This Government Contract opportunity from Department Of Defense was posted on July 28, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Customized ATV & Trailer

Awarded

FA7037-10-R-8006Federal

Submission Closed07/28/2010, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336212

New

SLED

EZ LOADER ALUMINUM TRAILER

Solicitation # R2701478

The County of Hawai'i, through the Hawaii Fire Department, is soliciting quotations for the procurement of two EZ Loader Aluminum Trailers, specifically Model A102WVS 2325. The required trailers must be 2025 or newer models featuring a single axle, four bunks, a weight capacity of 2325, and specific dimensions including an overall length of 17 feet 9 inches and a width of 101 feet. All quotations must be submitted via the OpenGov Procurement Portal by the deadline of October 23, 2026. Delivery is required F.O.B. Destination to 95 Keaa St, Hilo, HI 96720, and the unit price must include all freight, handling, delivery, and applicable taxes. The contract will be awarded to the lowest responsive and responsible offeror who meets the technical specifications. Evaluation factors include price, technical capability, and the vendor's ability to perform according to contract terms. In the event of a tie, preference may be given to businesses producing goods in Hawai'i or those located within the state. Vendors must comply with various legal requirements, including HCE compliance for quotes over 2,500 dollars, non-discrimination policies, and state labor laws. Required documentation for new vendors includes the V8 form, and specific certifications regarding wages and hours are mandatory for procurements exceeding 25,000 dollars.

Hawaii Fire Department

POSTED

DEADLINE

Trailer, Tilt Deck Equipment

Solicitation # 44-27

The New Hampshire Department of Administrative Services is soliciting bids for a one-time purchase of a new Tilt Deck Equipment Trailer. The required trailer must feature a minimum GVWR of 18,400 lbs, a usable deck length of 25 feet for full tilt, and a minimum overall width of 102 inches. Technical specifications include a DOT-compliant LED sealed lighting system, Grade 70 safety chains, and an industrial-grade corrosion-resistant coating equivalent to powder-coat or epoxy-based finishes. All equipment must be new and of the current model year. The contract will be awarded to the responsible vendor who submits a conforming bid at the lowest cost, though equivalent models may be considered if documentation proves they meet or exceed all mandatory performance criteria. The successful vendor must deliver the trailer F.O.B. Destination to the NHDES-Dam Bureau in Concord, New Hampshire, within 60 days of receiving the purchase order. A critical delivery requirement specifies that the end user cannot offload trailers from stacked delivery loads. The award includes a warranty for at least one year or the manufacturer's standard period, whichever is greater. Payment is due 30 days after the later of invoice receipt or final inspection and acceptance by the agency. Bids are due by October 27, 2026, at 10:30 AM Eastern Time and must be submitted via email to the Bureau of Purchase and Property. Vendors must be registered to conduct business in New Hampshire and have a completed Vendor Application Package on file.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

KUV Utility Body InstallationThis subcontract involves the fabrication and installation of specialized enclosed utility bodies for prime contractors working on San Diego County DGS Fleet Services projects. The scope of work requires the procurement or fabrication of a 10ft steel Knapheide or approved equivalent KUV Utility Van enclosed body featuring a low roof, paddle latches, and a sliding rear cab partition, which must be fully integrated onto a Ford E450 chassis. The project is based in San Diego, California, and falls under NAICS code 336212. Interested parties must respond by October 31, 2026, to provide the fully integrated utility bodies as specified for the agency.

POSTED

DEADLINE

Super B Side Dump Pair Equipment SupplyThis subcontract agreement involves the supply of a complete Super B Side Dump Pair for prime contractors supporting heavy equipment procurements for Kneehill County. The scope of work requires the manufacturer or assembler to provide a heavy-duty chassis and side-dump hydraulic systems, ensuring the final assembly is delivered in an operable state. A critical requirement of the contract is that the equipment must be certified to Canadian standards by an organization accredited by The Standards Council of Canada. The solicitation was posted on October 19, 2026, with a response deadline set for November 20, 2026.

POSTED

DEADLINE

Kneehill County-FRT Super B Side Dump Pair

Solicitation # RFT-2027-3201-HT01

Kneehill County is soliciting tenders for the supply of one new Super B Side Dump Gravel Trailer Pair to be delivered Free on Board to the maintenance shop in Three Hills, Alberta. The required equipment must be a standard production model consisting of a tri-axle lead and tandem pup with a minimum gravel capacity of 40 cubic yards, utilizing at least 400 brinell strength steel for radius style boxes. Key technical specifications include 24.5 inch tires on aluminum alloy rims, reflective safety tape meeting federal regulations, and a full mud flap package compliant with the Alberta Traffic Safety Act. The unit must also include a current Alberta CVIP valid for at least 11 months from the possession date and meet all Canadian CMVSS-approved standards for air and electrical requirements. While air disc brakes are preferred, drum brakes are acceptable. Tenders must be submitted in English via the Bids and Tenders eProcurement system by November 20, 2026. Awards will be based on the lowest cost and compliance with all RFT requirements, with a preference for larger capacities and shorter lead times. The contract is governed by the laws of Alberta, and the vendor is responsible for all costs associated with packaging, shipping, and insurance. Acceptance occurs after a visual inspection by the County, with a 10 business day window for notification of non-compliance. Payment may be processed via county credit or debit card upon vendor agreement. The vendor must provide a fully equipped, new unit, as demonstrators or previously used rental units will not be accepted.

POSTED

DEADLINE

DFSBT RFQ Replace ST697G Cargo Trailer / FLEET

Solicitation # BD-27-1021-DFS-DFS01-134576

The Massachusetts Department of Fire Services is soliciting quotes for the replacement of the ST697G Cargo Trailer under solicitation number BD-27-1021-DFS-DFS01-134576. This procurement is specifically targeted toward businesses participating in the Small Business Purchasing Program (SBPP), with priority award consideration given to SBPP vendors who meet or exceed the solicitation criteria. If no responsive SBPP bids are received, the agency will consider non-SBPP businesses. All quotes must be submitted via Commbuys by November 3, 2026, and must explicitly state that all pricing is per Statewide Contract FAC 116. Quotes must remain valid for 90 days, and the final product must be delivered to the Stow, MA location no later than May 14, 2027. The trailer must be bright red, comparable to fire engine red, and adhere to strict Department of Fire Services lettering and safety guidelines. Required markings include Bookman Old Style bold font in specific colors based on vehicle color, with precise placement for the fleet number, vehicle height, and division name. Safety specifications require NFPA-standard reflective red and yellow chevrons covering at least 50 percent of the rear, DOT reflective stripes on the bottom edges of the front and sides, and reflective elements covering at least 25 percent of the front width. The primary point of contact for this procurement is Purchaser Bettina Tersoni.

POSTED

DEADLINE

Knuckle Boom Truck Supplier/DealerThis subcontract involves the supply and delivery of one complete Knuckle Boom Truck for prime contractors supporting Missouri Department of Transportation equipment procurements. The scope of work requires the procurement of a vehicle chassis, the integration and mounting of an IMT 2320RCS articulated crane, and the installation of essential safety equipment, including first aid kits and fire extinguishers. The selected supplier must ensure the vehicle is fully operational and compliant with the Domestic Products Procurement Act before delivery to Ballwin, Missouri. The solicitation was posted on October 19, 2026, with a response deadline of November 17, 2026, falling under NAICS code 336212.

POSTED

DEADLINE

Mobile SCBA Fill Trailer

Solicitation # IFB-129504

The Virginia Department of Fire Programs is soliciting bids for the procurement of one custom-built, fully operational Mobile SCBA Fill Trailer to provide on-site breathing air support for the Chief Safety Officer during emergency response operations. The required trailer must measure 14 ft in length, 80 in in width, and 84 in in height, featuring an all-aluminum or partial aluminum body with a red 0.040 inch aluminum skin and tandem 3500-lb Dexter axles with electric brakes. Key technical specifications include a diesel-driven 6000-psi, 25-CFM breathing air compressor, a four-bank cascade control system, four UN/ISO 6000-psi cylinders, a CO monitor for air quality, and 100 ft high-pressure and low-pressure hose reels. Bidders must ensure cylinders meet ASME standards, as DOT cylinders are not accepted. The contract will be awarded on a grand total basis to the lowest responsive and responsible bidder, with award priority given to DSBSD-certified micro or small businesses. Bids must be submitted electronically via the eVA portal by October 27, 2026, and must include a firm unit price covering all freight and installation charges for FOB destination delivery. The desired delivery timeframe is 90 calendar days after receipt of order. Awardees must comply with the Commonwealth of Virginia Vendors Manual and various anti-discrimination and civil rights laws. Required submission documents include a Vendor Data Sheet, a Small Business Subcontracting Plan, a State Corporation Commission Form, and proof of registration with the Virginia Department of Motor Vehicle Board.

Department of Fire Programs

POSTED

DEADLINE

Naval Information Warfare Systems

POSTED

DEADLINE

16' Box Truck Body Fabrication and InstallationThis subcontract involves the fabrication and installation of a 16 foot aluminum box body for vehicle projects benefiting the Blue Valley Unified School District 229. The technical specifications require the installation of 2 inch nominal flat pine flooring supported by 3 inch I-Beam crossmembers, Utiliplate sidewalls with bonded seams, an aluminum bulkhead featuring a Shindog Door, and a 72 inch roll-up rear door. The final deliverable is a fully upfitted 16 foot aluminum box truck that strictly adheres to ICC regulations and Federal Motor Vehicle Safety Standards. This project falls under NAICS code 336212, with a response deadline set for October 28, 2026.

