Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Underwater Communications & Tracking Systems

Active

Federal

Response Deadline11/30/2027, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense Navsea HQ focuses on the development of electronic tools for underwater communication and diver tracking. The project requires the engineering of acoustic or electromagnetic communication systems and tracking solutions for divers and rescue assets, specifically for deep submergence projects. Key deliverables include communication prototypes and specialized tracking software and hardware. The work demands high-level expertise in underwater acoustics, signal processing, and the creation of ruggedized electronic housing. Performance for this contract is centered at the Washington Navy Yard, with a response deadline set for November 30, 2027. The project falls under NAICS code 334220.

General Info

DoD Navsea subcontract for underwater communication and diver tracking tools due November 2027.

Agency

Department Of Defense → Navsea HqView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

Washington Navy Yard, DC, USA

Set-Aside

NONE

Documents

This scope was carved out of N0002427S0001.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BROAD AGENCY ANNOUNCEMENT - BIOMEDICAL RESEARCH AND DIVING EQUIPMENT DEVELOPMENT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2027, 08:00:00 PM UTCin about 1 year

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsea Hq

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsea Hq

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develops electronic tools for underwater communication and diver tracking for prime contractors on NAVSEA HQ deep submergence projects. Engineers acoustic or electromagnetic communication systems and tracking systems for divers and rescue assets. Requires expertise in underwater acoustics, signal processing, and ruggedized electronic housing. Delivers communication prototypes and tracking software/hardware.

Similar Contracts

Same NAICS industry code

Solicitation # SPRMM126QGG29

This solicitation is for the manufacture and supply of Ballun Dipoles, awarded based on the Lowest Price Technically Acceptable criteria. The contract is a total small business set-aside and requires the use of Wide Area Workflow (WAWF) for the electronic submission of invoices and receiving reports. It specifies that the items must be physically identified according to MIL-STD-130 and packaged per MIL-STD 2073. Contractors must identify the Original Equipment Manufacturer and their CAGE code if they are not the manufacturer. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless it is a simple part number change. The government maintains the right to perform inspections to ensure compliance, and all inspection records must be kept for 365 days following final delivery. Performance at any facility other than the one named in the contract is prohibited without prior written approval and a corresponding administrative fee.

SPRMM1 DLA Mechanicsburg

POSTED

about 5 hours ago

DEADLINE

in about 1 month

59--COUPLER,ANTENNA

Solicitation # SPE7M526T531X

The Department of Defense, through DLA Land and Maritime, is seeking quotes for the procurement of ten antenna couplers, identified by NSN 5985015573109. The approved source for this item is 55635 FM20-374-2. Delivery is required to DLA Distribution San Joaquin within 168 days after the order is placed. This solicitation, numbered SPE7M526T531X, is an electronic RFQ under NAICS code 334220. All responsible sources may submit quotes electronically by the deadline of October 5, 2026. No hard copies of the solicitation or associated technical drawings and specifications are available.

DLA Land And Maritime

POSTED

about 5 hours ago

DEADLINE

59--ANTENNA SUBASSEMBLY

Solicitation # SPE7M526T532M

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of 88 antenna subassemblies under solicitation number SPE7M526T532M. The approved source for this requirement is 14304 12006-7402-01, and the items are to be delivered to DLA Distribution within 168 days after the order is received. This procurement falls under NAICS code 334220 and is managed by the office located in Columbus, Ohio. Interested and responsible sources must submit their quotes electronically by the deadline of October 5, 2026. The solicitation is available exclusively online, and no hard copies, specifications, plans, or drawings are provided. All inquiries regarding this request should be directed to the buyer via the DIBBS portal or the provided email contact.

DLA Land And Maritime

POSTED

about 5 hours ago

DEADLINE

TRIPLEXER/LNA FROM

Solicitation # SPRMM126QGF22

This solicitation, issued by DLA Mechanicsburg, is for the manufacture and procurement of a TRIPLEXER/LNA FROM, specifically identified by Cage Code 60188 and reference number 2099-173. The contract is a fixed-price agreement requiring adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. It emphasizes that only authorized distributors of the original manufacturer will be considered for award, and such distributors must provide proof of authorization on company letterhead. Key administrative requirements include the mandatory use of the Wide Area Workflow (WAWF) for electronic submission of invoices and receiving reports. The contractor is responsible for all inspection requirements, though the government reserves the right to perform its own inspections. Any changes in design or part numbers must be approved by the contracting officer via a specific coding system. The solicitation is managed under NAICS code 334220 and requires compliance with various Department of Defense security prohibitions and small business program representations.

SPRMM1 DLA Mechanicsburg

POSTED

about 5 hours ago

DEADLINE

RFP 26.001 - Broadcast Playout, Automation and Graphics Systems

Solicitation # 26.001

Knowledge Network Corporation is seeking a qualified broadcast systems integrator, consultant, or vendor to design, supply, deliver, install, and test a new Broadcast Playout, Automation, and Graphics system to replace an end-of-life system. The procurement process is divided into two phases: an initial evaluation of system requirements, price, and company background, followed by a no-cost, four-week hands-on proof of concept for shortlisted vendors to assess functionality and integration. Proposals must be submitted in English by 5:00 PM Pacific Time on November 20, 2026, via BC Bid, email, or hard copy. The selected contractor must be authorized to do business in Canada, maintain commercial general liability insurance of at least 2,000,000 CAD per occurrence, and adhere to strict data residency requirements ensuring all confidential digital files remain on servers located in Canada. Key evaluation weights include system requirements at 35%, price at 20%, and company background at 10%. The project timeline anticipates interviews in December 2026, proof of concept evaluations between March and May 2027, and a final proposal evaluation completion date of June 4, 2027.

Knowledge Network Corporation

POSTED

about 20 hours ago

DEADLINE

in about 2 months

AMI/AMR Communication Modules & InfrastructureThis subcontract for the City of O'Donnell in Texas focuses on the provision of electronic communication components for water system projects. The scope of work involves supplying prime contractors with radio frequency endpoints, collectors, and network gateways designed to transmit water usage data through AMI or AMR systems, along with the necessary communication modules and network hardware. The opportunity is categorized under NAICS code 334220 and was posted on September 23, 2026. Interested parties must submit their responses by the deadline of October 27, 2026. Further details regarding this procurement can be accessed through the Texas SmartBuy portal.

CITY OF O'DONNELL

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Supplier of Test Adapter (NSN 4940016432916)This subcontract involves the procurement of one Test Adapter, identified by NSN 4940016432916, to support prime contractors on projects for the Department of Defense Fluid Handling Division. The selected supplier is responsible for manufacturing or sourcing the adapter in strict accordance with the technical and quality standards defined in the DLA Master List of Technical and Quality Requirements (RA001). The opportunity is categorized under NAICS code 334220 and was posted on September 23, 2026, with a response deadline of October 5, 2026. The primary deliverable is a single physical Test Adapter that meets all specified compliance and quality mandates.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Radio Frequency Cable Assemblies (NSN 5995-01-187-4980)This subcontract involves the manufacture and supply of 26 Radio Frequency cable assemblies, specifically identified by NSN 5995-01-187-4980, for prime contractors supporting the Defense Logistics Agency. The provider must ensure all assemblies are produced using compliant RF materials and connectors, with all deliverables packaged according to the DLA Packaging Requirements for Procurement RP001. The contract is managed by the ASC Commodities Division of the Department of Defense under NAICS code 334220. Performance for this requirement is located in New Cumberland, Pennsylvania. The solicitation was posted on September 23, 2026, with a response deadline of October 1, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Radio Frequency Filter Supplier (NSN 5915-00-189-1323)This subcontract involves the sourcing and supply of 23 Radio Frequency Filters meeting NSN 5915-00-189-1323 specifications for prime contractors under DLA Land and Maritime supply contracts. The selected provider must ensure all units are packaged according to RP001 and marked in compliance with MIL-STD-129. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334220. The contract is issued by the Active Devices Division of the Department of Defense. A critical requirement for this engagement is a CMMC Level 2 Self-Assessment. Interested parties must respond by September 28, 2026, to provide the required quantity of packaged and marked RF filters.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Handset Hardware Supply (NSN 5965-01-593-6478)This subcontract under the Department of Defense Nuclear Reactor Program involves the supply of 65 handset units for prime contractors supporting DLA supply contracts. The hardware must meet the technical specifications for NSN 5965-01-593-6478 and adhere to packaging standards defined by MIL-STD-2073-1E and RP001 DLA Packaging Requirements for Procurement. The delivery of the 65 individual units is designated as FOB Origin for inspection and acceptance, with the place of performance located in New Cumberland. This procurement falls under NAICS code 334220 and was posted on September 23, 2026, with a response deadline of October 5, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Fixed Attenuators (NSN 5985017279337)This subcontract involves the supply of five fixed attenuators meeting the exact specifications of NSN 5985017279337 for the Department of Defense Active Devices Division. The provider is responsible for manufacturing or sourcing the units in strict adherence to the DLA Master List of Technical and Quality Requirements. Performance will take place in San Diego, California, with delivery terms set as FOB Origin under the First Destination Transportation program. The opportunity was posted on September 23, 2026, with a response deadline of October 5, 2026, falling under NAICS code 334220.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

DUMMY LOAD, ELECTRICAL

Solicitation # SPE7M5-26-T-521S

Solicitation SPE7M5-26-T-521S is a fixed-price request for quotation issued by the DLA Land and Maritime Active Devices Division for the procurement of six electrical dummy loads. The required items are identified by NSN 5985017356061 and part number PE6089A from Infinite Electronics International. The contract specifies a delivery period of 263 days, with a required delivery date and need ship date of June 26, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to rigorous technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Compliance with DLA packaging requirements (RP001) and the removal of government identification from non-accepted supplies (RQ011) is mandatory. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding of covered defense information, and the prohibition of hexavalent chromium. Quotations were due by October 5, 2026, and were encouraged to be submitted via the DIBBS portal.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsea Hq

Same awarding agency

Submarine Escape & Rescue (SER) Specialized ConsultingThis subcontract with NAVSEA HQ focuses on providing specialized technical analysis and consulting for submarine escape and rescue operational scenarios. The contractor is responsible for assessing atmospheric conditions during disabled submarine events and developing critical procedures for the care of rescue casualties. These efforts support prime contractors on deep submergence projects and require deep expertise in SER protocols and naval operational environments. The project deliverables include the creation of operational procedure manuals and detailed atmospheric assessment reports. Performance will take place at the Washington Navy Yard under NAICS code 541690. The solicitation was posted on September 23, 2026, with a response deadline of November 30, 2027.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 1 year

Diving Equipment Hardware DevelopmentThis subcontract with Navsea HQ focuses on the development and supply of specialized diving hardware and environmental protection gear for deep submergence projects. The scope involves designing and manufacturing equipment for deep diving and submarine rescue, with a specific emphasis on thermal stress mitigation gear for rescue casualties. Success in this contract requires advanced expertise in materials science for high-pressure environments and thermal insulation technology to deliver physical prototypes and detailed hardware specifications. The project is managed under the Department of Defense and is performed at the Washington Navy Yard. The solicitation was posted on September 23, 2026, with a response deadline of November 30, 2027. Classified under NAICS code 339999, the contract serves as a critical component of NAVSEA HQ's deep submergence operational capabilities.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

in about 1 year

Life Support Systems EngineeringThis subcontract for Life Support Systems Engineering supports NAVSEA HQ deep submergence projects through the design and supply of advanced breathing gas systems and atmospheric filtration technology. The scope of work focuses on developing and testing CO2 scrubbing technologies and enhancing breathing gas supply systems specifically for deep submergence and submarine escape scenarios. Key deliverables include the production of CO2 scrubber prototypes and specialized gas supply hardware. The project requires expertise in chemical engineering and high-pressure gas system design. Performance will take place at the Washington Navy Yard under the Department of Defense. The solicitation was posted on September 23, 2026, with a response deadline of November 30, 2027, falling under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

in about 1 year

Biomedical Research & Clinical TestingThis subcontract for Biomedical Research and Clinical Testing supports NAVSEA HQ deep submergence projects through applied biomedical RDT&E. The scope of work focuses on researching mitigations for narcosis and oxygen toxicity, developing decompression models to prevent decompression sickness, and conducting clinical studies regarding diver health. To execute these requirements, the provider must have access to animal care facilities and hyperbaric chambers. The project is managed under the Department of Defense and is based at the Washington Navy Yard. Key deliverables include validated decompression models, clinical data sets, and comprehensive research reports. The response deadline for this opportunity is November 30, 2027.

Research and Development in the Social Sciences and Humanities

POSTED

DEADLINE

in about 1 year

MIL-DTL-24624B, Valves, Quarter Turn, Butterfly, High Performance (Double-Offset) Wafer and Lug Style, Class 150, for Shipboard Use

Solicitation # N0002426SN-64

The Naval Sea Systems Command is developing draft specifications and standards for MIL-DTL-24624B, which covers high performance double-offset quarter turn butterfly valves in wafer and lug styles, class 150, for shipboard use. This initiative aims to support a diverse range of design solutions and encourage a broad vendor base. Interested parties can request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 19, 2026, and the final version will be available via ASSIST Online. This notice is for informational purposes regarding standards development and is not a solicitation for bids.

Industrial Valve Manufacturing

POSTED

DEADLINE

MIL-STD-769K w/ Change 2, Insulation Requirements for U.S. Naval Vessels

Solicitation # N0002426SN-66

The Naval Sea Systems Command is developing draft specifications for MIL-STD-769K w/ Change 2, which outlines insulation requirements for U.S. Naval Vessels. The objective of this effort is to establish standards that support a wide range of design solutions and processes while encouraging a diverse vendor base. Interested parties may request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 23, 2026, and the final version will be available via ASSIST Online. This notice is for informational purposes and does not constitute a solicitation.

Roofing, Siding, and Insulation Material Merchant Wholesalers

POSTED

DEADLINE

MIL-DTL-18110H, Valves, Gate-Type, Steel, Sizes 2½ to 16 Inches

Solicitation # N0002426SN-63

The Naval Sea Systems Command is developing draft specifications and standards for MIL-DTL-18110H, which covers steel gate-type valves ranging from 2.5 to 16 inches. This initiative aims to support a diverse range of design solutions and encourage a broad vendor base. Interested parties can request copies of the document by emailing CommandStandards@navy.mil with the document number. This action is a special notice and not a formal solicitation. The review period for the draft document concludes on October 19, 2026, and the final version will be available via ASSIST Online. The project is managed by Navsea HQ within the Department of Defense under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

Low Profile Mast and Rotational Module Component Prototype Other Transaction Area of Interest

Solicitation # N00024-26-R-6215

The Submarine Electromagnetic Systems Program Office (PMS 435) has issued a competitive Area of Interest (AOI) announcement under solicitation N00024-26-R-6215 to accelerate the design, development, and prototyping of a next-generation Low Profile Mast (LPM) Type 24 Mod 1 and Rotational Module (RM) component. These components are critical for providing all-weather infrared imaging and radio frequency processing for fleet submarines via the AN/BVY-1 Integrated Submarine Imaging System while minimizing radar and optical signatures. The Navy is utilizing the Other Transaction Authority pathway under 10 U.S.C. Section 4022 to award one or more prototype projects. The procurement follows a three-phase competitive process: Phase I involves the submission of White Papers and Placemats, Phase II consists of technical pitches, and Phase III requires a full Prototype Proposal. Eligible participants must be businesses owned in the United States, United Kingdom, or Australia, or enter into a teaming arrangement with such entities. Access to restricted Controlled Unclassified Information (CUI) and Secret-level Government Furnished Information requires a signed Terms of Use Agreement and compliance with ITAR and NISPOM security standards. Key deadlines include Q&A submissions by October 2, 2026, DoD SAFE link requests by October 13, 2026, and final Phase I submissions by October 20, 2026. Phase I submissions must include a five-page technical solution concept, cost estimates for a prototype and two pre-production units, and an Affirmation of Business Status Certification identifying the firm as either a Traditional or Non-Traditional Defense Contractor. Evaluation is based on technical solution concepts and maturity paths, with the final award determined by the results of the multi-phase evaluation.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

BROAD AGENCY ANNOUNCEMENT - BIOMEDICAL RESEARCH AND DIVING EQUIPMENT DEVELOPMENT

Solicitation # N0002427S0001

Naval Sea Systems Command (NAVSEA) is soliciting pre-proposals and full proposals through Broad Agency Announcement N00024-27-S-0001 for applied biomedical research and diving equipment development. The program focuses on enhancing diver health, safety, and performance, advancing deep diving capabilities, and optimizing submariner survivability during disabled submarine events. Key areas of interest include improving breathing gas supplies, human performance mitigations for oxygen toxicity and narcosis, environmental protection, decompression models, and the development of tools for underwater communication and tracking. Additionally, the program seeks innovations in submarine escape and rescue, specifically regarding atmospheric assessment, thermal stress mitigation, and the care of rescue casualties. The solicitation utilizes a two-phase selection process. For Fiscal Year 2028, pre-proposals are due by November 30, 2026, with full proposals due by March 30, 2027. For Fiscal Year 2029, pre-proposals are due by November 30, 2027, with full proposals due by March 30, 2028. While there is no mandatory budget ceiling, historical awards average around 300,000 dollars annually, and projects typically span two to three years. Submissions are evaluated based on innovation, scientific merit, relevance to Navy operations, affordability, and the likelihood of success. All offerors must be registered in the System for Award Management and comply with specific regulations regarding human and animal research if applicable.

Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

DEADLINE

in about 1 year

MIL-PRF-32307B, Valve, Quarter Turn, Triple-Offset, Torque Seated, for Shipboard use

Solicitation # N0002426SN-62

The Naval Sea Systems Command (NAVSEA) is developing draft specifications and standards for MIL-PRF-32307B, which covers quarter turn, triple-offset, torque seated valves for shipboard use. The objective is to establish standards that support a diverse range of design solutions and processes to encourage a broad vendor base. This action is a special notice and not a formal solicitation for contracts. Interested parties may request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 19, 2026, and the final version will be made available through ASSIST Online. The effort is managed by Navsea HQ in Washington Navy Yard, DC, under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

MIL-DTL-60680B, Thruster, Cartridge Actuated, M16 Remanufactured Metal Parts Assembly

Solicitation # N0002426SN-61

The Naval Sea Systems Command is developing draft specifications and standards for MIL-DTL-60680B, which pertains to the M16 Remanufactured Metal Parts Assembly for cartridge actuated thrusters. This initiative aims to support a diverse range of design solutions and processes while encouraging a broad vendor base. Interested parties can request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 19, 2026, and the final version will be available via ASSIST Online. This notice is for informational purposes and does not constitute a formal solicitation.

National Security

POSTED

DEADLINE

MIL-DTL-46559D, Initiator, Cartridge Actuated, M3A2, Metal Parts Assembly

Solicitation # N0002426SN-65

The Naval Sea Systems Command is developing draft specifications and standards for the MIL-DTL-46559D Initiator, Cartridge Actuated, M3A2, Metal Parts Assembly. This initiative aims to support a diverse range of design solutions and processes while encouraging a broad vendor base. Interested parties can request copies of the document by emailing CommandStandards@navy.mil with the specific document number. This notice is not a solicitation, but rather a call for review. The review period concludes on October 23, 2026, and the final document will be available via ASSIST Online. The action is managed by Navsea HQ under the Department of Defense, with the associated NAICS code 928110.

National Security

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS