and test reports. The performance of this contract is located in San Diego, California, under NAICS code 541380. This effort is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

General Info

Subcontract for critical application testing and inspection services for DLA Weapons Support ASC.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-019Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL, LIGHT INDICAT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs mandatory testing and sampling inspections for prime contractors on DLA Weapons Support ASC projects to certify panels for critical application use. Executes sampling plans and destination-style inspections using testing rigs for electrical output, luminosity, and structural integrity. Requires compliance with MIL-STD-1916 or ASQ H1331. Delivers certified test reports and inspection certificates.

Similar Contracts

Same NAICS industry code

First Article Testing and ValidationThis subcontract for First Article Testing and Validation supports prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will perform validation testing on five initial units to ensure the manufacturing process aligns with the Technical Data Package and established quality standards. Work involves using precision testing equipment and metrology to verify material properties and dimensions, and must be conducted within a certified testing facility located in New Cumberland. The primary deliverables for this engagement are five validated units and a formal First Article Test Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing (PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on providing critical quality assurance testing for prime contractors fulfilling DLA supply contracts. The scope of work involves executing First Article Testing to validate initial production runs and Production Lot Testing to maintain batch consistency. All activities must align with the Technical Requirements Package and the DLA Master List of Technical and Quality Requirements, utilizing specialized facilities to verify material and structural integrity. The contractor is responsible for delivering formal test reports and CDRL Form DD 1423 to document compliance. This opportunity is categorized under NAICS code 541380, with the place of performance located in Phoenix, Arizona. Interested parties must adhere to the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThis subcontract for Quality Assurance and Inspection Services involves the independent verification and sampling of manufactured levers for prime contractors fulfilling DLA supply contracts. The scope of work requires the inspection of critical, major, and minor attributes utilizing coordinate measuring machines, calipers, and precision gauging. All activities must be performed in accordance with DLA Master List requirements and standards MIL-STD-1916 or ASQ H1331, culminating in the delivery of certification of conformance and detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB. Classified under NAICS code 541380, the solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing technical testing services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on conducting First Article Testing on two units followed by Production Lot Testing to ensure quality conformance with the Technical Data Package. The successful contractor is responsible for delivering a First Article Test Report and validated results from the production lot testing. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance, as well as JCP certification for necessary data access. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) ExecutionThis subcontract involves the execution of First Article Testing for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The primary objective is to validate the design and manufacturing processes for 1.5 inch stainless steel valves in accordance with FAR 52.209-3 or 52.209-4. The successful contractor will be responsible for delivering a validated test unit and a formal FAT report to the Department of Defense at the New Cumberland facility. To be eligible for this engagement, providers must hold JCP certification to access export-controlled technical data and maintain CMMC Level 2 compliance. The opportunity was posted on November 8, 2026, with a response deadline of November 19, 2026. The work falls under NAICS code 541380 and is managed through the DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Evaluation and CertificationThis subcontract, titled First Article Test (FAT) Evaluation and Certification, involves performing critical testing for prime contractors on Defense Logistics Agency projects. The primary objective is to validate the design and manufacturing processes of frequency converters using specialized electronic testing and measurement equipment to ensure conversion accuracy. The selected provider will coordinate directly with the Engineering Support Activity for acceptability evaluations and is required to deliver a comprehensive FAT Report along with a certified first article sample. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the work is designated under NAICS code 541380. Performance of the contract will take place at Robins Air Force Base. Interested parties should note the response deadline of November 16, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) and Validation ServicesThis subcontract for First Article Test (FAT) and Validation Services supports the DLA Weapons Support Fluid Handling Division at Tinker AFB. The selected provider will perform critical testing for prime contractors to validate manufacturing processes, specifically executing protocols for dimensional inspection, material verification, and Class 3 thread compliance. These tasks must be completed using high-precision gauging or CMM equipment within a facility that maintains ISO 9001 or SAE AS9003 compliance. The primary deliverables for this engagement include a comprehensive FAT Certification report and one validated first-article unit. This opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

Third-Party Quality Inspection and CertificationThis subcontract for Third-Party Quality Inspection and Certification supports the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent inspection and point-of-origin sampling for prime contractors to verify that dimensions and materials comply with NAS1149 Revision 8. All work must be conducted using calibrated precision measurement tools and follow MIL-STD-1916 or ASQ H1331 sampling plans, with final deliverables consisting of detailed inspection reports and Certificates of Conformance. To be eligible, the contractor must hold ISO 9001 or AS9100 accreditation. The performance of these services is located in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Quality Assurance and Technical Certification for Safety ValvesThis subcontract, issued by the Department of Defense through DLA DIST SAN JOAQUIN, focuses on providing quality assurance and technical certification for safety valves. The selected contractor will perform technical inspections and quality certifications for prime contractors to ensure that valve specifications align with NSN 4820-01-673-7805. Key responsibilities include conducting pressure testing using calibrated rigs in accordance with the DLA Master List of Technical and Quality Requirements and delivering final quality inspection reports and Certificates of Conformance. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties should note the posting date of November 8, 2026, with a response deadline set for November 19, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform destructive and non-destructive testing on three sample washers to ensure dimensions and material properties align with DLA Master List requirements. All work must be conducted using laboratory-grade measurement and test equipment in New Cumberland. To qualify, the provider must maintain ISO/IEC 17025 accreditation or demonstrate compliance with ISO 9001/AS9003 standards. The primary deliverables for this engagement include a comprehensive FAT Test Report and a formal certification of compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Production Lot Testing (PLT) SupportThis subcontract opportunity is for Production Lot Testing support benefiting the Department of Defense under the DLA Weapons Support Electrical Devices Division. The selected contractor will be responsible for coordinating production lot testing for prime contractors, which includes selecting random samples for Government Quality Assurance Representative review, preparing comprehensive test data packages with material certifications and inspection sheets, and managing traceable shipping to the Redstone Technical Test Center. The final deliverable consists of five validated test samples along with all necessary supporting documentation. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to be considered for this specialized quality assurance and logistics coordination role.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on aerospace projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized military-grade packaging, marking, and preservation for high-precision bearings to ensure they are ready for FOB Origin shipment. All activities must be performed at Tinker AFB and strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-197M for preservation. Qualified providers must possess certification in DLA/DoD packaging standards and have access to industrial marking equipment and appropriate preservation materials. The opportunity falls under NAICS code 561910, with a response deadline set for November 16, 2026.

Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

Precision Annular Ball Bearing ManufacturerThis subcontract involves the manufacture and supply of ten precision annular ball bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work includes the precision machining and assembly of components under NSN 3110-00-858-2670, with a specific requirement to perform First Article Testing on three units for delivery to Tinker AFB. To ensure compliance and quality, the provider must maintain SAE AS9100 certification and possess the capability to produce Critical Safety Items. All production must adhere to the DLA Master List RA001 and comply with the Berry Amendment and Buy American Act regulations.

Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

Plain Hexagon Nut ManufacturerThis subcontract requires the manufacture and delivery of 465 plain hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All units must be produced according to NSN 5310-01-593-9654 specifications and the DLA Master List of Technical and Quality Requirements. The contract strictly prohibits the use of additive manufacturing and mandates that materials be free of hexavalent chromium. To ensure quality control, the manufacturer must utilize inspection systems certified under ISO 9001 or SAE AS9003. The completed order of 465 nuts is to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Panel Proc Control (NSN 1680-01-6501890)This subcontract involves the supply of one Panel Proc Control unit, part number 123AV93340-5, for prime contractors supporting Defense Logistics Agency Foreign Military Sales projects. The work is managed under the DLA Weapons Support ASC Commodities Division of the Department of Defense and falls under NAICS code 334413. The contractor is responsible for manufacturing or sourcing the component in strict accordance with the DLA Master List requirements. Quality assurance is a critical component of the agreement, requiring the use of inspection systems that comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, while packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. The final inspected and marked component is to be delivered FOB Origin.

Semiconductor and Related Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Machine Bolts (NSN 5306015564899)This subcontract involves the procurement of 239 machine bolts for prime contractors supporting DLA Weapons Support ASC projects. The supplied hardware must strictly adhere to NSN 5306015564899 and Fastenal P/N 0161880 specifications. All items are to be delivered FOB Origin to DLA Distribution in New Cumberland, Pennsylvania. The contractor is required to follow specific packaging and marking standards, including ASTM D3951, RP001, and MIL-STD-129. Additionally, the provider must maintain compliance with NIST SP 800-171 and adhere to the Buy American Act. The opportunity is categorized under NAICS code 423830 and is managed by the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

Self-Locking Plate Nut SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 267 self-locking plate nuts identified by NSN 5310004550395. The contractor is responsible for manufacturing or sourcing these components while adhering to strict quality control sampling standards per MIL-STD-1916 or ASQ H1331. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The agreement mandates full compliance with MIL-STD-2073-1E, RP001, and MIL-STD-129 for all packaging and marking requirements. Additionally, the provider must ensure that all hazard warning labels meet 29 CFR 1910.1200 standards and provide Material Safety Data Sheets where applicable. This opportunity is designated as a Total Small Business Set-Aside.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Night Vision Utility Lights (NSN 6220-01-491-1898)This subcontract, set aside for Women-Owned Small Businesses, involves the manufacture and supply of 45 Night Vision Utility Lights (NSN 6220-01-491-1898) for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict Department of Defense specifications for night vision compatibility and must adhere to the Buy American Act and Berry Amendment. Deliveries are designated for DLA Warner Robins and DLA Depot Oklahoma. Operational requirements include rigorous quality assurance performed according to MIL-STD-1916 or ASQ H1331, with packaging following MIL-STD-129 and MIL-STD-2073-1E standards. Additionally, the contractor must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. The project falls under NAICS code 339113 and is managed through the Department of Defense.

Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

Shear Bolt SupplyThis subcontract involves the supply of 17 specialized shear bolts for prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. The provider is responsible for manufacturing or sourcing these components in strict accordance with DLA technical data and the Master List of Technical and Quality Requirements, with a specific prohibition against unauthorized additive manufacturing. The contract mandates full compliance with the Buy American Act and NIST SP 800-171 security standards. Additionally, the provider must ensure supply chain traceability per DLAD #C03 and adhere to MIL-STD-129 and MIL-STD-2073-1E packaging specifications. Performance for this requirement is centered in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supplier of Rigid Metal Conduit (NSN 5975-01-349-1798)This subcontract involves the manufacture or sourcing of four units of rigid metal conduit, specifically NSN 5975-01-349-1798, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier must ensure all materials meet the DLA Master List of Technical and Quality Requirements and adhere to strict quality control standards, including zero-based sampling per MIL-STD-1916 or ASQ H1331. Packaging must be completed in accordance with MIL-STD-129 and RP001, with final delivery designated for DLA Distribution Warner Robins. Beyond technical specifications, the contractor is required to maintain cybersecurity compliance as outlined in NIST SP 800-171. The project falls under NAICS code 332312 and is managed by the Department of Defense. Interested parties must have submitted responses by the November 16, 2026, deadline.

Fabricated Structural Metal Manufacturing

POSTED

about 2 hours ago

DEADLINE

Hexagon Nut Supply

Fastener, Button, Needle, and Pin Manufacturing

POSTED

about 2 hours ago

DEADLINE

Zinc Coating and Finishing for Critical FastenersThis subcontract involves providing specialized zinc coating and finishing services for critical steel hexagon nuts supporting DLA Weapons Support ASC projects. The contractor is responsible for utilizing industrial plating baths to apply the coating, ensuring that the entire process is strictly free of mercury, mercury compounds, and hexavalent chromium. All work must be performed in accordance with environmental regulations and the specific technical requirements outlined in the prime contract. The project is managed under the Department of Defense and requires the delivery of finished fasteners ready for final inspection. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this effort categorized under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 2 hours ago

DEADLINE

Manufacturing of Self-Locking Hexagon NutsThis subcontract involves the manufacture of 921 zinc-coated steel self-locking hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to Basic Drawing NR 10001 2533408 Revision B and TDP Rev A Gen 1, utilizing precision machining equipment and maintaining compliance with QAP 13873. Quality assurance is a critical component of the agreement, requiring sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331. All delivered units of NSN 5310-00-020-0359 must be accompanied by a Certificate of Quality Compliance. The work is to be performed in New Cumberland, Pennsylvania.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing (FAT) and Quality Validation Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Specialized Testing and Certification for Airframe Pan Assembly

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

Product Verification Testing (PVT) Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Quality Inspection and Sampling Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Ballistic Quality Assurance and Production Lot Testing (PLT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Specialized Electrical Testing Laboratory (FAT)

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

Production Lot Testing (PLT)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

CSI Quality Assurance and Metrology Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing and Quality Validation

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS