This Solicitation opportunity from Utah was posted on November 19, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DFCM Construction - Prequalified Hazmat Stage II - Davis Technical College- Davis Technical College- Support Services Renovation Abatement - Project #23369220

Closed

CR26026State & Local

Submission Closed12/08/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924

New

SLED

Two (2) 940 Rough Terrain Forklifts

Solicitation # WMATA-0000010949

The Washington Metropolitan Area Transit Authority is soliciting bids for the procurement of two 940 Rough Terrain Forklifts. This solicitation, identified by number WMATA-0000010949, falls under NAICS code 333924 and is managed through the agency's Virginia organization. The solicitation was posted on October 27, 2026, with a strict response deadline of October 30, 2026, at 7:00 PM. Interested parties must submit their responses via the official supplier portal by the specified cutoff date.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

30 Ton Heavy Duty Wrecker

Solicitation # W91QVN27QA001

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

Supply, Delivery and Maintenance of Electric Lift Trucks (Forklitfts)

Solicitation # tender_22286

The Ministry of the Solicitor General for the Government of Ontario is seeking a provider for the supply, delivery, and maintenance of three fully electric forklifts: one stand-up reach truck and one sit-down forklift for the Central East Correctional Center, and one sit-down forklift for the Central North Correctional Center. The equipment must be capable of indoor and outdoor operation, featuring a triplex mast, a minimum load capacity of 3,500 pounds, a minimum lift height of 17 feet, 42-inch forks, and both side shift and tilt capabilities. The scope of work extends beyond delivery to include warranty coverage, preventative maintenance, repair services, and technical support to minimize downtime and ensure health and safety compliance. The procurement process follows a four-stage evaluation: a mandatory requirements review, a pass/fail technical data sheet assessment, a scored technical response, and a commercial evaluation based on a relative pricing formula. Bidders must provide a nine-digit CRA business number and certify their business continuity plans, customer satisfaction survey practices, and environmental sustainability initiatives. Delivery is prioritized for the 2026-27 fiscal year, with options ranging from four weeks to a final deadline of March 29, 2027. Successful contractors must adhere to strict occupational health and safety standards, including OHSA compliance, WSIB coverage, and the provision of an accessible emergency evacuation plan.

POSTED

DEADLINE

Heavy-Duty Truck Tractor SupplyThis subcontract, managed by the Department of Defense under the 0411 Aq Hq Contract Augmented agency, requires the supply of 15 brand new 6x4 Truck Tractors for prime contractors working on USFK vehicle procurement projects. The selected provider must ensure all units meet specific physical and performance characteristics and must submit comprehensive technical specifications and manufacturer documentation. A critical requirement of the agreement is the provision of a Vehicle Manufacturer’s Certificate that explicitly designates USFK as the first owner. The contract falls under NAICS code 333924 and mandates the full delivery of all 15 heavy-duty units in accordance with the established guidelines.

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

Solicitation # W91QVN27RA006

Solicitation W91QVN27RA006 is a firm fixed price, unrestricted contract for the procurement and delivery of 15 brand new 6x4 truck tractors to support the 19th Expeditionary Sustainment Command theater-wide operations. The vehicles must feature a diesel, in-line 6-cylinder engine with approximately 12.7-liter displacement and a 12-speed automated manual transmission. Delivery is scheduled for calendar year 2027, with a performance window from January 1 to December 31, 2027, and must be completed within 240 calendar days of the award or notice to proceed. The delivery is FOB Destination, door-to-door to Camp Humphreys, and requires coordination with the point of contact three working days in advance. This contract is uniquely funded by the Government of the Republic of Korea (ROK), which will pay the contractor directly; no United States appropriated funds are obligated. Invoices must be submitted in five copies and clearly cite MOA Contract - funded by ROK MND. Award will be based on the most advantageous offer, with technical qualifications and price weighted approximately equally. Technical evaluations are pass/fail based on compliance with salient characteristics, while price is reviewed for reasonableness and completeness. Offerors must submit quotations electronically via the PIEE Solicitation Module by November 12, 2026, including a plan to obtain a manufacturer's certificate specifying USFK as the first owner and required Korean contractor certifications.

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

3930--Combined Warehouse Forklift With 26' Lift Height

Solicitation # 36C25927Q0031

The Department of Veterans Affairs, Network Contracting Office 19, has issued a Sources Sought Notice for the procurement of a new sit-down rider lift truck and battery for the Oklahoma City VAHCS Warehouse. The primary objective is to acquire equipment capable of reaching a minimum lift height of 26 feet to accommodate higher racking systems in a new warehouse facility. The requirement specifies a Crown Forklift model FC5715-40 or an equal alternative, featuring a minimum load capacity of 4,000 lbs, 36-volt power, and a Vforce VTA battery compatible with the existing Crown Vforce V-HMF3 Series charging station. Additional technical requirements include 36-inch forks, adjustable outriggers, dual AC drives, side shift and forward back tilt capabilities, and integrated brake, backup, and front-mounted work lights. This request is for information and planning purposes and does not constitute a formal solicitation. Interested contractors must submit a capabilities statement and a detailed product description, including the manufacturer's information and estimated delivery time, to Peyton Wilkerson by 15:00 MST on November 9, 2026. Submissions are limited to 8 pages and should be sent via email. The government has identified NAICS code 333924 as the primary classification for this effort, with a small business size standard of 900 employees, though respondents may suggest alternative codes that better represent the scope of work.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Solicitation # W911S227U0082

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0127

Solicitation SPE8EF-27-T-0127 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment Manu and Con for the procurement of 138 platform skids, identified by NSN 3990-01-653-4153 and part number 03159940011. The solicitation was posted on October 26, 2026, with a response deadline of November 5, 2026. This is not a small business set-aside, and all quotes must be submitted through the DLA Internet Bid Board System. The required delivery date is February 27, 2027, with a need ship date of April 12, 2027, delivered FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must provide a complete data package for approved and alternate parts for evaluation. Technical and quality requirements are governed by the DLA Master List, specifically RP001 for packaging and palletization, RA001 for general technical requirements, and RQ011 for the removal of government identification from non-accepted supplies. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, sustainable products, and safeguarding covered defense information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Heavy Equipment Rigging and InstallationThis subcontract for Heavy Equipment Rigging and Installation involves the delivery, unloading, positioning, and installation of a 28-ton Plasma Press/Punch for prime contractors working on Texas Department of Criminal Justice projects. The scope of work requires the use of heavy-lift cranes and rigging gear to transport the machinery, followed by precise leveling and securing the equipment to the facility floor in a designated area. To ensure operational safety and compliance, the contractor must possess valid rigging certifications and strictly adhere to all facility safety protocols. The project is categorized under NAICS code 333924, with a response deadline set for November 6, 2026.

Texas Department of Criminal Justice

POSTED

DEADLINE

Doc5883971531 Supply of Battery Operated Heavy Duty Forklift (2026)

Solicitation # 235245

TransLink, the South Coast British Columbia Transportation Authority, has issued solicitation number 235245 for the supply of battery operated heavy duty forklifts. This procurement process is managed through the Province of British Columbia and requires performance of the contract within British Columbia, Canada. The solicitation was officially posted on October 23, 2026, and interested parties must submit their responses by the deadline of November 12, 2026, at 9:00 PM. Further details and submission guidelines can be accessed via the BC Bid portal.

TransLink(South Coast British Columbia Transportation Authority)

POSTED

DEADLINE

Specialty Wheeled/Towed Equipment SupplyThis subcontract opportunity is for the supply of specialty wheeled and towed power equipment and accessories to support prime contractors working on projects for the Commonwealth of Massachusetts Operational Services Division. The scope of work involves the delivery of specialized machinery, including towed spreaders, aerators, and other wheeled power equipment, all of which must adhere to standard specifications. The project is based in Boston, Massachusetts, and falls under NAICS code 333924. Interested parties should note that the response deadline for this solicitation is December 18, 2026.

