CUP, TAPERED ROLLER BEARING

This contract specifies the procurement of a cup tapered roller bearing identified by NSN 3110-00-100-0367 and part numbers 3320 from Timken Corporation and NTN Bearing Corporation of America, with a required quantity of 126 units. The bearing is classified as a commercial item and a critical application item, with no shelf life requirement. Delivery is due within 520 days FOB origin, and inspection and acceptance occur at the origin. The contractor must comply with stringent packaging and preservation standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific requirements for preservation methods, packaging materials, and marking. The item must be manufactured in the United States, its outlying areas, or Canada, and the cost of components made in these regions must exceed 50% of the total bearing component cost. A contractor declaration regarding the domestic or foreign origin of materials is mandatory and must be submitted upon request; failure to provide this will disqualify the quote. No unit identification is required per customer request, and the contract prohibits the use of foreign-sourced bearings unless a waiver is granted. The solicitation may be canceled or suspended if no compliant offers are received. All technical and quality requirements are governed by the DLA Master List, and measuring equipment, inspection procedures, and quality assurance verification must meet defined specifications.