This Solicitation opportunity from Department Of Defense was posted on May 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DEPTH PERCEPTION AP

Closed

SPE2DS-26-T-058SFederal

Submission Closed05/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

Federal

Hull, Structural & Tank Preservation

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Outboard Motor and Control Systems

Ofc Of Acqusition Grants-National

POSTED

DEADLINE

USS San Diego (LPD-22), Refrigerant Suction Pipe for No.4 A/C Plant; remove and install

Solicitation # N6264926Q0577

Solicitation N6264926Q0577, issued by Navsup Flt Logistics Ctr Yokosuka, is a firm fixed price request for the removal and installation of an 8-inch IPS refrigerant suction pipe for the No.4 A/C Plant aboard the USS San Diego (LPD-22). The scope of work involves removing a pipe with a pinhole leak, picking up a repaired replacement from the SRF Production Shop S56, installing it in Auxiliary Machinery Room No.2, and conducting an operating pressure test. Performance is scheduled to take place at Sasebo Naval Base from November 23, 2026, to January 31, 2027. To be eligible for this single award, offerors must possess an active U.S. Navy Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) in the Japan Region and demonstrate authorization to operate in Japan per DFARS 252.225-7042. Award will be based on the lowest total price among responsive offerors, as technical acceptability is pre-qualified through the MSRA/ABR status. Quotations, including an SF 18 and a detailed price breakdown, are due by October 15, 2026. The contract requires compliance with higher-level quality standards under FAR 52.246-11 and utilizes the Wide Area WorkFlow system for invoicing.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Solicitation # W912EK26QA058

The US Army Corps of Engineers, specifically the Rock Island District, is soliciting bids under solicitation W912EK26QA058 for the procurement of new Flexifloat modular barge sections and associated equipment. This firm-fixed-price commercial supply contract aims to establish a stable marine work platform to support Mississippi Valley Division missions. The required equipment includes brand name or equal modular barge sections, connection hardware, deck cleats, lock assemblies, and rub rail brackets, with additional optional spud-related items. The procurement is designated as a total small business set-aside under NAICS code 336611. The solicitation was posted on September 8, 2026, with a response deadline of September 21, 2026. Performance of the contract will take place in Pleasant Valley, Iowa. The government has provided justification for the brand-name requirement based on engineering compatibility, safety considerations, and the need to avoid substantial duplication of costs. Interested parties must adhere to the technical specifications and submission instructions provided by the primary point of contact, Kate Behrens, and secondary contact, Jeffrey Voss.

W07V Endist Rock Island

POSTED

DEADLINE

USS BLUE RIDGE (LCC-19) TGI 3819P24302-A01, Yokosuka Japan

Solicitation # N6264926RA037

NAVSUP Fleet Logistics Center Yokosuka is soliciting firm-fixed-price repair and alteration services for the USS BLUE RIDGE (LCC-19) under a Master Agreement for Repair and Alteration of Vessels (MARAV). The scope of work, detailed in Task Group Instruction TGI 3819P24302-A01, includes specific maintenance items such as the installation of a new propeller sleeve and stern tube shaft, with provisions allowing for the off-site transport of the propulsion shaft for depot overhaul. The period of performance is scheduled from February 23, 2027, through June 8, 2027, with work performed aboard the vessel at the contractor's facility at Commander, Fleet Activities Yokosuka Naval Base. To be eligible for award, offerors must be authorized to operate and do business in Japan and must hold an active U.S. Navy Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) as a prime contractor. Proposals are due by October 5, 2026, at 10:00 AM JST and must be submitted electronically. Award will be granted to the responsible, technically acceptable offeror providing the lowest evaluated price, with price playing a dominant role in the selection process. The contract incorporates strict quality management standards per NAVSEA Standard Item 009-04 and requires the use of the Wide Area WorkFlow system for invoicing and payment.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

COLUMBIA Class Tailcone Manufacture

Solicitation # N0016726R1005

The Advanced Propulsor Management Office at the Naval Surface Warfare Center, Carderock Division is issuing a pre-solicitation notice for the Columbia Class Tailcone Follow-on contract, soliciting feedback on draft Statement of Work and solicitation sections L and M to inform the upcoming RFP release scheduled for late September 2026. This notice is not an invitation to bid and no compensation will be provided for response preparation; responses must be submitted by June 2, 2026, and are limited to ten pages, focusing on demonstrating technical capability and identifying any barriers to proposal submission. The intended award date is June 2027, with a contract structure combining a base year and four one-year options, potentially extending performance over five years. The core deliverable is the manufacturing of the Columbia Class submarine tailcone, requiring advanced capabilities in machining, composite and syntactic foam fabrication, dynamic balancing, and secure inter-facility transport, aligned with stringent quality standards including ISO 9001:2008 or AS9100. The resulting contract will be a mixed-type award with Fixed-Price-Incentive-Fee (FPIF) clauses for tailcone kits and Cost-Plus-Fixed-Fee (CPFF) terms for engineering services and non-recurring engineering, evaluated through a trade-off process prioritizing technical merit over cost. Proposals must be submitted in four distinct volumes via the PIEE portal, with strict formatting and naming conventions, and compliance with mandatory certifications including Unique Entity ID, CAGE code, Small Business Participation Commitment goals (SDB, HUBZone, WOSB, VOSB, SDVOSB), and affirmative statements regarding no organizational conflict of interest. Security requirements are paramount, mandating compliance with DD Form 254, DoD 5220.22-M for classified data, and DFARS 254.204-7012 for unclassified controlled information, with facility clearance either already held or a detailed path to acquisition required. Data deliverables will be tracked through multiple CDRLs covering production schedules, monthly progress, conference minutes, travel reports, and cost status, while packaging and marking adhere to NAVSEA Form 9245/1 and specific PERs. All submissions are final and no government responses or notifications will be provided regarding pre-solicitation feedback.

POSTED

DEADLINE

Aviation Availability: USCGC RELIANCE FY27 AA

Solicitation # 70Z08026QMECP0032

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

USS MIGUEL KEITH (ESB-5) ROH FY27

Solicitation # N6264926

The NAVSUP Fleet Logistics Center Yokosuka Site Singapore is issuing a presolicitation notice for a competitive Regular Overhaul (ROH) and Underwater Inspection in Lieu of Drydocking (UWILD) for the USS MIGUEL KEITH (ESB-5). Tentatively scheduled for the end of 2027, the ship repair availability will be performed by a contractor shipyard located within the Seventh Fleet Area of Responsibility. The comprehensive scope of work includes hull and structural preservation, propulsion and auxiliary machinery maintenance, electrical and HVAC services, communication and navigation system updates, and safety equipment certifications. Specific technical requirements include ABS intermediate surveys, high voltage electrical safety standards, and the delivery of gas free certificates and weight and moment reports. To be eligible for award, interested ship repair firms must maintain an active registration in the System for Awards Management (SAM.gov) and be authorized to operate in the country of performance. The government is requesting capability statements from interested firms, which must be submitted on company letterhead and include a description of the firm's capabilities, relevant experience with U.S. Navy ships, contract history, and staffing levels. These submissions, limited to five pages, must be emailed to the designated Contract Specialist by September 26, 2026. This notice is for informational purposes only and does not constitute a solicitation or a binding commitment by the U.S. Government to award a contract.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

3553 CEMDC CELRE Procurement of Stoplog Barges - W912BU26BA034

Solicitation # W912BU26BA034

Solicitation W912BU26BA034 is an Invitation for Bid for the design, fabrication, testing, and delivery of two new welded steel stop log barges, with an option for a third. These vessels are intended for the Poe and MacArthur Locks on the Great Lakes to support the Detroit District's St. Mary's River Project. Hull 916 will be configured for Poe Lock stop logs, and Hull 925 will be configured for MacArthur Lock stop logs. The project is a total small business set-aside under NAICS code 336611, utilizing a firm fixed-price contract structure. The contractor must deliver the vessels afloat and ready for service to Sault Saint Marie, Michigan, within 625 calendar days of the award. The procurement requires bid, payment, and performance bonding, with the performance bond set at 20 percent of the original contract price. Liquidated damages for delivery delays are established at 1,569.67 dollars per calendar day. Construction must adhere to ABS Class standards, USACE safety manuals, and specific AWS and ABS welding specifications. The acquisition process is managed by the Marine Design Center and the Philadelphia Contracting Branch. Bids must be submitted electronically via the Procurement Integrated Enterprise Environment by September 25, 2026, at 2:00 PM EDT. Award will be based on price, with the government evaluating the total price for the basic requirement and all options. The contract includes a phased execution approach covering planning, construction, and delivery, with final inspection and acceptance occurring at the Detroit District location.

W2SD Endist Philadelphia

POSTED

DEADLINE

Dock-Side (DS): CGC ACTIVE AA FY27

Solicitation # 70Z08026QMECP0030

Solicitation 70Z08026QMECP0030 is a firm fixed-price request for quotations for the USCGC ACTIVE (WMEC 618) FY2027 aviation availability. The contract is 100% set aside for small business HUBZone concerns and is managed by the SFLC Procurement Branch 1 of the Department of Homeland Security. The period of performance is scheduled from May 5, 2027, to June 3, 2027, with work performed in Port Angeles, Washington. The scope of work focuses on critical aviation maintenance and preservation, including load testing of 28 Volt DC and 400 Hz power supplies, calibration of aviation fuel flow meters, cleaning and inspection of aviation fuel service tanks, and the preservation of helicopter operating areas. Additional requirements include the repair of flight deck surface and edge lights, talon grid testing, and the renewal of counter measure washdown nozzles. The government will utilize a best value tradeoff process for the award, where technical capability, experience, and past performance are significantly more important than price. Evaluation focuses on the contractor's history with DoD and USCG surface vessels and their workforce capacity. Contractors must adhere to strict quality and safety standards, including NAVSEA Standard Item 009-32 for flight deck certification and SFLC Std Spec 6310 for ship structure preservation. Payment is based on a percentage or stage of completion via the Invoice Processing Platform, with a 10 percent withholding until all deliverables are accepted. The solicitation requires a comprehensive submission consisting of separate volumes for technical capability, experience, past performance, and a detailed price schedule.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Standby Emergency Diesel Generator (SEDG); provide

Solicitation # N6264926Q0485

Solicitation N6264926Q0485 is a request for a Firm-Fixed-Price job order to provide and maintain a temporary pierside Standby Emergency Diesel Generator (SEDG) for the USS NEW ORLEANS (LPD-18) in Sasebo, Japan. The required equipment is a 1,000 kW (1,250 kVA), 440 VAC, 60 Hz, 3-Phase generator. The period of performance is scheduled from October 22, 2026, to January 30, 2027, with an estimated total request value between 5 million and 10 million dollars. A key technical update in revision A02 of the statement of work changes the material source for temporary power cables from Contractor Furnished Material to Government Furnished Material. Eligibility for award is strictly limited to offerors who can demonstrate authorization to do business in Japan per DFARS 252.225-7042 and who possess an active U.S. Navy Master Agreement for Repair and Alteration of Vessels (MSRA/ABR) in the Japan Region. The government intends to make a single award based on the lowest total priced proposal from a responsive and responsible offeror. Proposals must be submitted in Japanese Yen and include a signed SF18 or SF33 along with the required MSRA/ABR certifications. Following Amendment 0001, the response deadline has been extended to September 14, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

20--ACCUMULATOR,HYDRAUL

Solicitation # N0010425RYK73

This firm-fixed-price contract, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a small business set-aside for the manufacture and procurement of hydraulic accumulators (NSN 7HH 2090 016053873). The procurement is a rated order certified for national defense use and requires compliance with the Defense Priorities and Allocations System. The total quantity was increased from 7 to 18 units via amendment, and the final award is structured as a contract rather than a purchase order. The period of performance is 180 days from the date of the order, with accelerated, early, and incremental deliveries encouraged. Technical compliance is based on the design represented by Cage Code 53711 and Technical Data Package version 004. Quality assurance requires adherence to ISO 9001 standards, and all items must be mercury-free. Physical identification and marking must follow MIL-STD-129, and configuration control is governed by MIL-STD-973. A critical requirement is that DCMA must provide inspection and acceptance of all units at the origin prior to shipment to avoid payment delays. Packaging must comply with MIL-STD-2073-1 for stock and OCONUS shipments, while CONUS shipments may use ASTM D3951. The award is based on the lowest priced, technically acceptable (LPTA) offer, with a 10 percent evaluation preference applied to HUBZone small businesses. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system. The solicitation underwent multiple amendments to extend the closing date, with the final updated deadline for quotes set for September 11, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract is for the procurement of four units of a Depth Perception Apparatus, specifically the Randot test device used for ophthalmic screening to detect vision disorders such as amblyopia, suppression, and strabismus in patients of all ages. The device operates by presenting six geometric shapes embedded in random dot backgrounds, requiring viewers to wear specialized glasses to perceive the images, thereby preventing guesswork and ensuring accurate assessment. Each unit includes two test levels: 500 and 250 seconds of arc, with an additional graded circle range extending from 400 to 20 seconds of arc and an animal test range from 400 to 100 seconds of arc. The item is identified by NSN 6540-01-486-2485 and is procured under solicitation SPE2DS-26-T-058S with a total contract value of $800.00 at $200.00 per unit. Delivery is required within 20 days after award to Fort Bliss, Texas, under FOB Destination terms, with inspection and acceptance occurring at the point of delivery by the government. Packaging and marking must strictly adhere to Medical Marking Standard No. 1 (MMS No. 1), which replaces all references to MIL-STD-129 for medical acquisitions, and packaging must comply with MIL-STD-2073-1E, using commercial-grade sealed unit containers and exterior shipping containers suitable for safe transport by common carriers at the lowest cost. Hazardous materials, if present, must be labeled per OSHA’s Hazard Communication Standard, and any radioactive content must be explicitly declared and marked in accordance with MIL-STD-129. The contract includes mandatory clauses covering employment equity, trafficking in persons, cybersecurity protections including NIST SP 800-171 and safeguarding defense information, prohibitions on certain confidentiality agreements, and compliance with the System for Award Management. Offerors must provide a valid UEI and CAGE code, disclose socioeconomic status including small business, HUBZone, and veteran-owned certifications, and comply with restrictions on foreign-flag vessel use for ocean shipments. Invoicing must be processed through WAWF, and the contract permits alternative contract types under deviation 2026-00038, though the final type remains unspecified pending award. Technical compliance with the DLA Master List of Technical and Quality Requirements is required

General Info

Procurement of four Depth Perception Apparatus units for vision testing, delivery to Fort Bliss.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

Contract Value

$800

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

EAST BIGGS AIRFIELD, FORT BLISS, TX, 79918-8006, USA

Set-Aside

NONE

Awardee

STEREO OPTICAL COMPANY, INCView Profile

Award Issued Date

05/20/2026, 12:00:00 AM UTC

Documents

(1)

RFQ SPE2DS-26-T-058S Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 10

Solicitation

Response DeadlineMay 18

Deadline has passed

Submission Closed

05/18/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressUSA

Contacts

Seth Tootell

contact@example.gov

+1 (555) 000-0000

Full Description

DEPTH PERCEPTION AP
DEPTH PERCEPTION APPARATUS, OPHTHALMIC
DEPTH PERCEPTION APPARATUS OPHTHALMIC RANDOM
DOT TEST W/2 LEVELS;UTESTS THE ABILITY TO IDENTIFY
SIX GEOMETRIC FORMS FROM RANDOM DOT BACKGROUNDS;
FIGURES CANNOT BE IDENTIFIED WITHOUT GLASSES TO DISCOURAGE
GUESSING; EFFECTIVE AND EASY TO USE FORM OF SCREENING
VISION FOR ALL AGES;HELPS IDENTIFY PROBLEMS SUCH AS AMBLYOPIA,
SUPPRESSION AND STRABISMUS THAT CAN IMPEDE A CHILD'S
DEVELOPMENT AND PERFORMANCE; RANDOT TEST INCLUDES 2
LEVELS: 500 AND 250 SECONDS OF ARC; GRADED CIRCLE INCLUDES 400 TO 20
SECONDS OF ARC; ANIMAL TEST: 400 TO 100 SECONDS OF ARC
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: EACH (EA)
.
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
SPE2DS-26-T-058S
SECTION B
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6540-01-486-2485 Quantity: 4 EA Purchase Request: 7016683838QTY: 4 Delivery: 20 days ADO