Operational Services Division

POSTED

DEADLINE

Agricultural Tractors & Loaders SupplyThis subcontract agreement focuses on the supply of agricultural tractors, skid steer loaders, and related accessories for prime contractors working on projects for the Commonwealth of Massachusetts Operational Services Division. The scope of work involves the delivery of operational heavy machinery and attachments to various state agencies, with all equipment required to strictly adhere to the RMV Truck Safety Standards. The contract is managed by the Massachusetts Operational Services Division and is centered in Boston. Interested parties must submit their responses by December 18, 2026, to provide the necessary machinery under NAICS code 333924.

Operational Services Division

POSTED

4 days ago

DEADLINE

in about 2 months

AI Contract Overview

This contract involves a Stage II invitation for prequalified hazardous materials abatement work at Davis Technical College's main campus in Kaysville, Utah, with an estimated construction cost of $100,000. Only contractors who have successfully completed Stage I prequalification and are currently listed on the DFCM prequalified contractors list are eligible to bid. The scope centers on pre-construction abatement activities on the second story of the main campus services building, including removal of asbestos-containing materials such as duct sealants, fire-rated doors, and universal waste like fluorescent bulbs and PCB ballasts, all in compliance with regulatory standards and safety protocols. The procurement process emphasizes adherence to DFCM's standard conditions, submission of bids via the U3P portal, and participation in mandatory meetings and pre-bid procedures. Supporting documents include detailed scope of work, unit cost sheets for bid pricing, and comprehensive general conditions that govern project execution, safety, modifications, and claims. The project schedule specifies milestones like Substantial and Final Completion, with inspection and acceptance procedures conducted at the site by DFCM and the architect/engineer team. The contract emphasizes conflict of interest disclosures, bonding and insurance requirements for subcontractors, and contractual obligations for safety and compliance, although specific FAR clauses, detailed evaluation factors, and formal contract type designations are not explicitly provided. The bid submission process mandates electronic proposals through U3P, with no page limits specified, and requires a completed subcontractor list and adherence to all instructions for timely and compliant offer submission.

General Info

Agency

Utah → DFCM - Division of Facilities Construction and Management

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

Place of Performance

UT, USA

Set-Aside

NONE

Documents

4-3-23369220 Unit Cost Sheet for Floor 2 Support Services Remodel

1 page · unit-cost-sheet

High

Asbestos and Hazardous Materials Scope of Work for Davis Technical College Remodel

241 pages · sow

High

DFCM General Conditions August 2020 Revision July 2023

60 pages · general-conditions

High

Stage II Invitation to Bid for Hazmat Contractors - DFCM Project 23369220

8 pages · itb

High

3-C-DFCM Health Insurance Statement of Compliance Form Revised 7.28.25

1 page · other

Low

Subcontractors List Form Instructions 7.1.2021

3 pages · instructions

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedNov 19

Solicitation

Response DeadlineDec 8

Deadline has passed

Submission Closed

12/08/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyUtah → DFCM - Division of Facilities Construction and Management

ContactsNo contacts available

OfficeN/A

Organization / AgencyUtah → DFCM - Division of Facilities Construction and Management

Office AddressN/A

ContactsNo contact information available

Full Description

Stage II Invitation to Bid Only contractors who have been prequalified under a Stage I Prequalification for Contractors and are currently on the respective DFCM Prequalified Contractors list as of the date of this solicitation are eligible to bid on this project. The State of Utah - Division of Facilities Construction and Management (DFCM) is requesting bids for the referenced project: Project Description: Pre-Construction abatement for the second story of the main campus services building according to the provided scope of work. Construction Cost Estimate: $100,000.00