Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

DISC BRAKES AND FLOOR STAND

Active

DON-SNOTE-040217-001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Supervisor of Shipbuilding Conversion and Repair in Newport News, Virginia, plans to award a sole source purchase order to Industrial Supply Corp., located in Chesapeake, Virginia, for the procurement of Stearns disc brakes and floor stands. This acquisition will be conducted under simplified acquisition procedures with an anticipated award date of February 17, 2004. The notice explicitly clarifies that it is not a solicitation or request for quotation, and no solicitation documents are available; correspondences such as phone calls, faxes, or emails requesting information or quotations will not be entertained. This procurement is issued by the Department of Defense office responsible for supply related to shipbuilding conversion and repair. The contract involves the purchase of specific equipment needed for shipbuilding activities, and the award is set to be sole sourced, meaning no competitive bidding will take place. The place of performance and detailed NAICS codes are not specified, and there is no set-aside status indicated for this contract.

General Info

Sole source purchase order to Industrial Supply Corp. for shipbuilding brake equipment, awarded February 2004.

Agency

Department Of Defense → Supply Of Shipbuilding Conv And Repair

NAICS

336611 - Ship Building and Repairing

Place of Performance

VA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedFeb 17

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Supply Of Shipbuilding Conv And Repair

ContactsNo contacts available

OfficeNEWPORT NEWS, VA, 23607-2787, USA

Organization / AgencyDepartment Of Defense → Supply Of Shipbuilding Conv And Repair

Office AddressNEWPORT NEWS, VA, 23607-2787, USA

ContactsNo contact information available

Full Description

Show more

THE SUPERVISOR OF SHIPBUILDING CONVERSION AND REPAIR NEWPORT NEWS VIRGINIA, INTENDS TO AWARD A SOLE SOURCE PURCHASE ORDER/CONTRACT TO INDUSTRIAL SUPPLY CORP., 520 WOODLAKE CIRCLE, SUITE B, CHESAPEAKE, VA. 23320, FOR STEARNS DISC BRAKES AND FLOOR STANDS. THIS PURCHASE IS TO BE UNDER SIMPLIFIED ACQUISITION PROCEDURES. THE AWARD DATE IS ANTICIPATED TO BE FEBRUARY 17, 2004.. THIS NOTICE IS NOT A REQUEST FOR QUOTATION. NO SOLICITATION DOCUMENT IS AVAILABLE AND TELEPHONE OR FAX OR E-MAIL REQUESTS WILL NOT BE HONORED. NO CONTRACT WILL BE AWARDED ON THE BASIS OF OFFERS RECEIVED IN RESPONSE TO THIS NOTICE.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7L1-27-T-1746

Solicitation SPE7L1-27-T-1746 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 37 angle valves, identified by NSN 4820002789870. This is a restricted source item designated for critical application, requiring engineering source approval by the Government Design Control Activity. The procurement references Milwaukee Valve Company part numbers 1023-001H-1 1/2 and 1023-001J-1 1/2. Delivery is required within 152 days, with the destination for both inspection and acceptance being the Distribution Depot Puget Sound in Bremerton, Washington. The contract mandates strict adherence to quality and environmental standards, including the prohibition of Class I ozone depleting chemicals and specific restrictions on mercury and mercury-containing compounds per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material preferences, and the prohibition of covered defense telecommunications equipment. The acquisition falls under NAICS code 336611.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

CYLINDER, HYDRAULIC ACC

Solicitation # SPE7M0-27-T-0456

This fixed-price solicitation, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is for the procurement of one hydraulic accumulator cylinder (NSN 2090-01-450-1199). The item is to be delivered to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with an original required delivery date of September 28, 2026. The procurement requires adherence to Technical Data Package Rev A Gen 2 and Basic Drawing NR 53711 6405530 Revision E. Delivery must be made via the fastest traceable means, and the contract specifies destination inspection and acceptance under FAR 52.246-2. The contract mandates strict compliance with several technical and regulatory standards, including MIL-STD-129 for marking, MIL-STD-130 for Item Unique Identification (IUID), and RP001 for DLA packaging requirements. There are significant restrictions on the use of mercury and a requirement for the safeguarding of covered defense information per DFARS 252.204-7012. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and specific DLA authorizations. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

CONSOL Station Design and InstallationThis subcontract, titled CONSOL Station Design and Installation, involves the engineering and installation of two CONSOL stations for prime contractors on Military Sealift Command tanker projects. The scope of work requires the integration of these stations into existing vessel manifold and piping systems to facilitate ship-to-ship petroleum transfers at sea. All work must be performed in accordance with USCG and classification society standards to ensure the delivery of two fully operational and certified stations. Managed by the Department of Defense through Mschq Norfolk under NAICS code 336611, the project was posted on October 30, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

POSTED

about 13 hours ago

DEADLINE

Marine Fender Installation & Hull WorkThis small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard, involves the removal and installation of rubber fender systems on a 108 foot Yard Patrol Craft in Curtis Bay. The scope of work requires the removal of existing upper and lower fendering and securing bars, followed by the installation of 24 Type-D black EPDM fenders using new studs, nuts, and washers. The contractor is responsible for conducting visual, probe, and hammer test inspections of the oak shims and mounting plates to ensure structural integrity. The final deliverable is a fully installed and secured rubber fender system across the hull and transom. Responses for this opportunity are due by November 16, 2026.

POSTED

about 13 hours ago

DEADLINE

NONSKID FOR NAVAL SHIPS/VESSELS

Solicitation # N4002727R0004

Solicitation N4002727R0004 is a total small business set-aside for a single Indefinite Delivery, Indefinite Quantity (IDIQ) firm fixed price contract to provide nonskid deck covering removal and replacement for U.S. Navy ships and other government vessels. The work will be performed at Naval Station Mayport, Florida, and within 50 miles of the facility. The contract spans five ordering periods from March 15, 2027, through March 14, 2032. The scope includes surface preparation meeting SSPC-SP10/NACE 2, SSPC-SP 11, and SSPC-SP12 WJ-3/NACE 5 standards, with the application of MIL-PRF-24667 Type I, IV, V, or XI nonskid materials. Award will be based on a competitive trade-off source selection process evaluating best value, with a heavy emphasis on past performance involving U.S. Navy surface combatants and price fairness. The contractor must adhere to ASQ/ANSI/ISO 9001:2015 quality standards and utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing. Key requirements include the submission of an Access Control Plan for non-U.S. citizen employees and compliance with CMMC cybersecurity levels and Buy American regulations. Liquidated damages are tailored at two percent per calendar day, capped at ten percent. Proposals are due by November 30, 2026, and must be submitted in three volumes covering price, past performance, and pre-award information.

Southeast Regional Maintenance Center

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Dry-Dock: USCG ANT PUGET SOUND (55107) FY27 DD

Solicitation # 70Z04026QSBPL0015

Solicitation 70Z04026QSBPL0015 is a request for a firm-fixed-price contract for the FY27 dry-docking repairs and alterations of the USCG STA Puget Sound (55107). The project is 100% set aside for Women-Owned Small Businesses (WOSB) and is managed by the USCG Surface Forces Logistics Center in Norfolk, Virginia. The period of performance is scheduled from February 16, 2027, to July 16, 2027. The scope of work includes 40 technical work items such as hull plating inspection, ultrasonic testing, general welding, main diesel engine alignment, valve renewal, and comprehensive preservation and painting of ship structures in accordance with SFLC Standard Specifications. Award will be based on the Lowest Price Technically Acceptable (LPTA) approach, evaluating technical capability, total evaluated price, and past performance from the last two years via CPARS. Offerors must be registered with the Joint Certification Program (JCP) to access necessary vessel drawings and must provide extensive documentation, including welding certifications, proof of insurance, and AMPP or NACE certifications. Payment will be processed electronically through the Invoice Processing Platform, with 10% of the total contract price withheld until all deliverables are accepted. Quotes are due by November 5, 2026, and must remain valid for 190 days.

POSTED

about 13 hours ago

DEADLINE

CGC KUKUI DRYDOCK

Solicitation # 70ZU0227QIBCT0001

Solicitation 70ZU0227QIBCT0001 is an Indefinite Delivery Requirement Contract (IDR) for the FY27 drydock availability of the USCGC KUKUI (WLB 203), a 225-foot Buoy Tender homeported in Sitka, Alaska. The project involves comprehensive drydock repairs, including extensive preservation of the hull, exterior decks, superstructure, ballast and potable water tanks, and various internal mechanical components. Performance will take place at the contractor's facility from February 2, 2027, to May 18, 2027, with an anticipated award date of January 18, 2027. This requirement is a total small business set-aside under NAICS code 336611, with a size standard of 1,300 employees. The award will be granted to the responsible quoter providing the most advantageous quote, based on a lowest-price technically acceptable basis. Evaluation factors include a pass/fail assessment of technical capability and past performance within the last three years. Contractors must provide a comprehensive execution plan for lodging and messing, facility certifications, and docking calculations in accordance with SFLC Standard Specifications 0740 and 8634. Quotes must be submitted via email by November 23, 2026, and must include a detailed technical proposal separate from the pricing sheet. Order limitations are set with a minimum order of 1,000 dollars and a maximum combination order of 7 million dollars.

