This Solicitation opportunity from Connecticut was posted on June 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Day Hill Standpipe Electrical and Site Improvements

Closed

2025B-45State & Local

Submission Closed07/10/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237130

New

RFP ANM-1406-00 BNACTS: Stockton RTR UIS Facility/Tower Replacement in Stockton, CA

Solicitation # rfp-anm-1406-00-bnacts-stockton-rtr-uis-facilitytower-replacement-stockton-ca

This solicitation, identified as RFP ANM-1406-00 BNACTS, involves the full replacement of the RTR facility located in Stockton, California. The project scope includes the demolition of six existing communication antenna towers, the shelter, and all associated infrastructure, followed by the construction of four new antenna towers, a prefabricated shelter, and related infrastructure. The estimated magnitude of construction for this project is between 1,000,000 and 5,000,000 dollars. The opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB firms, under NAICS code 237130. Interested parties must submit their responses by September 28, 2026. Coordination for this project is managed by Anna Ma of Parsons, who serves as the primary point of contact for the solicitation.

PTSI Managed Services, Inc.

POSTED

DEADLINE

AMC-0962-00 BNACTS: LNQ RCAG Facility Repair/ Re-enforcement in Boothville, LA

Solicitation # amc-0962-00-bnacts-lnq-rcag-facility-repair-re-enforcement-boothville-la

This solicitation is for the construction, repair, and reinforcement of a Remote Communications Air to Ground facility located in Boothville, Louisiana. The project has an estimated magnitude of construction between 1,000,000 and 5,000,000 dollars. It is managed by PTSI Managed Services, Inc., with Jasmin Snype serving as the primary point of contact for interested firms. The contract is open to various small business set-asides, including SDB, WOSB, HUBZone, and veteran-owned businesses. Applicable NAICS codes include 237130 for power and communication line structures, 238110 for poured concrete foundations, and 238210 for electrical contractors. The response deadline for this opportunity is October 3, 2026.

PTSI Managed Services, Inc.

POSTED

DEADLINE

AMC-1083-00: GNI RCAG Facility Repair/ Re-enforcement in Galliano, LA.

Solicitation # amc-1083-00-gni-rcag-facility-repair-re-enforcement-galliano-la

This solicitation, identified as AMC-1083-00, involves the construction, repair, and reinforcement of a Remote Communications Air to Ground facility located in Galliano, Louisiana. The project is estimated to have a magnitude of construction between 1,000,000 and 5,000,000 dollars. It is managed by PTSI Managed Services, Inc., with Kelsey Skarin serving as the primary point of contact for interested firms. The opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB entities. Applicable NAICS codes for the project include 237130 for power and communication line structures, 238110 for poured concrete foundations, and 238210 for electrical wiring installation. The response deadline for this solicitation is October 3, 2026.

PTSI Managed Services, Inc.

POSTED

DEADLINE

Kittrell Job Corps Center-12 Strand Fiber Optic Replacement- Bldg 2, Bldg 3, Bldg 4

Solicitation # kittrell-job-corps-center-12-strand-fiber-optic-replacement-bldg-2-bldg-3-bldg-4

Covenant Learning Solutions, operator of the Kittrell Job Corps Center in North Carolina, is soliciting sealed bids for the replacement of 12-strand aerial fiber optic cables and associated connectors between Buildings 2, 3, and 4. The contractor is responsible for providing all labor, materials, equipment, and supervision to install outdoor-rated fiber optic cable along existing aerial pathways and terminate them into existing network switches. A critical requirement of this project is that the existing network service must remain fully operational without interruption until the owner authorizes the final switch-over. The contractor must also provide a construction timeline for approval during a pre-construction meeting and adhere to standard work hours of 8:00 AM to 3:00 PM, Monday through Friday. The project requires strict adherence to industry standards, local codes, and manufacturer specifications regarding cable support and bend radius. Acceptance is contingent upon successful Optical Loss Testing, OTDR testing, continuity testing, and polarity verification, as well as the submission of a complete closeout package with as-built documentation. Bidders must hold a valid North Carolina General Contractor license and maintain all necessary Builder's Risk and Liability insurance. Proposals must be submitted via email to Rachelle Judkins by September 30, 2026, and must include a completed Mandatory Bid Document. Payment will be issued as a single lump sum upon project completion, provided all required purchasing documentation is submitted.

Covenant Learning Solutions operator of Kittrell Job Corps Center

POSTED

DEADLINE

RFP ANM-1396-00 BNATCS: Burlington (QLN) UIS Facility and Tower Replacement in Burlington, OR

Solicitation # rfp-anm-1396-00-bnatcs-burlington-qln-uis-facility-tower-replacement-burlington-or

This solicitation involves the replacement of the UIS facility and towers at the FAA Burlington, Oregon site. The scope of work includes the demolition of two 60-foot RTR steel communication towers and a 1,254-square-foot equipment building along with associated infrastructure. In their place, the contractor will construct two new 60-foot self-supporting RTR communication antenna towers and a new 12-foot by 36-foot equipment building, including all necessary conduits, handholes, junction boxes, and communication cables. The project has an estimated construction magnitude between 1 million and 5 million dollars and is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned businesses. The primary NAICS code is 237130, though several other codes apply. Interested firms must respond by September 21, 2026, and should direct inquiries to Anna Ma at Parsons.

PTSI Managed Services, Inc.

POSTED

DEADLINE

CJAG Underground Utilities Construction

Solicitation # W9136426QA076

W7NU Uspfo Activity Oh Arng

POSTED

DEADLINE

Site Plan Review #2026-04 - AT&T Mobility Unmanned Telecommunications FacilitySite Plan Review 2026-04 involves the development of an unmanned telecommunications facility for AT&T Mobility located at 1301 W. Pacheco Boulevard in Los Banos, California. The project is situated within the Highway Commercial Zoning District on a 400 square foot leased portion of private property. The scope of work includes the installation of one 50 foot tall disguised monopole and various ground equipment that will be enclosed by a perimeter. The City of Los Banos has issued a Notice of Exemption for this project, determining it is exempt from CEQA requirements under Section 15303 for the new construction or conversion of small structures. This determination follows an evaluation of environmental resources, cumulative impacts, and historical resources per CEQA Guidelines Section 15300.2. Project coordination is managed by Justin Ragunton, Assistant Planner for the City of Los Banos, and Jared Kearsley, Project Manager.

POSTED

DEADLINE

Underground (UG) FOC Installation

POSTED

DEADLINE

Solicitation # IFB 16

Shrewsbury Electric and Cable Operations (SELCO) is soliciting bids for the Fiber to the Premises (FTTP) Network Upgrade Phase 4 in Shrewsbury, Massachusetts. The project involves the installation of approximately 15 miles of single-mode aerial and underground fiber optic cable, including signal transmission and distribution laterals from the existing backbone ring to splitter cabinets and public right-of-way access points. The scope of work encompasses cable installation, splicing, and bi-directional testing, with specific technical requirements for fiber characterization and the use of FieldSmart Fiber Scalability Center equipment. The contract will be awarded to the lowest responsible and eligible bidder, with bids due by September 29, 2026. The project is governed by Massachusetts General Laws, requiring compliance with prevailing wage rates, anti-discrimination statutes, and debarment certifications. Bidders must provide a 5% bid deposit and the selected contractor must furnish a payment bond for 100% of the contract price. Performance is tied to a strict baseline schedule, with full completion, including final deliverables and punch list items, required within 30 weeks of mobilization. SELCO will retain 25% of the total contract value until a final audit and verification of all as-built documentation and testing results are completed. All work must adhere to OSHA safety regulations and local Shrewsbury noise and hour ordinances.

POSTED

DEADLINE

PROJECT L 617 TRANSMISSION LINE REBUILD

Solicitation # 27-24

Burns and McDonnell is seeking qualified subcontractors for the Norwich Public Utilities L-617 C403 Transmission Line Rebuild project in Connecticut. The scope of work encompasses clearing, access, foundation, and structure installation. This solicitation, identified by number 27-24, requires interested bidders to first execute a nondisclosure agreement before the full RFP package will be released to protect confidential project information. The response deadline for this opportunity is September 24, 2026. Interested parties should coordinate with the primary contact, Karl Klein, or utilize the Connecticut DAS Procurement portal to initiate the NDA process and gain access to the bidding documents.

POSTED

DEADLINE

Tower Antenna Installation and Alignment Services

POSTED

DEADLINE

Microgrid - United States Army Garrison (USAG) Ansbach; Bavaria, Germany – Katterbach Kaserne

Solicitation # W912QR26ANSBACH

The US Government is conducting a market survey for a Design/Bid/Build project at Katterbach Kaserne, USAG Ansbach in Bavaria, Germany. The project involves the construction of a fully functional, islandable, and black start capable microgrid featuring solar photovoltaic power production, diesel fuel generators, a battery energy storage system (BESS), and a microgrid controller. This system is designed to provide resilient power to government facilities and offset energy from the local utility. The estimated contract value ranges from 25 million to 100 million dollars with a projected duration of 743 calendar days under NAICS code 237130. Interested firms, including various small business designations, must respond via the specified survey form by October 9, 2026. Submissions must include company size status, UEI and CAGE codes, bonding limits, and detailed past performance on similar microgrid projects, demonstrating the ability to self-perform at least 15 percent of the construction.

W072 Endist Louisville

POSTED

1 day ago

DEADLINE

in 28 days

AI Contract Overview

The contract involves comprehensive electrical and control system upgrades at the MDC’s Day Hill Standpipe site. The scope includes all necessary labor, equipment, fees, permits, and associated costs to complete the installation of a new electrical service, conduits, and control equipment. Additionally, the project requires the installation of a standby generator system, construction of an electrical/controls shed, and various site improvements such as clearing and grubbing, planting installations, fence removal, and new fence installation. The work aligns closely with the specifications detailed in the contract drawings, focusing primarily on electrical, control, and related site development efforts. This solicitation, identified as 2025B-45 and issued by the Connecticut DAS Procurement office, was posted on June 10, 2026, with a response deadline of July 10, 2026. The contract is designated for a State and Local Government Entity (SLED) and the point of contact for inquiries is Dana Chalupka, who can be reached via email or phone. The project is located within Connecticut and aims to deliver critical infrastructure improvements to enhance operational reliability and site functionality at the Day Hill Standpipe facility.

General Info

Electrical and control upgrades, standby generator, shed, site improvements at Day Hill Standpipe, Connecticut.

Agency

Connecticut → DAS ProcurementView Agency

NAICS

237130 - Power and Communication Line and Related Structures ConstructionView NAICS

Place of Performance

CT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedJun 10

Solicitation

Amendment 1Jun 10

Contract was updated

Response DeadlineJul 10

Deadline has passed

Submission Closed

07/10/2026, 01:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyConnecticut → DAS Procurement

Contacts1 person available

OfficeCT, USA

Organization / Agency

Connecticut → DAS Procurement

View Agency Profile

Office AddressCT, USA

Contacts

Dana ChalupkaPrimary Contact

contact@example.gov

+1 (555) 000-0000

Full Description

The Work shall consist of all labor, equipment, fees, permits, and other related costs necessary for electrical and control improvements at MDC’s Day Hill Standpipe. The work includes, but is not limited, to the following: acquisition of a new electrical service, installation of electrical and control conduits, furnishing of electrical and control equipment, installation of a standby generator system, construction of an electrical/controls shed, and various related site improvements including clearing and grubbing, installation of plantings and fence demolition and new fence installation. The scope of work strictly encompasses the electrical, control and various site work as noted in the Contract Drawings.