Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Disassemble, inspect, analize and test LM2500 Single Shank Turbine

Active

N65540-14-R-5023Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Navy is seeking services to disassemble, inspect, analyze, test, and perform light cleaning on LM2500 Single Shank Turbine gas turbine assets that are radiologically controlled under RADCON standards. The contract focuses on the teardown, evaluation, and appropriate repackaging of these specialized turbine components to ensure their operational integrity and compliance with safety protocols. This solicitation was posted by the Department of Defense's Naval Surface Warfare Center Carderock Division, located in Bethesda, Maryland. The contract is identified under solicitation number N65540-14-R-5023 and falls under NAICS code 336412, which pertains to aircraft engine and engine parts manufacturing. While the precise place of performance is not specified, the work involves handling sensitive and critical Navy equipment. Interested parties can reach out to the designated contract specialist, Peter J. Palma, for further details. The solicitation is listed as a presolicitation, indicating that formal bidding has not yet commenced.

General Info

Navy contract for LM2500 turbine teardown, inspection, testing, and cleaning under RADCON standards.

Agency

Department Of Defense → Nswc Carderock

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

MD

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation

PostedMar 4

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Carderock

Contacts1 person available

OfficeBETHESDA, MD, 20817-5700, USA

Organization / AgencyDepartment Of Defense → Nswc Carderock

Office AddressBETHESDA, MD, 20817-5700, USA

Contacts

Peter J. PalmaContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

The Navy intends to procure services to teardown, inspection, light cleaning, evaluation and packaging of USN radiologically controlled (RADCON) gas turbine assests.

Similar Contracts

Same NAICS industry code

Precision Manufacture of F100 Spare Part P4078845This subcontract involves the precision manufacture of spare part P4078845 for the F100 platform, supporting prime contractors who deliver supply contracts to the Department of Defense via DLA Aviation at Oklahoma City. The scope of work includes the procurement of raw materials and the use of precision CNC machinery to perform machining and fabrication in strict accordance with the Engineering Data List and Qualification Requirements. The contractor is responsible for delivering between 7 and 1,500 aerospace-grade units and completing all necessary Source Approval Request packages. This effort falls under NAICS code 336412, with a response deadline set for November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

NOZZLE,TURBINE,AIRC

Solicitation # SPRTA1-27-R-0048

Solicitation SPRTA1-27-R-0048 is for the procurement of nickel turbine nozzles for the F110 engine, designed to increase airflow velocity. The contract is expected to be issued on November 5, 2026, with a closing date of December 9, 2026. This is a firm fixed price acquisition for a minimum of 7 and a maximum of 42 units, with a specific requirement for 28 units to be delivered by July 31, 2027. The items are classified as Critical Safety Items and require Item Unique Identification. The procurement is managed by the DLA Aviation office at Tinker AFB, Oklahoma. While General Electric Company is listed as a qualified source, all responsible sources may submit capability statements or proposals. The government has determined that these supplies are available from a limited number of sources and will not be using commercial item acquisition policies. Interested parties may contact the appointed Ombudsman for concerns during the proposal development phase.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

CASE,COMBUSTION, CHA

Solicitation # SPRTA1-27-R-0005

Solicitation SPRTA1-27-R-0005 is a request for the procurement of alloy combustion cases for the F110 engine. The items are designated as Critical Safety Items and require Item Unique Identification. The government is seeking a firm fixed price contract for a minimum of 5 and a maximum of 29 units, with a specific requirement for 19 units to be delivered by July 29, 2027. General Electric Company is listed as a qualified source, and the acquisition is justified based on limited responsible sources. The estimated issue date for the solicitation is November 5, 2026, with a closing date of December 9, 2026. The award is anticipated approximately 45 calendar days after the closing date. This procurement is not a set-aside and does not follow Far Part 12 commercial item policies. Interested parties may submit capability statements or proposals via sam.gov, and an Ombudsman has been appointed to handle contractor concerns during the proposal development phase.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

F-100 Duct, Fan, Aircraft G

Solicitation # SPRTA126R2101

Solicitation SPRTA126R2101, issued by DLA Aviation at Oklahoma City, seeks the procurement of new manufactured F-100 Aircraft Fan Ducts (NSN 2840-01-387-2657NZ). This requirement is for a base quantity of 26 units, with a minimum of 7 and a maximum of 42 units, to be delivered by December 31, 2028. The items are designated as Critical Safety Items and are subject to export controls. Due to the technical nature of the components, the government intends to solicit under limited sources, identifying GKN Aerospace Chem-Tronics and RTX Corporation as approved sources. The solicitation is unrestricted, though it includes preferences for Small Business, HUBZone, and Service-Disabled Veteran-Owned Small Businesses. The award will be determined using the Best Value Process, Performance Price Tradeoff, where technical acceptability and small business participation are prerequisites. For acceptable proposals, cost and past performance, primarily evaluated via the Supplier Performance Risk System, will be weighted approximately equally. Contractors must adhere to strict quality and manufacturing standards, including ISO 9001-2015, AMS 4928, and MIL-STD-2073 for packaging. Additionally, the contract mandates compliance with CMMC cybersecurity levels for handling controlled unclassified information and requires Item Unique Identification (IUID). Following an amendment, the response deadline for this solicitation is December 9, 2026, at 3:00 PM CST.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

F100 Duct, Fan, Aircraft G

Solicitation # SPRTA123R0882

Solicitation SPRTA123R0882, issued by the DLA Weapons Support at Oklahoma City, is for the manufacture and supply of seven new titanium Aircraft Engine and Engine Parts, specifically the Duct, Fan, Aircraft G (NSN 2840-01-387-2657 NZ, Part Number 4084856). This component is designated as both a High Value Item and a Critical Safety Item, which strictly prohibits direct part marking; only the bag/tag method is authorized. The contractor must adhere to ISO 9001-2008 quality standards and follow specific packaging and marking requirements, including MIL-STD-2073-1 for packaging, MIL-STD-129 for shipping markings, and MIL-STD-130 for item unique identification. The contract will be awarded using the Best Value Process with a performance-price tradeoff. Technical acceptability is a mandatory prerequisite, after which the government will evaluate cost and past performance on an approximately equal basis. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to the Buy American Act and includes a price evaluation preference for HUBZone small business concerns. Delivery is set as FOB Origin, with the final shipment destined for DoDAAC DROE00.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

SHIPPING AND STORAGE_End_Item_F100_NSN_8145014503984NZ_PN_P4078845

Solicitation # FD20302700577

The Department of the Air Force, through the Air Force Sustainment Center and the 421st Supply Chain Management Squadron, is conducting market research via a Sources Sought Synopsis to identify potential sources for the new manufacture of spares for the F100 platform. The specific requirement involves the procurement of part number P4078845 (NSN 8145014503984NZ), with an estimated requirement of 7 units. This is a new spares buy with no repair requirements. The scope of work includes providing all labor, materials, facilities, and equipment for component manufacture, inspection, testing, preservation, packaging, and shipping. Performance will take place at Tinker AFB, Oklahoma. This effort is currently in the market research phase to determine the best acquisition strategy and whether the requirement can be a Small Business Set-Aside. The government is interested in all business types, including large and various small business categories under NAICS code 336412. Interested sources must select the Add Me to Interested Vendors button and provide detailed business information, including CAGE code, UEI, and ownership status. Additionally, potential sources are required to complete a Source Approval Request (SAR) package via DoD SAFE and may be responsible for nonrecurring engineering costs. Technical data is governed by Qualification Requirements and the Engineering Data List; if data is not provided, sources must independently acquire the necessary technical information.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

FUEL CONTROL,AFTERB

Solicitation # SPRTA1-27-R-0064

Solicitation SPRTA1-27-R-0064 is a firm fixed price contract for the procurement of aluminum fuel controls for the F101 engine, specifically designed to meter fuel to the augmenter. The items are classified as Critical Safety Items and require Item Unique Identification. The government is seeking a minimum of 5 and a maximum of 32 units, with a specific requirement for 21 units to be delivered by July 30, 2020. General Electric Company is listed as a qualified source, and the acquisition is justified based on limited responsible sources. The estimated issue date for the solicitation is November 5, 2026, with a closing date of December 9, 2026. The award is anticipated approximately 45 calendar days after the solicitation closes. This procurement is not a set-aside and does not follow Far Part 12 commercial item policies. Interested parties may submit capability statements or proposals via sam.gov, and an Ombudsman has been appointed to handle contractor concerns during the proposal development phase.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

COMPUTER,ENGINE

Solicitation # SPRTA1-27-R-0047

Solicitation SPRTA1-27-R-0047 is for the procurement of Engine Monitoring System Computers for the F110 engine. These aluminum components are critical safety items used for fault isolation and troubleshooting during flight and ground operations. The government is seeking a firm fixed price contract for a minimum of 14 and a maximum of 83 units, with a specific delivery requirement of 55 units by July 28, 2027. The estimated issue date is November 4, 2026, with a closing date of December 9, 2026. While Hamilton Sundstrand Corporation is listed as a qualified source, the acquisition is not a set-aside, and all responsible sources may submit capability statements or proposals. The procurement will be handled through electronic procedures via sam.gov, and an Ombudsman has been appointed to address contractor concerns during the proposal phase.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

BLADE,COMPRESSOR,AI

Solicitation # SPRTA1-27-R-0008

Solicitation SPRTA1-27-R-0008 is for the procurement of Stage 1 Fan Compressor Blades for the F110 engine. These critical safety items are manufactured from 6a1-4v titanium and are identified by part number 2814M91P01 and NSN 2840-01-695-0035 PR. The government is seeking a firm fixed price contract for a minimum of 20 and a maximum of 122 units, with a specific delivery requirement of 81 units by July 15, 2028. The estimated issue date is November 5, 2026, with a closing date of December 9, 2026. While General Electric Company is listed as a qualified source and has received the three most recent awards for this item, the government will consider capability statements and proposals from all responsible sources. This acquisition is not a set-aside and does not follow Far Part 12 commercial item policies. Item Unique Identification is required, though export controls do not apply.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

CASE AND VANE ASSEM

Solicitation # SPRTA1-27-R-0046

Solicitation SPRTA1-27-R-0046 is a firm fixed price contract for the procurement of Case and Vane Assemblies used for airflow compression in F110 engines. The required components are made of Inconel 718, measure 27 by 27 by 7.5 inches, and weigh 60 lbs. This is designated as a Critical Safety Item requiring Item Unique Identification. The government is seeking a minimum of 21 and a maximum of 123 units, with a specific delivery requirement of 82 units by January 18, 2027. The estimated issue date is November 4, 2026, with a closing date of December 9, 2026. While General Electric Company is listed as a qualified source and has handled previous awards, the agency will consider capability statements from all responsible sources. There is no set-aside for this acquisition, and it is not being conducted under the policies for commercial items. Interested parties may contact the appointed Ombudsman for concerns during the proposal development phase.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Aircraft Inlet Cone Repair and Overhaul ServicesThis subcontract for Aircraft Inlet Cone Repair and Overhaul Services involves the teardown, evaluation, repair, and modification of aircraft inlet cones for prime contractors supporting Navsup Weapon Systems Support. The scope of work includes disassembling the components, executing repairs according to technical data for NSN 7RH 2840-14-567-4681 F7, and performing necessary environmental and performance testing. The final deliverable consists of four aircraft inlet cones returned in Ready For Issue condition. The project requires the use of specialized tooling and calibration that complies with ISO 10012 or NCSL Z540.3 standards. Performance will take place in Philadelphia, Pennsylvania, under NAICS code 336412. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026.

Navsup Weapon Systems Support

POSTED

about 21 hours ago

DEADLINE

Supply of Turbo-shaft Engine Test StandThis subcontract involves the procurement of one runnable turbo-shaft engine mounted on an operational test stand for aviation maintenance projects at Texas State Technical College. The required equipment must be comparable to the AeroTrain AE-32-250 or Allison 250 and must include all necessary turbine-specific controls and instrumentation. To ensure suitability for an educational environment, the system must adhere to aviation instructional safety standards and be delivered with complete manufacturer documentation and operating instructions. The solicitation was posted on November 3, 2026, with a response deadline of November 24, 2026. Managed by the Texas State Technical College System under NAICS code 336412, the contract focuses on providing prime contractors with the necessary hardware to support technical training and maintenance operations.

Texas State Technical College System

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

Propulsor Device Machining

Solicitation # N0016727Q1004

The Naval Surface Warfare Center Carderock Division (NSWCCD) is soliciting quotes for solicitation N0016727Q1004 to perform propulsor component machining for VIRGINIA Class propulsor devices. This firm-fixed-price contract is a total small business set-aside under NAICS 336611. The scope of work involves the fabrication of various piece parts, including body tubes, top caps, bottom caps, center masses, and shim rings. While the government provides raw materials for most components, the contractor is responsible for procuring mild steel ASTM A106 for the R4 shim rings. The period of performance extends from the date of award through July 18, 2027, with specific delivery dates for various line items requested by July 30, 2027. Award will be granted to the responsible quoter who provides a technically acceptable quote representing the best value, specifically the lowest evaluated price. Technical acceptability is determined on a pass/fail basis, and the government may consider past performance via the Supplier Performance Risk System (SPRS). Contractors must maintain a Quality Management System compliant with ANSI/ASQ/ISO 9001:2015 and meet CMMC Level 2 cybersecurity requirements. Deliverables include lot acceptance inspection results, certificates of conformance, and monthly progress reports. All parts must be cleaned with acetone and marked with unique item identifiers per MIL-STD-130 before being shipped to destinations in Bethesda, Maryland, or Kittery, Maine. Questions are due by November 4, 2026, and final quote packages must be submitted by November 12, 2026.

Ship Building and Repairing

POSTED

DEADLINE

Foaming Corrosion Preventive Compound (CPC) SupplyThis subcontract involves the supply of a specialized foaming Corrosion Preventive Compound (CPC) for prime contractors working on projects for the Naval Surface Warfare Center Carderock Division under the Department of Defense. The required product must be specifically formulated for foaming applications to treat void spaces up to 4 inches in diameter and 2 feet in length, curing into a non-tacky film. To ensure durability in extreme environments, the compound must adhere to ISO 12944-6 C5 standards for very high corrosivity. The selected provider is responsible for delivering the CPC product along with all necessary Safety Data Sheets and Technical Data Sheets. This opportunity falls under NAICS code 325998, with a response deadline set for November 23, 2026.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

RFI to conduct market research to identify potential vendors with products available that meet the capability criteria listed

