Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Diving Equipment Hardware Development

Active

Federal

Response Deadline11/30/2027, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with Navsea HQ focuses on the development and supply of specialized diving hardware and environmental protection gear for deep submergence projects. The scope involves designing and manufacturing equipment for deep diving and submarine rescue, with a specific emphasis on thermal stress mitigation gear for rescue casualties. Success in this contract requires advanced expertise in materials science for high-pressure environments and thermal insulation technology to deliver physical prototypes and detailed hardware specifications. The project is managed under the Department of Defense and is performed at the Washington Navy Yard. The solicitation was posted on September 23, 2026, with a response deadline of November 30, 2027. Classified under NAICS code 339999, the contract serves as a critical component of NAVSEA HQ's deep submergence operational capabilities.

General Info

Navsea HQ subcontract for deep submergence diving hardware and thermal protection gear development.

Agency

Department Of Defense → Navsea HqView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

Washington Navy Yard, DC, USA

Set-Aside

NONE

Documents

This scope was carved out of N0002427S0001.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BROAD AGENCY ANNOUNCEMENT - BIOMEDICAL RESEARCH AND DIVING EQUIPMENT DEVELOPMENT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2027, 08:00:00 PM UTCin about 1 year

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsea Hq

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsea Hq

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and develops specialized diving hardware and environmental protection gear for prime contractors on NAVSEA HQ deep submergence projects. Designs and manufactures equipment for deep diving and submarine rescue, including thermal stress mitigation gear for rescue casualties. Requires materials science for high-pressure environments and thermal insulation technology. Delivers physical prototypes and hardware specifications.

Similar Contracts

Same NAICS industry code

Surgical Instrument Labeling and EtchingThis subcontract opportunity is for the Department of Veterans Affairs Network Contracting Office 6, focusing on surgical instrument labeling and etching services. The selected provider will perform precision etching of tray names onto medical-grade stainless steel surgical instruments and containers, as well as the application of snap-on identification tags to container interiors. All work is to be completed using precision engraving equipment to ensure medical-grade standards are met. The project is based in Fredericksburg, Virginia, under NAICS code 339999. Interested parties must submit their responses by October 21, 2026, following the posting date of September 24, 2026. The primary objective is the delivery of accurately etched instruments and containers with properly installed identification tags for prime contractors.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 5 hours ago

DEADLINE

Gasket Component SupplyThis subcontract for Gasket Component Supply supports the Department of Defense under the Land Supplier Opns Vehicle Spt agency. The contractor is responsible for manufacturing or procuring 44 units of gaskets that meet Federal Supply Classifications 5330 and 5331, specifically adhering to the technical requirements of PR 7017984426. To ensure durability and safety, the components must be made from UV-resistant materials and comply with the Hazard Communication Standard 29 CFR 1910.1200. The project is categorized under NAICS code 339999 and will be performed in Cherry Point. The solicitation process includes a response deadline of October 5, 2026, with the primary objective of supplying these critical components to prime contractors for vehicle support operations.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Electrical Box Connectors (NSN 5975013088727)This subcontract involves the manufacture and procurement of electrical box connectors meeting NSN 5975013088727 specifications for the Department of Defense. The supplier is responsible for ensuring all items adhere to DLA Technical and Quality Requirements and comply with DLAD instructions and FAR 52.246-2 destination inspection standards. The contract is managed by the ASC Supplier Oper AE and AF Div with performance taking place at Fort Bragg. Logistics are handled via First Destination Transportation to ensure the physical delivery of connectors to the designated government destination. The opportunity was posted on September 23, 2026, with a response deadline of October 1, 2026, under NAICS code 339999.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Critical Application O-RingsThis subcontract involves the supply of 131 O-ring components for prime contractors delivering to DLA Aviation. The contractor is responsible for manufacturing or procuring items that meet Hamilton Sundstrand Corporation part number 69494R234 and national stock number 5331004106977 specifications. All units must be certified as Critical Application Items in accordance with the quality and inspection standards set by the ASC Supplier Oper OEM Division. The contract is managed by the Department of Defense under the ASC Supplier Oper OEM Division, with the place of performance located at Robins Air Force Base. The solicitation was posted on September 23, 2026, with a response deadline of October 1, 2026. The work falls under NAICS code 339999.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Identification Markers (NSN 7690-01-106-8096)This subcontract involves the supply of 46 identification markers under NSN 7690-01-106-8096 for the Department of Defense at the DDSP New Cumberland facility. The contractor is responsible for manufacturing or sourcing the markers according to Basic Drawing NR 19207 12296795 Revision B, ensuring all units maintain a 24-month shelf life. Compliance requirements include packaging per MIL-STD-2073-1E using tape and stiffeners, and marking in accordance with MIL-STD-129 and RP001. Additionally, the provider must supply hazard warning labels and MSDS documentation as required by 29 CFR 1910.1200. The opportunity is categorized under NAICS code 339999 with a response deadline of October 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services is issued by the Department of Defense Fluid Handling Division for performance in Jacksonville, Florida. The contractor is responsible for providing packaging, labeling, and marking services for prime contractors on DLA supply contracts, specifically delivering packaged and marked barrels that are ready for destination inspection. All operations must strictly adhere to ASTM D3951 for packaging materials and MIL-STD-129 for marking and labeling. The contractor must ensure full compliance with the DLA Master List of Technical and Quality Requirements using appropriate marking equipment and compliant materials. The solicitation was posted on September 23, 2026, with a response deadline of September 28, 2026, under NAICS code 339999.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supplier of Identification Markers (NSN 7690-00-260-7634)This subcontract with the Department of Defense, managed by DLA DIST SAN JOAQUIN, involves the manufacture or procurement of identification markers under NSN 7690-00-260-7634. The supplier is responsible for delivering 83 units of these markers to the government warehouse located in Tracy, California. All products must adhere to strict technical specifications and include Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313 for hazardous materials. The opportunity falls under NAICS code 339999 and was posted on September 23, 2026, with a response deadline of October 5, 2026. These markers are intended for prime contractors delivering DLA Troop Support supply contracts, ensuring proper identification and safety standards are met during the logistics process.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Preformed Packing Gasket Supply (NSN 5330012385872)This subcontract involves the manufacture or sourcing of 500 preformed packing gaskets identified by NSN 5330012385872 for the Department of Defense agency LAND SUPPLIER OPNS VEHICLE SPT. The contractor is responsible for ensuring all units are marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements. The final products must be delivered to the designated government location in Keyport, zip code 98345-7610, within 20 days of the order. This requirement falls under NAICS code 339999, with a response deadline set for October 5, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-01-469-2595)This subcontract involves the supply of nine nonmetallic hose assemblies, specifically NSN 4720-01-469-2595, for prime contractors working on DLA Land and Maritime fluid handling projects. The contractor is responsible for manufacturing or sourcing these assemblies using Eaton Aeroquip brand materials, ensuring all units are delivered to Robins Air Force Base. The project requires strict adherence to RA001 technical requirements, RP001 packaging standards, and RQ011 identification standards to ensure full compliance. Managed by the Department of Defense Fluid Handling Division under NAICS code 339999, the contract mandates that all delivered units be properly packaged and labeled according to the specified agency standards.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Gasket Supply (NSN 5330013521201)This subcontract opportunity with the Department of Defense, specifically the Land Supplier Opns Vehicle Spt, requires the supply of 210 gaskets meeting NSN 5330013521201 specifications. The contractor is responsible for manufacturing or sourcing the gaskets and ensuring they are packaged and sealed in medium duty, waterproof, greaseproof, opaque bags according to MIL-DTL-117, Type II, Class C, Style 1. All marking and packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 339999, with performance taking place in New Cumberland. Interested parties must submit their responses by October 5, 2026. The final deliverable consists of 210 individual gaskets, fully packaged and marked in accordance with the specified military requirements.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Gaskets (NSN 5330011820565)This subcontract with the Department of Defense for Land Supplier Opns Engines involves the production and supply of 573 gaskets conforming to NSN 5330011820565 specifications. The contractor is responsible for sourcing or manufacturing the items and ensuring all deliverables are palletized and marked according to MIL-STD-129, with packaging adhering to MIL-STD-2073-1E and RP001. The agreement requires strict compliance with RC001 for source approval and FAR 52.223-3 regarding the handling of hazardous materials. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 339999. The response deadline for this opportunity is October 5, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Retaining Straps (NSN 5340-01-714-4657)This subcontract involves the manufacture and supply of 29 specialized retaining straps matching NSN 5340-01-714-4657 for prime contractors supporting the Defense Logistics Agency under the Land Supply Chain of the Department of Defense. The contractor is responsible for sourcing or producing the hardware and ensuring all items are delivered to New Cumberland, Pennsylvania. Strict adherence to technical standards is required, including commercial packaging per ASTM D3951, labeling according to MIL-STD-129, and palletization per RP001. Additionally, the contractor must comply with FED-STD-313 and TQ IP025 for the handling of hazardous materials. The solicitation was posted on September 23, 2026, with a response deadline of October 5, 2026, under NAICS code 339999.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsea Hq

Same awarding agency

Submarine Escape & Rescue (SER) Specialized ConsultingThis subcontract with NAVSEA HQ focuses on providing specialized technical analysis and consulting for submarine escape and rescue operational scenarios. The contractor is responsible for assessing atmospheric conditions during disabled submarine events and developing critical procedures for the care of rescue casualties. These efforts support prime contractors on deep submergence projects and require deep expertise in SER protocols and naval operational environments. The project deliverables include the creation of operational procedure manuals and detailed atmospheric assessment reports. Performance will take place at the Washington Navy Yard under NAICS code 541690. The solicitation was posted on September 23, 2026, with a response deadline of November 30, 2027.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 1 year

Underwater Communications & Tracking SystemsThis subcontract with the Department of Defense Navsea HQ focuses on the development of electronic tools for underwater communication and diver tracking. The project requires the engineering of acoustic or electromagnetic communication systems and tracking solutions for divers and rescue assets, specifically for deep submergence projects. Key deliverables include communication prototypes and specialized tracking software and hardware. The work demands high-level expertise in underwater acoustics, signal processing, and the creation of ruggedized electronic housing. Performance for this contract is centered at the Washington Navy Yard, with a response deadline set for November 30, 2027. The project falls under NAICS code 334220.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

in about 1 year

Life Support Systems EngineeringThis subcontract for Life Support Systems Engineering supports NAVSEA HQ deep submergence projects through the design and supply of advanced breathing gas systems and atmospheric filtration technology. The scope of work focuses on developing and testing CO2 scrubbing technologies and enhancing breathing gas supply systems specifically for deep submergence and submarine escape scenarios. Key deliverables include the production of CO2 scrubber prototypes and specialized gas supply hardware. The project requires expertise in chemical engineering and high-pressure gas system design. Performance will take place at the Washington Navy Yard under the Department of Defense. The solicitation was posted on September 23, 2026, with a response deadline of November 30, 2027, falling under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

in about 1 year

Biomedical Research & Clinical TestingThis subcontract for Biomedical Research and Clinical Testing supports NAVSEA HQ deep submergence projects through applied biomedical RDT&E. The scope of work focuses on researching mitigations for narcosis and oxygen toxicity, developing decompression models to prevent decompression sickness, and conducting clinical studies regarding diver health. To execute these requirements, the provider must have access to animal care facilities and hyperbaric chambers. The project is managed under the Department of Defense and is based at the Washington Navy Yard. Key deliverables include validated decompression models, clinical data sets, and comprehensive research reports. The response deadline for this opportunity is November 30, 2027.

Research and Development in the Social Sciences and Humanities

POSTED

DEADLINE

in about 1 year

MIL-DTL-24624B, Valves, Quarter Turn, Butterfly, High Performance (Double-Offset) Wafer and Lug Style, Class 150, for Shipboard Use

Solicitation # N0002426SN-64

The Naval Sea Systems Command is developing draft specifications and standards for MIL-DTL-24624B, which covers high performance double-offset quarter turn butterfly valves in wafer and lug styles, class 150, for shipboard use. This initiative aims to support a diverse range of design solutions and encourage a broad vendor base. Interested parties can request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 19, 2026, and the final version will be available via ASSIST Online. This notice is for informational purposes regarding standards development and is not a solicitation for bids.

Industrial Valve Manufacturing

POSTED

DEADLINE

MIL-STD-769K w/ Change 2, Insulation Requirements for U.S. Naval Vessels

Solicitation # N0002426SN-66

The Naval Sea Systems Command is developing draft specifications for MIL-STD-769K w/ Change 2, which outlines insulation requirements for U.S. Naval Vessels. The objective of this effort is to establish standards that support a wide range of design solutions and processes while encouraging a diverse vendor base. Interested parties may request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 23, 2026, and the final version will be available via ASSIST Online. This notice is for informational purposes and does not constitute a solicitation.

Roofing, Siding, and Insulation Material Merchant Wholesalers

POSTED

DEADLINE

MIL-DTL-18110H, Valves, Gate-Type, Steel, Sizes 2½ to 16 Inches

Solicitation # N0002426SN-63

The Naval Sea Systems Command is developing draft specifications and standards for MIL-DTL-18110H, which covers steel gate-type valves ranging from 2.5 to 16 inches. This initiative aims to support a diverse range of design solutions and encourage a broad vendor base. Interested parties can request copies of the document by emailing CommandStandards@navy.mil with the document number. This action is a special notice and not a formal solicitation. The review period for the draft document concludes on October 19, 2026, and the final version will be available via ASSIST Online. The project is managed by Navsea HQ within the Department of Defense under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

Low Profile Mast and Rotational Module Component Prototype Other Transaction Area of Interest

Solicitation # N00024-26-R-6215

The Submarine Electromagnetic Systems Program Office (PMS 435) has issued a competitive Area of Interest (AOI) announcement under solicitation N00024-26-R-6215 to accelerate the design, development, and prototyping of a next-generation Low Profile Mast (LPM) Type 24 Mod 1 and Rotational Module (RM) component. These components are critical for providing all-weather infrared imaging and radio frequency processing for fleet submarines via the AN/BVY-1 Integrated Submarine Imaging System while minimizing radar and optical signatures. The Navy is utilizing the Other Transaction Authority pathway under 10 U.S.C. Section 4022 to award one or more prototype projects. The procurement follows a three-phase competitive process: Phase I involves the submission of White Papers and Placemats, Phase II consists of technical pitches, and Phase III requires a full Prototype Proposal. Eligible participants must be businesses owned in the United States, United Kingdom, or Australia, or enter into a teaming arrangement with such entities. Access to restricted Controlled Unclassified Information (CUI) and Secret-level Government Furnished Information requires a signed Terms of Use Agreement and compliance with ITAR and NISPOM security standards. Key deadlines include Q&A submissions by October 2, 2026, DoD SAFE link requests by October 13, 2026, and final Phase I submissions by October 20, 2026. Phase I submissions must include a five-page technical solution concept, cost estimates for a prototype and two pre-production units, and an Affirmation of Business Status Certification identifying the firm as either a Traditional or Non-Traditional Defense Contractor. Evaluation is based on technical solution concepts and maturity paths, with the final award determined by the results of the multi-phase evaluation.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

BROAD AGENCY ANNOUNCEMENT - BIOMEDICAL RESEARCH AND DIVING EQUIPMENT DEVELOPMENT

Solicitation # N0002427S0001

Naval Sea Systems Command (NAVSEA) is soliciting pre-proposals and full proposals through Broad Agency Announcement N00024-27-S-0001 for applied biomedical research and diving equipment development. The program focuses on enhancing diver health, safety, and performance, advancing deep diving capabilities, and optimizing submariner survivability during disabled submarine events. Key areas of interest include improving breathing gas supplies, human performance mitigations for oxygen toxicity and narcosis, environmental protection, decompression models, and the development of tools for underwater communication and tracking. Additionally, the program seeks innovations in submarine escape and rescue, specifically regarding atmospheric assessment, thermal stress mitigation, and the care of rescue casualties. The solicitation utilizes a two-phase selection process. For Fiscal Year 2028, pre-proposals are due by November 30, 2026, with full proposals due by March 30, 2027. For Fiscal Year 2029, pre-proposals are due by November 30, 2027, with full proposals due by March 30, 2028. While there is no mandatory budget ceiling, historical awards average around 300,000 dollars annually, and projects typically span two to three years. Submissions are evaluated based on innovation, scientific merit, relevance to Navy operations, affordability, and the likelihood of success. All offerors must be registered in the System for Award Management and comply with specific regulations regarding human and animal research if applicable.

Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

DEADLINE

in about 1 year

MIL-PRF-32307B, Valve, Quarter Turn, Triple-Offset, Torque Seated, for Shipboard use

Solicitation # N0002426SN-62

The Naval Sea Systems Command (NAVSEA) is developing draft specifications and standards for MIL-PRF-32307B, which covers quarter turn, triple-offset, torque seated valves for shipboard use. The objective is to establish standards that support a diverse range of design solutions and processes to encourage a broad vendor base. This action is a special notice and not a formal solicitation for contracts. Interested parties may request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 19, 2026, and the final version will be made available through ASSIST Online. The effort is managed by Navsea HQ in Washington Navy Yard, DC, under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

MIL-DTL-60680B, Thruster, Cartridge Actuated, M16 Remanufactured Metal Parts Assembly

Solicitation # N0002426SN-61

The Naval Sea Systems Command is developing draft specifications and standards for MIL-DTL-60680B, which pertains to the M16 Remanufactured Metal Parts Assembly for cartridge actuated thrusters. This initiative aims to support a diverse range of design solutions and processes while encouraging a broad vendor base. Interested parties can request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 19, 2026, and the final version will be available via ASSIST Online. This notice is for informational purposes and does not constitute a formal solicitation.

National Security

POSTED

DEADLINE

MIL-DTL-46559D, Initiator, Cartridge Actuated, M3A2, Metal Parts Assembly

Solicitation # N0002426SN-65

The Naval Sea Systems Command is developing draft specifications and standards for the MIL-DTL-46559D Initiator, Cartridge Actuated, M3A2, Metal Parts Assembly. This initiative aims to support a diverse range of design solutions and processes while encouraging a broad vendor base. Interested parties can request copies of the document by emailing CommandStandards@navy.mil with the specific document number. This notice is not a solicitation, but rather a call for review. The review period concludes on October 23, 2026, and the final document will be available via ASSIST Online. The action is managed by Navsea HQ under the Department of Defense, with the associated NAICS code 928110.

National Security

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS