Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

CSO: Pallet Rack and Secure Storage Design-Build for Existing Delaware Army National Guard Facility

Active
W912L5-26-S-C002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Commercial Solutions Opening solicitation W912L5-26-S-C002 seeks an innovative design-build solution from a small business to furnish and install industrial-grade organizational storage systems in a newly constructed, unoccupied facility at 1401 Newport Gap Pike, Wilmington, DE 19804. The scope includes the supply and installation of fixed selective pallet racks, secure wire mesh partition cages, and heavy-duty static boltless steel shelving, with a requirement that 65 percent of the solution meet specific technical specifications to ensure durability, functionality, and compliance with military storage standards. This solicitation is a Small Business Set Aside under NAICS code 337215, directed by the Department of Defense through the Office of the Delaware Army National Guard. Responses are due by August 26, 2026, at 3:00 PM ET, with the opportunity to submit proposals through SAM.gov and access supporting documentation via the posted link. A non-mandatory site visit is scheduled for August 18, 2026, at 2:00 PM ET, during which participants can review the physical location and obtain hard copy as-built drawings of the facility; advance registration with names and company affiliations must be submitted to Joseph Scarpa by 2:00 PM ET on August 17. For digital access to the drawing set, interested parties must submit company identifying information through the attachments section of the SAM.gov posting, after which the government will vet the request and provide the PDF within approximately 24 hours. Primary point of contact is Joseph Scarpa at Joseph.Scarpa6.CIV@army.mil or 302-326-7365, with Amy Kline as secondary contact. All proposals must align with the specified technical requirements and demonstrate a commercially available, ready-to-deploy solution tailored to the unique conditions of the Delaware Army National Guard’s storage facility.

General Info

Small business contract to install military-grade storage systems in Delaware facility by August 26, 2026.

Agency

Department Of Defense → W7M0 Uspfo Activity De ArngView Agency

NAICS

337215 - Showcase, Partition, Shelving, and Locker ManufacturingView NAICS

Place of Performance

Wilmington, DE, 19804, USA

Set-Aside

SBA

Documents

(2)

CSO+Announcement_DE+ARNG+Pallet+Rack+Secure+Storage_W912L526SC002_2026-07-31.docx

DOCX

CSO+W912L526SC002+Pallet+Rack+and+Secure+Storage_65-Percent+Design_2026-07-31.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W7M0 Uspfo Activity De Arng
Contacts2 people available
OfficeNEW CASTLE, DE, 19720-1615, USA
Organization / Agency
Department Of Defense → W7M0 Uspfo Activity De Arng
View Agency Profile
Office AddressNEW CASTLE, DE, 19720-1615, USA

Full Description

Show more

See attached 3-page Commercial Solutions Opening (CSO) with its accompanying 65-percent specification seeking an innovative commercial design‑build solution to furnish and install industrial‑grade organizational storage-—including fixed selective pallet racks, secure wire mesh partition cages, and heavy‑duty static boltless steel shelving—-in a newly constructed unoccupied storage building located at 1401 Newport Gap Pike, Wilmington, DE 19804 for Delaware Army National Guard (DE ARNG). 


Site Visit: Non-mandatory site visit 2:00 PM ET Tuesday 18 Aug 2026 at the facility. Provide name and company affiliation of visitors to Joseph.Scarpa6.CIV@army.mil no later than 2:00 PM ET Monday 17 Aug.


Hard copy as-built drawing set of 1401 Newport Gap Pike building available for viewing during site visit. For PDF file of drawing set, submit sufficient company identifying information via request in the attachments section of this SAM.gov web site. Government will vet your information and respond to your request typically within 24 hours.

Similar Contracts

Same NAICS industry code

NAICS: 337215
New
Federal
71 SFS Armory Weapons Racks, Vance AFB
Solicitation # 213328-VAFB
ASRC Federal Gulf State Constructors, LLC is soliciting quotes on behalf of the U.S. Government for the purchase and installation of specific weapons storage racks and a mobile storage bench at the Security Forces Armory, Building 527, Vance Air Force Base in Enid, Oklahoma. The required items include seven UWR4 M4 rifle and M18 pistol storage racks, two UWR1 rifle components, one UWR2 night vision storage unit, one UWR3 ammunition storage unit, one UWR5 magazine ammunition storage unit, two UWR6 NVG and individual equipment storage units, and one mobile storage bench with cabinet. All items must be supplied exactly as listed or as equal alternatives aligned with the Statement of Work. The contractor is responsible for providing all labor, materials, and equipment, including mounting, testing, and inspecting the installed components to ensure proper securement and locking function. The work must be completed Monday through Friday between 0800 and 1700, with a lead time of 18 to 20 weeks after order receipt, and the contractor must clean the work area and remove all debris. Submittals are required prior to ordering, and the contractor assumes full liability for any damage incurred during installation. Hazardous materials used require MSDS documentation. Award will be made to the lowest priced technically acceptable offeror, with technical acceptability dependent on full compliance with the Statement of Work, proven ability to deliver and install all listed components, and adherence to the specified delivery schedule. Previous experience with similar installations is preferred but not mandatory. All offerors must be actively registered in the System for Award Management at the time of submission, and quotes must be emailed to Betty Kliewer no later than August 21, 2026, at 11:00 AM CST; no late submissions will be accepted. Questions must be submitted via the provided Q&A form by close of business on August 10, 2026. The solicitation is open to all qualified vendors with no set-aside provisions, and the North American Industry Classification System code is 337215. The government retains the right to cancel the solicitation at any time without obligation to reimburse offerors for incurred costs. Attachments include the Statement of Work, General Terms and Conditions, Annual Representations and Certifications, Wage Determination, and the Q&A Form.
FA3029 71 Ftw Cvc

POSTED

about 20 hours ago

DEADLINE

in 20 days
View Details
NAICS: 337215
DIBBS
RACK, STORAGE, SMALL ARM
Solicitation # SPE7LX-26-U-9008
The contract seeks the procurement of 15 estimated units of a small arms storage rack under solicitation SPE7LX-26-U-9008, with delivery required 107 days after order placement and FOB origin terms applied. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be marked, labeled, and palletized per MIL-STD-129 and RP001 requirements to ensure uniformity and traceability. The contract includes specific reference to multiple technical drawings and part numbers associated with the storage rack, all of which must be manufactured and delivered per the latest revisions effective as of the solicitation or award date. Items are classified as Category I munitions under DoDM 4160.28-Vol. 3, necessitating demilitarization procedures upon return or disposal, and require removal of government identification from non-accepted supplies. Hazardous material labeling must adhere to 29 CFR 1910.1200, with pre-award submission of hazard labels and MSDS required, and any radioactive materials must be reported in advance. Electronic submission through DIBBS is mandatory, with offers due by August 7, 2026, and payment processing must occur via Wide Area WorkFlow using electronic invoices and receiving reports. The contract is structured as an indefinite delivery contract with a maximum value of $350,000 and no guaranteed minimum quantity, making procurement contingent on future order issuance. Compliance with stringent cybersecurity and data safeguarding requirements is mandated through clauses such as NIST SP 800-171 and DFARS 252.204-7012, while restrictions on sourcing from Communist Chinese military companies and the use of hexavalent chromium further limit material and supply chain options. Offerors must affirm their small business status in SAM and comply with employment eligibility verification, prohibitions on trafficking in persons, and equitable opportunity provisions. Contract administration is handled by the Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and acceptance occurs at the destination after government inspection. All clauses, including those related to subcontracting, payment acceleration for small businesses, and whistleblower protections, are incorporated as written or with applicable deviations issued in February 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

9 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → W7M0 Uspfo Activity De Arng

Same awarding agency

NAICS: 332312
New
Federal
CSO: LUH-72A Aircraft Maintenance Platform for Delaware National Guard Army Aviation Support Facility
Solicitation # W912L5-26-S-C030
The contract seeks a mobile, modular, multi-person, height-adjustable maintenance platform designed specifically for daily maintenance operations on the LUH-72A Lakota rotorcraft within the Army Aviation Support Facility operated by the Delaware Army National Guard. The platform must support safe and efficient access to all critical areas of the aircraft during routine servicing and inspection, ensuring optimal operational readiness while meeting stringent military standards for utility, durability, and safety. It must be fully compatible with the physical layout and operational protocols of the AASF hangar in New Castle, Delaware, and accommodate multiple technicians working simultaneously at varying heights. This solicitation, numbered W912L5-26-S-C030, is a Small Business Set Aside under NAICS code 332312, reserved exclusively for small businesses to compete. Responses are due by August 25, 2026, and the opportunity was posted on July 31, 2026. The Department of Defense, through the U.S. Army Program Executive Office for Aviation, is the contracting authority, with Joseph Scarpa as the primary point of contact and Amy Kline as secondary. All work must be performed at the Delaware location, and proposals must demonstrate technical feasibility, compliance with military specifications, and the capability to deliver and install the platform without disruption to daily hangar operations.
Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 24 days
View Details