Blue Valley School District

POSTED

DEADLINE

18' Walk-In Step Truck Body Fabrication and InstallationThis subcontract involves the fabrication and installation of a specialized 18-foot walk-in body for vehicle projects benefiting the Blue Valley Unified School District 229. The scope of work includes the delivery of a fully upfitted mail delivery truck equipped with dash-mounted worktables, a translucent roof, LED lighting, and a 48,000 BTU heater and defroster. Additionally, the contractor is responsible for fitting backup cameras and rear grated step bumpers. All work must strictly adhere to ICC regulations and Federal Motor Vehicle Safety Standards to ensure legal and operational compliance. The project is categorized under NAICS code 336212, with a response deadline set for October 28, 2026.

Blue Valley School District

POSTED

DEADLINE

Dump Body Fabrication and Installation (2-3 Ton)This subcontract agreement involves the fabrication and installation of dump bodies for prime contractors supporting Kneehill County vehicle procurement projects. The scope of work requires the installation of a complete dump body assembly and hydraulic lift systems onto provided 2-3 ton regular cab and chassis units featuring dual rear wheels, culminating in the delivery of a fully completed dump truck. The project is managed by Kneehill County under NAICS code 336212. Interested parties must submit their responses by the deadline of November 20, 2026, following the posting date of October 16, 2026.

Kneehill County

POSTED

4 days ago

DEADLINE

in about 1 month

AI Contract Overview

Solicitation FA7037-10-R-8006, issued by the Department of Defense, outlines the requirements for a customized ATV and trailer operations center. The trailer must be at least 24 feet in length and designed to accommodate a selected ATV and four fold-down workstations, each equipped with nearby 120V power outlets. Key technical specifications include a generator enclosure with an exhaust elbow, a power control panel with meters and breakers, and a diesel fuel tank with a capacity between 18 and 20 gallons. The interior configuration requires the removal of the rear driver side seat to install a single 19 inch shock mounted rack extending from floor to ceiling. The rear cargo area must be designed with custom holders to accommodate two Honda EU2000i generators. Additionally, the vendor must provide between eight and twelve solid wood storage cabinets measuring approximately 2 feet cubed. The delivery timeline is set for 60 days after the receipt of the order.

General Info

Agency

Department Of Defense → FA7037 Amic Det 2 Jbsa

Contract Value

$152,989.69

NAICS

336212 - Truck Trailer Manufacturing

Place of Performance

Contractor's Facility, TX, USA

Set-Aside

NONE

Awardee

EH CONCEPTS LTD

Award Issued Date

07/28/2010, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseAwarded

PostedJun 14

Presolicitation

Notice updatedJun 14

Response deadline time changed from 9:00 PM UTC to 8:00 PM UTC on Jul 6, 2010. The notice description changed.

Type ChangedJul 2

Presolicitation → Solicitation

AwardedJul 28

Contract was awarded

Submission Closed

07/28/2010, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA7037 Amic Det 2 Jbsa

Contacts1 person available

OfficeSAN ANTONIO, TX, 78243-7091, USA

Organization / AgencyDepartment Of Defense → FA7037 Amic Det 2 Jbsa

Office AddressSAN ANTONIO, TX, 78243-7091, USA

Contacts

William H KaufmanContracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

The following clarifications/amendments to the specifications are incorporated into the solicitation: 1) Page 3 of the specification calls for the vendor to build a generator enclosure, exhaust elbow to direct exhaust to rear outside of the trailer, 20 gallon diesel fuel tank, (underbody mounted), and a power control/breaker panel that includes voltage and current meters and AC/DC circuit breakers. The 20 gallon diesel fuel tank may be an 18 gallon tank. 2) The specification calls for twelve solid wood storage cabinets, each approximately 2' X 2'X 2'. Due to the projected size of the ATV, the specification is changed to provide a minimum of eight (8) cabinets, with twelve (12) as the maximum. 3) The customer confirms that the rear driver's side seat needs to be removed with a 19" shock mounted rack from floor to ceiling. This is the only rack. In the rear cargo area, they simply wanted to accommodate two (2) Honda EU2000i generators. The offeror needs to take into account the generator specifications and create "cupholders" with matching specifications. 4) The size of the trailer is to be 24' minimum. The trailer compartment shall accommodate the ATV that the offeror selects. The offeror shall design a layout for the operations center that accommodates the four fold-down workstations as described in the specifications. The design must include 120V power outlets in close proximity to each workstation as indicated on page 4 of the specification. Delivery date is changed to 60 days after receipt of order. The due date for offers remains UNCHANGED at 6 Jul 10at 3:00 p.m. CDT.