Solicitation # 27-SIMACQ-CD-61-0006

The Naval Surface Warfare Center Carderock Division is issuing this Request for Information under solicitation number 27-SIMACQ-CD-61-0006 to conduct market research for foaming Corrosion Preventive Compound (CPC) barriers. These barriers are intended to protect inaccessible interior parts of ground vehicles and tactical assets, such as frame rails and enclosed cavities, in very high corrosivity environments. The government is seeking potential vendors capable of providing a non-permanent coating that can cover void spaces up to 4 inches in diameter and 2 feet in length, cure to a non-tacky film, and provide corrosion prevention for at least one year. The product must be removable via high-pressure steam or solvent-based cleaners and maintain a shelf life of at least two years. This is a sources-sought notice for planning purposes only and does not constitute a formal solicitation or a promise to issue a Request for Proposal. However, the anticipated future procurement is expected to be a firm fixed price contract, with a Request for Quote likely to be issued around January 2027. Interested respondents from all business sizes, including small and disadvantaged businesses, must submit a written Capability Statement by November 23, 2026. Submissions must include the vendor's CAGE code, business size status, and technical documentation such as Safety Data Sheets and Technical Data Sheets to verify the product's ability to meet the specified foaming and durability requirements.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Building 143 Concrete Scale Pad Expansion and Dock Leveler Replacement

Solicitation # N00167-27-SIMACQ-CD-102-0003

The Building 143 Concrete Scale Pad Expansion and Dock Leveler Replacement project, managed by the Department of Defense under Nswc Carderock, involves extending an existing concrete pad and replacing a dock leveler in kind. This presolicitation, identified by solicitation number N00167-27-SIMACQ-CD-102-0003, falls under NAICS code 236220 and will be performed in Bethesda, Maryland. The opportunity was posted on October 30, 2026, with a response deadline set for November 9, 2026, at 3:00 PM. Interested parties may coordinate with primary point of contact Pamela Ganster or secondary contact Marlanea Kirkbride for further details regarding the submission process.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Non-Recurring Engineering (NRE) and Technical SupportThis subcontract for Non-Recurring Engineering (NRE) and Technical Support supports prime contractors on projects for the Naval Surface Warfare Center Carderock Division within the Department of Defense. The scope of work focuses on initial engineering and tooling design, where the contractor is responsible for translating technical drawings into actionable manufacturing processes and comprehensive plans. Key activities include utilizing CAD/CAM software for process design and conducting virtual kickoff meetings to ensure technical alignment prior to production. The opportunity is designated as a total Small Business Set Aside under NAICS code 541330. Interested parties must adhere to the response deadline of November 12, 2026. The primary objective of the engagement is the successful delivery of all NRE activities and the establishment of technical alignment to facilitate efficient production cycles.

Engineering Services

POSTED

DEADLINE

Precision Machining of Device Piece PartsThis small business set-aside subcontract involves the precision machining of device piece parts for prime contractors supporting the Naval Surface Warfare Center Carderock Division. The scope of work includes the manufacture of body tubes, center mass, shim rings, top caps, and bottom caps using Government Furnished Materials in strict accordance with provided technical drawings. To qualify, contractors must possess CNC machining equipment and maintain an ISO 9001:2015 quality management system. Additionally, the provider must ensure full compliance with DFARS 252.204-7012 regulations for the delivery of all finished machined components.

POSTED

DEADLINE

NSWCCD York Chill Pump Replacement

Solicitation # N0016727Q1002

The Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting quotes for the procurement, delivery, and turn-key installation of a replacement pump (Pump No. 1, Model YLAA0080SJ46X, Serial SEMM-609950) for York Chiller No. 1 located in Building 157. This equipment is critical for providing chilled-water cooling to the Building 13 Server Rooms. The project is a Firm-Fixed-Price award and is restricted to OEM certified Johnson Controls technicians due to the proprietary nature of the hardware and firmware. The scope of work includes the removal and disposal of the old pump, installation of the new unit, and ensuring proper operation without leaks. All work must be completed on or before December 18, 2026, at the Bethesda, Maryland facility. This procurement is open to full and open competition and is not set aside for small businesses. Award will be based on the Lowest Price Technically Acceptable (LPTA) method, with technical acceptability evaluated on a pass/fail basis. Interested vendors must submit quotes on official company letterhead, including all-inclusive pricing and business size, via email to the contract specialist and contracting officer. While the initial deadline was November 6, 2026, Amendment 0001 extended the response deadline to November 16, 2026, at 9:00 AM EDT. A pre-quote site visit is scheduled for November 10, 2026, and base access requests must be submitted by November 4, 2026. The contract requires compliance with MIL-STD-130 and MIL-STD-129 for item identification and marking, and payment will be processed through the Wide Area WorkFlow (WAWF) system.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

COLUMBIA Class Tailcone Manufacture

Solicitation # N0016726R1005

The Naval Surface Warfare Center Carderock Division is soliciting proposals for the manufacture and acquisition of COLUMBIA Class Submarine Propulsor Tailcone Kits. The scope of work includes the procurement of materials, manufacturing, painting, and delivery of up to eight tailcone kits over a five-year period of performance, alongside associated engineering services for design reviews and changes. The contract utilizes a hybrid pricing structure consisting of Fixed Price Incentive Firm Target for hardware, Cost Plus Fixed Fee for engineering services and manufacturing strategy, and Cost No Fee for data and other direct costs. Award will be determined via a best-value tradeoff process, with technical capability weighted as the most significant factor, followed by cost, past performance, and small business participation. Key deliverables include a final certification package, a detailed manufacturing plan, and monthly status reports. Due to the critical nature of the components, the contract mandates strict adherence to Navy drawings, ISO 9001:2008 or AS9100 quality standards, and specific security protocols for handling Controlled Unclassified Information and classified data. Proposals must be submitted electronically via the PIEE Solicitation Module by February 1, 2027.

Ship Building and Repairing

POSTED

DEADLINE

Synthetic Signature Generation (SSG) Support Services

Solicitation # N0016726R1006

The Department of the Navy, Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting a single-award indefinite-delivery/indefinite-quantity (IDIQ) contract for scientific, engineering, and technical services to support Synthetic Signature Generation (SSG) based simulation systems. The scope includes the design, development, fabrication, integration, testing, fleet implementation, and maintenance of systems across five Navy fleet training categories: Submarine Team, Navigation, Surface, Surveillance, and On-Board. The contractor will operate within an Integrated Product Team (IPT) to provide technical engineering support to onsite maintenance personnel and support tactical testing and analysis for common simulation subsystems. The contract is structured with Cost-Plus-Fixed-Fee (CPFF) Level of Effort (LOE) CLINs and Cost Only Other Direct Costs (ODC) CLINs, with a total estimated labor requirement of 455,040 hours over a three-year period from August 10, 2027, to August 10, 2030. The procurement is a full-and-open competition evaluated on a best-value basis, prioritizing technical approach, management, and personnel over past performance and cost. Key requirements include a Top Secret facility clearance and Secret safeguarding for personnel, with specific Cyberspace Workforce (CWF) certifications aligned with DoDM 8570.01. Performance will be monitored via a Quality Assurance Surveillance Plan (QASP) using a rating scale from Exceptional to Unsatisfactory. Proposals must be submitted by November 9, 2026, and include detailed staffing plans and past performance narratives. The government has established a small business participation goal of 17 percent and requires the use of Wide Area Workflow (WAWF) for invoicing, with a 15 percent fixed fee withholding policy until a threshold of 100,000 dollars is reached.

Engineering Services

POSTED

DEADLINE

Supply of Raw Material for Tailcone StudsThis subcontract involves the supply of raw material for tailcone studs to support prime contractors on projects for the Naval Surface Warfare Center, Carderock Division. The scope of work requires the sourcing of high-grade alloys or specialty steels that strictly adhere to the specifications outlined in Drawing Ref2.1-(DISTR D)808-T01-07-260807. The supplier is responsible for delivering certified raw material stock to the fabricator, accompanied by necessary material mill test reports and certifications of compliance. Managed by the Department of Defense, this opportunity is designated as a total Small Business Set Aside under NAICS code 423440. The place of performance is located in Bethesda, Maryland. Interested parties must note the response deadline of November 5, 2026, to be considered for this procurement.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 14 hours

Manufacture of Tailcone (TC) StudsThis small business set-aside subcontract with the Naval Surface Warfare Center, Carderock Division, involves the precision machining and fabrication of 96 Tailcone Studs. The contractor is responsible for procuring raw materials and utilizing CNC machining centers and precision inspection tools to manufacture 8 shipsets of 12 certified studs, ensuring all parts adhere to the dimensions specified in Drawing Ref2.1-(DISTR D)808-T01-07-260807. Key requirements for the project include strict CMMC compliance and the delivery of a Technical Report for the TC Studs as part of CDRL A001. The work will be performed in Bethesda, Maryland, under NAICS code 332710, supporting prime contractors on Department of Defense projects.

POSTED

DEADLINE

in about 14 hours

Solicitation # N0016727Q0001

The Naval Surface Warfare Center Carderock Division is seeking a small business contractor under NAICS code 336611 to manufacture and deliver 96 tailcone studs, organized as eight shipsets of 12 studs each. This firm fixed price contract requires the contractor to provide all labor, equipment, and materials to produce the hardware in accordance with specific technical drawings and ASME B1.3 System 21 thread acceptability standards. The contractor must maintain a quality system meeting ISO 9001:2015 or later and ensure all material certifications comply with DFARS specialty metals restrictions. Deliverables include the hardware, a digital final certification technical report, and certificates of conformance. The period of performance is three months from the date of award, with final delivery to West Bethesda, Maryland. Packaging requirements are stringent, requiring each shipset to be individually packaged with a hardcopy certification package and then consolidated into a single watertight, heavy-duty hard plastic container. Marking must adhere to MIL-STD-130 and MIL-STD-129, utilizing two-dimensional data matrix symbology for unique identification. Award will be granted to the responsible quoter with a technically acceptable quote deemed most advantageous based on price and past performance. The contract also mandates strict cybersecurity compliance, including CMMC requirements and the safeguarding of covered defense information.

Ship Building and Repairing

POSTED

DEADLINE

in about 14 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

29--HOUSING ASSEMBLY,GE

Solicitation # SPE4A714T9910

POSTED

over 12 years ago

CLOSED

over 12 years ago

28--GUIDE,AIR SWIRL,FUE

Solicitation # SPE4A514T8322

POSTED

over 12 years ago

CLOSED

over 12 years ago

29--HOUSING,MOTOR

Solicitation # SPE4A514T1984

POSTED

over 12 years ago

CLOSED

over 12 years ago

29--ROTOR GEAR AND PIN

Solicitation # SPE4A514R0270

POSTED

over 12 years ago

CLOSED

over 12 years ago

28--NOZZLE,AUGMENTER EX, 2840014559504, 1C

Solicitation # SPRTA1-13-R-0421-0002

POSTED

over 12 years ago

CLOSED

almost 57 years ago

16--Aircraft Components and Accessories

Solicitation # SPRTA1-14-R-0057

POSTED

over 12 years ago

CLOSED

over 12 years ago

29--PARTS KIT,FUEL FLOW

Solicitation # SPE4A514TB755

POSTED

over 12 years ago

CLOSED

over 12 years ago

29--ADAPTER,AUGMENTOR,P

Solicitation # SPE4A514T7364

POSTED

over 12 years ago

CLOSED

over 12 years ago

29--CABLE ASSEMBLY,CONT

Solicitation # SPE4A714T8109

POSTED

over 12 years ago

CLOSED

over 12 years ago

29--VALVE ASSEMBLY

Solicitation # SPE4A714T7760

POSTED

over 12 years ago

CLOSED

over 12 years ago

29--FILTER,FLUID

Solicitation # SPE4A514TG254

POSTED

over 12 years ago

CLOSED

over 12 years ago

28--Engines, Turbines, and Components

Solicitation # SPRTA1-13-R-0504

POSTED

over 12 years ago

CLOSED

over 12 years ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS