Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Disposal of Decommissioned Netting

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562111
New
SLED
Hauling & Disposal Operations for Lea County Detention Center
Solicitation # 05 (26-27)
Lea County, New Mexico, is soliciting bids for hauling and disposal operations at the Lea County Detention Center, a 509-bed facility located in Lovington. The scope of work involves specialized hauling services, specifically the cleaning of one lift station equipped with two Muffin Monster Grinder Pumps. The contractor is responsible for removing approximately 30 to 40 55-gallon bags of trash, debris, and bulk materials per month and transporting them to a landfill for certified disposal. Services are typically performed at the end of each month or as needed, with a requirement for on-demand dynamic pulls where additional containers must be swapped within seven calendar days of notification. All operations must strictly adhere to state environmental quality frameworks and localized EPA guidelines. The contract is for an initial one-year term with options to renew for up to three additional years. Award will be granted to the lowest responsible bidder who meets all minimum specifications. Bids are due by November 6, 2026, at 3:00 pm local time and must be submitted via the designated portal with all required documentation, including a pricing proposal based on hourly hauling rates and per-disposal fees. Payment terms are Net-30 from the date of a monthly summary invoice. Contractors must comply with the Federal Civil Rights Act of 1964, the Americans with Disabilities Act, and state Workers Compensation laws. Required submittals include a campaign contribution disclosure, non-collusion affidavit, and certifications regarding debarment and New Mexico residency preferences.
Detention

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 562111
New
SLED
Solid waste management and recycling services for District Seven headquarters.
Solicitation # DOT-ITB-27-7003-EG
The Florida Department of Transportation has issued solicitation DOT-ITB-27-7003-EG for solid waste management and recycling services at the District Seven headquarters in Tampa, Florida. The contract is anticipated to run from January 1, 2027, through June 30, 2029, with a potential renewal for up to three additional years. The scope of work includes servicing one eight-yard waste container five days a week and providing recycling services for up to 52 blue 23-gallon receptacles, with internal collections occurring every Tuesday and Thursday. The vendor is also required to provide cleaning supplies and security cameras for monitoring dumpsters. Award is based on the lowest responsive and responsible bid. To be considered, vendors must demonstrate at least five uninterrupted years of experience in solid waste and recycling services and comply with several certifications, including E-Verify registration, Foreign Country of Concern Attestation, and certification regarding Scrutinized Companies. Based on bid tabulations opened on October 20, 2026, World One, Inc. is the intended awardee with a bid of $92,283.30, significantly lower than the competing bid from Emprise Partners, LLC. Payments are processed through the MyFloridaMarketPlace system and are subject to a one percent transaction fee and annual legislative appropriation.
Florida Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

The contract involves the removal, transportation, and environmentally compliant disposal of decommissioned UAV netting located at the ANT Center at Wright Patterson AFB, Ohio, with the requirement that all de-installation activities be conducted in accordance with applicable environmental regulations and accompanied by complete documentation to verify proper disposal. The work is classified as a subcontract under a Total Small Business Set-Aside as defined by the SBA, ensuring eligibility is restricted to small businesses as per FAR 19.5, and is governed by the NAICS code 562111 for hazardous and nonhazardous waste management. All activities must be completed in compliance with federal and military environmental standards, and documentation proving adherence to disposal protocols is mandatory. The solicitation was posted on July 23, 2026, with a response deadline of August 13, 2026, at 4:00 PM, and is managed by the Department of Defense through the FA8601 Aflcmc Pzio office. The place of performance is firmly established at Wright Patterson AFB with a zip code of 45433, and the contractor is responsible for coordinating logistics, labor, equipment, and regulatory compliance for the entire scope of work. The contract emphasizes secure and traceable handling of materials from de-installation through final disposal, requiring full accountability and adherence to defense and environmental protocols to ensure no noncompliance or ecological risk.

General Info

Remove and dispose of UAV netting at Wright-Patterson AFB per environmental regs, small business set-aside, waste management NAICS 562111.

NAICS

562111 - Solid Waste Collection

Place of Performance

Wright Patterson AFB, OH, 45433, USA

Set-Aside

SBA

Documents

This scope was carved out of FA860126Q0103.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

UAV Netting Enclosure For ANT Center

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Removal, transportation, and environmentally compliant disposal of existing UAV netting from the ANT Center, including de-installation and disposal documentation.

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 334516
New
Federal
High-Precision Wavemeter
Solicitation # FA860127Q0020
The United States Air Force, through the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base, Ohio, is conducting market research via a Sources Sought notice to identify capable providers for a High-Precision Wavemeter. The requirement is for the Air Force Institute of Technology to procure one High Finesse WS8-2 wavemeter equipped with a multi-channel switch and an absolute Rb reference source. The scope includes the delivery of all necessary hardware, firmware, software, installation, and operational training to support physics research. Technical specifications require a wavelength range of 390-1180 nm, a measurement resolution of 200 kHz, a measurement speed of 1 kHz, and the ability to measure up to eight channels simultaneously. Absolute accuracy must be ±10 MHz for the full range and ±2 MHz within ±2 nm of the reference source, with a calibration source wavelength of 780.24 nm. Interested parties must submit a capability package by November 12, 2026, including company identification, CAGE code, UEI, and socio-economic status under NAICS code 334516. Submissions must demonstrate past experience with similar projects, commercial sales history, and facility capabilities. A mandatory requirement for all offerors is CMMC Level 1 compliance, which must be self-certified in the Supplier Performance Risk System. While a set-aside decision has not yet been made, the government is considering a small business set-aside and requires detailed information on teaming arrangements and compliance with limitations on subcontracting. This notice is for market research purposes only and does not constitute a binding contract offer.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 334516
New
Federal
Intent to Sole Source: AFIT - High Finesse WS8-2 Wavemeter
Solicitation # FA860127Q0014
The United States Air Force, through AFLCMC/PZIBA, intends to award a firm fixed price sole source contract to Toptica Photonics Inc. for the acquisition of a High Finesse WS8-2 wavemeter, including an eight-channel switch and an absolute Rb reference source. This equipment is destined for the Air Force Institute of Technology at Wright Patterson AFB, Ohio, to support physics research in spectroscopy, laser engineering, non-linear optics, and radiometry. The procurement is classified under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing. Toptica Photonics Inc. was identified as the only responsible source capable of meeting the critical requirement for a wavelength measurement precision of less than 2 MHz, a specification that other available vendors cannot guarantee. The required system must feature a wavelength measurement range of 390-1180 nm, a measurement resolution of 200 kHz, and the ability to measure up to eight channels simultaneously. Technical specifications include a USB 2.0 interface, a measurement speed of 1 kHz, and a calibration source with an absolute accuracy of plus or minus 0.5 MHz. The award will include all necessary hardware, firmware, software, installation, and operational training. Interested parties may submit capability statements or exceptions to the sole source intent to Dametria Walder by November 6, 2026. Delivery to Wright Patterson AFB requires adherence to specific base access and commercial vehicle inspection protocols at Gate 16A.
Analytical Laboratory Instrument Manufacturing

POSTED

5 days ago

DEADLINE

in 9 days
View Details
NAICS: 238220
Federal
Repair Mechanical Systems IDIQ (FY 27-32)
Solicitation # FA860126R0016
Solicitation FA860126R0016 is a 100% small business set-aside Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the repair of mechanical systems at Wright-Patterson Air Force Base, Ohio. With a maximum contract ceiling of $98,795,000, the requirement covers an ordering period from February 26, 2027, to August 24, 2033, including a six-month option. The scope of work involves providing all labor, supervision, equipment, and materials for the repair, replacement, and upgrade of HVAC and plumbing systems, as well as incidental construction and design-build tasks. A specific seed project is included for the demolition of an air-cooled chiller and the replacement of a rooftop air handling unit at Building 20641. The government will utilize a Lowest Price Technically Acceptable (LPTA) source selection process, evaluating proposals based on a prior experience and self-performance compliance gate followed by a pass/fail assessment of the management approach and project planning and execution. Pricing is based on a coefficient model applied to RSMeans bare costs. Awardees must provide 100 percent performance and payment bonds and adhere to Davis-Bacon Act wage determinations for Greene and Montgomery Counties. All proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by November 12, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

7 days ago

DEADLINE

in 15 days
View Details
NAICS: 238210
Federal
Repair Electrical Systems
Solicitation # FA860126R0017
The United States Air Force, AFLCMC/Operational Contracting Branch, is soliciting proposals for an Indefinite Delivery Indefinite Quantity (IDIQ) contract to provide inspection, diagnostics, and renewal of low- and medium-voltage electrical systems at Wright-Patterson Air Force Base, Ohio. The scope of work includes the modernization or replacement of transformers, switchgear, panelboards, motor control centers, emergency generator assemblies, and fire alarm networks, as well as work on overhead and underground distribution systems and the integration of Direct Digital Controls for HVAC and building automation. The prime contractor is expected to manage approximately 25 concurrent projects and 50 projects annually, providing temporary power during outages and ensuring compliance with all current codes and Installation Facility Standards. This small business set-aside acquisition, under NAICS 238210, has an overall contract maximum of 97.9 million dollars. Award will be based on a Lowest Price Technically Acceptable (LPTA) process, requiring proposals to pass a compliance gate regarding US ownership and prior experience before technical and price evaluations. The contract utilizes a coefficient-based pricing model based on RS Means bare costs. Key requirements include a minimum blanket bond capacity of 5 million dollars, adherence to Davis-Bacon wage determinations for Montgomery and Greene Counties, and compliance with NIST SP 800-171 for protecting Controlled Unclassified Information. Proposals must be submitted electronically via the PIEE Solicitation Module.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

7 days ago

DEADLINE

in 15 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS