Crouse Hinds Rack Mount ALCMS Computers and Software

411th CSB Kunsan Airbase, Unit 2112, APO AP 96264 FSC: 6110 Electrical Control Equipment NAICS Code: 334511 Search Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing Solicitation Number: W90VN7-17-T-0004 Closing Response Date: 5 May 2017 @ 1300 (1pm) Korea Standard Time Points of Contact: SSG William Yongue contact@example.gov Telephonic Requests will not be honored I. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. The procedures of FAR 13, 14, and 15 may be used in this particular acquisition. This announcement constitutes the only solicitation; quotes are requested and a written solicitation will not be issued. II. The solicitation number is W90VN7-17-T-0004 and is issued as a Request for Quotation. III. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95 dated January 13, 2017. IV. Potential offerors are to quote on the following line items: This is a Brand Name Only Requirement open to authorized distributors of the items listed below. The Government intends to award a Firm Fixed Price contract for the following Contract Line item Description Quantity and Unit of Issue: CLIN 0001 - Crouse Hinds Certified Rack Mount ALCMS Computers and Software-1 LOT. CLIN 0002 Load/Install Software 1 JOB CLIN 0003 - Installation and Commisioning, Installation and commisioning at Kunsan AB, South Korea -- 1 JOB. CLIN 0004 - Commercial Shipping (if applicable), Door to Door, FOB destination to Kunsan AB, South Korea. (See Delivery Instructions). The vendor shall price this CLIN as the price using commercial air shipping (Estimation). Proof of actual shipping cost (Receipt of shipping charges) will be required for any shipping charges over $100.00 as per Federal Regulatory Guidance. -- 1 LOT (EST). SEE ATTACHED Statement of Work for complete requirement details. CLIN 0001 Crouse Hinds Certified Rack Mount ALCMS Computers and Software-1 LOT. 4.1.1. ALCMS computer hardware: Four (4) rack mount computers with MICROSOFT WINDOWS 7 Operating System and internal Echelon Card, loaded and tested at the Factory of CROUSE-HINDS, certified by FAA Advisory Circular 150/5345-56 (current edition), and compatible with Crouse Hinds DIU T5000-10-01-00 DIGITRAC Unit 3U Assembly. The hardware to be parts of the computers shall be brand name or equal to those listed in section 4.1.1 of the Statement of Work CLIN 0002 Load/Install Software 4.2 Contractor shall install new Window7-compatible Distributed Computer Control and Monitoring System (DCCMS) software, including the software and features as list below, onto four (4) new ALCMS computer systems. DCCMS shall be compatible with the ALCMS of CROUSE-HINDS and be certified by FAA Advisory Circular 150-5345-56 (current edition). CLIN 0003 - Installation and User Training Installation and inspection processes shall be performed by or under supervision of the certified field engineer, including but not limited to followings. The processes shall be in accordance with the manufacturer's official installation guidance and the inspection guidance in order to confirm that new computer systems conform to the existing ALCMS hardware and devices CLIN 0004 Commercial Shipping (if applicable) Door to Door, FOB destination to Kunsan AB, South Korea. (See Delivery Instructions). The vendor shall price this CLIN as the price using commercial air shipping (Estimation). Proof of actual shipping cost (Receipt of shipping charges) will be required for any shipping charges over $100.00 as per Federal Regulatory Guidance INSTRUCTIONS TO OFFERORS 1. The items shall be new construction of a standard commercial product offered for sale and shall meet or exceed the specifications set forth in the solicitation and attached Scope of Work. 2. Quote must adhere to the following instructions: (a) Vendor, at the discretion of the Government, may be asked to provide more information and clarification regarding their quote. The Government may make a final determination as to whether an offer is acceptable or unacceptable solely on the basis of the quote as submitted, without requesting any further information. The quotes are intended to be evaluated, and award made, without discussions with the offerors. 3. All quotes shall be submitted via FBO.gov during the time period. 4. Vendor shall provide a quote for all commercial items listed, to include shipping as a single lot if applicable and installation. Quotes that do not include all items will be not evaluated. The quote shall be on an all or none basis; no partial quotes and/or deliveries are allowed. 5. Place of Contract Performance: Kunsan AB, South Korea DETAILED QUOTE INSTRUCTIONS. Vendor shall have an active registration in the System for Award Management (SAM's) www.sam.gov. And shall maintained an active Wide Area Workflow (WAWF) account to receive electronic payments through WAWF at https://wawf.eb.mil. All quotes, questions, and correspondence, SHALL BE submitted in the ENGLISH language. QUOTE FORMAT AND CONTENT. The quote shall contain, as a minimum, the following: a. Quote must include technical specifications, characteristics, capabilities, brand, and picture of each item in a single document. b. The Government will evaluate the quote using only the information provided with the quote. Failure of an offeror to submit detailed information sufficient to evaluate the offer, as stipulated herein, may result in a rating of technically unacceptable for the technical factor. If attachments are provided they shall be uploaded to FBO.gov and shall be submitted in Microsoft Word, Excel format, Adobe Acrobat (.pdf) format, or as indicated elsewhere. WINZIP (.zip) files cannot be accepted as they are routinely blocked by the domain firewall. FAR 52.212-1, Instructions to Offerors -- Commercial Items (APR 2014), applies to this acquisition. Addendum: 52.212-1 Instruction to Offerors - Commercial Items (Apr 2014) Period for Acceptance of Quotes/Offers. a. Vendor agree to hold the prices in its quote firm for 120 calendar days from the date specified for receipt of quote. FAR 52.212-2, Evaluation--Commercial Items (Oct 2014), applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: (1) technical capability of the item(s) offered to meet the Government requirement; technical capability includes the offeror's delivery capability to meet the schedule as set forth in the RFQ; (2) Past Performance and (3) price. The Government intends to award to one vendor on an all or none basis. A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. - Award will be made based on the lowest overall price offered that meets the technical requirement of the scope of work, delivery schedule, installation requirement, and a demonstrated record of successful past performance. - Offerors are encouraged to submit records of past performance for the past three years that demonstrate successful completion of similar requirements. The Contracting officer may consider past performance data from a wide variety of sources both inside and outside the Federal Government in accordance with agency procedures. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL ITEMS (DEVIATION 2013-O0019) (MAR 2016) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509). (ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17. (iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (v) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (vi) 52.222-35, Equal Opportunity for Veterans (Jul 2014) (38 U.S.C. 4212). (vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (viii) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212). (ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67). (xi) X (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627). (xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.) (xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67) (xiv) 52.222-54, Employment Eligibility Verification (Aug 2013). (xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658). (xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) FAR 52.209-6, Protecting the Governments' Interest When Subcontracting with Contractors FAR 52.222-3, Convict Labor; (June 2003) FAR 52.222-19, Child Labor - Cooperation with Authorities and Remedies; (FEB 2016) FAR 52.222-21, Prohibition of Segregated Facilities; (Apr 2015) FAR 52.222-26, Equal Opportunity; (Apr 2015) FAR 52.222-50, Combating Trafficking in Persons (Mar 2015)- FAR 52.223-18, Encouraging Contractor Policies to Ban Test Messaging while Driving; (Aug 2011) FAR 52.225-13, Restrictions on Certain Foreign Purchases; (Jun 2008) FAR 52.232-33, Payment by Electronic Funds Transfer; (Jul 2013) FAR 52.233-1, Disputes (May 2014) FAR 52.233-3, Protest After Award (Aug 1996) FAR 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) FAR 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels; (Feb 2006) The following provisions and clauses also apply to this acquisition: 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://farsite.hill.af.mil (End of clause) DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016) (a) Definitions. As used in this clause' Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. Concatenated unique item identifier means-- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency. Government's unit acquisition cost means-- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459. Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier. Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items: ------------------------------------------------------------------------ Contract line, subline, or exhibit line item No. Item description ------------------------------------------------------------------------ ................................... ------------------------------------------------------------------------ (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: ------------------------------------------------------------------------ Contract line, subline, or exhibit line item No. Item description ------------------------------------------------------------------------ ................................... ------------------------------------------------------------------------ (If items are identified in the Schedule, insert ``See Schedule'' in this table.) (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----. (v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification. (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-- (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media. (5) Unique item identifier. (i) The Contractor shall-- (A) Determine whether to-- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL- STD-130, latest version. (ii) The issuing agency code-- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. ** Once per item. (e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods-- (i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or (iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g) Subcontracts. If the Contractor acquires by contract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause) DFARS 252.225-7041 CORRESPONDENCE IN ENGLISH (JUNE 1997) DFARS 252.232-7003, Electronic Submission of Payments Requests and Receiving Reports; (June 2012) DFARS 252.232-7006, Wide Area WorkFlow Payment Instructions; (Jun 2012) DFARS 252.232-7010, Levies on Contract Payments; (Dec 2006) DFARS 252.244-7000, Subcontracts for Commercial Items; (Jun 2013) DFARS 252.247-7023, Transportation of Supplies by Sea; (Apr 2014) Clauses provided in Full Text. 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (APR 2016) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision. (a) Definitions. As used in this provision -- "Economically disadvantaged women-owned small business (EDWOSB) Concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. Inverted domestic corporation means a foreign incorporated entity that meets ...