Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Domestic and International Export Compliance

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires strict adherence to U.S. export control regulations under 50 U.S.C. Chapter 58 and Department of Defense Directive 5230.25, focusing on the proper handling, storage, and transmission of technical data and equipment subject to export restrictions. It mandates full compliance with Controlled Unclassified Information protocols, including accurate classification, labeling, and reporting of all CUI-related activities to ensure no unauthorized access or dissemination occurs domestically or internationally. The subcontractor must implement and maintain robust internal procedures to identify, monitor, and document all export-controlled items and data throughout the project lifecycle. The contract is a Small Business Set Aside under NAICS code 541611, designated for services related to administrative management and general management consulting, and is issued by the Department of Defense under the office W6QK Acc- Dta. The response deadline is September 14, 2026, with a solicitation posted on July 31, 2026, and performance location unspecified. While no point of contact details are provided, the requirement for export compliance extends to all personnel involved, emphasizing training, audits, and timely reporting of any potential breaches or noncompliance events. All activities must be conducted with heightened awareness of national security implications and regulatory obligations tied to defense-related technical information.

General Info

Small Business Set Aside for defense-related CUI and export-controlled technical data management under strict U.S. export regulations.

Agency

Department Of Defense → W6QK Acc- DtaView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

MI, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc- Dta
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W6QK Acc- Dta
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Ensure compliance with 50 U.S.C. Chapter 58 and DoD Directive 5230.25 for technical data and equipment export controls, including CUI handling and reporting obligations.

Similar Contracts

Same NAICS industry code

NAICS: 541611
New
SLED
Small Business Participation Reporting & ComplianceThe contract requires comprehensive tracking, documentation, and reporting of subcontracting activities to ensure full compliance with the City of Phoenix Small Business Participation Plan and the DBE-N Program. This includes maintaining meticulous, audit-ready records that demonstrate adherence to state and local goals for small business and disadvantaged business enterprise participation across all qualifying projects under the Public Transit agency in Arizona. All subcontracting obligations must be monitored throughout the lifecycle of the work, with regular reporting to confirm that target participation rates are being met and that all necessary certifications and verifications are current and properly maintained. The work spans the period from the contract posting date in August 2026 through the response deadline in September 2026, with performance likely extending beyond this timeframe to cover ongoing project execution. The North American Industry Classification System code 541611 indicates the scope is related to management, scientific, and technical consulting services, suggesting the subcontracting activities involve professional services contracted by the transit agency. The contractor must ensure all processes are transparent, defensible, and fully aligned with Phoenix’s specific compliance frameworks, with an emphasis on accuracy, timeliness, and readiness for external audits or reviews by city officials or regulatory bodies.
Public Transit

POSTED

about 20 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 541611
New
SLED
Federal Education Fund Integrity CertificationThe Federal Education Fund Integrity Certification requires the contractor to conduct a thorough internal review and certification that all owners, officers, employees, and agents have not engaged in any fraud involving federal education funds or had their participation in Title IV programs revoked. This obligation applies across all levels of the organization and extends to any parties acting on its behalf, ensuring comprehensive compliance with federal integrity standards. The certification must be completed and submitted by the response deadline of August 14, 2026, and is tied to a subcontract under the NAICS code 541611, indicating the nature of the services provided relates to administrative management and general management consulting activities. The contract is issued by the University of Kansas and is part of its internal compliance framework to safeguard federal funding. While no specific set-aside provisions or geographic performance locations are detailed, the requirement is binding on the contractor as a condition of participation in any related federal education programs. Failure to properly certify or the discovery of false certifications may result in disqualification, termination of the subcontract, and potential legal consequences under federal oversight authorities. All parties involved must ensure accuracy and completeness in their disclosures to meet the legal and fiduciary responsibilities associated with handling federal education funds.
University Of Kansas

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
SLED
Cybersecurity & Access Control for Video NetworkThe contract titled Cybersecurity & Access Control for Video Network requires the implementation of a robust security framework to protect video sharing among authorized government agencies, with a primary focus on role-based access control to ensure only authenticated personnel can view or manage sensitive footage. It mandates the use of strong encryption protocols to safeguard data both at rest and in transit, intrusion detection systems to identify and respond to unauthorized access attempts, and comprehensive audit logging to maintain a verifiable record of all user activities and system events. These components must be integrated seamlessly into an existing or newly developed video network infrastructure to meet stringent security and compliance standards. The contract is structured as a subcontract under the Texas Department of Transportation, with a posted date of July 31, 2026, and a response deadline of August 24, 2026. It falls under NAICS code 541611, which corresponds to administrative management and general management consulting services, indicating a need for specialized cybersecurity expertise rather than hardware procurement. The place of performance and point of contact details are unspecified, but the solicitation is accessible via the Texas SmartBuy portal, suggesting the work may be performed remotely or at Texas DOT facilities. The absence of a set-aside designation means all eligible contractors may compete, and successful bidders must deliver a fully functional, auditable, and secure video sharing platform aligned with state and federal cybersecurity best practices.
Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in 23 days
View Details
NAICS: 541611
New
SLED
Small Business and Supplier Diversity Compliance (Administrative Support)The contract requires administrative support to assist a prime contractor with supplier diversity reporting and compliance, focusing specifically on obligations under Executive Order 11246 that may be triggered by the use of federal funds, even though no formal small business set-asides are in place. The work centers on ensuring accurate documentation, timely submissions, and adherence to federal reporting standards related to minority, women-owned, and other disadvantaged business enterprises, with an emphasis on maintaining compliance without the framework of reserved contracting opportunities. Performance of the contract will be based in Boston, Massachusetts, and the North American Industry Classification System code 541611 indicates the nature of the services involves management consulting, particularly in the administrative and compliance domain. The solicitation is classified as a subcontract and was posted on July 31, 2026, with a response deadline of August 19, 2026. The contracting authority is the Massachusetts agency under the 400000 - Procurement & Logistics designation, and while the exact point of contact details are not provided, the requirement is focused entirely on supporting the prime contractor’s federal compliance obligations through diligent administrative oversight and recordkeeping.
400000 - Procurement & Logistics

POSTED

about 22 hours ago

DEADLINE

in 18 days
View Details
NAICS: 541611
New
SLED
Small Business and Minority Subcontractor Reporting ComplianceThe contract requires administrative support to ensure compliance with Florida Fish and Wildlife Conservation Commission’s subcontracting reporting obligations, specifically focusing on the preparation and timely submission of the Subcontractor Minority Status Report alongside each invoice. This task is critical to maintaining adherence to state-mandated reporting standards for small business and minority subcontractors, and the contractor must maintain accurate records and ensure all data submitted aligns with current regulatory requirements. The work is tied directly to the invoicing cycle, demanding consistent and meticulous attention to detail to avoid delays or noncompliance penalties. The solicitation, posted on July 31, 2026, with a response deadline of September 10, 2026, falls under NAICS code 541611 for management consulting services and is categorized as a subcontracting opportunity. While no specific set-aside designation is provided, the emphasis on minority subcontractor reporting indicates a focus on promoting equitable participation in state-funded projects. The work is performed in support of the Florida Fish and Wildlife Conservation Commission, with no designated physical place of performance specified, allowing for remote or virtual execution of administrative duties. The contractor must be prepared to interact with internal systems and reporting templates used by the agency to ensure seamless integration of subcontractor data into the invoicing process.
Florida Fish and Wildlife Conservation Commission

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → W6QK Acc- Dta

Same awarding agency

NAICS: 541330
New
Federal
Technical Data Package Compliance and Configuration ManagementThe contract requires full compliance with Government Technical Data Packages to ensure all manufactured units meet specified technical and performance standards, with strict oversight of engineering changes and configuration management practices aligned with SAE EIA-649-1. The contractor is responsible for identifying and resolving all data discrepancies, maintaining accurate and up-to-date configuration documentation throughout the product lifecycle, and ensuring that any modifications to design or production are properly controlled and recorded. This includes proactive coordination to prevent deviations and maintain traceability across all technical data and production outputs. This is a Small Business Set Aside subcontract under the NAICS code 541330, awarded by the Department of Defense’s W6QK Acc- Dta office, with responses due by September 14, 2026. The work is associated with defense-related manufacturing and technical data management, requiring rigorous adherence to federal configuration management standards. The subcontract is open to qualified small businesses, and performance location details are not specified, implying potential flexibility in facility location as long as contractual obligations are met. All activities must support the defense mission through precise, auditable, and compliant technical data governance.
Engineering Services

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334515
New
Federal
W912CH-26-B-A002: TESTING KIT, AVIATION PETROLEUM (NSN 6630-01-558-5109)
Solicitation # W912CH26BA002_TESTINGKITAVIATIONPETROLEUM
The Army Contracting Command-Detroit Arsenal is seeking to award a single, five-year Firm-Fixed-Price Indefinite Delivery Indefinite Quantity contract for the supply of Testing Kits, Aviation Petroleum (NSN: 6630-01-558-5109, PN: 57K6311), with a guaranteed minimum order of fifteen units to be placed at contract award and a maximum allowable order of five hundred sixteen units over the entire five-year period inclusive of option years. This procurement is structured as a Small Business Set Aside under NAICS Code 334515 with a small business size standard of 750 employees and will be evaluated on a Lowest Price Technically Acceptable basis, meaning award will be made to the responsible bidder offering the lowest price that meets all technical requirements, with no trade-offs allowed between price and non-price factors. All bids must be submitted electronically via the PIEE Solicitation Module or email by 11:30 a.m. local time on September 14, 2026, in strict compliance with the instruction requirements, including completing all necessary representations and certifications in Section K, such as those related to the Buy American Act, prohibited telecommunications equipment, women-owned business status, and responsibility matters, while also ensuring adherence to the Technical Data Package (TDP), accessible only to Department of War and authorized contractors under Distribution Code A, which must be reviewed prior to bid submission or the bid will be rejected. The contract requires delivery within 180 days of award for each ordering year, with annual delivery quantities ranging from 102 to 108 units, and the final destination being the US Army Sierra Army Depot in Herlong, California, with deliveries split equally between two designated Army plants. FOB Destination terms apply, placing full transportation responsibility on the contractor, and all units must be packaged, preserved, and marked in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and ISPM-15 standards, including Unique Item Identification (UII) using ISO/IEC 15434 and ISO/IEC 15418 barcoding protocols, with wood packaging materials heat-treated and marked per ALSC guidelines. Inspection and acceptance occur at the contractor’s facility, requiring the contractor to provide full access to production and quality records and submit certifications of conformance under FAR 52.246-
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336360
New
Federal
BOAST RFOP - FRAME, SEAT, VEHICULAR / NSN: 2540-01-414-7899
Solicitation # PANDTA-25-P-0000_026840
The Army Contracting Command - Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track program for a Firm-Fixed-Price order of 26 vehicular seat frames, identified by NSN 2540-01-414-7899 and part number 12933517, under a Total Small Business Set-Aside. Only vendors with a fully executed BOAST Basic Ordering Agreement in place by the closing date of August 24, 2026, are eligible for award, and the procurement is governed by a price-only evaluation methodology under the Lowest Price Technically Acceptable model. The requirement involves manufacturing components to strict military specifications, including compliance with MIL-DTL-53072 for Chemical Agent Resistant Coating and MIL-DTL-16232 for phosphate coating, with First Article Testing due within 90 days of award and full production delivery within 225 days after FAT approval. Inspection and acceptance occur at the vendor’s facility, while the FOB point is Destination, with final delivery directed to DLA Distribution Red River in Texarkana, Texas. All items must be packaged and marked per MIL-STD-2073-1 and MIL-STD-129, using Special Packaging Instruction #12933517 Revision C, with military-grade preservation and ISPM-15 compliant wood packaging marked with HT or DH treatment codes. Each unit requires a Unique Item Identifier per DFARS 252.211-7003, and all packaging must exclude sensitive materiel identification. Access to the Controlled Technical Data Package requires individual JCP certification, with DD Form 2345 submitted to the U.S./Canada Joint Certification Office. The contract mandates full compliance with ISO 9001:2015 quality standards, applies security requirements including annual CIAR briefings for privileged personnel, and restricts specialty metals to qualifying countries. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment, and offerors must affirm their small business status, with no trade-offs permitted beyond price. An unexercised option for an additional 26 units is included but not currently obligated.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 336992
New
Federal
BOAST RFOP - Track Shoe Set, Vehicular - NSN: 2530-00-150-5895
Solicitation # PANDTA-25-P-0000_010369
Army Contracting Command - Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track program for a Firm-Fixed-Price Order of 89,216 Track Shoe Sets, Vehicular (NSN 2530-00-150-5895, Part Number 5704208), with two optional 12-month periods of 65,569 units each, to be delivered within 270 calendar days after receipt of order. This is a Full and Open competition restricted exclusively to vendors with a fully executed BOAST Basic Ordering Agreement in place by the proposal deadline of July 29, 2026; failure to meet this requirement renders proposals ineligible regardless of price or other factors. Award will be made to the lowest-priced responsive offeror, with evaluation based solely on price reasonableness. The item is subject to export control, requiring vendors to be certified in the Joint Certification Program to access the Technical Data Package, and unregistered vendors must submit DD Form 2345 to the U.S./Canada Joint Certification Office prior to proposal submission. All supplies must be manufactured and delivered in accordance with strict military specifications including MIL-STD-2073-1 for preservation and packing, MIL-STD-129 for marking, and ISPM 15 for wood packaging materials, with unique item identification and government-assigned serial numbers applied per applicable DFARS clauses. Inspection and acceptance occur at origin using MIL-STD-1916 with verification levels of VL-1 for major characteristics and VL-2 for minor characteristics. Packaging and labeling must omit identification of the item’s nature where applicable, and all hazardous material shipments must comply with IATA, IMDG, and CFR Titles 29, 40, and 49. Contractors must comply with OPSEC requirements under AR 530-1, complete awareness training, and adhere to NIST SP 800-171 DOD Assessment Requirements. Performance shall be shipped to Texarkana, Texas under FOB Destination terms, and payment must be submitted electronically through Wide Area Workflow. Data deliverables including Engineering Change Proposals, Requests for Variance, and Notices of Revision must conform to specified CDRLs and be submitted in Microsoft Office or PDF format to the Procuring Contracting Officer with copies to the Administrative Contracting Office and Engineering POC. Contractors must be registered in SAM, possess a valid C
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details