This Solicitation opportunity from Department Of Defense was posted on April 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CYLINDER SLEEVE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of 209 units of a Cylinder Sleeve part identified by NSN 1650-01-616-9605 and manufacturer part number 90008679 from Meggitt Aircraft Braking Systems, classified as a commercial item. Delivery is required FOB origin within 113 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with precedence over general standards such as ASTM D3951, while packaging and labeling must comply with MIL-STD-129 and DLA Packaging Requirements. The item is designated as a Critical Application Item, and any deviations from the engineering drawing package must be submitted to a Material Review Board for disposition prior to shipment. The contractor must certify full compliance with all referenced manuals, specifications, and standards, and is responsible for understanding and meeting all manufacturing requirements without reliance on government guidance. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and verification levels are tied to attribute classifications. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and physical identification of items must adhere to RQ017 standards. Unit of issue is each, with pricing set at $209.00 per unit for a total contract value of $43,681. The item is not subject to Unique Identification per customer request, though removal of government identification from non-accepted supplies is required. The delivery address is Tinker AFB, Oklahoma, with transportation governed by DLA procedural notes. The solicitation opened on April 23, 2026, with responses due by May 1, 2026, under contract number SPE4A5-26-T-094F.
General Info
Agency
NAICS
Place of Performance
3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
CYLINDER SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TECHNICAL DATA PACKAGE ENGINEERING, NOTES DATES 18 JUN 2013 NOTES 1
THRU 3 NOT APPLICABLE 4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC.
WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT
BE FURNISHED UNLESS SO INDICATED. 5. MATERIAL REVIEW BOARD: A. OO-ALC
LANDING GEAR ENGINEERING RETAINS ALL RIGHTS TO REVIEW AND ACCEPT
MATERIAL REVIEW BOARD (MRB#S) DISPOSITIONS PRIOR TO SHIPMENT OF
SPE4A5-26-T-094F
SECTION B
DISCREPANT ITEM. ALL DEVIATIONS, MINOR AND MAJOR, FROM THE ENGINEERING
DRAWING PACKAGE SHALL BE SUBMITTED FOR MRB DISPOSITION. B. PRIOR TO
CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN
WRITING FULL COMPLIANCE WITH MANUALS, SPECIFICATIONS AND STANDARDS
CALLED OUT AND REQUIRED FOR THE MANUFACTURE OF THIS CONTRACTED LANDING
GEAR COMPONENT/ASSEMBLY. CONTRACTOR IS RESPONSIBLE TO COMPLETELY SEARCH
THESE MANUALS, SPECIFICATIONS AND STANDARDS AND FULLY UNDERSTAND THE
REQUIREMENTS NECESSARY TO MANUFACTURE LANDING GEAR COMPONENTS. ANY
QUESTIONS CAN BE FORWARDED TO OO-ALC LANDING GEAR ENGINEERING......
.
CRITICAL APPLICATION ITEM
MEGGITT AIRCRAFT BRAKING SYSTEMS 0B9R9 P/N 90008679
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015657194 0001 EA 209.000
NSN/MATERIAL:1650016169605
DELIVERY (IN DAYS):0113
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A5-26-T-094F
SECTION B
PR: 7015657194 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:08/23/2026 Original Required Delivery Date:01/20/2027
SPE4A5-26-T-094F NSN/Part Number: 1650-01-616-9605 Quantity: 209 EA Purchase Request: 7015657194QTY: 209 Delivery: 113 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS