Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

D--Fleet 3 Camera System NPS Patrol Vehicles

Active

140P4226Q0045Federal

Response Deadline08/13/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of the Interior, through its office in Flagstaff, Arizona, has issued a notice of intent to award a sole source contract for the Fleet 3 Camera Systems to be installed on NPS Patrol Vehicles. The contract encompasses all required hardware, five years of software licensing including fleet-wide licenses and unlimited cloud storage per camera, a five-year warranty, full installation and deployment services, and comprehensive training for personnel. The solicitation number is 140P4226Q0045, with a posted date of August 3, 2026, and a response deadline of August 13, 2026. The NAICS code 334310 identifies this procurement within the navigational, measuring, electromedical, and control instruments manufacturing sector. The primary point of contact for inquiries is Catherine Robertson, reachable via email at catherine_robertson@ios.doi.gov or by phone at 703-787-1479. The systems are intended for use by the National Park Service patrol fleet and will be deployed across designated operational areas under the Department of the Interior’s jurisdiction.

General Info

Sole source award for Fleet 3 Camera Systems with five-year licensing, warranty, installation, and training for NPS patrol vehicles.

Agency

Department Of The Interior → Imr ARIZONA(12400)View Agency

NAICS

334310 - Audio and Video Equipment ManufacturingView NAICS

Place of Performance

AZ

Set-Aside

NONE

Documents

(1)

B01_Synopsis_-_NOI_Sole_Source_1.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedAug 3

special-notice

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 04:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Imr ARIZONA(12400)

Contacts1 person available

OfficeFLAGSTAFF, AZ, 86001, USA

Organization / Agency

Department Of The Interior → Imr ARIZONA(12400)

View Agency Profile

Office AddressFLAGSTAFF, AZ, 86001, USA

Contacts

Robertson Catherine

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

NOTICE OF INTENT TO ISSUE A SOLE SOURCE CONTRACT FOR THE LAW ENFORCEMENT VEHICLE - FLEET 3 CAMERA SYSTEMS, TO INCLUDE ALL NECESSARY HARDWARE, 5 YEARS OF ALL NECESSARY SOFTWARE LICENSING TO INCLUDE FLEET LICENSE AND UNLIMITED CLOUD STORAGE PER CAMERA, 5 YEAR WARRANTY, INSTALL, DEPLOYMENT AND TRAINING OF THE SYSTEMS.

Similar Contracts

Same NAICS industry code

HEADSET, ELECTRICAL

Solicitation # SPE7M0-26-T-027G

The contract is for the procurement of 20 electrical headsets with NSN 5965-01-686-4435 under solicitation number SPE7M0-26-T-027G, which is a total small business set-aside classified under NAICS code 334310. Delivery is required within five days of award, and the solicitation was posted on August 3, 2026, with responses due by August 14, 2026. The acquisition is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense, with Audrey Acuna as the primary point of contact. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The alternate offeror must submit a complete data package for both the approved and alternate parts. Government identification must be removed from non-accepted supplies, and the entire procurement falls under federal procurement rules with no data available on specific packaging requirements beyond general DLA compliance.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

HEADSET, ELECTRICAL

Solicitation # SPE7M5-26-T-365R

The contract is for the procurement of 413 units of an electrical headset with NSN 5965-01-682-1143 under purchase request 7017696600, with a delivery requirement of 105 days after contract award. The solicitation number is SPE7M5-26-T-365R, issued on August 3, 2026, with responses due by August 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The item falls under NAICS code 334310 and is being procured by the Department of Defense’s Active Devices Division with performance located in New Cumberland, Pennsylvania, zip 17070-5002. Primary point of contact is Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245. Government identification must be removed from any non-accepted supplies, and no additional data is currently available for this requirement.

ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

2026 A/V SYSTEM COURTROOM TECHNOLOGY UPGRADE

Solicitation # USDCPR-_26731

The U.S. District Court for the District of Puerto Rico is soliciting offers for a firm fixed price contract to upgrade audiovisual systems in one, two, or three courtrooms located at 300 Calle del Recinto Sur, San Juan, Puerto Rico. The project involves the removal and inventory of existing equipment, elimination of obsolete cabling, and installation of new audio, video, control systems, and ancillary hardware in accordance with detailed drawings and the Statement of Work. Performance is restricted to weekday business hours, and all personnel must complete HSPD-12 background checks prior to site access. The contract requires comprehensive documentation deliverables including as-built drawings, functional block diagrams, test data, operational manuals, and warranty information. Compliance with industry standards such as NFPA 70-2020, ISO 9001-2015, and various FCC, UL, and SMPTE specifications is mandatory, and the system must function without warranty-related interventions for 30 consecutive days after final acceptance. Inspection and acceptance occur on-site, with the Government retaining authority to approve or reject performance based on technical conformance. The solicitation follows a Lowest Price Technically Acceptable evaluation method, where proposals must first meet minimum technical criteria to be eligible for award, with price being the sole deciding factor among qualified respondents. Contractors must submit a complete proposal including one original, two hard copies, and one PDF electronic copy with indexed bookmarks, along with completed clause fill-ins for Key Personnel, Contracting Officer’s Representative, and Insurance requirements. The Project Manager is designated as a key personnel position, requiring submission of resumes with full employment history, certifications, and citizenship details; any substitution requires 30 to 60 days’ advance notice and written approval based on clearance status. Packaging must protect equipment from salt, moisture, and extreme temperatures during transit, and all work must be performed in compliance with Judiciary access rules and safety protocols. No pricing information is provided in the solicitation, precluding a contract value estimate, but options exist for additional courtrooms. The response deadline is August 7, 2026, and all submissions must be sealed with electronic copies sent via email or CD to the designated Contracting Officer.

Puerto Rico US District Court

POSTED

about 12 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # N0010426QND96

This contract calls for the repair of four specific military components: 14 units of NSN 5965-015439997 (MICROPHONE, CRYSTAL), 3 units of NSN 5845-015542778 (PROCESSOR SIGNAL SO), 3 units of NSN 5998-016040142 (CIRCUIT CARD ASSEMB), and 1 unit of NSN 6130-016210095 (POWER SUPPLY), with no new procurement allowed. All repairs must strictly follow the original manufacturer’s technical documentation, specifications, and approved repair practices, and must be performed by authorized distributors who can prove their legitimacy. Each item must be marked per MIL-STD-130 and comply with strict mercury-free requirements, prohibiting any metallic mercury or contamination, with exceptions requiring formal written approval. The contract mandates Government-Source Inspection and Acceptance, with all inspection records retained for one year past final delivery, and requires adherence to electrostatic discharge controls per ANSI/ESD S20.20 for the circuit card assembly, along with security clearance obligations for that specific item. Repair turnaround time is capped at 524 days from physical receipt of the failed unit as recorded in the Commercial Asset Visibility system, and contractors must submit detailed quotes including firm-fixed pricing, beyond-repair costs, throughput capacity, and expected repair duration. Contractors must provide their CAGE code, repair facility CAGE, packaging CAGE, and new procurement cost estimates if known, submitting proposals solely via email to Rachel Kern at the designated Navy address. The solicitation includes an option to increase the order by up to 100% within 365 days after award at the same price, and contractors are asked to include pricing for this option. Induction of assets must occur within 120 days of award, and any late deliveries require bilateral agreement. The contract incorporates numerous Federal and DoD clauses covering cybersecurity maturity, Buy American requirements, small business subcontracting, security prohibitions, and mandatory use of Workflow Pro tools. All documents are considered issued upon electronic transmission, and the Government retains full rights to inspection and acceptance. Packaging must meet MIL-STD-2073, and distribution of technical documents is restricted per defined codes, with some requiring special authorization for access. This procurement falls under emergency acquisition flexibilities, emphasizing urgency and

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

BLDG 511 AUDIO VISUAL (AV) UPGRADE

Solicitation # W50S9H26QA030

This solicitation, identified as W50S9H26QA030, is a combined synopsis and solicitation for a 100% small business set-aside under NAICS code 334310 with a 750-employee size standard, seeking qualified small businesses to provide a complete audio-visual system upgrade for Building 511 at Camp Douglas, Wisconsin. The contractor must design, procure, install, configure, and test a fully integrated AV system capable of supporting video teleconferencing, local presentations, room-status indication, and centralized control, with all equipment required to be Trade Agreements Act compliant. Offers must be submitted via email only to WI.CRTC.VF.Contracting@us.af.mil by 12 August 2026 at 1:00 PM CDT, and are contingent on the submission of a completed and signed Standard Form 1449 along with any additional provisions mandated by FAR 52.212-1. All offerors must be actively registered in the System for Award Management at the time of submission. A site visit is scheduled for 22 July 2026 at 9:00 AM CDT, and requests to attend must be submitted by 20 July 2026 at 11:00 AM CDT. Questions regarding the solicitation must be directed to the same email address by 3 August 2026 at 1:00 PM CDT, with any responses to be posted approximately two business days after the question deadline. Late submissions will not be accepted under FAR 52.212-1(f), and no contract value, evaluation criteria, detailed specifications, or delivery timelines are provided beyond the general scope of work referenced in the attached Statement of Work and SF 1449.

W7N8 Uspfo Activity Wiang Crtc

POSTED

about 12 hours ago

DEADLINE

SWITCH ASSEMBLY Manufacturing and DeliveryThe contract requires the manufacture, testing, packaging, marking, and delivery of a single SWITCH ASSEMBLY identified by NSN 5930-01-643-6049 and Part Number QMGRD0196-A1, all in full compliance with applicable military specifications including MIL-DTL-28786 for the switch assembly itself, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking and labeling. The work must be performed to exacting defense standards, ensuring the unit meets technical, environmental, and logistical requirements for military use. The item is destined for delivery to a military location with a FPO address and ZIP 09520, indicating overseas deployment or military facility handling. This is a subcontract solicitation posted on August 2, 2026, with responses due by August 13, 2026, under the NAICS code 334310 which classifies it under Electronic Component and Product Manufacturing. The procurement is managed by the Electrical Devices Division within the Department of Defense, and no set-aside status is specified, meaning it is open to all qualifying contractors. The award will be processed through the DLA Dibbs platform, and the contractor must be prepared to adhere to rigorous defense supply chain protocols, including documentation, traceability, and inspection readiness, to ensure the assembly is fully compliant and ready for immediate military integration upon delivery.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Defense-Grade Headset-Microphone SupplyThe contract calls for the manufacture or supply of ten units of RF-3020-HS031 headset-microphones designed to meet stringent military specifications, ensuring durability, reliability, and performance under demanding operational conditions. Each unit must be packaged in full compliance with MIL-STD-2073-1E packaging standards, which govern the protection, handling, and preservation of defense-related equipment during storage and transit. Additionally, all items must be marked according to MIL-STD-129 requirements to ensure proper identification, tracking, and inventory management throughout the military supply chain. The solicitation is classified as a subcontract under NAICS code 334310, indicating it pertains to the manufacturing of communications equipment, and is managed by the Active Devices Division under the Department of Defense. Responses are due by August 13, 2026, with the opportunity posted on August 2, 2026, and all deliveries must fulfill the exact technical and regulatory criteria outlined without exception.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Dynamic Microphone Manufacturing and SupplyThe contract requires the manufacture, testing, and delivery of eleven military-specification dynamic microphones under NSN 5965008456325, fully compliant with MIL-DTL-21393 standards and aligned with environmental regulations that exclude ozone-depleting substances and mercury. All units must undergo rigorous verification to ensure operational reliability and durability under demanding military conditions without the use of restricted materials. The work is to be performed under a subcontract arrangement governed by the Department of Defense’s Active Devices Division, with final delivery and performance targeted at Robins Air Force Base, Georgia, with the zip code 31098-1887. The solicitation window opened on August 2, 2026, and responses must be submitted by August 13, 2026, with the NAICS code 334310 classifying this as an electronic component manufacturing activity. No set-aside provisions are specified, indicating the opportunity is open to any qualified subcontractor. While no point of contact is listed, the official bidding portal is accessible via the provided DIBBS link, which serves as the central repository for all submission and inquiry requirements related to this procurement.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Radio Frequency (RF) Cable Assembly ManufacturingThe contract calls for the manufacture of five radio frequency cable assemblies compliant with military specifications, encompassing full lifecycle activities from design validation and component sourcing to final assembly and rigorous testing. All work must adhere strictly to Defense Logistics Agency requirements and comply with International Traffic in Arms Regulations and Export Administration Regulations, ensuring proper handling of controlled technical data and defense-related hardware. The assemblies are to be produced to meet exacting performance and quality standards expected in military applications, with full documentation and traceability required throughout the process. The contract is structured as a subcontract under the NAICS code 334310 for Other Electronic Component Manufacturing, issued by the ASC Commodities Division of the Department of Defense. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. Responses are due by August 10, 2026, and the solicitation was posted on August 2, 2026. All parties involved must maintain strict adherence to export control mandates and military compliance protocols, with no set-aside provisions indicated for small or disadvantaged businesses.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract requires the full lifecycle manufacturing of 60 military-spec electrical cable assemblies designated by NSN 6150-01-555-9768, covering all phases from design validation and component sourcing through assembly, testing, and final compliance verification. All work must adhere strictly to Defense Logistics Agency technical standards, ensuring the assemblies meet rigorous performance, durability, and safety requirements for military use. The production must be completed in accordance with established quality control protocols and documented to demonstrate full traceability and conformity to specifications. The solicitation is classified as a subcontract under NAICS code 334310, with performance location set at New Cumberland, Pennsylvania, zip code 17070-5002. The opportunity was posted on August 2, 2026, and responses are due by August 10, 2026. The contracting entity is the ASC Commodities Division under the Department of Defense, and all submissions must be made through the designated DIBBS platform. No specific set-aside criteria are indicated, and there is no point of contact listed in the provided details.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Headset-Microphone Units (NSN: 5965017104489)The contract involves the supply and delivery of 18 commercial off-the-shelf headset-microphone assemblies identified by National Stock Number 5965017104489, all of which must meet stringent defense packaging, labeling, and hazardous materials handling standards. These units are intended for use within military operations and require full compliance with defense-specific requirements to ensure interoperability, safety, and logistical compatibility across the Department of Defense ecosystem. The procurement is structured as a subcontract under NAICS code 334310, which pertains to communications equipment manufacturing, and is managed by the Active Devices Division of the Department of Defense. The solicitation was posted on August 2, 2026, with a response deadline set for August 13, 2026, indicating a tight turnaround for interested vendors to submit proposals. The place of performance is specified as Tracy, California, with a ZIP code of 95304-5000, suggesting that delivery logistics and final inspections may be coordinated through this location. Although no point of contact or specific set-aside details are provided, the contract is publicly accessible via the DIBBS portal, and participants must ensure adherence to all defense contracting requirements, including documentation, packaging protocols, and hazardous material compliance, to qualify for award.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

HEADSET-MICROPHONE

Solicitation # SPE7M5-26-T-363W

The contract specifies the procurement of 10 headset-microphone units with NSN 5965-01-606-8246 and part number RF-3020-HS031 from L3Harris Technologies Inc., under solicitation SPE7M5-26-T-363W, with a unit price of $10.00 and a total contract value of $100.00. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods including dry preservation, D3 unit containers, and no cushioning materials, and palletization must adhere to DLA packaging standards. The item is to be shipped via the fastest traceable means, excluding parcel post, to a U.S. Army facility in Drawsko Pomorskie, Poland, with required markings and special handling per IP025 for hazardous materials, though no special marking is mandated. The required delivery date is July 29, 2026, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect at the time of solicitation. The contracting activity is the Department of Defense’s Active Devices Division, and all government-specific identifiers, logistics codes, and administrative data are included for official use.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of The Interior → Imr ARIZONA(12400)

Same awarding agency

Green and Sustainable Materials SupplyThe contract under the title Green and Sustainable Materials Supply is a small business set-aside subcontract aimed at procuring environmentally preferable construction materials, including low-VOC sealants, piping with recycled content, and sustainable insulation, all aligned with green procurement standards. The opportunity is open exclusively to small businesses as defined by the SBA’s Total Small Business Set-Aside rules, and is classified under NAICS code 423330 for building material and supplies merchants. All responses must be submitted by August 20, 2026, at 9:00 PM Eastern Time, following the posting date of July 21, 2026. The contracting agency is the Department of the Interior, specifically the Imr ARIZONA(12400) office, with performance expected to occur within the United States, though specific location details are not provided. The contract emphasizes compliance with sustainability criteria and the use of eco-friendly materials to support federal green building initiatives.

Roofing, Siding, and Insulation Material Merchant Wholesalers

POSTED

DEADLINE

General Contracting and Project ManagementThe contract is a small business set-aside under the NAICS code 236220 for general contracting and project management services, exclusively available to small businesses as defined by the SBA. The prime contractor is tasked with end-to-end project execution including coordination of subcontractors, ensuring regulatory compliance, maintaining project schedules, and delivering outcomes in accordance with federal contracting requirements. The opportunity was posted on July 21, 2026, with proposals due by August 20, 2026, and is managed by the Department of the Interior under the agency designation IMR ARIZONA(12400). Performance location details are not specified, and no point of contact information is provided in the solicitation. The contract type is a subcontract, indicating it will be issued by a prime contractor awarded under this solicitation rather than directly by the government.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Radon Mitigation System InstallationA subcontract has been issued for the installation of a passive or active radon mitigation system using sub-slab depressurization, vent stacks, and sealing of entry points in accordance with EPA guidelines. The work is governed under NAICS code 238220 and is set aside entirely for small businesses as defined by the SBA, ensuring only eligible small business contractors may respond. The opportunity was posted on July 21, 2026, with a response deadline of August 20, 2026, and is managed by the Department of the Interior under the agency identifier IMR ARIZONA. The place of performance and specific location details are not specified, indicating the work could occur at any site under the agency’s jurisdiction requiring radon mitigation. All proposals must comply with established environmental and safety standards to ensure effective radon reduction and long-term occupant protection.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Interior Demolition and Site PrepThe contract entails selective interior demolition work aimed at gaining access to sewer lines, requiring precise removal of specific interior elements while safeguarding surrounding areas from damage. All debris generated during the demolition must be properly removed, and the site must be thoroughly cleaned to meet required standards. Work must be executed with care to protect undisturbed portions of the structure, ensuring minimal impact to non-targeted areas. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses recognized by the SBA are eligible to bid. The NAICS code 238990 applies, covering other specialized construction activities not elsewhere classified. The opportunity was posted on July 21, 2026, with responses due by August 20, 2026, and is managed by the Department of the Interior under the agency designation Imr ARIZONA. The place of performance and specific location details are not provided in the available data.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Sanitary Sewer Line Replacement (PVC Piping)The contract involves the excavation and replacement of damaged sanitary sewer lines with new PVC piping compliant with ASTM D3034 standards, encompassing all necessary steps including trenching, verification of proper slope, and secure connection to the existing system. The work must be executed to ensure structural integrity, proper drainage, and long-term functionality of the sewer network, adhering to industry specifications for material and installation. This is a total small business set-aside subcontract under NAICS code 238220, managed by the Department of the Interior through its Imr ARIZONA(12400) office. The solicitation was posted on July 21, 2026, with a response deadline of August 20, 2026, at 9:00 PM. The place of performance and specific location details are not provided, and no point of contact information is listed. Interested parties must respond through the SAM.gov portal before the deadline to be considered.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Lead-Based Paint AbatementThis contract pertains to the safe removal or encapsulation of lead-based paint during renovation activities, requiring strict compliance with EPA Renovation, Repair, and Painting (RRP) rules and HUD guidelines. All work must include pre-renovation lead testing, thorough containment procedures to prevent contamination, and certified disposal of hazardous materials to ensure environmental and public health safety. The solicitation is designated as a Total Small Business Set-Aside under SBA regulations, meaning only small businesses qualify to bid, and it falls under NAICS code 562910 for remediation services. The opportunity was posted on July 21, 2026, with a response deadline of August 20, 2026, and is issued as a subcontract under the Department of the Interior, specifically through the Imr ARIZONA entity. Performance location details are unspecified, and the contract is accessible via the SAM.gov platform.

Remediation Services

POSTED

DEADLINE

Asbestos Abatement and Hazardous Material HandlingThe contract is for asbestos abatement and hazardous material handling under a total small business set-aside, meaning only small businesses are eligible to compete. It requires the identification, containment, and safe removal of asbestos-containing materials in strict accordance with OSHA and EPA regulations. This includes comprehensive air monitoring during all phases of work, implementation of protective measures for workers, and proper disposal of hazardous waste in approved facilities. The work is associated with the Department of the Interior through its organization Imr Arizona and is classified under NAICS code 562910, which covers remediation services. The solicitation was posted on July 21, 2026, with a response deadline of August 20, 2026, and is structured as a subcontract, indicating it supports a larger procurement effort. Specific location details for performance are not provided in the data, but compliance with federal environmental and safety standards is mandatory.

Remediation Services

POSTED

DEADLINE

REPLACE SANITARY SEWER RF HOUSE 52C

Solicitation # 140P1526Q0118

The contract is a total small business set-aside under FAR 19.5 for the replacement of a sanitary sewer line at an employee residence within the Rainbow Forest District of Petrified Forest National Park in Arizona, identified by solicitation number 140P1526Q0118 and assigned NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors. The effort is a firm fixed-price construction project with a performance period running from September 1, 2026, through January 30, 2027, and the solicitation closed for responses on August 20, 2026. All submissions must be submitted as a single PDF file named “QUOTE PACKAGE” via email to the contracting officer, Jessica Owens, and are restricted to a 25 MB attachment size limit. The contract requires strict adherence to technical specifications detailed in 275 pages of attachments including drawings, asbestos and lead surveys, bid schedules, wage determinations, and environmental compliance standards such as ASTM D3034 for PVC piping and OSHA 29 CFR 1926.1101 for asbestos handling. Material handling, packaging, and storage must comply with ASTM D5834 for recyclable materials, manufacturer specifications, and NFPA 70 standards for labeling, with preservation protocols requiring protection from moisture, sunlight, and temperature extremes. The contract incorporates numerous FAR clauses covering whistleblower rights, executive compensation reporting, suspension and debarment protections, and prompt payment requirements for construction, with multiple clauses containing deviations effective through 2026. Payment is governed by the Invoice Processing Platform (IPP), not WAWF, and follows fixed-price construction payment terms with provisions for progress payments and accelerated payments to small business subcontractors. Invoicing and contract administration are managed directly by the Contracting Officer, with no designated COR or COTR named. Inspection and acceptance occur onsite and are based on compliance with contract documents, applicable standards including ASTM E329 and ACI 117, and manufacturer performance criteria. Offerors must demonstrate technical capability, prior relevant experience within the last five years, and small business status to be eligible, with awards determined sequentially on price, then technical merit, then experience, using a best value trade-off approach. Green procurement requirements mandate the use of environmentally preferable products unless excluded by unavailability, cost, or performance constraints. All submissions must include complete representations regarding UEI,

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

56--GLCA PURCHASE TRAIL SUPPLIES

Solicitation # 140P1526Q0116

The contract for GLCA Purchase Trail Supplies is a firm-fixed price commercial solicitation issued under Standard Form SF-1449 by the Department of the Interior, specifically the Imr Arizona office of the National Park Service, targeting the Glen Canyon National Recreation Area. The procurement is a 100% set-aside exclusively for Women-Owned Small Businesses, Economically Disadvantaged Women-Owned Small Businesses, and 8(a) concerns, with a NAICS code of 484220 indicating specialized freight trucking. Offers must be submitted electronically via email by August 7, 2026, at 5:00 PM Mountain Time, and all bidders are required to maintain an active registration in the System for Award Management (SAM) with a valid Unique Entity Identifier, alongside compliance with small business size standards. The contract requires delivery of trail and campground supplies—including specific Rockart items such as 5 kiosks with gable roofs and green shingles, one aluminum assembly fixture, and a lockable fee deposit box—delivered FOB destination to 130 NPS Maintenance Rd, Wahweap, AZ, no later than October 12, 2026, within 45 calendar days of award. All items must be new, unused, commercially available products meeting industry quality and safety standards, with no substitutions permitted for name-brand items listed in Appendix A. Evaluation will proceed under a lowest price technically acceptable (LPTA) methodology, where offers are first screened to ensure they contain sufficient information for meaningful evaluation, and then awarded based on the lowest total price, including options, provided the technical requirements are met. Price reasonableness will be assessed through comparisons to other competitive quotes and the government’s independent estimate, with scrutiny for unbalanced pricing across contract line items. Packaging must remain in original manufacturer wrapping, and any damaged goods will be rejected and replaced at no cost to the government. Inspection occurs upon delivery, requiring correct quantities, proper product type, and absence of visible damage, with non-conforming items to be replaced within 14 calendar days. Contractors must comply with Buy American requirements, certifications on recovered materials, child labor practices, and security provisions, including safeguarding information systems. Invoicing is mandatory through the U.S. Treasury’s Invoice Processing Platform (IPP), requiring prior registration and submission of electronic invoices with attached PDFs showing contract number, invoice date, service dates, and vendor letterhead. Contract administration is handled by Donald Tremble, Contracting

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Logistics and Delivery of Government Trail SuppliesThe contract requires the timely transportation and final delivery of all trail and campground supplies to Wahweap, Arizona, with full performance mandated within 45 days of contract award. Delivery terms are specified as FOB Destination, meaning the contractor assumes all responsibility, including costs and risks, until the goods are physically delivered to the designated location in Wahweap. The work falls under NAICS code 484220, classifying it as a transportation and logistics subcontract related to freight trucking. The solicitation is issued by the Department of the Interior through its Arizona office and is open for responses until August 7, 2026, with a posting date of July 1, 2026. No specific set-aside designation is provided, and the contract is categorized as a subcontract, indicating it may be awarded to a vendor supplying services to a prime contractor or managing logistical operations under a broader government effort.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 1 month ago

DEADLINE

Trail Assembly Fixtures and Hardware KitsThe contract titled Trail Assembly Fixtures and Hardware Kits calls for the supply of specialized metal brackets, fasteners, and mounting systems specifically engineered for trail construction and maintenance, with strict adherence to designated brand requirements to ensure compatibility, durability, and safety in outdoor environments. These components are critical for assembling and securing trail infrastructure elements such as signage, handrails, bridges, and erosion control structures, and must meet exacting standards for load-bearing capacity, corrosion resistance, and field-installability under variable weather conditions. The solicitation is categorized as a subcontract under NAICS code 332312, indicating a focus on metal fabrication for structural and functional applications in outdoor construction. The opportunity was posted on July 1, 2026, with a response deadline of August 7, 2026, and is managed by the Department of the Interior through its Arizona-based office identified as IMR ARIZONA(12400). No set-aside provisions are indicated, meaning the contract is open to all eligible subcontractors regardless of business size or classification. Performance is expected to support federal trail projects across varying geographic locations, though no specific place of performance is detailed. Interested parties must submit proposals prior to the deadline through the SAM.gov portal, ensuring compliance with all technical, branding, and delivery specifications required for integration into official trail development and maintenance programs.

Fabricated Structural Metal Manufacturing

POSTED

about 1 month ago

DEADLINE

Campground Fee Deposit Boxes and Secure Payment SystemsThe contract seeks the supply of secure, weather-resistant fee deposit boxes designed for collecting cash and permits at campgrounds within the recreation area. These units must withstand harsh outdoor conditions and provide tamper-resistant storage to ensure the integrity and safety of collected payments. The boxes are intended for use across multiple campground sites and must support efficient, reliable, and accountable fee collection processes without requiring constant manual oversight. The equipment should be durable, easy to install, and compatible with existing operational workflows at federal recreation sites. Issued as a subcontract under NAICS code 332215, the opportunity is open for responses through August 7, 2026, and is managed by the Department of the Interior through its Arizona office. Performance is expected to occur across various locations within the recreation area, though specific site details are not outlined. The procurement emphasizes security, resilience, and functionality, requiring vendors to deliver products capable of long-term exposure to environmental stressors such as UV radiation, precipitation, temperature extremes, and potential vandalism. All submitted solutions must meet strict standards for reliability and maintenance ease to support ongoing operational needs without undue service demands.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 1 month ago

DEADLINE