Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on September 24, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Device, Fuel Tank Instl/Rem

Closed
N6833525Q0308Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924
New
DIBBS
BINDER, LOAD
Solicitation # SPE8EF-27-T-0188
Solicitation SPE8EF-27-T-0188 is a request for quotations issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction for the procurement of 61 units of Load Binders, identified by NSN 3990-01-554-6200 and Columbus McKinnon Corporation part number D060164. The requirement is designated as a total small business set-aside under FAR 19.5, with a response deadline of November 9, 2026. Delivery is required within 167 days after order, with a need ship date of April 26, 2027, and a final required delivery date of September 13, 2027. The items are to be delivered FOB Origin to DLA Distribution Red River in Texarkana, Texas, where both inspection and acceptance will take place. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though DLA Master List technical and quality requirements take precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses are incorporated, including DFARS 252.204-7012 for safeguarding covered defense information and various prohibitions regarding hazardous materials and covered telecommunications equipment. Offerors must maintain current certifications in the System for Award Management and provide safety data sheets where applicable to be considered responsible for award.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

in 12 days
NAICS: 333924
New
SLED
New Warehouse Forklift
Solicitation # 2027-IFB-035
Wicomico County, Maryland, is soliciting sealed bids under solicitation number 2027-IFB-035 for the procurement and delivery of one new, current-production, sit-down, counterbalanced forklift truck. The equipment must be suitable for both indoor and outdoor industrial material handling, featuring a minimum rated capacity of 5,000 lbs, LPG fuel, and solid tires. Technical requirements specify a maximum overall height of 85 inches and a maximum fork height of 185 inches. The unit must be delivered fully assembled, operational, and compliant with all applicable federal, state, local, and OSHA standards by the requested delivery date of December 1, 2026. The County may also consider an add-alternate for forklift operator training. Bids must be submitted electronically via the OpenGov portal by November 4, 2026, at 2:30 p.m. To be considered responsive and responsible, vendors must provide a Maryland Certificate of Status, an executed Affidavit of Qualification to Bid, three references from the last 12 to 36 months, and detailed warranty information. Award will be granted to the lowest responsive and responsible vendor who is current on County personal property taxes. The successful contractor must adhere to Wicomico County Standard Terms and Conditions, which include comprehensive insurance requirements for general liability, professional liability, automobile, and workers compensation. Payment will be issued within 30 calendar days following the receipt of a proper invoice for accepted equipment.
Corrections

POSTED

about 9 hours ago

DEADLINE

in 7 days
NAICS: 333924
New
Federal
Vacuum Lift Assist
Solicitation # W911S227U0082
Solicitation W911S227U0082 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of one new Vacuum Lift Assist unit. The government is seeking a SmartLift US, Inc. model SL 409 HLE RT or an equal product that meets specific technical requirements, including a minimum standard lifting capacity of 950 lbs and a minimum extended boom lifting capacity of 220 lbs. This is a Total Small Business Set-Aside under NAICS code 333924. The contract requires the delivery of new equipment only, prohibiting used or remanufactured products, and must include all relevant schematics, user manuals, maintenance manuals, and a minimum one-year parts and labor warranty. The award will be granted to the responsible offeror whose proposal is most advantageous based on price and technical factors. Delivery is required F.O.B. destination to RIA-JMTC 61299, with a preferred delivery timeframe of 30 days. All quotes must be submitted via the PIEE solicitation module by the specified deadline. Offerors are required to provide a completed certification of the country of origin to avoid being rejected as nonresponsive. The procurement is subject to various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including Buy American requirements and cybersecurity standards for safeguarding covered defense information.
W6QM Micc-Ft Drum

POSTED

about 13 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

This contract involves the procurement of a device designated as the Fuel Tank Installation/Removal (P/N: 3218AS575-1) to support the Foreign Military Sales (FMS) program for Brazil, specifically related to the H-60R helicopter. The solicitation was posted on September 24, 2025, with a response deadline of October 20, 2025. It is set aside exclusively for small businesses under the SBA's total small business set-aside category, emphasizing opportunities for small enterprises to participate. The contract is managed by the Navair Warfare Center Aircraft Division, part of the Department of the Navy, located at Joint Base MDL in New Jersey. The procurement falls under NAICS code 333924, which pertains to aircraft engine and parts manufacturing. The primary point of contact for this solicitation is Duane Hines, reachable via email or phone. The contract aims to fulfill specific requirements related to the installation and removal of fuel tanks for the H-60R program, supporting international military sales to Brazil. Further details and updates can be accessed through the provided link on SAM.gov.

General Info

NAVAIR seeks small businesses to supply fuel tank device for Brazil's H-60R helicopter, deadline October 20, 2025.

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

Place of Performance

NJ

Set-Aside

SBA

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Office AddressJOINT BASE MDL, NJ, 08733, USA

Full Description

Show more
This procurement is for Device, Fuel Tank Instl/Rem P/N: 3218AS575-1 in support of Foreign Military Sales (FMS) Brazil case BR-P-SDE H-60R program.

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 332912
New
Federal
HIGH LIFT ADAPTER ADU-954/E, Outriggers, Push Up Adapter
Solicitation # N6833526R1091
Solicitation N68335-26-R-1091 is a Small Business Set Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) fixed-price contract to manufacture and deliver peculiar support equipment for the F/A-18E/F and EA-18G programs. The scope of work includes the production of High Lift Adapter Outriggers (P/N 4097AS265-1), Push Up Adapters (P/N 4097AS200-1), and MHU-191 Munitions Loaders (P/N 3992AS100-1), along with associated Proof Load Certificates. These items are destined for the US Navy, with delivery to Lakehurst, and the Royal Australian Air Force, with delivery to a freight forwarder in California. All equipment must be new, covered by a manufacturer warranty, and adhere to strict marking and packaging standards, including MIL-STD-130, MIL-STD-129R, and ASTM D3951-18. Award will be determined using a best-value trade-off process weighing price and delivery lead time as approximately equal factors. To be technically acceptable, offerors must be registered small businesses in SAM.gov, propose a delivery schedule of eight months or less, and provide a detailed delivery narrative. Critical compliance requirements include CMMC Level 2 certification and a current NIST SP 800-171 assessment recorded in the Supplier Performance Risk System. Proposals must include comprehensive cost and pricing data, with certified data required for thresholds exceeding 10 million dollars. All submissions are due by November 23, 2026, to the designated point of contact.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 26 days
View Details
NAICS: 336419
New
Federal
Adapter, Hellfire Missile (Upper) and Adapter, Hellfire Missile (Lower)
Solicitation # N6833526Q1186
The Naval Air Warfare Center Aircraft Division (NAWC-AD) is soliciting quotes for a Firm Fixed Price contract to procure 20 units of Upper Hellfire Missile Adapters (Part 1517AS106-1) and 20 units of Lower Hellfire Missile Adapters (Part 1517AS107-1), along with associated technical data. These items support the AH-1Z and UH-1Y Foreign Military Sales case for the Czech Ministry of Defense. This procurement is a 100% Small Business Set-Aside under NAICS code 336419. The final deadline for submission is November 10, 2026, with all proposals required to be submitted electronically to the point of contact, Juan Carlos Belmonte. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) method. To be considered technically acceptable, offerors must be a certified small business, provide pricing for all CLINs, and commit to a delivery schedule of 90 calendar days after the award date. Due to the presence of Controlled Unclassified Information (CUI) and export-controlled technical data, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 self-assessment via the Supplier Performance Risk System (SPRS) to access the technical data packages. Additionally, the contract requires strict adherence to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Shipping is quoted as FOB Origin, with hardware delivery to Gulfport, Mississippi, and technical data delivery to Joint Base MDL, New Jersey.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS