Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Distributed Wind Competitiveness Improvement Project

Active
PSN-2026031003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Distributed Wind Competitiveness Improvement Project, solicited under PSN-2026031003, is a presolicitation initiative by the Department of Energy through its contractor alliance aimed at advancing distributed wind energy technologies for 2026. NLR will make the request for proposal publicly available for at least 30 calendar days beginning on July 6, 2026, with responses due by August 5, 2026. The program will award firm fixed-price subcontracts through a competitive process to support innovation in distributed wind turbine and power electronics systems, with goals centered on increasing energy production, enhancing grid support, reducing costs, and achieving commercial readiness. Projects selected will focus on developing advanced manufacturing methods, conducting testing to meet national certification standards, and validating technology for market deployment. No set-aside is applied, and all eligible entities may apply. The opportunity is managed by the agency based in Golden, Colorado, with all performance expected to occur in the state of Colorado. Proposals must be submitted through the designated SAM.gov portal, and inquiries should be directed to Jessica Roe at ASP.Responses@nlr.gov.

General Info

DOE seeks competitive subcontracts for distributed wind tech innovation in Colorado, with proposals due August 5, 2026.

Agency

Department Of Energy → Llc - DOE Contractor Alliance For Energy InnovationView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

CO, 80007, USA

Set-Aside

NONE

Documents

(1)

PSN-2026031003 Distributed Wind Competitiveness Improvement Project Pre-Solicitation

PDFpresolicitation

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhasePresolicitation
Posted

Presolicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Llc - DOE Contractor Alliance For Energy Innovation
Contacts1 person available
OfficeGolden, CO, 80402, USA
Organization / Agency
Department Of Energy → Llc - DOE Contractor Alliance For Energy Innovation
View Agency Profile
Office AddressGolden, CO, 80402, USA
Contacts

Full Description

Show more

NLR intends to publicly publish for a minimum period of 30 calendar days a request for proposal (RFP) under the CIP to support continued innovation in distributed wind energy systems in 2026. Through CIP, NLR awards firm fixed-price subcontracts with price participation and technical assistance via a competitive process to: (1) innovate optimized distributed wind turbine and power electronics designs for increased energy production, grid support, and lower costs, (2) develop advanced manufacturing processes, (3) conduct testing for certification to national standards, and (4) commercialize and validate distributed wind technology.

Similar Contracts

Same NAICS industry code

NAICS: 541715
New
Federal
ATEC HQ 003 - AI Assurance & Autonomous System Validation
Solicitation # ATEC_RIW26_003
The Army Contracting Command - Aberdeen Proving Ground, on behalf of the Army Test and Evaluation Command, is seeking innovative solutions for AI Assurance and Autonomous System Validation under solicitation ATEC_RIW26_003. This Call for Solutions, issued under the Army Open Solicitation W9128Z-25-S-A002 and DFARS 212.70, aims to establish continuous Test, Evaluation, and Assurance pipelines to ensure AI-enabled capabilities are safe and reliable across flight safety, maneuver ground, and air defense directorates. The government requires an advanced multi-tiered testing framework and software validation suite for black-box machine learning models, autonomous navigation systems, and Aided Target Recognition software, including capabilities for real-time assurance, high-fidelity synthetic scenario generation, and automated data pipelines for disconnected range environments. The procurement process is divided into three phases: a Phase 1 Solution Brief, a Phase 2 Pitch, and a Phase 3 Solution Proposal. The deadline for Phase 1 submissions is August 19, 2026, at 1500 EDT. Submissions will be evaluated based on technical merit, schedule, and company viability, with the government reserving the right to select any number of solutions. Eligible offerors must be registered in SAM with a Unique Entity ID and CAGE code, and must provide an Organizational Conflicts of Interest analysis and a total estimated out-the-door price. All submissions must identify any associated intellectual property restrictions and be valid for 180 calendar days. Performance will take place at Aberdeen Proving Ground, Maryland, and invoicing must be processed through the Wide Area Workflow system.
W6QK Acc-Apg

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541715
New
Federal
ATEC HQ 004 - Remote Munition Accuracy Scoring Modernization
Solicitation # ATEC_RIW26_004
The Army Contracting Command-Aberdeen Proving Ground, on behalf of the Army Test and Evaluation Command, is seeking innovative solutions for Remote Munition Accuracy Scoring Modernization under solicitation ATEC_RIW26_004. The objective is to develop a remotely controlled, drone-based optical observation system utilizing both tethered and un-tethered platforms equipped with standard, high-speed, or infrared optics. This system must leverage geodetically surveyed ground markers to geo-register imagery and accurately score munition impacts within restricted surface danger zones, all managed through a user-friendly graphical interface and flight control system. This Call for Solutions is issued under the Defense Commercial Solutions Opening authority and follows a three-phase process: a Phase 1 Solution Brief, a Phase 2 Pitch, and a Phase 3 Solution Proposal. Phase 1 submissions are due by August 19, 2026, at 1500 EDT and must adhere to strict formatting guidelines, including a six-page limit or a fifteen-slide presentation. Evaluation is based on technical merit, schedule, and viability, listed in descending order of importance. Eligible offerors must be registered in the System for Award Management with a Unique Entity ID and CAGE code, and they must disclose any organizational conflicts of interest. Performance will take place at Aberdeen Proving Ground, Maryland, and any resulting contracts will require registration in the Wide Area Workflow for invoicing.
W6QK Acc-Apg

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541715
New
Federal
ATEC HQ 002 - Wide-Field Optical Data Fusion Modernization
Solicitation # ATEC_RIW26_002
The Army Contracting Command - Aberdeen Proving Ground, on behalf of the Army Test and Evaluation Command, is seeking innovative AI-driven software solutions for Wide-Field Optical Data Fusion Modernization under solicitation ATEC_RIW26_002. The objective is to develop a platform capable of real-time auto-calibration of fixed camera systems to extract highly accurate azimuth and elevation angles for tracked objects. This system must fuse optical video with radar and telemetry data to create an enriched Time-Space-Position Information data stream. Key technical requirements include processing latency of less than 0.05 seconds, accuracy within 0.1 degree of surveyed ground truth, and the ability to operate on government-furnished equipment at Controlled Unclassified Information levels and higher while complying with Army cybersecurity standards. This Call for Solutions is issued under the Defense Commercial Solutions Opening authority and follows a phased evaluation process. Phase 1 requires the submission of a Solution Brief by August 19, 2026, which will be evaluated based on technical merit, proposed schedule, and company viability. Applicants must provide a total estimated out-the-door price and a detailed Organizational Conflict of Interest analysis. Successful respondents may be invited to the ATEC Reverse Industry Week in September 2026 at Aberdeen Proving Ground, Maryland. All submissions must be sent to the designated contracting points of contact, Whitney Jackson and Dennis Beauclair, Jr., and must include necessary SAM.gov registration details such as the UEI and CAGE codes.
W6QK Acc-Apg

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541715
New
Federal
Amendment #9: Common Very Low Frequency Receiver (VLF) Increment 2 (CVRi2) Modernization
Solicitation # FA8735-26-R-B001
The Common Very Low Frequency Receiver Increment 2 (CVRi2) Modernization solicitation, under FA8735-26-R-B001, seeks proposals from AFLCMC/XA IDIQ Category 2 awardees to develop a unified, advanced VLF receiver system capable of modernizing legacy airborne and ground-based NC3 infrastructure with Crypto Modernization-2 compliance, NSA certification, and Open Mission Systems compatibility. The goal is to deliver a production-ready, secure beyond-line-of-sight communication capability for Emergency Action Messages across all conflict levels. The proposal submission deadline is firmly set for 5 August 2026 at Noon Eastern, following a series of amendments that updated technical sections, incorporated industry Q&As, revised the Statement of Work to include MIL-STD corrections, added contract clause RFO 52.222-90, and made unclassified Bidder’s Library documents available for download. Only firms certified under the Joint Certification Program may access Controlled Unclassified Information within the solicitation package, and all offerors must provide their CAGE Code and locations for handling classified data by 20 April 2026. The Government reserves the right to cancel the solicitation at any time without obligation and will award one or two Delivery Orders based on best value and funding availability under RFO 16.507, bypassing traditional DoD source selection procedures.
FA8735 Nuclear Ntw Division Afnwc Pzhn

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541715
New
International
Validation of the recommended distances and assessment of emergency response guidance for boiling liquid expanding vapour explosion (BLEVE) behaviour in the Emergency Response Guidebook (ERG) using updated modelling techniques
Solicitation # T8080-260061
Transport Canada’s Transportation of Dangerous Goods Program is seeking a contractor to validate and modernize the emergency response distances for boiling liquid expanding vapor explosions (BLEVEs) involving propane and other liquefied petroleum gases (LPG) as outlined in the Emergency Response Guidebook (ERG). The ERG, jointly developed by Transport Canada, the U.S. Department of Transportation, and Mexico’s infrastructure and transport secretariat, provides critical guidance to first responders during hazardous materials incidents, with the BLEVE table serving as a key reference for protective action distances. The current distances, based on 1995 modeling from limited physical testing, have been found inadequate in real-world BLEVE events, prompting this initiative to incorporate state-of-the-art data-driven techniques, including machine learning and advanced physics-based simulations, to improve predictive accuracy. The contractor must conduct a comprehensive review of existing BLEVE hazard models covering fireball, thermal radiation, blast overpressure, and projectile risks, develop a detailed data dictionary and management strategy, and then build and validate an open-source predictive model in Python using historical incident and test data. This model must output protective action distances compatible with ERG decision-making and be rigorously compared against current guidance to assess performance improvements and readiness for operational adoption. The contract, solicited under number T8080-260061 with a response deadline of August 17, 2026, has an initial term ending March 19, 2027, and is evaluated on a trade-off basis where technical merit accounts for 70% and price for 30%. Technical qualification is strictly gated by mandatory requirements including a project team with a qualified project manager, expertise in Python-based predictive modeling, experience in emergency response management, and specialized knowledge of pressure-liquefied gas containment standards in North America. Proposals are assessed on modeling experience using Python (50 points), data availability and methodology (30 points), work plan quality (30 points), and ERG-specific experience (10 points). Contractors must deliver a final report, monthly progress updates, and all model code publicly, with Canada retaining full intellectual property rights. The contract includes strict compliance clauses covering confidentiality, audit rights, insurance, anti-forced labor, international sanctions, and a prohibition on contingency fees. The work will be performed remotely by the contractor, with no specified physical delivery location, and all deliverables must be in English. The contractor must also demonstrate compliance with Canada’s procurement code of conduct and the Federal Contractors
Department of Transport

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Energy → Llc - DOE Contractor Alliance For Energy Innovation

Same awarding agency

NAICS: 333248
Federal
Automated Fiber Pulling & Winding SystemThe contract is for the supply of an advanced automated fiber pulling and winding system designed specifically for the production of hollow fibers, with operational speed requirements between 2 and 35 meters per minute and stringent demands for tension and alignment precision. The system must ensure consistent quality and dimensional accuracy throughout the fiber manufacturing process, enabling high-efficiency output suitable for energy innovation applications. The equipment will be delivered to a performance location in Golden, Colorado, with a zip code of 80401, and is scoped under NAICS code 333248, which classifies it within the industrial machinery manufacturing sector. This is a subcontract opportunity posted by the Department of Energy through its LLC - DOE Contractor Alliance for Energy Innovation, with responses due by August 27, 2026. While no set-aside provisions or specific organizational requirements are indicated, the procurement is targeted at suppliers capable of delivering highly engineered, precision automation systems tailored to advanced material manufacturing. The contract emphasizes technical performance over commercial procurement, requiring deep expertise in fiber optics, tension control mechanics, and synchronized industrial automation. Interested parties must submit proposals prior to the deadline through the official SAM.gov portal linked in the solicitation.
All Other Industrial Machinery Manufacturing

POSTED

7 days ago

DEADLINE

in 15 days
View Details