Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DESKTOP LATHE AND MILL

Active
SPMYM226Q7799Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, numbered SPMYM26Q7799, seeks quoted bids for a DESKTOP LATHE AND MILL from contractors responding to the U.S. Department of Defense through DLA Maritime - Puget Sound. All solicitation details and amendments will be posted exclusively on SAM.gov, and electronic quote submissions are required through the same platform. Bids must be submitted via email to diana.baldwin@dla.mil by Wednesday, August 5, 2026, at 10 a.m. PST, and must include a fully completed and signed solicitation form to be deemed responsive. The contract requires quotes to be furnished FOB Destination Silverdale, WA, with clear lead times or delivery dates provided. Contractors must supply complete information including their CAGE code, point of contact, manufacturer details, country of origin, and compliance with applicable FAR clauses such as 52.204-24 and 52.212-3. Contractors subject to NIST SP 800-171 cybersecurity requirements must have a current assessment on file, no more than three years old, unless otherwise specified. However, items classified as Commercial Off The Shelf (COTS) are exempt from this requirement, and bidders must explicitly identify and provide documentation for any COTS items during submission. All mandatory fields must be completed on the solicitation form, including Section K for manufacturer data and Section F for delivery timelines. Failure to sign boxes 30a, 30b, and 30c on page one, or to accurately complete any designated section, will render the bid non-responsive. The deadline for response is August 6, 2026, at 5 a.m. PST, and the NAICS code for this procurement is 333517, indicating the procurement falls under precision instrument and equipment manufacturing.

General Info

Submit desktop lathe and mill quote via SAM.gov by August 5, 2026, FOB Silverdale, WA, with CAGE, COTS, and signed form.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

Silverdale, WA, 98315, USA

Set-Aside

NONE

Documents

(9)

SALIENT+CHARACTERISTICS+DOCUMENTS.pdf

PDF

SPECIFICATIONS+DOCUMENTS.pdf

PDF

SITE+SPECIFIC+REQUIREMENTS.pdf

PDF

Amendment+SPMYM226Q7799+SF+30.pdf

PDF

EXHIBITS+D_E+and+F.pdf

PDF

SOLE+SOURCE+DOCUMENTS.pdf

PDF

EXHIBITS+A_B+and+C.pdf

PDF

Solicitation+Amendment+-+SPMYM226Q77990001.pdf

PDF

Solicitation+-+SPMYM226Q7799.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / Agency
Department Of Defense → DLA Maritime - Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5000, USA
Contacts
Diana Baldwin
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV


ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.


THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV


ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.


To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)


**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement.  Must identify and provide information to contracting officer on bid during solicitation period**


  Please read the contract in its entirety.


  If you are able to provide a quote be sure to provide the following information in the sections provided below:


  1. Page 1 BLK 17a. Provide Contractor's info and cage code.
  2. Section A. A1 – 1. Enter The Contractor's POC
  3. Section B. – Enter your Quote and any other info we should know.
  4. Please quote FOB Destination SILVERDALE, WA.
  5. Section F. –  Provide the Lead Time and/or Delivery Date.
  6. Section K. K21 – Check the appropriate box and provide the Manufacturer’s Name, Address and the Country of Manufacturing
  7. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes
  8. Section K.- 52.212-3(b)-(p) Check the applicable boxes
  9. Page 1 -  Read box 28 and sign boxes 30 a, b, and c.
  10. Return the signed and filled out solicitation with your quote by WEDNESDAY, AUGUST 05, 2026 10am PST. 

FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.


EMAIL:  diana.baldwin@dla.mil

Similar Contracts

Same NAICS industry code

NAICS: 333517
New
Federal
Tools
Solicitation # W911S226U3903
The contract solicitation titled Tools under solicitation number W911S226U3903 is a combined solicitation issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside with full set-aside status, meaning only small businesses as defined by the Small Business Administration are eligible to compete. The North American Industry Classification System code 333517 corresponds to the manufacturing of industrial machinery, indicating the requirement is for tools likely used in industrial or military maintenance and repair operations. Responses are due by August 12, 2026, at 4:55 AM Eastern Time, with the solicitation posted on August 3, 2026. The primary point of contact is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 703-614-0476. The place of performance is listed with a zip code of 22211, suggesting delivery or service may be required primarily in the Arlington, Virginia area, despite the issuing office being based in New York. All interested parties must review the full listing of required tools provided in the attachment to ensure compliance with technical specifications.
W6QM Micc-Ft Drum

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333517
New
Federal
WATERJET MACHINING CENTER (SOLE SOURCE)
Solicitation # SPMYM226Q7742
The solicitation for a WATERJET MACHINING CENTER is a sole source opportunity issued by DLA Maritime - Puget Sound under solicitation number SPMYM26Q7742, with a posting date of August 3, 2026, and a firm response deadline of August 7, 2026, at 5:00 PM Eastern Time. Bids must be submitted via email to TRICIA.WINTERSTEEN@DLA.MIL and must include a completed and signed solicitation, manufacturer information, country of origin, and lead time for delivery quoted FOB destination. Items classified as Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 compliance requirements, but bidders must clearly identify and provide supporting documentation to the contracting officer during the solicitation period. For non-COTS items, contractors must have a current, valid assessment under DFARS 252.204-7019, not older than three years, unless a shorter period is specified. The place of performance is in Silverdale, Washington, with the contracting office located in Bremerton, WA. This procurement does not utilize any set-aside provisions and falls under NAICS code 333517. All details and amendments will be publicly accessible via the SAM.gov website.
DLA Maritime - Puget Sound

POSTED

about 12 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333517
New
Federal
Fiber Laser Etching System Supply and InstallationA fiber laser etching system is being procured under a subcontract set aside for the SBA Certified Women-Owned Small Business Program, requiring full supply, delivery, installation, and commissioning of a system that meets or exceeds the Paragon P155GA009-SD specifications. The system must include integrated CNC capabilities and be fully compatible with the existing facility chillers to ensure seamless operational integration. The solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026, and the place of performance is located at a site with zip code 67221. The North American Industry Classification System code for this procurement is 333517, aligning with specialty industrial machinery manufacturing, and the contracting activity is under the Department of Defense, specifically the FA4621 22 Cons Pk organization.
FA4621 22 Cons Pk

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 333517
New
Federal
Supply and Delivery of TRAK DPMRX5 Bed Mill with ProtoTRAK RMX CNCThe contract requires the procurement, configuration, and delivery of one TRAK DPMRX5 Bed Mill equipped with the ProtoTRAK RMX CNC control system, including all necessary software and tooling accessories to ensure full operational capability. The equipment must be fully compliant with federal marking and reporting standards, ensuring traceability and adherence to defense procurement regulations. The system is intended for use at the Naval Surface Warfare Center Crane location in Indiana, with a delivery timeline aligned to the response deadline of August 10, 2026. The contract falls under the NAICS code 333517 for metalworking machinery manufacturing and is categorized as a subcontract under the Department of Defense, specifically managed by NSWC Crane. All deliverables must meet exacting military specifications and be ready for immediate integration into existing production or testing environments upon receipt.
Nswc Crane

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 333517
New
Federal
Industrial-Grade Laser System Supply – BOSS FM D DesktopThe contract involves the supply of a single BOSS FM D Desktop industrial laser system for use in the NISE FY26 CBRD Area Lab Revitalization Project at the Naval Surface Warfare Center Indian Head Division. This is a Small Business Set Aside solicitation under NAICS code 333517, meaning only eligible small businesses may bid, and the award is intended to support small business participation in federal contracts. The system will be delivered and installed at the facility located in Indian Head, Maryland, with a ZIP code of 20640, and is critical to enhancing laboratory capabilities for CBRD-related research and development. The solicitation was posted on July 31, 2026, and responses are due by August 17, 2026, with the procurement structured as a subcontract under the Department of Defense.
Nswc Indian Head Division

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 333517
New
Federal
BED MILL PACKAGE
Solicitation # N0016426Q0283
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking a sole source procurement for one TRAK DPMRX5 Bed Mill with ProtoTRAK RMX CNC Package under NAICS code 333517, issued as a firm fixed price commercial acquisition authorized under FAR 12. The contract is exclusively awarded to CHARLES JONES MACHINERY INC due to unique technical, physical, and operational requirements that only this vendor can fulfill without risking mission delays or excessive costs. The solicitation is open for quotations from 31 July 2026 through 10 August 2026 at 3:00 PM Eastern Time, with responses required to be emailed to danielle.n.richardson12.civ@us.navy.mil. All offerors must be currently registered in SAM, and while other firms may submit capability statements, the government retains full discretion to proceed without competition. Amendments to the solicitation will be posted on SAM.gov, and it is the vendor’s responsibility to monitor for updates. The point of contact for this procurement is Danielle Richardson, and performance will occur at Crane, Indiana.
Nswc Crane

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 333517
New
Federal
CNC Tube Bender
Solicitation # W50S9626QA021
The South Dakota Air National Guard’s 114th Maintenance Group is seeking a CNC Tube Bender through a combined synopsis and solicitation issued as a Request for Quote under solicitation number W50S9626QA021, classified under NAICS code 333517 with a small business set aside for businesses with fewer than 500 employees. The requirement is for a commercially available item, and all specifications are detailed in the RFQ documents, particularly on pages 3-4 for technical requirements and page 43 for instructions to offerors, with evaluation criteria outlined on page 47. The solicitation is open for quotations until August 12, 2026, at 10:00 PM Eastern Time, with responses due by that deadline. The contract is being managed by the Department of Defense through the W7N0 Uspfo Activity Sdang 114 office located in Sioux Falls, South Dakota, and the primary point of contact is Eric Comes, reachable via email or phone, with Jeremiah Minter as the secondary contact. All proposals must comply with the commercial items guidelines under R-FAR 12.102-1 and be submitted through the designated SAM.gov portal.
W7N0 Uspfo Activity Sdang 114

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333517
New
Federal
22 AMXS - Laser Etcher Sources Sought
Solicitation # F2Z2956201AW02
The 22d Contracting Squadron at McConnell Air Force Base is conducting market research to identify qualified vendors capable of supplying a single laser etcher equivalent to the P155GA009-SD model by Paragon. This sources sought notice is strictly for informational and planning purposes and does not constitute a solicitation, Request for Proposal, or any binding commitment from the Government. Respondents must ensure that any alternative product proposed meets or exceeds all salient characteristics of the specified model and must provide supporting technical documentation. The selected contractor, if a contract is later issued, will be responsible for all aspects of installation including site preparation, surface cleaning, debris removal, and ensuring no disruption to facility operations or security. No pricing information should be included in responses, and all costs associated with submitting information are borne solely by the respondent. Responses are voluntary and will not be compensated or returned. This effort is set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB Program, with NAICS code 333517. All submissions must be directed to the designated points of contact by the deadline of 7 August 2026 at 1:00 PM CDT, with the subject line “22 AMXS - Laser Etcher”. The Government will use responses solely to evaluate market capabilities and inform future acquisition strategies. No award will be made based on these submissions alone, and no contract will be issued as a result of this notice. Further procurement actions will follow only if a formal solicitation is issued at a later date.
FA4621 22 Cons Pk

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 333517
New
Federal
LASER CUTTER AND ENGRAVER
Solicitation # N00174-26-SIMACQ-W12-0004
The U.S. Navy’s NSWC Indian Head Division is soliciting quotes for a laser engraver and a laser cutter to support the NISE FY26 CBRD lab revitalization project, with a strict requirement for specific models based on validated research specifications. The procurement will be conducted under a Small Business Set Aside as a total set-aside using the Lowest Price Technically Acceptable evaluation method, meaning the award will go to the lowest-priced quotation that meets all technical requirements. All quotes must be all-inclusive, clearly stating the total cost and ensuring that any shipping expenses are fully accounted for within the quoted price, as failure to include shipping will render the quote non-compliant. Vendors must provide their CAGE code, contact information, phone number, and confirm their ability to use Wide Area Workflow for payment processing. Payment via PCARD is explicitly prohibited and will result in rejection of the offer. Quotes must be submitted by August 17, 2026, and remain valid for at least 30 days. The solicitation, assigned the number N00174-26-SIMACQ-W12-0004, is classified under NAICS code 333517 and is managed by the Department of Defense through the NSWC Indian Head Division office located in Indian Head, Maryland. Primary point of contact for inquiries is Christina E. Simpson, reachable by email or phone.
Nswc Indian Head Division

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 333517
New
Federal
Flow Waterjet Cutting System
Solicitation # N6893626SIMACQDB0000MEB0000M0569
The Naval Air Warfare Center, Weapons Division at China Lake, California, intends to award a sole source firm fixed price contract to Flow International Corporation for one unit of the Flow Mach 200c waterjet cutting system, which includes the proprietary Pivot+™ 5-axis waterjet head with taper control capabilities. This action is taken under FAR 6.103.1, and no competitive solicitation or request for quotes will be issued. Interested parties may submit a capability statement demonstrating their ability to meet the required performance standards for quality, accuracy, reliability, and schedule by August 4, 2026, referencing solicitation number N6893626SIMACQDB0000MEB0000M0569, to the designated point of contact. All respondents must be registered in SAM.gov with an active status prior to submission, and processing of registration information may require 10 to 15 days. Additionally, contractors must be certified through the Defense Logistics Information Services Joint Certification Program to access Controlled Unclassified Information, with access limited to a single Data Custodian per CAGE code identified on the DD Form 2345, approved by the Defense Logistics Agency. Failure to meet these certification and registration requirements will disqualify potential offerors from consideration.
Naval Air Warfare Center

POSTED

4 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 333517
New
Federal
UV Laser Engraver
Solicitation # W911S226U3833
The U.S. Army’s Office of W6QM Micc-Ft Drum is seeking proposals for a UV Laser Engraver under solicitation number W911S226U3833, with a combined solicitation type and a Small Business Set Aside designation for total small business participation. The opportunity is classified under NAICS code 333517, which pertains to industrial laser equipment manufacturing, and is open exclusively to small businesses as defined by the Small Business Administration. The solicitation was posted on July 30, 2026, and all responses must be submitted by 6:20 PM Eastern Time on August 6, 2026. The primary point of contact is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or phone at 520-693-6006, with the contracting office located at Fort Drum, New York, 13602-5220. While the official place of performance is listed with a zip code of 31905, specific location details for delivery or installation have not been provided. Interested parties must navigate the official SAM.gov portal using the provided link to access full documentation and submit proposals.
W6QM Micc-Ft Drum

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 333517
New
SLED
Coordinate Measuring Machine (CMM) Supply and Equipment IntegrationThe contract requires the procurement and delivery of a 7.10.7 Shop Floor CMM system from Hexagon or an equivalent manufacturer, ensuring the system meets specified performance and technical standards. The equipment must be fully integrated with designated hardware components and include environmental compensation features to maintain measurement accuracy under varying shop floor conditions. The system is intended for use in an educational manufacturing environment, supporting workforce development and technical training programs. The solicitation was posted on July 29, 2026, with a response deadline of August 13, 2026. It is classified as a subcontract under NAICS code 333517, which pertains to precision measurement and control instrument manufacturing. The contracting entity is Arizona’s Career & Technical Education /JTED (CTE) program, indicating the system will be deployed in an educational or vocational training setting to enhance technical education capabilities. The place of performance and point of contact details are not specified, and no set-aside provisions apply.
Career & Technical Education /JTED (CTE)

POSTED

5 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 333415
New
Federal
AIR CONDITIONER
Solicitation # SPMYM226Q7870
To be considered for award, bidders must submit a fully signed and completed solicitation via email to donna.todd@dla.mil by the deadline of August 4, 2026 at 7:00 PM ET; fax submissions are also accepted but electronic submission through SAM.gov is available and encouraged. The solicitation number is SPMYM26Q7870 for an air conditioner under a Small Business Set Aside, with NAICS code 333415, issued by the Department of Defense’s DLA Maritime – Puget Sound in Bremerton, Washington. Bidders must complete all items listed, including providing contractor information, CAGE code, point of contact, quote, FOB destination, lead time, delivery date, manufacturer details in Section K, and checking applicable boxes in clauses 52.204-24(d)(1) and (2), as well as 52.212-3(b)-(p). All responses must include signatures on boxes 30a, 30b, and 30c on page 1. Contractors required to comply with NIST SP 800-171 must have a current assessment dated within the last three years unless otherwise specified; however, items classified as Commercial Off The Shelf are exempt provided they are clearly identified to the contracting officer during submission. Failure to meet any of these requirements will render the bid nonresponsive.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in about 19 hours
View Details
NAICS: 334220
New
Federal
HANDHELD RADIOS
Solicitation # SPMYM226Q7865
This solicitation, numbered SPMYM26Q7865, is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside for handheld radios, issued by the Department of Defense’s DLA Maritime - Puget Sound office in Bremerton, Washington. All submissions must be made electronically through SAM.gov, and quotes must be submitted via email or fax to jack.edwards@dla.mil no later than August 5, 2026, at 4:00 PM ET. To be considered responsive, bidders must fully complete the solicitation packet including filling out Box 17A, reading and signing Boxes 30a, b, and c on page 1, providing their CAGE code, quoting FOB Destination Bremerton, WA, clearly stating the lead time, and identifying the manufacturer and country of origin for the products. Compliance with Clause 52.204-24(2)(d)(1) and (2) is mandatory, and bidders must ensure applicable boxes are checked. Any contractor awarded the contract must have a current NIST SP 800-171 assessment, not older than three years, unless the item is classified as Commercial Off-The-Shelf (COTS), in which case an exemption applies, but the COTS status must be explicitly declared and documented during the bidding process.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 1 day
View Details
NAICS: 325510
New
Federal
AMERCOAT THINNER
Solicitation # SPMYM226Q78370001
To be considered for award, bids for AMERCOAT THINNER under solicitation SPMYM26Q78370001 must be submitted via email to donna.todd@dla.mil as a fully signed and completed solicitation, with all required fields including Contractor information, CAGE code, POC details, quote, FOB Destination, lead time, delivery date, and manufacturer data in Section K. Bidders must properly check applicable boxes in clauses 52.204-24(d)(1) and (2), as well as 52.212-3(b)-(p), and affirm compliance by signing boxes 30a, b, and c on Page 1. All submissions must be received by the deadline of August 4, 2026 at 7:00 PM EST. The solicitation is a Small Business Set Aside under NAICS code 325510 and is managed by the Department of Defense’s DLA Maritime - Puget Sound office in Bremerton, Washington. Contractors subject to NIST SP 800-171 must maintain a current assessment no older than three years unless otherwise specified; however, items classified as Commercial Off The Shelf are exempt, provided they are clearly identified and documented during submission. All updates and amendments will be posted exclusively on SAM.gov, and electronic quoting is available through that platform. Failure to comply with any requirement will render the bid non-responsive.
Paint and Coating Manufacturing

POSTED

about 12 hours ago

DEADLINE

in about 19 hours
View Details
NAICS: 541611
New
Federal
Project Management and Coordination ServicesThis contract involves comprehensive end-to-end management of furniture supply, delivery, and installation services with full coordination required between the contractor and the government’s Contracting Officer’s Representative and Project Manager. The scope includes all logistical elements necessary to ensure timely and compliant delivery and setup of furniture at the designated facility in Bremerton, Washington, 98314, encompassing site access planning and security coordination. As a Small Business Set Aside under NAICS code 541611, the contract is reserved exclusively for small businesses, with a response deadline of August 6, 2026, and was posted on July 31, 2026. The performing agency is the Department of Defense through DLA Maritime - Puget Sound, and the task requires meticulous adherence to federal procurement standards and on-site operational protocols.
Administrative Management and General Management Consulting Services

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
Federal
Logistics and Delivery ServicesThe contract is for logistics and delivery services to transport furniture kits to the Puget Sound Naval Shipyard Receiving Officer located in Building 514 in Bremerton, Washington, with a zip code of 98314. All deliveries must be performed using vehicles equipped with lift gates to ensure proper handling and unloading of the furniture kits. The solicitation is classified as a subcontract under a Small Business Set Aside, meaning only small businesses are eligible to bid, and the North American Industry Classification System code is 484220, which pertains to specialized freight trucking. The opportunity was posted on July 31, 2026, and responses are due by 5:00 PM on August 6, 2026. The contracting activity is managed by DLA Maritime - Puget Sound under the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 238211
New
Federal
Electrical Integration for Powered FurnitureThe contract titled Electrical Integration for Powered Furniture seeks a small business subcontractor to install and certify electrical components within powered furniture systems, including adjustable height desks, powered panels, and wire management solutions. The work must comply with all applicable safety and performance standards to ensure reliable operation and long-term durability of the integrated systems. The scope requires precise technical execution, proper documentation, and certification of all electrical work to meet federal and industry specifications for defense-related environments. All components must be installed to allow seamless functionality while maintaining aesthetic and ergonomic integrity. This opportunity is designated as a Small Business Set Aside under NAICS code 238211 and is managed by DLA Maritime - Puget Sound under the Department of Defense. Proposals must be submitted by August 6, 2026, at 5:00 PM Eastern Time, with performance expected to occur at the facility in Bremerton, Washington, zip code 98314. The contract is structured as a subcontract, indicating it will support a primary contractor involved in larger defense or federal furniture procurement efforts. While no point of contact is listed, interested parties should utilize the provided SAM.gov link for additional details and submission requirements.

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 238213
New
Federal
Furniture Installation and On-Site AssemblyThe contract entails the on-site installation and assembly of modular office furniture systems, including panels, desks, workbenches, and storage units, specifically for Building 943 in Bremerton, Washington, with strict adherence to government-provided layouts. This is a subcontract classified as a Small Business Set Aside under the NAICS code 238213, reserved exclusively for small businesses, ensuring eligibility and compliance with SBA guidelines. The work must be completed at the designated location, and bidders are required to submit proposals by the deadline of August 6, 2026, at 5:00 p.m. The awarding agency is DLA Maritime - Puget Sound, operating under the Department of Defense, underscoring the federal nature of the project and the need for precise execution in a government facility.

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 337214
New
Federal
Office Furniture Supply and Kit AssemblyThe contract entails the manufacture, pre-assembly, and packaging of modular office furniture systems including cubicles, desks, storage units, and conference components, all constructed to exact government layout specifications. All work must adhere to precise design standards and require skilled fabrication and assembly processes to ensure uniformity, durability, and compliance with federal office environment requirements. The furniture systems are to be fully prepared for final installation at the designated location, with all components kit-packed and labeled for efficient on-site deployment. This is a Small Business Set Aside contract under NAICS code 337214, exclusively available to small businesses, and is managed by the Department of Defense through DLA Maritime - Puget Sound. The place of performance is specified as Bremerton, Washington, with a response deadline of August 6, 2026, at 5:00 PM. The contract is classified as a subcontract, indicating it is part of a broader procurement structure, and the full details can be accessed through the provided SAM.gov link for interested qualified vendors.
Office Furniture (except Wood) Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332112
New
Federal
METAL BAR
Solicitation # SPMYM226Q7576
This solicitation, numbered SPMYM226Q7576, seeks bids for a Metal Bar under a Level 1, unrestricted procurement issued by DLA Maritime - Puget Sound, with all submissions required to be completed through SAM.gov and submitted via email to jack.edwards@dla.mil or by fax by the deadline of July 2, 2026 at 9:00 PM Eastern Time. To be considered responsive, offerors must fully complete the solicitation packet including box 17A, sign all required sections on page 1, provide their CAGE code, quote FOB Destination Bremerton, WA, clearly annotate the lead time, and identify both the manufacturer and the country of origin for the products. Items classified as Commercial Off-The-Shelf (COTS) are exempt from NIST SP 800-171 cybersecurity requirements, but offerors must explicitly state this designation and provide supporting information to the contracting officer during bid submission; non-COTS providers must have a current, valid assessment under DFARS 252.204-7019 that is no more than three years old unless otherwise stipulated. The contract requires strict compliance with military traceability and marking standards, including MIL-STD-792 for permanent and temporary markings on metal bars, specifying mandatory inclusion of manufacturer name, specification, grade, size, contract number, traceability code, and “SML” designation where applicable. All items not shipped via parcel services must be palletized in compliance with ASTM-D-3951, and packaging must include required commercial markings such as NSN, quantity, contract number, and ship-to information. Final delivery is due on or before August 7, 2026, to the Puget Sound Naval Shipyard in Bremerton, WA, with acceptance occurring at that destination under government supervision. The Government reserves the right to conduct initial inspection at the contractor’s facility via DCMA and performs final acceptance with zero-defect criteria, requiring 100% inspection of traceability, NDT certifications, and material test reports. Invoicing must be processed exclusively through WAWF using the appropriate document types per line item pricing structure, with payments managed by the DLA Maritime - Puget Sound Contracting Division. Offerors must represent their business size status and provide UEI and CAGE codes, and all submissions must include certified data for chemical and mechanical properties per Exhibit J001 and comply with
Nonferrous Forging

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 337214
New
Federal
KIT, FURNITURE
Solicitation # SPMYM226Q7856
Vendors must be JCP certified to participate in this market research effort by the Defense Logistics Agency Maritime Puget Sound, as certification is required to access government layout drawings essential for the project. The requirement involves supplying, delivering, and installing a comprehensive furniture kit including 80 cubicles, 7 offices, 3 conference rooms, 5 print stations, 5 break areas, and 2 workbench areas, all in strict adherence to the Statement of Work and government-provided layout plans. The project falls under NAICS code 337214 and is designated as a Small Business Set Aside, meaning only small businesses are eligible to respond. While no formal solicitation exists at this time, interested parties are encouraged to submit voluntary capability statements detailing their organizational capacity, staff expertise, and supporting documentation alongside their CAGE code, contact information, and business size. All submissions must be emailed to the designated point of contact by 10:00 a.m. PST on August 6th, 2026, and failure to include JCP certification will disqualify responses. The government will use this input to determine the appropriate procurement method, and no financial liability is assumed for costs incurred in submitting information.
Office Furniture (except Wood) Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 811212
Federal
Warranty, Maintenance & Repair ServicesThis contract provides comprehensive post-delivery technical support, preventive maintenance, and repair services specifically for HandyScan 3D scanning units operated in industrial environments. The services are designed to ensure uninterrupted performance and longevity of the equipment, with all work performed in accordance with industry standards and under the oversight of the Department of Defense through DLA Maritime - Puget Sound. The scope encompasses proactive maintenance measures to prevent system failures, timely repairs to restore functionality, and responsive technical assistance tailored to the high-demand conditions of industrial use. The contract is structured as a small business set-aside under the SBA program, with the NAICS code 811212 indicating it pertains to electronic and precision equipment repair and maintenance. Performance is required at the designated location in Bremerton, Washington, with a zip code of 98314. Although the solicitation number and point of contact are not provided, the contract was posted on July 1, 2026, and is classified as a subcontract under federal procurement regulations. All work must comply with federal standards and be executed by a qualified small business entity to meet the set-aside requirement.
Computer and Office Machine Repair and Maintenance

POSTED

about 1 month ago

DEADLINE

N/A
View Details