POSTED

about 13 hours ago

DEADLINE

NAVY NP FENDER RENEWAL

Solicitation # 70Z04027Q60514Y00

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order to perform a rubber fender system renewal on a 108-foot Yard Patrol Craft. The scope of work includes the removal of existing upper and lower fendering, securing bars, and hardware from the exterior hull and transom, followed by the installation of new rubber fenders and associated hardware. Specific requirements include replacing up to 60 linear feet of CRES securing flat bars and 75 linear feet of mounting plates and oak shims, as well as installing new studs, nuts, and washers. The government will provide 24 Type-D black EPDM fenders as government furnished material located at the Coast Guard Yard in Curtis Bay, Maryland, which also serves as the place of performance. This is a total small business set-aside conducted under FAR Part 13 Simplified Acquisition Procedures, with awards based on best value considering technical requirements, deadlines, and price. All work must be completed by December 11, 2026. Quotes must be submitted via email to Erica Gibbs by November 16, 2026, at 9:00 am Eastern. Payment will be processed via Net 30 terms through the IPP system, and no down or advanced payments will be provided. Vendors must be able to secure funding until delivery and may need to be registered in the Joint Certification Program to access export-controlled drawings.

POSTED

about 13 hours ago

DEADLINE

Voyage Repair (VR)

Solicitation # N6817127QN006

Solicitation N6817127QN006 is a Request for Quote issued by NAVSUP FLC Sigonella Naples Office for firm fixed price non-commercial voyage repair services for the USS RAFAEL PERALTA (DDG 115). The work is to be performed in Mombasa, Kenya, with a period of performance from November 12, 2026, to November 18, 2026. The scope of work includes hull maintenance such as high-pressure fresh water washing, cleaning and inspection of air conditioning and refrigeration plant condensers, rust and corrosion removal, replacement of lagging and insulation, furniture upholstery replacement, and the provision of rigging services and scaffolding. All work must adhere to NAVSEA Standard Items and SCF Part 1915 Occupational Safety and Health Standards for Shipyard Employment. Award will be granted to the lowest priced technically acceptable offeror, with technical capabilities rated as either acceptable or unacceptable. Prospective contractors must submit a completed J-1 Price Breakdown in US dollars, a draft Test and Inspection Plan, and a signed Use and Non-Disclosure Agreement to access restricted technical data. Required submission documentation includes Standard Form 18, completed Standard Form 30 amendments, and technical qualifications verified via the Attachment J-3 checklist. The deadline for proposal submission is November 2, 2026, at 13:00 CET. Post-award invoicing must be processed electronically through Wide Area WorkFlow.

Navsup Flc Sigonella Naples Office

POSTED

about 13 hours ago

DEADLINE

CVN 75 RCOH Painting, Decking and Lagging

Solicitation # N61177-27-R-1000

POSTED

about 13 hours ago

DEADLINE

Full & Open Brand Name OEM "Curtiss-Wright Electro-Mechanical Corp" - Low Pressure Air Compressor (LPAC) Maintenance Services

Solicitation # N0040627Q0004

Fleet Logistics Center Puget Sound is soliciting a firm-fixed-price, full and open brand name requirement for Low Pressure Air Compressor (LPAC) maintenance services to support the USS SAN DIEGO (LPD-22) in Sasebo, Japan. The scope of work involves the replacement of the No.2 LPAC air end assembly for a Dresser-Rand Company Model GSS-200 rotary compressor, including all necessary labor and genuine OEM parts from Curtiss-Wright Electro-Mechanical Corp. The contractor is responsible for cleaning, inspection, and alignment of drive couplings and piping, with final acceptance contingent upon specific technical criteria, including a combined insulation resistance of 4 megaohms or higher and automatic loading at designated shipboard air pressures. The performance period is scheduled for 2026, with a final delivery deadline of November 23, 2026. Quotes will be evaluated based on technical capability, delivery date, past performance, and price, with a 10 percent price evaluation preference for HUBZone small businesses. Because this is a brand name requirement, offerors must provide OEM documentation ensuring parts and services are genuine, including manufacturer warranties and traceability. All invoicing must be processed through Wide Area WorkFlow (WAWF), and the contractor must comply with OSHA safety standards and strict packaging requirements per ASTM-D-3951 and various MIL-STD specifications.

Navsup Flt Logistics Ctr Puget Sound

POSTED

about 13 hours ago

DEADLINE

BAG, EDGING MACHINE,

Solicitation # SPE2DS-27-T-1156

Solicitation SPE2DS-27-T-1156 is a request for quotations for the procurement of one bag edging machine, identified by NSN 6540-01-416-2188, for the Department of Defense via DLA Troop Support. The item is to be delivered FOB Destination to the USS Carl Vinson CVN 70 with a required delivery lead time of 20 days and an original required delivery date of November 2, 2026. The acquisition is managed under NAICS code 336611 and is subject to destination inspection and acceptance. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring commercial packaging in sealed unit containers and marking according to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Technical compliance includes the DLA Master List of Technical and Quality Requirements and a prohibition on the intentional use of mercury. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → Supply Of Shipbuilding Conv And Repair

Same awarding agency

Sources Sought for: Jet Ejector NSN: 4320-00-256-8206

Solicitation # N6278627R0001

The Superintendent of Shipbuilding Bath Maine is conducting market research to identify qualified manufacturers, remanufacturers, or distributors capable of supplying three Jet Ejectors, identified by NSN 4320-00-256-8206 and part number 48S011. These water-operated fluid pumps must feature an aluminum body with plastic jet components, a maximum capacity of 18,000 gallons per hour, and specific NH threaded connections for the pressure inlet, suction inlet, and discharge outlet. Interested parties under NAICS 333914 must submit a capability statement including their CAGE code, UEI, and sourcing strategy. Submissions must confirm the ability to provide full traceability or a Certificate of Conformance, along with estimated lead times and rough order of magnitude pricing. This notice is for information gathering purposes only and does not constitute a formal solicitation or commitment to award a contract.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

10--PHALANX MK-15 CIWS LIFE CYCLE MAINTENANCE

Solicitation # N0002404R5460

POSTED

over 22 years ago

DEADLINE

19 -- VENTILATION DUCT RENEWAL

Solicitation # DTCG28-04-Q-3FS281

Base MIAMI(00028)

POSTED

over 22 years ago

CLOSED

over 22 years ago

J--Mid Term Availability ( MTA) for the USNS Pecos ( T-AO 197)

Solicitation # N62383-04-R-0001

Military Sealift Fleet Support Command

POSTED

over 22 years ago

CLOSED

almost 23 years ago

J -- General Ship repair for San Diego Area.

Solicitation # N62383-04-R-4000

Military Sealift Fleet Support Command

POSTED

over 22 years ago

CLOSED

over 22 years ago

J -- Dockside Repairs to USCGC Dauntless (WMEC-624)

Solicitation # DTCG80-04-Q-3FA542

Sflc Procurement Branch 1(00080)

POSTED

almost 23 years ago

CLOSED

almost 23 years ago

J--Manufacture, Overhaul, Repair of MK 45 5 Gun System, MK 75 76mm Gun System, and Minor Caliber Gun Mounts and Equipment; manufacture and engineering support for MK 32 Surface Vessel Torpedo Tubes

Solicitation # N0002404R4146

POSTED

almost 23 years ago

DEADLINE

J -- USCGC BRISTOL BAY 04 DRYDOCK AND REPAIR

Solicitation # Reference-Number-USCGCBRISTOLBAY04DD

Sflc Procurement Branch 1(00080)

POSTED

almost 23 years ago

DEADLINE

J -- Nakwasina and Chickamin Barge Hull Mtnc.

Solicitation # KTN-04-11

R10 Alaska Regional Office

POSTED

almost 23 years ago

DEADLINE

A--Construct a Follow-on SEALION Technology Demonstration Craft

Solicitation # N0016704C0021

POSTED

almost 23 years ago

CLOSED

almost 23 years ago

Solicitation # DON-SNOTE-031222-001

POSTED

almost 23 years ago

DEADLINE

Solicitation # DON-SNOTE-031203-001

Supply Of Shipbuilding Conv And Repair

POSTED

almost 23 years ago

DEADLINE

DRY-DOCKING OF NAVY SHIPS IN THE MAYPORT, FL AREA

Solicitation # DON-SNOTE-031125-004

POSTED

almost 23 years ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS