This Solicitation opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DATUM BOX ASSY

Closed

SPE4A6-26-T-13CSFederal

Submission Closed08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335999

New

DIBBS

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-28QB

This contract is for the procurement of electrical insulation tape under solicitation SPE4A6-26-T-28QB for the Department of Defense ASC Commodities Division. The requirement consists of four rolls of material identified by NSN 5970-00-944-5015, with approved part numbers from Saint-Gobain Performance Plastics Corp, Rogers Corporation, and Hawkeye International. This is designated as a critical application commercial item with a non-extendable shelf life of 18 months. Delivery is required within 20 days after receipt of order, with FOB destination for both inspection and acceptance. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, and requires sampling in accordance with MIL-STD-1916 or ASQ H1331. All shipments must comply with RP001 packaging requirements and include specific shelf-life marking.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-27CU

Solicitation SPE4A6-26-T-27CU is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of electrical insulation tape, identified by NSN 5970-00-480-1329. The requirement consists of multiple line items with quantities ranging from 1 to 20 rolls, with required delivery dates scheduled between August 28 and September 8, 2026. Delivery is required within five days of the award, with FOB, inspection, and acceptance all set at the destination. Shipments are directed to various locations, including the USS Shoup DDG 86, the DLA LMP Zone 1 depot in Texas, the Lockheed Martin Distribution Center in Georgia, ASD Oceana in Virginia, and the Base Naval de Rota in Spain. The contractor must adhere to strict quality and packaging standards, including sealing each tape in a waterproof polyfilm bag and packing 10 to 12 rolls per intermediate container. All marking must comply with MIL-STD-129, specifically using Special Marking Code 32 for Type I shelf-life items, which have a non-extendable shelf life of 18 months. The use of mercury or mercury compounds is strictly prohibited in all preservation, packaging, and marking. Technical and quality requirements are further governed by the DLA Master List and RP001 packaging requirements. Evaluation for award will consider price, with a preference for certified HUBZone Small Business Concerns. Offers utilizing additive manufacturing processes are ineligible for award. The procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity standards for safeguarding covered defense information.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Electrical Contacts (NSN 5999-01-132-8787)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Special Purpose Branched Cable Assemblies

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Battery Box Manufacturer/Supplier

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Supplier of Electromagnetic Relays (NSN 5945-01-136-7909)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Electrical Caps (NSN 5999-00-033-6574)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Electrical Solenoids (NSN 5945-00-369-0865)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sleeve Bushings (NSN 3120011153346)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

UPS Preventative Maintenance Services

Solicitation # 36C24727Q0028

The Department of Veterans Affairs, specifically Network Contract Office 7, is seeking a provider for UPS Preventative Maintenance Services under solicitation number 36C24727Q0028. This is a combined contract opportunity set aside as a sole source for Service-Disabled Veteran-Owned Small Businesses under NAICS code 335999. The services will be performed in Dublin, Georgia, with the primary point of contact being Quentin Deloney. The solicitation was posted on September 11, 2026, and requires a response by September 22, 2026, at 5:00 PM. Interested parties should refer to the attached documentation for the full scope of the solicitation requirements.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

59--INSULATION SLEEVING,EL

Solicitation # SPE4A6-26-U-4183

Solicitation SPE4A6-26-U-4183 is a request for quotations issued by the ASC Commodities Division of the Department of Defense for the procurement of electrical insulation sleeving, identified by NSN 5970010203420. This is a Women-Owned Small Business set-aside under NAICS code 335999. The government intends to award a unilateral Simplified Indefinite-Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum ceiling of 350,000.00 dollars. The estimated annual quantity is 474 units, with a guaranteed minimum of 47 units and an expected average of two orders per year. Delivery is required within 117 days after order, with shipping to various CONUS and OCONUS DLA Depots under FOB Origin terms. The material must be procured in one continuous length on a reel or spool and marked according to MIL-STD-129. Packaging must comply with RP001 and the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Award will be based on the most advantageous offer considering price and other factors, though items produced via additive manufacturing are ineligible. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotes must be submitted electronically via DIBBS by September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 13 days

AI Contract Overview

The contract is for the procurement of three Datum Box Assemblies under NSN 6350-00-932-5548 with a total value of $17,965.26, to be delivered FOB Origin to San Diego, CA, within 128 days after receipt of order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with sampling to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-based acceptance unless otherwise specified, and attributes must be verified at levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling is mandatory, with no hazardous substances like mercury allowed, and no Item Unique Identification required per DFARS 252.211-7003(c)(1)(i). Technical data associated with the item is subject to ITAR or EAR export controls, requiring prior governmental authorization for any disclosure to foreign persons, and contractors must hold a valid US/Canada Joint Certification Program certification, complete required DLA training, and be approved by DLA to access controlled data. The contractor must maintain ISO 9001:2015 certification and comply with CMMC Level 2 requirements, including self-assessment or third-party validation. Inspection and acceptance occur at the origin, and payment must be submitted electronically via WAWF using approved document types. All proposals must be submitted through DIBBS by August 13, 2026, and the contract is subject to FAR and DFARS clauses related to cybersecurity, trafficking in persons, employment verification, hazardous materials, and prohibition of covered defense telecommunications equipment. The contracting officer will determine the contract type at award and the evaluation is likely based on lowest price technically acceptable criteria with preference for HUBZone small businesses.

General Info

Procure three Datum Box Assemblies by 128 days, comply with DLA, MIL-STD, ITAR, and CMMC Level 2, Delivered in San Diego.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-13CS DLA Aviation Automated Simplified Acquisition

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 5

Solicitation

Response DeadlineAug 13

Deadline has passed

Submission Closed

08/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

Shenika Thompson

contact@example.gov

+1 (555) 000-0000

Full Description

DATUM BOX ASSY
DATUM BOX ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
SPE4A6-26-T-13CS
SECTION B
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6350-00-932-5548 Quantity: 3 EA Purchase Request: 7017272404QTY: 3 Delivery: 128 days ADO