This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 25, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Direct Drive Test Stand

Closed

N6852023R0084Federal

Submission Closed09/01/2023, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aviation Component Parts SupplierThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of replacement parts, seals, and hardware for Air Pressure Regulators, specifically part number 166001039791. These components are intended for prime contractors working on Department of the Navy aviation projects. The supplier is required to provide OEM or approved equivalent aviation-grade seals and valves, ensuring all materials meet strict quality and origin standards. Key deliverables include the physical parts along with necessary quality certifications in compliance with Trade Agreements and hazardous materials modal regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. The contract falls under NAICS code 336413, focusing on the specialized procurement of aviation component parts.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flap Assembly Component FabricationThis subcontract for Flap Assembly Component Fabrication involves the production of precision-machined parts for prime contractors supporting Department of the Navy C130 aircraft projects. The scope of work includes the fabrication of structural ribs, hinges, and replacement brackets utilizing CNC machining and aerospace-grade alloys. To ensure quality and compliance, the provider must hold SAE AS9100 or ISO 9001 certification and deliver all components with full material and dimensional certifications. Managed by Navsup Weapon Systems Support under NAICS code 336413, the contract mandates strict adherence to DFARS 252.211-7003 for IUID marking and the provision of mill test reports. The solicitation was posted on October 20, 2026, with a response deadline of October 26, 2026.

Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in 6 days

General Info

Agency

Department Of Defense → Fleet Readiness Center

Contract Value

$219,935

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

MD, USA

Set-Aside

SBA

Awardee

IDEAL AEROSMITH INC

Award Issued Date

09/13/2023, 12:00:00 AM UTC

Documents

Building 378-1 Shop Existing Courtesy Layout - Direct Drive Test Stand

specifications

High

CDRLs - Direct Drive Table Test Stand

cdrl

High

RFQ N6852023R0084 - Direct Drive Table Test Stand

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedAug 17

Combined Synopsis

Notice updatedAug 25

The notice description changed.

Response DeadlineSep 1

Deadline has passed

Submission Closed

09/01/2023, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Fleet Readiness Center

Contacts2 people available

OfficePATUXENT RIVER, MD, 20670, USA

Organization / AgencyDepartment Of Defense → Fleet Readiness Center

Office AddressPATUXENT RIVER, MD, 20670, USA

Contacts

Alex Julian

contact@example.gov

Jay Hughes

contact@example.gov

Full Description

Updated on 25AUG2023 to answer a question. Question: You are showing a layout with many work stations. Can you confirm the QTY of systems that you are interested in us quoting? Answer: The RFQ shows Direct Drive Table Test Stand quantity of (one) 1 REQUEST FOR QUOTE (RFQ) Direct Drive Test Stand Title of requirement: This is a synopsis/solicitation for the acquisition of one (1) Direct Drive Test Stand, transportation/shipping, training, and installation (to include on-site offloading and rigging) IAW the attached RFQ and Statement of Work. This announcement constitutes the only solicitation; Quotes are being requested and a written solicitation will not be issued. This requirement is being posted by Commander, Fleet Readiness Center (COMFRC) for the Fleet Readiness Center, South West (FRCSW). SEE ATTACHED RFQ Set Aside: This will be a 100% Total Small Business set-aside. NAICS code for this announcement is 336413 with small business size standard of 1,250 employees. Quotes only from small business concerns will be accepted. Quotes received from concerns that are not small businesses shall be considered nonresponsive and will be rejected. Solicitation Closing Date: Quotes are due by the closing date/time on September 1, 2023 4:00 PM EST. Interested parties shall submit their quotes via email: alexander.m.julian2.mil@us.navy.mil In addition to information required hereunder, Quotes shall include the following: Price (inclusive of shipping and installation) and any discount terms Vendor Contact Name, and contract information Place of Manufacture Terms of Warranty Any Lead time for manufacturing A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the RFQ. This may include product literature, or other documents, if necessary To obtain or renew a Unique Entity ID Number and/or CAGE code, please visit https://beta.sam.gov/. All companies must be registered in the System for Award Management at https://beta.sam.gov/ to be considered for award. The Government will not provide contract financing for this acquisition. Invoice instructions shall be provided at time of award Basis for Selection: Pursuant to FAR 12.602 contract award will be made using Simplified Acquisition Procedures in accordance with FAR 13.106. Offeror's submissions will be evaluated and award will be made to the lowest-price, technically acceptable offeror with adequate Supplier Performance Risk System (SPRS) rating, considering the following factors: Technical, Price and Past Performance. (1) Technical: The quote must be rated as technically acceptable to be eligible for award. In order to be technically acceptable, the Quote must demonstrate compliance with all terms and conditions of the solicitation and compliance with all salient characteristics identified in the Statement of Work. The quote must demonstrate that the vendor can meet the requirements to supply the Direct Drive Test Stand, transportation/shipping, training, and installation (to include on-site offloading and rigging). The Quote must provide sufficient detail to demonstrate that the vendor understands the scope of the Government's requirements. Quotes that fail to meet the above will be technically unacceptable and rejected. (2) Price: Award will be made to the lowest price technically acceptable offer with adequate SPRS Rating. (3) Past Performance: The Supplier Performance Risk System (SPRS) application (https://www.sprs.csd.disa.mil) will be used in the evaluation of suppliers' past performance in accordance with DFARS 213.106-2(b)(i). Discussions: The government intends to award a purchase order without discussions with respective vendors/quoters. The government however, reserves the right to conduct discussions if deemed in its best interest. Place of Performance, Inspection, and Acceptance: Deliver FOB Destination, no later than 365 days from date of contract award. List Any Acceptance Criteria: All or none basis. Cost of Quotes: Expenses incurred in the preparation of quotes in response to this RFQ are the vendor's sole responsibility and not reimbursable by the Government. Questions and Inquiries Concerning This RFQ: All questions, requests for supporting documents, and inquiries concerning any aspect of this requirement including the RFQ must be submitted NLT 1600 EST on August 25th, 2023 in writing to Alex Julian and Jay Hughes, alexander.m.julian2.mil@us.navy.mil; jay.h.hughes.mil@us.navy.mil. Telephone requests will not be honored. The Government's response to inquiries will be made in writing. Any resulting additions, deletions or changes to the RFQ will be updated on this SAM.gov posting. Please Note: A quotation does not constitute an award; therefore, an obligation to your company is not official until you receive a purchase order.