This Combined Synopsis/Solicitation opportunity was posted on June 27, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Dismantle and Disposal of Web Offset Press

Closed

2031ZA17Q00009Federal

Submission Closed06/29/2017, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation is soliciting bids for a fee-for-service contract to provide panic hardware services for electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The scope of work involves performing site surveys, procuring Grade I commercial-grade panic bars and associated hardware, and installing them at five locations, including the B-Cafeteria and Men's and Women's Dorms. All installations must comply with NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and ADA standards. Contractors are required to perform at least 10 consecutive cycle tests to ensure fail-safe operation, guaranteeing that doors remain securely latched from the outside but open immediately under simple pushing pressure from the inside. This is a small business set-aside opportunity under NAICS code 238290 with a size standard of 22 million dollars. Eligible bidders must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, three professional references, and an SBA certification letter if applicable by December 1, 2026. The contract is subject to various Federal Acquisition Regulations, including those regarding minimum wages under Executive Order 14026, paid sick leave under Executive Order 13706, and the Davis-Bacon Act. Awardees must provide proof of insurance and adhere to strict government and Department of Labor guidelines for protecting sensitive information and maintaining security requirements.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Kitchen Elevator Upgrade and Repair Service - NHSP-M

Solicitation # RFP NHDOC 2027-07

The New Hampshire Department of Corrections issued RFP NHDOC 2027-07 for kitchen elevator upgrade and repair services at the NH State Prison for Men. This firm fixed price or not-to-exceed contract requires a licensed professional to remove and install a new closed-loop door operator system, door tracks, hangers, and car and hatch doors on both floors. Additionally, the vendor must provide a new power unit comprising the motor, hydraulic valve, pump, oil reservoir, muffler, isolation assembly, and hydraulic fluid, along with four security key switches. All work must be completed by June 30, 2027, and includes a minimum one-year manufacturer warranty on parts and labor. The vendor is responsible for performing all required safety tests and submitting the results to the NH Department of Labor. Proposals are due by 2:00 PM EST on November 13, 2026, and will be evaluated based on a combined score of a technical proposal, weighted at 50 points, and a cost proposal. Technical evaluation focuses on the executive summary, organizational capability, and organizational approach. Awarded vendors must maintain comprehensive insurance, including commercial general liability of at least 1 million dollars per occurrence and 2 million dollars aggregate, and comply with strict correctional facility regulations, including PPD 371 and HIPAA. Payment is issued via monthly itemized invoices within 30 days of approval. All personnel must be NH State licensed, and all tools are subject to inventory inspection by facility staff.

Department Of Corrections

POSTED

DEADLINE

Custom Modular Equine Stall FabricatorThis subcontract agreement involves the fabrication and delivery of custom modular equine stall systems for prime contractors working on projects for the Commonwealth of Kentucky Department for Facilities and Support Services. The scope of work requires the production of stall frames using 14-gauge 2-inch square galvanized tubes with a powder-coated finish, paired with 1-inch diameter grillwork tubes spaced 3 inches on center and light gray HDPE panels. The selected fabricator is responsible for the complete manufacturing process and the delivery of all modular components directly to the designated project sites. This opportunity is categorized under NAICS code 238290 and is associated with the state of Kentucky, with a response deadline set for November 6, 2026.

Dept- Environmental Protection

POSTED

DEADLINE

Passenger Elevator ModernizationThis subcontract for Passenger Elevator Modernization involves the complete upgrade of hydraulic passenger elevator systems for prime contractors working on Texas Government facility projects for Tom Green County. The scope of work includes the installation of pre-engineered hydraulic elevators, car enclosures, hoistway entrances, signal equipment, and 4.5 inch diameter hydraulic jacks, as well as the integration of 25 HP hydraulic pumps and electronic card swipe systems to deliver a fully certified and operational system. Qualified bidders must hold a valid Texas state license and ensure all installations comply with ASME/ANSI A17.1, ADAAG, and NFPA 80 standards. The solicitation was posted on October 20, 2026, with a response deadline of December 9, 2026. This project falls under NAICS code 238290.

POSTED

DEADLINE

RFB 27-004 Keyes Building Passenger Elevator Upgrade

Solicitation # RFB 27-004

Tom Green County is soliciting competitive sealed bids for the upgrade of the passenger elevator located in the Edd B. and Frances Frink Keyes Building at 113 West Beauregard Avenue, San Angelo, Texas. The project requires a Texas-licensed vendor to provide all labor, tools, equipment, and materials necessary to perform the upgrades as specified in the project manual and drawings. The contract will be awarded to the lowest responsible bidder, with the selection process governed by Texas Government Code Chapter 2269. Bids must be submitted in sealed envelopes by 2:00 p.m. on December 9, 2026, and must include a signed original, a copy, a submission affidavit, and a completed Form 1295. The contract includes a project contingency allowance of 20,000 dollars and requires a performance bond for bids exceeding 100,000 dollars. Compliance with the Buy American Act, prevailing wage rates, and ADA requirements for jamb pads is mandatory. The vendor must adhere to strict federal and state regulations, including the Clean Air Act and Federal Water Pollution Control Act for contracts over 150,000 dollars, as well as Equal Employment Opportunity and domestic preference standards. Payment will be processed monthly via AIA G702 and G703 forms. Because the building remains occupied during construction, the contractor must implement comprehensive safety precautions and coordinate with the owner to minimize operational disruptions.

POSTED

DEADLINE

Seismic Safety UpgradesThe Seismic Safety Upgrades subcontract involves performing critical structural reinforcements for property owners who lease space to the California Department of General Services. The scope of work includes conducting detailed structural analyses and installing essential safety measures such as seismic braces, wall anchoring, and foundation reinforcement. All work must be executed using steel bracing and epoxy anchors in strict accordance with the California Building Code and State of California seismic safety specifications to ensure certified compliance. This opportunity is categorized under NAICS code 238290 and is managed by the state of California. Interested parties should note that the solicitation was posted on October 20, 2026, with a response deadline set for November 4, 2026. Further details and submission guidelines can be accessed through the Cal eProcure portal.

California Department of General Services

POSTED

DEADLINE

Material Lift Elevator Installation and IntegrationThis subcontract for the New Orleans Regional Transit Authority involves the installation and integration of material lift elevators. The selected contractor will be responsible for removing existing equipment and installing a new system with a 4,000 lb capacity, followed by comprehensive operational and final acceptance testing. The final deliverable is a fully operational material lift elevator accompanied by complete as-built documentation. To be eligible, contractors must possess a valid Louisiana Contractor’s License and provide a Buy America Certificate of Compliance. The project falls under NAICS code 238290, with a response deadline set for November 12, 2026.

New Orleans Regional Transit Authority

POSTED

DEADLINE

Material Lift Elevator Replacement

Solicitation # 2026-036

The New Orleans Regional Transit Authority is soliciting bids under IFB 2026-036 for the replacement of one material lift elevator. This is a fixed-price contract for a one-year term, requiring the contractor to provide all necessary labor, materials, and qualified technicians experienced in hydraulic material lift installation. The equipment is strictly for transporting materials and prohibits personnel from riding. Performance must adhere to specifications in IFB 2026-023 and comply with various federal and state regulations, including the Americans with Disabilities Act, OSHA, and building codes. The project is located at 8200 Willow St, New Orleans, LA, and requires a mandatory site visit for eligibility. Award will be granted to the lowest responsive and responsible bidder. To be considered responsive, bidders must submit a comprehensive package including the Louisiana Uniform Public Work Bid Form, Buy America Certificate of Compliance, non-collusion affidavits, and various debarment and lobbying certifications. The RTA emphasizes compliance with 49 CFR Part 26 regarding Disadvantaged Business Enterprises, noting that only LAUCP certified contractors are eligible if federal funds are utilized. Final acceptance is contingent upon successful operational testing and the submission of as-built documentation within seven days of delivery. Payments are processed 30 days from the date of invoice.

New Orleans Regional Transit Authority

POSTED

DEADLINE

NODC Roll-Up Counter Shutter Replacement

Solicitation # SRC0000042163

The Ohio Department of Developmental Disabilities is soliciting turnkey bids for the replacement of a roll-up counter shutter in the building 610 canteen at the Northwest Ohio Developmental Center in Toledo, Ohio. The project requires the removal and disposal of the existing shutter and the installation of one Wayne Dalton Rolling Counter Door, Model CFS-510. This specific model must be nonrated, clear anodized aluminum with flat slats for face of wall mounting, featuring right-side hand-crank manual operation and pad-lockable slide bolt locking on both ends. The contract is estimated to be effective from October 19, 2026, through June 30, 2027. Bidders must submit their quotes via the OhioBuys portal, including a completed item grid for parts and labor, a formal quote valid for at least 30 days, and required documentation such as the Contractor Information Form and the Standard Affirmation and Disclosure Form. Preference may be given to bidders who certify as Veteran Friendly Business Enterprises or meet Buy American and Buy Ohio criteria. Award will be granted to the lowest responsive and responsible bidder. Contractors must comply with Ohio Prevailing Wage Laws, OSHA safety standards, and strict conduct policies, including criminal background clearances and a zero-tolerance drug and alcohol policy for all personnel working on site.

Developmental Centers, Ddd207000 Northwest Ohio Dc Nwdc

POSTED

DEADLINE

Elevator Cab Interior ModernizationThis subcontract opportunity involves the interior modernization of three passenger elevators and one freight elevator at a Department of Veterans Affairs medical facility in Chicago, Illinois. The scope of work requires the removal of existing cab finishes and the installation of new walls, ceilings, flooring, and lighting, ensuring all upgrades are fully operational and compliant with ADA standards and project construction drawings. The project is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 238290. Interested parties must submit their responses by December 4, 2026, to the Network Contract Office 12.

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Elevator Control System Modernization SpecialistThis subcontract opportunity for the Department of Justice at FCC Yazoo City seeks an Elevator Control System Modernization Specialist to replace obsolete TKE TAC-20 controllers with non-proprietary microprocessor-based control systems featuring VFD technology. The scope of work involves field verification and the installation of communications equipment, selector systems, and hall and car fixtures. Final deliverables include fully operational systems, ride quality reports, and as-built diagrams. The project is designated as a total Small Business Set Aside under NAICS code 238290. Due to the nature of the facility, all performing technicians must be manufacturer-certified and obtain NCIC clearance. Interested parties must respond by November 6, 2026, for work to be performed in Yazoo City, Mississippi.

POSTED

DEADLINE

Elevator Procurement & InstallationThis subcontract involves the procurement and installation of traction-type passenger elevator systems for Navy Exchange Service Command facility projects located in Yokosuka, Japan. The scope of work includes procuring all necessary machinery, installing the traction systems, refurbishing elevator cabs, and completing all required testing and commissioning to deliver two fully operational elevators. The project requires the use of certified elevator installers who must strictly adhere to established safety codes and NEXCOM standards. This effort falls under NAICS code 238290 and is managed under the Department of Defense. Interested parties should note the response deadline of November 3, 2026.

Navy Exchange Service Command

POSTED

1 day ago

DEADLINE

in 13 days

AI Contract Overview

The Bureau of Engraving and Printing requires the dismantling and disposal of a thirty year old Web offset Press located in the Main Building to make room for new equipment. The scope of work includes the removal of the press along with all associated accessories, such as the pollution control device, control panels, ducting, wiring, and piping. Before work begins, the contractor must submit detailed rigging drawings for approval to ensure the safe removal of the machinery. The government is responsible for removing all sensitive components from the equipment prior to disposal. The contractor is tasked with disposing of the machinery for scrap value, and all proceeds generated from the scrap must be returned to the government. This project is managed under solicitation number 2031ZA17Q00009 and falls under NAICS code 238290.

General Info

Agency

N/A

Contract Value

$175,325

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

Bureau of Engraving 14th and C Streets, SW, WASHINGTON, DC, 20228, USA

Set-Aside

HZC

Awardee

Fortran Electric 2208 Race Street NEEDLES CA 92363 USA

Award Issued Date

09/15/2017, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

2 updates

PhaseClosed

PostedJun 5

Combined Synopsis

Notice updatedJun 21

The notice description changed.

Notice updatedJun 27

Response deadline changed from Jun 23, 2017 to Jun 29, 2017. The notice description changed.

Response DeadlineJun 29

Deadline has passed

Submission Closed

06/29/2017, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Joyce A. VaughnContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

The Bureau of Engraving and Printing (BEP), Office of Facility Support has a requirement to dismantle and dispose of a Web offset Press located in room 300M 3rd Floor, A-wing of the Main Building. The Web press is thirty years old and is no longer productive to BEP's production process. Therefore, BEP is removing the Web press to provide space for new equipment. Rigging drawing(s) must show the entire rigging system required to remove the Web press as stated in section 1.0 of the PWS and after the approval of the rigging plan(s) by BEP, the contractor will be authorized to execute the tasks stated in the PWS. The contractor shall dismantle and dispose of the Web Offset Press for scrap value. The Government will identify and remove any sensitive components/devices from the Web press before disposal. All proceeds from the scrap value shall be returned to the Government. The contractor shall dismantle and dispose of all parts and accessories associated with the Web Offset Press to include but no limited to: Web Offset Press, Pollution Control Device, control panels, ducting, wiring, piping and miscellaneous ancillary equipment. All proceeds from the scrap value shall be returned to the government.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS